Selectively Dendronized Cellulose: Synthesis and Characterization

Selectively dendronized cellulose at C‐6 was synthesized homogeneously (in DMSO) and heterogeneously (in methanol) by the conversion of 6‐azido‐6‐deoxy cellulose (degree of substitution, DS 0.75) with polyamidoamine (PAMAM) dendrons possessing an ethynyl focal moiety via the copper‐catalyzed Huisgen reaction (click reaction) under mild conditions. First to third generation of PAMAM‐triazolo cellulose derivatives with DS values of up to 0.69 could be prepared, which are soluble in organic solvents (DMSO, DMF) and in water. The novel biopolymer derivatives were characterized by elemental analysis, FTIR, and NMR spectroscopic methods, showing no impurities and no conversion at the secondary positions.

     

Click Chemistry with Polysaccharides

Summary: The copper‐catalyzed Huisgen reaction as a typical example of click chemistry was realized with the polysaccharide cellulose for the first time. The generality, selectivity, and the efficiency of click chemistry perfectly fit the requirements of polysaccharide modification, which is demonstrated by the introduction of triazole‐spacer bound functional groups, i.e., carboxylic ester, thiophene, and aniline moieties. Azide moieties introduced into cellulose via the tosyl derivative were simply transferred with ethynyl compounds under Cu(I) catalysis and mild and easily applicable conditions. Hydrolytically stable cellulose derivatives soluble in organic solvents, e.g., DMSO or DMF with DS up to 0.9 are obtained. The triazole substituted cellulose derivatives were characterized by elemental analysis, FTIR, ¹H NMR, and ¹³C NMR spectroscopies and show no impurities or substructures resulting from side reactions.

6‐Azido‐6‐deoxy cellulose.     

Regioselective Dendritic Functionalization of Cellulose

Summary: A series of regioselectively dendronized cellulose derivatives has been prepared by the treatment of cellulose in a N,N‐dimethylacetamide/LiCl solvent system with dendrons possessing isocyanate focal substituents. These new materials were characterized using FT‐IR and ¹³C NMR spectroscopies, and thermogravimetric analysis; the products were highly soluble in a wide range of organic solvents.

Substitution pattern of the dendronized cellulose.     

Synthesis and Characterization of Water‐Soluble Cellulose Derivatives with Thermo‐ and pH‐Sensitive Functional Groups

A series of water‐soluble cellulose derivatives with thermo‐ and pH‐sensitive properties were prepared in aqueous solutions by the graft copolymerization of N‐isopropylacrylamide (NIPAAm) on carboxymethylcellulose (CMC). Ceric ammonium nitrate (CAN) was used in combination with nitric acid as the initiator system. The effects of various factors such as CAN concentration, NIPAAm and CMC amounts as well as reaction temperature on the grafting percentage and efficiency were studied. The resultant cellulose derivatives were characterized with respect to their structure and aqueous solution properties by IR spectra, thermogravimetric analyses and optical transmittance measurements.     

Novel Biopolymer Structures Synthesized by Dendronization of 6‐Deoxy‐6‐aminopropargyl cellulose

Propargyl cellulose with regioselective functionalization pattern was synthesized by nucleophilic displacement reaction of 6‐O‐toluenesulfonyl ester of cellulose (degree of substitution, DS 0.58) with propargyl amine. The novel 6‐deoxy‐6‐aminopropargyl cellulose provides an excellent starting material for the selective dendronization of cellulose at position 6 via the copper‐catalyzed Huisgen reaction yielding 6‐deoxy‐6‐amino‐(4‐methyl‐[1,2,3‐triazolo]‐1‐propyl‐polyamido amine) cellulose derivatives of first‐ (DS 0.33) and second (DS 0.25) generation, which are soluble in polar aprotic solvents. The novel biopolymer derivatives were characterized by elemental analysis, FT‐IR spectroscopy, and one‐ and two dimensional NMR spectroscopy, showing no side reactions (cross‐linking) or impurities and no conversion at the secondary positions.

     

Silylated Cellulose Materials in Design of Supramolecular Structures of Ultrathin Cellulose Films

Abstract

To use the structure-forming potential and the biodegradability of cellulose and nonionic cellulose ethers, we developed synthesis pathways for soluble and regenerable silyl celluloses suitable for the design of advanced materials. A 6-0-silylation of cellulose takes place in a heterogeneous phase reaction in the presence of ammonia-saturated polar aprotic solvents at ?15°C with thexyldimethylchlorosilane. After 2,3-di-O-methylation, this type of regioselectively-substituted cellulose derivatives yields sensor matrices for the detection of halohydrocarbons in air. On the other hand, thexyldimethylsilyl celluloses and trimethylsilyl celluloses with degrees of substitution in the 2.6 to 3.0 range form mono-and multilayered supramolecular structures by applying the Langmuir–Blodgett technique and, after desilylation, oriented ultrathin cellulose films.     

Efficient Homogeneous Chemical Modification of Bacterial Cellulose in the Ionic Liquid 1‐N‐Butyl‐3‐methylimidazolium Chloride

Summary: Bacterial cellulose (BC), a unique type of cellulose, with high degree of polymerization of 6 500 could be dissolved easily in the ionic liquid 1‐N‐butyl‐3‐methylimidazolium chloride. For the first time, well‐soluble BC acetates and carbanilates of high degree of substitution (up to a complete modification of all hydroxyl groups) were accessible under homogeneous and mild reaction conditions. Characterization of the new BC derivatives by NMR and FTIR spectroscopy shows an unexpected distribution of the acetyl moieties in the order O‐6 > O‐3 > O‐2.

¹³C NMR spectrum (DMSO‐d₆) of a cellulose acetate with a DS of 2.25 synthesized in 1‐N‐butyl‐3‐methylimidazolium chloride.     

Novel Bioactive Amino‐Functionalized Cellulose Nanofibers

Amino‐cellulose‐based nanofibers are prepared by electrospinning of blended solutions of 6‐deoxy‐6‐trisaminoethyl‐amino (TEAE) cellulose and polyvinyl alcohol (PVA). The TEAE cellulose with a degree of substitution of 0.67 is synthesized via a nucleophilic displacement reaction starting from cellulose‐p‐toluenesulfonic acid ester. Several solution characteristics such as polymer concentration, electrical conductivity, and surface tension as well as setup parameters are investigated to optimize the ability of nanofiber formation. These parameters are evaluated using the rheological studies of the solutions. The nanofibers obtained are characterized by scanning electron microscopy (SEM) and show a high antimicrobial activity against Staphylococcus aureus and Klebsiella pneumoniae.

     

Ionic‐Liquid‐Derived,Water‐Soluble Ionic Cellulose

A new type of water‐soluble ionic cellulose was obtained by means of the dissolution of cellulose in dimethylimidazolium methylphosphite at elevated temperatures over 120 °C. FTIR spectroscopy, ¹H and ¹³C NMR spectroscopy, and elemental analysis results revealed that the repeating unit of the water‐soluble cellulose consists of a dialkylimidazolium cation and a phosphite anion bonded to cellulose. The degree of phosphorylation on the cellulose chain was between 0.4 and 1.3 depending on the reaction temperature and time. With an increasing degree of phosphorylation, water solubility was increased. Scanning electron microscopy and X‐ray diffraction analyses revealed that the cellulose crystalline phase in the parent crystalline cellulose changed to an amorphous phase upon transformation into ionic cellulose. Thermogravimetric analysis showed the prepared phosphorylated cellulose was stable over 250 °C and a substantial amount of residue remained at 500 °C.     

First Synthesis of 3‐O‐Functionalized Cellulose Ethers via 2,6‐Di‐O‐Protected Silyl Cellulose

The present paper describes the synthesis of 2,6‐di‐O‐thexyldimethylsilyl cellulose as a novel 2,6‐di‐O‐protected cellulose derivative. This material was obtained by reacting cellulose in N,N‐dimethylacetamide/LiCl solution with thexyldimethylchlorosilane and imidazole for 24 h at 100°C. In a typical subsequent reaction the residual OH‐group in position 3 could be completely etherified without loss of any protecting groups. Treatment with tetrabutylammonium fluoride leads to the novel compounds 3‐O‐allyl and 3‐O‐methyl cellulose. The structures of all polymers are revealed by means of one‐ (¹H and ¹³C) and two‐dimensional (COSY and HMQC) NMR techniques.     

Poly(4‐acryloylmorpholine) oligomers carrying a β‐cyclodextrin residue at one terminus

A straightforward synthesis of amphiphilic β‐cyclodextrin‐poly(4‐acryloylmorpholine) (β‐CD‐PACM) polymers of controlled molecular weight, consisting of the radical polymerization of 4‐acryloylmorpholine in the presence of 6‐deoxy‐6‐mercapto‐β‐cyclodextrin (β‐CD‐SH) as chain‐transfer agent, has been established. These derivatives carry a single β‐cyclodextrin (β‐CD) moiety at one terminus and their average molecular weight is in the order of 10⁴. Thus, their β‐CD content is ～ 10% by weight. No evidence of un‐functionalized PACM was found in the final products. The chain‐transfer constant (C_T) of β‐CD‐SH was found to be 1.30 by independently determining the reaction constants of both chain‐transfer and propagation reactions. This ensures that the molecular weight, hence the β‐CD content of the polymers, does not significantly vary with conversion. These β‐CD‐PACM polymers are highly soluble in water as well as in several organic solvents such as chloroform and lower alcohols. They proved capable of solubilizing in water poorly soluble drugs such as 9‐[(2‐hydroxyethoxy)methyl]guanine (Acyclovir) and of gradually releasing them in aqueous systems. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1607–1617, 2008     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of Novel Cellulose Carbamates Possessing Terminal Amino Groups and Their Bioactivity

Cellulose phenyl carbonates are an excellent platform to synthesize a broad variety of soluble and functional cellulose carbamates. In this study, the synthesis of cellulose carbamates with terminal amino groups, namely ω‐aminoethylcellulose‐ and ω‐aminoethyl‐p‐aminobenzyl‐cellulose carbamate, is discussed. The products are well soluble and their structures can be clearly described by NMR spectroscopy. The cellulose carbamates exhibit a bactericide and fungicide activity in vitro. The ω‐aminoethylcellulose carbamate possesses a strong activity against Candida albicans and Staphylococcus aureus (IC₅₀ of 0.02 mg mL^?1 and 0.05 mg mL^?1). The antimicrobial activity and cytotoxicity can be improved by p‐amino‐benzylamine (ABA) as an additional substituent. The mixed cellulose carbamate exhibits a high biocompatibility (LC₅₀ of 3.18 mg mL^?1) and forms films on cotton and PES, which exhibit a strong activity against S. aureus and Klebsiella pneumoniae.

     

New Metallo-Supramolecular Terpyridine-Modified Cellulose Functional Nanomaterials

New metallo-supramolecular nanocellulosic derivatives were prepared by surface modification of cellulose nanocrystals with 4-chloro-2,2′:6′,2″-terpyridine and subsequent coupling with other terpyridine-functionalized derivatives via Ru^III/Ru^II reduction. The terpyridine-modified cellulose nanocrystals (CTP) were characterized using transmission electron microscopy (TEM), magic angle spinning ¹³C nuclear magnetic resonance (MAS-¹³C NMR), elemental analysis, as well as Fourier transform infrared (FTIR) and UV-Visible spectroscopy. Metallo-CTP with different optical properties, and expected magnetic and catalytic properties, were easily obtained upon reaction of the prepared CTP with different di- and trivalent transition metal ions (Fe⁺², Mn⁺², Co⁺², and Ru⁺³). Metallo-supramolecular nanocellulosic derivatives with different properties were prepared by subsequent coupling of Ru^III-CTP complex with other terpyridine ligands bearing different functionalities.     

Synthesis and properties of O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl cellulose

In this article, a series of O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl celluloses with different degree of substitution (DS) values was synthesized by a homogeneous reaction of cellulose with 2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl chloride in a 10% (w/w) dimethylacetamide/lithium chloride solution, combined with pyridine as the acid acceptor. The total DS values of the derivatives in anhydroglucose units was determined by ¹H and ¹³C NMR spectra, and ranged from 0.4 to 3.0, depending on the amount of acid chloride in the reaction. The effects of the total DS values and the O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl substituent distribution on the solubility of the derivatives were investigated. The lowest limit of the DS value for water‐soluble O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl cellulose was approximately 0.5, which is lower than that of methylcellulose. The amphiphilic derivatives with higher DS values than 1.7 exhibited a good solubility in both water and organic solvents, such as dimethyl sulfoxide, tetrahydrofuran, and chloroform. Sol‐gel transition in aqueous solution was observed for the amphiphilic derivatives with a higher DS value than 1.7; the precipitation temperature (T_p) decreased as the DS value increased, showing that the derivatives are highly temperature sensitive. The thermal properties of the fully substituted derivative were measured using polarized microscopy, DSC, and X‐ray diffraction; and are discussed in terms of phase transition of the sample derivatives. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 376–382, 2001     

Acylation of Cellulose with N,N′‐Carbonyldiimidazole‐Activated Acids in the Novel Solvent Dimethyl Sulfoxide/Tetrabutylammonium Fluoride

Summary: Carboxylic acids were efficiently activated with N,N′‐carbonyldiimidazole (CDI) and applied for the acylation of cellulose under homogeneous conditions using dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF) as solvent. The simple and elegant method is a very mild and easily applicable tool for the synthesis of pure aliphatic, alicyclic, bulky, and unsaturated cellulose esters with degrees of substitution of up to 1.9. Products are soluble in organic solvents, e.g., DMSO or N,N‐dimethylformamide (DMF). The cellulose esters were characterized by elemental analysis, FT‐IR, ¹H and ¹³C NMR spectroscopy and show no impurities or substructures resulting from side reactions.

The esterification of cellulose using carboxylic acids activated in situ with N,N′‐carbonyldiimidazole.     

Pteridines. Part CXVIII

Our approach to achieve a partial synthesis of methanopterin ( 1 ) started from 6‐acetyl‐O⁴‐isopropyl‐7‐methylpterin ( 20 ) which was obtained either by condensation from 6‐isopropoxypyrimidine‐2,4,5‐triamine ( 19 ) and pentane‐2,3,4‐trione ( 6 ) or from 6‐isopropoxy‐5‐nitrosopyrimidine‐2,4‐diamine ( 21 ) and pentane‐2,4‐dione (=acetylacetone; 22 ) (Scheme 2). NaBH₄ reduction of 20 led to 6‐(1‐hydroxyethyl)‐O⁴‐isopropyl‐7‐methylpterin ( 23 ) which was converted into the corresponding 6‐(1‐chloroethyl) and 6‐(1‐bromoethyl) derivatives 24 and 25 . A series of nucleophilic displacement reactions in the side chain and at position 4 were performed as model reactions to give 26 – 29, 32 – 35 , and 39 – 41 . Hydrolysis of the substituents at C(4) led to the corresponding pterin derivatives 30, 31, 36 – 38 , and 42 . Analogously, 25 reacted with 1‐(4‐aminophenyl)‐1‐deoxy‐2,3: 4,5‐di‐O‐isopropylidene‐D ‐ribitol ( 43 ), prepared from N‐(4‐bromophenyl)benzamide ( 47 ) via 49 and 50 to give 1‐{4‐{{1‐[2‐amino‐7‐methyl‐4‐(1‐methylethoxy)pteridin‐6‐yl]ethyl}amino}phenyl}‐1‐deoxy‐D ‐ribitol ( 44 ) in 62% yield (Scheme 3). Acid cleavage of the isopropylidene groups at room temperature led to 45 and on boiling to 1‐{4‐{[1‐(2‐amino‐3,4‐dihydro‐7‐methyl‐4‐oxopteridin‐6‐yl)ethyl]amino}phenyl}‐1‐deoxy‐D ‐ribitol ( 46 ). The next step, however, attachment of the ribofuranosyl moiety with 55 or 56 to the terminal 1‐deoxy‐D ‐ribitol OH group could not been achieved. The second component, bis(4‐nitrobenzyl) 2‐{[(2‐cyanoethoxy)(diisopropylamino)phosphino]oxy}pentanedioate ( 61 ), to built‐up methanopterin ( 1 ) was synthesized from 2‐hydroxypentanedioic acid ( 59 ) and worked well in another model reaction on phosphitylation with N⁶‐benzoyl‐2′,3′‐O‐isopropylideneadenosine and oxidation to give 62 (Scheme 6).     

Studies on Non-natural Deoxyammonium Cellulose

Summary: Ammonium group containing cellulose derivatives are prepared from homogeneously synthesized cellulose p-toluenesulfonic acid esters (tosyl cellulose) by conversion with sodium azide and subsequent reduction of the azido moiety applying NaBH₄/CoBr₂/2,2′-bipyridine as reagent. Regarding the tosylation, cellulose samples of different degree of polymerization and hemicellulose content possess a different reactivity. The deoxyamino cellulose is water soluble in the protonated state. Elemental analysis, FTIR- and NMR spectroscopy were carried out to analyze the degree of substitution and functionalization pattern. It was also studied to synthesize deoxyazido celluloses without isolation of the tosyl cellulose. However, a predominant formation of deoxychloro moieties occurs.     

Cucurbit[7]uril: A High‐Affinity Host for Encapsulation of Amino Saccharides and Supramolecular Stabilization of Their α‐Anomers in Water

Cucurbit[7]uril (CB[7]), an uncharged and water‐soluble macrocyclic host, binds protonated amino saccharides (D ‐glucosamine, D ‐galactosamine, D ‐mannosamine and 6‐amino‐6‐deoxy‐D ‐glucose) with excellent affinity (K_a=10³ to 10⁴ M ^?1). The host–guest complexation was confirmed by NMR spectroscopy, isothermal titration calorimetry (ITC), and MALDI‐TOF mass spectral analyses. NMR analyses revealed that the amino saccharides, except D ‐mannosamine, are bound as α‐anomers within the CB[7] cavity. ITC analyses reveal that CB[7] has excellent affinity for binding amino saccharides in water. The maximum affinity was observed for D ‐galactosamine hydrochloride (K_a=1.6×10⁴ M ^?1). Such a strong affinity for any saccharide in water using a synthetic receptor is unprecedented, as is the supramolecular stabilization of an α‐anomer by the host.     

Effect of catalyst systems and reaction conditions on the synthesis of cellulose‐g‐PDMAam copolymers by controlled radical polymerization

Various copper‐based catalyst systems and reaction conditions were studied in the graft copolymerization of N,N‐dimethylacrylamide (DMAam) with a cellulose‐based macroinitiator by controlled radical polymerization. The cellulose macroinitiator with degree of substitution DS = 0.44 was synthesized from dissolving softwood pulp in a LiCl/DMAc solution. The graft copolymerizations of DMAam, using the cellulose macroinitiator and various copper‐based catalyst systems, were then carried out in DMSO solutions. The copolymerization kinetics was followed by ¹H NMR. Water‐soluble cellulose‐g‐PDMAam copolymers were comprehensively characterized by ATR‐FTIR and ¹H NMR spectroscopies and SEC analyses. DLS and steady‐shear viscosity measurements revealed that when the DP_graft of the cellulose‐g‐PDMAam copolymer is high enough, the copolymer forms a more compact structure in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012