横观各向同性热电材料简支矩形板的自由振动

从耦合的三维压电热弹性理论出发分析了横观各向同性热电材料简支矩板的自由振动,证明其存在两类振动,即解耦的第一类振动和耦合的第二类振动,如果板的结构和上下表面边界条件关于中面对称,则第二类振动又可进一步分解为对称振和反对称振动,给出了热电材料简支矩形板自由振动的三维精确解,采用Ｍｏｎｔｅ Ｃａｒｌｏ法克服了超越方程求复根的困难。对于ＰＺＴ－４矩形板给出了数值结果,分析了耦合效应对振动频率的影响,计算     

On a method for determining the fixing conditions for a rectangular plate from the natural frequencies

We prove the duality of solutions for the problem of determining the boundary conditions on two opposite sides of a rectangular plate from the frequency spectrum of its bending vibrations. A method for determining the boundary conditions on two opposite sides of a rectangular plate from nine natural frequencies is obtained. The results of numerical experiments justifying the theoretical conclusions of the paper are presented. Rectangular plates are widely used in various technical fields. They serve as printed circuit boards and header plates, bridging plates, aircraft and ship skin, and parts of various mechanical structures [1–4]. If the plate fixing cannot be inspected visually, then one can use the natural bending vibration frequencies to find faults in the plate fixing. For circular and annular plates, methods for testing the plate fixing were found in [5–7], where it was shown that the type of fixing of a circular or annular plate can be determined uniquely from the natural bending vibration frequencies. The following question arises: Is it possible to determine the type of fixing of a rectangular plate on two opposite sides of the plate from the natural bending vibration frequencies if the other two sides are simply supported? Since the opposite sides of the plate are equivalent to each other, a plate with “rigid restraint—free edge” fixing will sound exactly the same as a plate with “free edge—rigid restraint” fixing. Hence we cannot say that the type of fixing of a rectangular plate on two opposite sides can be uniquely determined from its natural bending vibration frequencies. But it turns out that we can speak of duality in the solution of this problem. Here we observe an analogy with the problem of determining the rigidity coefficients of springs for elastic fixing of a string [8]: the rigidity coefficients of the springs are determined by the natural frequencies uniquely up to permutations of the springs.     

Topology optimization of a plate coupled with acoustic cavity

Optimization of the topology of a plate coupled with an acoustic cavity is presented in an attempt to minimize the fluid–structure interactions at different structural frequencies. A mathematical model is developed to simulate such fluid–structure interactions based on the theory of finite elements. The model is integrated with a topology optimization approach which utilizes the moving asymptotes method. The obtained results demonstrate the effectiveness of the proposed approach in simultaneously attenuating the structural vibration and the sound pressure inside the acoustic domain at several structural frequencies by proper redistribution of the plate material.Experimental verification is carried out by manufacturing topology optimized plates and monitoring their vibration and sound radiation into a rigid acoustic cavity. The measured sound pressure and plate vibration are found to be in good agreement with the predictions of the mathematical model.The presented theoretical and experimental techniques present valuable tools in the design of a wide variety of critical structures which must operate quietly when subjected to fluid loading.     

Static and free vibration analysis of four-parameter continuous grading elliptical sandwich plates

In the present study, the static and dynamic analyses of elliptical functionally graded sandwich(FGS) plates are investigated. The constituent materials of the sandwich plates are ceramic and metal so that the core is made of pure metal, while the face sheets consist of a combination of metal and ceramic according to a four-parameter power-law distribution. Different material profiles such as classic, symmetric, and asymmetric can be obtained using the applied generalized power-law distribution ...     

碳纳米管增强型复合材料功能梯度板的自由振动模型与尺度效应

基于一种新的各向异性修正偶应力理论,建立了碳纳米管增强复合材料功能梯度板的自由振动模型。该模型能够描述尺度效应,且仅包含一个尺度参数。基于一阶剪切变形理论和哈密顿原理推演了板的运动微分方程,并以四边简支板为例给出了自振频率的解析解。讨论了板的几何尺寸、碳纳米管体分比含量和分布方式等因素对板的自振频率的影响。结果表明,本文模型所预测的板的自振基频总是高于经典弹性理论的Mindlin板模型的预测结果,两者间的差异在板的几何尺寸接近尺度参数的值时非常明显,且会随着板的几何尺寸的增大而逐渐消失。     

Multi-modal approach for large natural flexural vibrations of thermally stressed plates

By means of Berger's approximation, suitable for plates with immovable edges, the geometrically nonlinear problem is considerably simplified. Thermally loaded plates with polygonal planform under hard-hinged support conditions are considered, taking into account the effect of shear in transverse isotropy. The class of symmetric vibrations about the flat plate position is represented by a homogeneous and coupled set of Duffing-oscillators as a result of a multi-mode expansion. A unifying non-dimensional closed-form solution for the corresponding nonlinear natural vibration periods is given, which is independent of the special planform. The individual shape of the plate enters the transformation into real time through the linear natural frequencies, or, equivalently, through the linear eigen-values of an effectively prestressed membrane of the same planform.     

Erratum to: Vibration Analysis of Perforated Plates Using Time-Average Digital Speckle Pattern Interferometry

Digital Speckle Interferometry is a non invasive full-field coherent optical technique used in mechanical vibration measurement. In this research, it is used for tuning resonant frequencies of vibrating plates in order to investigate the dynamical behavior of perforated plates. The plate was excited to resonant vibration by a sinusoidal acoustic source. Fringe pattern produced during the time-average recording of the vibrating plate, for several resonant frequencies were registered. Results of plates fixed at one edge having internal holes and attached masses are presented. Experimental natural frequencies and modal shapes are compared to those obtained by an analytical approximate solution based on the Rayleigh–Ritz method with the use of orthogonal polynomials as coordinate function. A high degree of correlation between computational analysis and experimental results was observed, proving the potentiality of the optical technique as experimental validation of the numerical simulations.     

Vibration Analysis of Perforated Plates Using Time-Average Digital Speckle Pattern Interferometry

Digital Speckle Interferometry is a non invasive full-field coherent optical technique used in mechanical vibration measurement. In this research, it is used for tuning resonant frequencies of vibrating plates in order to investigate the dynamical behavior of perforated plates. The plate was excited to resonant vibration by a sinusoidal acoustic source. Fringe pattern produced during the time-average recording of the vibrating plate, for several resonant frequencies were registered. Results of plates fixed at one edge having internal holes and attached masses are presented. Experimental natural frequencies and modal shapes are compared to those obtained by an analytical approximate solution based on the Rayleigh–Ritz method with the use of orthogonal polynomials as coordinate function. A high degree of correlation between computational analysis and experimental results was observed, proving the potentiality of the optical technique as experimental validation of the numerical simulations.     

Chebyshev collocation approach for vibration analysis of functionally graded porous beams based on third-order shear deformation theory

In this paper, vibration analysis of functionally graded porous beams is carried out using the third-order shear deformation theory. The beams have uniform and non-uniform porosity distributions across their thickness and both ends are supported by rotational and translational springs. The material properties of the beams such as elastic moduli and mass density can be related to the porosity and mass coefficient utilizing the typical mechanical features of open-cell metal foams. The Chebyshev collocation method is applied to solve the governing equations derived from Hamilton’s principle, which is used in order to obtain the accurate natural frequencies for the vibration problem of beams with various general and elastic boundary conditions. Based on the numerical experiments, it is revealed that the natural frequencies of the beams with asymmetric and non-uniform porosity distributions are higher than those of other beams with uniform and symmetric porosity distributions.     

黏弹性地基上功能梯度材料板的振动分析

为研究黏弹性地基上功能梯度材料板的自由和强迫振动特性,基于Reddy高阶剪切变形理论以及由Shen导得的广义Karman型方程,用双重Fourier级数法推导了三参数黏弹性地基上四边简支功能梯度材料板自由振动和动力响应的解析解,计算了各模态自振频率和半波冲击载荷作用下的动力响应,讨论了材料组分指数、黏弹性地基参数、边厚比等因素对自由振动和动力响应的影响.结果表明,黏弹性地基的剪切和压缩刚度显著提升了功能梯度材料板的振动频率,减小了动力响应;另外,地基的黏性对振动频率和动力响应也有一定的影响.     

厚薄板通用三角形广义协调元TCGC-T9的固有振动分析

研究了厚薄板通用三角形广义协调单元TCGC-T9的固有振动特性.通过编制程序,采用子空间迭代法求得不同板厚的前5阶固有频率值,并将计算结果与理论解和有限元软件ABAQUS的结果进行比较.结果表明:TCGC-T9单元在固有振动分析方面收敛速度快,数值稳定性好、实用性强(无需区分厚板和薄板).     

Determination of natural frequencies of vibration of a sandwich plate

In this paper, an expression is derived for the natural frequencies of vibration of a simply supported sandwich plate. Experimental procedures and results for the subject problem are presented. The experimental data obtained are in good agreement with the theoretical results. A literature survey^{1, 2} shows that no work has been done on the experimental determination of natural frequencies of vibration of sandwich plates. A general analysis of flexural vibrations of elastic sandwich plates was presented by Yu in Ref. 3. The vibration analysis based upon this theory is, in general, very complicated due to the high order of the equations. It was then simplified⁴ for low-frequency ranges and for ordinary sandwich plates.     

Free vibration of carbon nanotube reinforced composite plate on point Supports using Lagrangian multipliers

Chebyshev polynomial functions are used in the Lagrangian multipliers method to study the free vibration characteristics of rectangular moderately thick composite plates reinforced with carbon nanotubes (CNTs). Plate is resting on point supports. Distribution of CNTs across the plate thickness is considered to be either uniform or functionally graded. Properties of the plate are obtained using a refined rule of mixtures approach which includes the efficiency parameters to capture the size dependent characteristics of the composite plate. Using a Ritz solution method, an eigenvalue problem is established which results in natural frequencies and mode shapes of the plate. Based on the developed solution method, number and position of point supports are arbitrary and also various boundary conditions may be assumed for the four edges of the plate. After performing comparison studies for isotropic homogeneous plates on point supports, parametric studies are provided to explore the vibration characteristics of the carbon nanotube reinforced composite plates on point supports. It is shown that, frequencies of the plate increase as the volume fraction of CNTs increases.     

An efficient shear deformation theory for vibration of functionally graded plates

This paper presents an efficient shear deformation theory for vibration of functionally graded plates. The theory accounts for parabolic distribution of the transverse shear strains and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. The mechanical properties of functionally graded plate are assumed to vary according to a power law distribution of the volume fraction of the constituents. Equations of motion are derived from the Hamilton??s principle. Analytical solutions of natural frequency are obtained for simply supported plates. The accuracy of the present solutions is verified by comparing the obtained results with those predicted by classical theory, first-order shear deformation theory, and higher-order shear deformation theory. It can be concluded that the present theory is not only accurate but also simple in predicting the natural frequencies of functionally graded plates.     

复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法

基于一阶剪切变形理论,提出了复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法。计算时在复合材料层合板中面上仅需要布置一系列的离散节点,并利用这些节点构建插值函数。在板中面上的局部多边形子域上,采用加权余量法建立复合材料层合板自由振动分析的离散化控制方程,并且这些子域可由Delaunay三角形方便创建。自然邻接点插值形函数具有Kronecker delta函数性质,因而无需经过特别处理就能准确地施加本质边界条件。对不同边界条件、不同跨厚比、不同材料参数和不同铺设角度的复合材料层合板,由本文提出的无网格自然邻接点Petrov-Galerkin法进行自由振动分析时均可得到满意的结果。数值算例结果表明,本文方法求解复合材料层合板的自由振动问题是行之有效的。     

局部损伤复合材料层合板的振动分析

本文采用了一种改进方法对局部损伤复合材料层合板进行了振动分析,将复合材料板中的损伤模拟为局部刚度的削减,并取三个损伤因子来刻画损伤的特性．利用高阶摄动法对其自由振动方程进行求解,主要计算了损伤板的自然振动频率和振动模态．相较于一阶摄动展开法,该方法在计算局部较大损伤问题中具有更高的准确度和敏感度．最后对损伤问题进行了参数研究,分析了不同的损伤因子（包括局部损伤程度、方向、面积大小）对板自由振动频率的影响．该方法为二维板局部损伤检测提供了有效精确的理论依据,并为损伤的定量评价提供了一种思路．     

广义协调厚薄通用板单元的动力特性分析

推导了板的有限元运动方程,构造了单元刚度矩阵和考虑转动惯量的单元质量矩阵,并采用 子空间迭代法计算了板的前几阶频率,分析了广义协调厚薄通用板单元ATF-PQ4a的动力特 性,并讨论了转动惯量和剪切变形对固有频率的影响. 结果表明：ATF-PQ4a单元计算结果和 理论解及有限元软件ABAQUS的结果比较吻合,说明在动力学范围内ATF-PQ4a单元能做到厚 薄通用,满足工程需要.     

基于物理中面FGM中厚板自由振动的有限元分析

基于物理中面和一阶剪切变形板理论,研究了不同边界条件下功能梯度材料(FGM)中厚板的自由振动问题．假设功能梯度板的材料性质沿厚度方向按幂函数规律连续变化．根据哈密顿原理建立了FGM板有限元形式的自由振动方程,利用MATLAB软件编写程序进行了计算．通过数值算例,讨论了不同边界条件下FGM中厚板的无量纲频率随材料梯度指数和厚宽比的变化情况,并与经典板理论下的频率进行了比较．     

Simultaneous Measurement of Plate Natural Frequencies and Vibration Mode Shapes Using ESPI

The natural frequencies and vibration mode shapes of flat plates are simultaneously measured using ESPI. The method involves measuring the surface shape of a vibrating plate at high frame rate using a modified Michelson interferometer and high-speed camera. The vibration is excited here by impact; white (random) noise could alternatively be used. Fourier analysis of the acquired data gives the natural frequencies and associated mode shapes. The analytical procedure used has the advantage that it simultaneously identifies full-field quantitative images of all vibration modes with frequencies up to half the sampling frequency. In comparison, the ESPI time-averaging and the traditional Chladni methods both require that the plate be excited at each natural frequency to allow separate qualitative measurements of the associated mode shapes. The Instrumented Hammer method and Laser Doppler Vibrometry give quantitative measurements but require sequential sampling of individual points on the test surface to provide full-field results. Example ESPI measurements are presented to illustrate the use and capabilities of the proposed plate natural frequency and mode shape measurement method.     

A comprehensive analytical solution for free vibration of rectangular plates with classical edge coditions: Experimental verification

The problem of obtaining free vibration frequencies and mode shapes of rectangular plates resting on combinations of classical (i.e., clamped, simply supported, or free) edge supports is one that has been investigated for more than one hundred years. More recently, the superposition method has been developed for obtaining accurate analytical-type solutions for this family of problems. The object of this paper is to report on the results of numerous experimental tests carefully performed in order to verify the superposition method and associated computer software. Experimental and computed results are compared for a wide range of plate configurations. Very good agreement between theory and experiment has been obtained with regard to both plate natural frequencies and mode shapes. It is concluded that this computational procedure constitutes a powerful new tool for analysis of rectangular plate vibration problems.