The 1 (2)A(1), 1 (2)B(2), and 1 (2)A(2) states of the SO(2) (+) ion studied using multiconfiguration second-order perturbation theory

The 1 (2)A(1), 1 (2)B(2), and 1 (2)A(2) electronic states of the SO(2) (+) ion have been studied using multiconfiguration second-order perturbation theory (CASPT2) and two contracted atomic natural orbital basis sets, S[6s4p3d1f]/O[5s3p2d1f] (ANO-L) and S[4s3p2d]/O[3s2p1d] (ANO-S), and the three states were considered to correspond to the observed X, B, and A states, respectively, in the previous experimental and theoretical studies. Based on the CASPT2/ANO-L adiabatic excitation energy calculations, the X, A, and B states of SO(2) (+) are assigned to 1 (2)A(1), 1 (2)B(2), and 1 (2)A(2), respectively, and our assignments of the A and B states are contrary to the previous assignments (A to (2)A(2) and B to (2)B(2)). The CASPT2/ANO-L energetic calculations also indicate that the 1 (2)A(1), 1 (2)B(2), and 1 (2)A(2) states are, respectively, the ground, first excited, and second excited states at the ground-state (1 (2)A(1)) geometry of the ion and at the geometry of the ground-state SO(2) molecule. Based on the CASPT2/ANO-L results for the geometries, we realize that the experimental geometries (determined by assuming the bond lengths to be the same as the neutral ground state of SO(2)) were not accurate. The CASPT2/ANO-S calculations for the potential energy curves as functions of the OSO angle confirm that the 1 (2)B(2) and 1 (2)A(2) states are the results of the Renner-Teller effect in the degenerate (2)Pi(g) state at the linear geometry, and it is clearly shown that the 1 (2)B(2) curve, as the lower component of the Renner splitting, lies below the 1 (2)A(2) curve. The UB3LYP/cc-pVTZ adiabatic excitation energy calculations support the assignments (A to (2)B(2) and B to (2)A(2)) based on the CASPT2/ANO-L calculations.     

Structure of 1-(arylselanyl)naphthalenes. 2. G dependence in 8-G-1-(p-YC(6)H(4)Se)C(10)H(6).

The structures of 8-G-1-(p-YC(6)H(4)Se)C(10)H(6) (1 (G = Cl) and 2 (G = Br): Y = H (a), OMe (b), Me (c), Cl (d), Br (e), COOEt (f), and NO(2) (g)) were investigated by X-ray crystallographic analysis, NMR spectroscopy, and ab initio MO calculations. The structures of all members in 1 and 2 are concluded to be type B, which is in striking contrast to the type A structure for 4d-g (4 (g(n)), where G = H). The Se-C(i) bond of the p-YC(6)H(4)Se group in 8-G-1-(p-YC(6)H(4)Se)C(10)H(6) is almost perpendicular to the naphthyl plane in type A, and it is located on the plane in type B. The chlorine and bromine substitution at the 8-position in 1 and 2 dramatically changes the type A structure of 4 (g(n)) to type B. The nonbonded G- - -Se-C 3c-4e type interaction must contribute to stabilize the type B structure. The type B structure in 1 and 2 should also be more stabilized than the same structure in 4 by the 3c-4e type interaction: The structure of 4b is type B in the crystals and type B would be more stable for 4c and might be for 4a in solutions. Ab initio MO calculations are performed on 8-G-1-(p-YC(6)H(4)Se)C(10)H(6), 8-G-C(10)H(6)SeH-1, and models HG- - -SeH(2), where G = Cl, Br, and F, to clarify the reason for the dramatic change in the structures. The type B structure is optimized to be more stable than the type A for all species examined, which supports the observations. The energy differences between type B and type A are larger for the models than for the naphthalenes. While the superiority of the type B for the former is Br > Cl > F, that of the latter is Br approximately Cl >/= F. These results show that the main factor of the structural change from type A to type B is the nonbonded G- - -Se-C 3c-4e interaction. The electronic effect of halogens through the naphthalene pi-framework would also contribute to some extent, although the direct comparison of the evaluated values between the naphthalene systems and the models is not so easy. Factors to stabilize the two structures of 1, 2, 4, and 8-(MeSe)-1-(p-YC(6)H(4)Se)C(10)H(6) are reexamined from a viewpoint of the nonbonded G- - -Se-C 3c-4e interaction (G dependence), together with the electronic effect of Y (Y dependence).     

Homoleptic trimethylsilylacetylide complexes of chromium(III), iron(II), and cobalt(III): syntheses, structures, and ligand field parameters

A straightforward method for synthesizing soluble homoleptic trimethylsilylacetylide complexes of first-row transition metal ions is presented. Reaction of anhydrous CrCl2 with an excess of LiCCSiMe3 in THF at -25 degrees C affords orange Li3[Cr(CCSiMe3)6].6THF (1), while analogous reactions employing M(CF3SO3)2 (M = Fe or Co) generate pale yellow Li4[Fe(CCSiMe3)6].4LiCCSiMe3.4Et2O (2) and colorless Li3[Co(CCSiMe3)6].6THF (3). Slightly modified reaction conditions lead to Li8[Cr2O4(CCSiMe3)6].6LiCCSiMe3.4glyme (4), featuring a bis-mu-oxo-bridged binuclear complex, and Li3[Co(CCSiMe3)5(CCH)].LiCF3SO3.8THF (5). The crystal structures of 1-3 show the trimethylsilylacetylide complexes to display an octahedral coordination geometry, with M-C distances of 2.077(3), 1.917(7)-1.935(7), and 1.908(3) angstroms for M = Cr(III), Fe(II), and Co(III), respectively, and nearly linear M-C[triple bond]C angles. The UV-visible absorption spectrum of [Cr(CCSiMe3)6]3- in hexanes exhibits one spin-allowed d-d transition (4T2g <-- 4A1g) and three lower-energy spin-forbidden d-d transitions. The spectra of [Fe(CCSiMe3)6]4- and [Co(CCSiMe3)6]3- in acetonitrile display high-intensity charge-transfer bands, which obscure all d-d transitions except for the lowest-energy spin-allowed band (1T1g <-- 1A1g) of the latter complex. Time-dependent density functional theory (TD-DFT) calculations were employed as an aide in assigning the observed transitions. Taken together, the results are most consistent with the ligand field parameters delta(o) = 20,200 cm(-1) and B = 530 cm(-1) for [Cr(CCSiMe3)6]3-, delta(o) = 32 450 cm(-1) and B = 460 cm(-1) for [Fe(CCSiMe3)6]4- and delta(o) = 32 500 cm(-1) and B = 516 cm(-1) for [Co(CCSiMe3)6]3-. Ground-state DFT calculations support the conclusion that trimethylsilylacetylide acts as a pi-donor ligand.     

Tetradentate bis(o-iminobenzosemiquinonate(1-)) pi radical ligands and their o-aminophenolate(1-) derivatives in complexes of nickel(II), palladium(II), and copper(II)

The coordination chemistries of the potential tetradentate ligands N,N'-bis(3,5-di-tert-butyl-2-hydroxyphenyl)ethylenediamine, H4[L1], the unsaturated analogue glyoxal-bis(2-hydroxy-3,5-di-tert-butylanil), H2[L2], and N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)-2,2-dimethylpropylenediamine, H4[L3], have been investigated with nickel(II), palladium(II), and copper(II). The complexes prepared and characterized are [Ni(II)(H3L1)2] (1), [Ni(II)(HL2)2].5/8CH2Cl2 (2), [Ni(II)(L3**)] (3), [Pd(II)(L3**)][Pd(II)(H2L3) (4), and [Cu(II)(H2O)(L4)] (5), where (L4)2- is the oxidized diimine form of (L3)4- and (L3**)2- is the bis(o-iminosemiquinonate) diradical form of (L3)4-. The structures of compounds 1-5 have been determined by single crystal X-ray crystallography. In complexes 1 and 2, the ligands (H3L1)- and (HL2)- are tridentate and the nickel ions are in an octahedral ligand environment. The oxidation level of the ligands is that of an aromatic o-aminophenol. 1 and 2 are paramagnetic (mu(eff) approximately 3.2 mu(B) at 300 K), indicating an S = 1 ground state. The diamagnetic, square planar, four-coordinate complexes 3 and [Pd(II)(L3**)] in 4 each contain two antiferromagnetically coupled o-iminobenzosemiquinonate(1-) pi radicals. Diamagnetic [Pd(II)(H2L3)] in 4 forms an eclipsed dimer via four N-H.O hydrogen bonding contacts which yields a nonbonding Pd.Pd contact of 3.0846(4) A. Complex 5 contains a five-coordinate Cu(II) ion and two o-aminophenolate(1-) halves in (L4)2-. The electrochemistries of complexes 3 and 4a ([Pd(II)(L3**)] of 4) have been investigated, and the EPR spectra of the monocations and -anions are reported.     

Bioactive constituents from Chinese natural medicines. XXXII. aminopeptidase N and aldose reductase inhibitors from Sinocrassula indica: structures of sinocrassosides B(4), B(5), C(1), and D(1)-D(3)

From the methanolic extract of the whole plant of Sinocrassula indica (Crassulaceae), six new flavonol glycosides, sinocrassosides B(4) (1), B(5) (2), C(1) (3), D(1) (4), D(2) (5), and D(3) (6), were isolated together with 30 compounds. The structures of 1-6 were elucidated on the basis of chemical and physicochemical evidence. In addition, several constituents were found to show inhibitory effects on aminopeptidase N and aldose reductase.     

Further Examples of the P-O-P Connection in Borophosphates: Synthesis and Characterization of Li(2) Cs(2) B(2) P(4) O(15) , LiK(2) BP(2) O(8) , and Li(3) M(2) BP(4) O(14) (M=K, Rb)

A new series of anhydrous mixed alkali-metal borophosphates-Li(2) Cs(2) B(2) P(4) O(15) (1), LiK(2) BP(2) O(8) (2), Li(3) K(2) BP(4) O(14) (3), and Li(3) Rb(2) BP(4) O(14) (4)-have been successfully synthesized by using the conventional solid-state reaction method. Compound 1 contains a novel fundamental building unit (FBU), [B(4) P(8) O(30) ], with B/P=1:2. Compound 2 contains an FBU of [B(2) P(4) O(16) ] with B/P=1:2. Compounds 3 and 4 are isotypic, and they have a [B(P(2) O(7) )(2) ] unit as their FBU. In all four compounds, their FBUs are connected through corner sharing to generate layered anionic partial structures, and then further linked with metallic polyhedra to form three-dimensional (3D) frameworks. Most interestingly, three of the four compounds contain direct P-O-P connections in their structures, which is extremely rare among borophosphates. Thermal analyses, IR spectroscopy, and UV/Vis/near-IR diffuse reflectance spectroscopy have also been performed on the four title compounds.     

Syntheses and structures of the infinite chain compounds Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14)

The alkali metal/group 4 metal/polychalcogenides Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) have been synthesized by means of the reactive flux method at 823 or 873 K. Cs(4)Ti(3)Se(13) crystallizes in a new structure type in space group C(2)(2)-P2(1) with eight formula units in a monoclinic cell at T = 153 K of dimensions a = 10.2524(6) A, b = 32.468(2) A, c = 14.6747(8) A, beta = 100.008(1) degrees. Cs(4)Ti(3)Se(13) is composed of four independent one-dimensional [Ti(3)Se(13)(4-)] chains separated by Cs(+) cations. These chains adopt hexagonal closest packing along the [100] direction. The [Ti(3)Se(13)(4-)] chains are built from the face- and edge-sharing of pentagonal pyramids and pentagonal bipyramids. Formal oxidation states cannot be assigned in Cs(4)Ti(3)Se(13). The compounds Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) crystallize in the K(4)Ti(3)S(14) structure type with four formula units in space group C(2)(h)()(6)-C2/c of the monoclinic system at T = 153 K in cells of dimensions a = 21.085(1) A, b = 8.1169(5) A, c = 13.1992(8) A, beta = 112.835(1) degrees for Rb(4)Ti(3)S(14);a = 21.329(3) A, b = 8.415(1) A, c = 13.678(2) A, beta = 113.801(2) degrees for Cs(4)Ti(3)S(14); a = 21.643(2) A, b = 8.1848(8) A, c = 13.331(1) A, beta = 111.762(2) degrees for Rb(4)Hf(3)S(14); a = 22.605(7) A, b = 8.552(3) A, c = 13.880(4) A, beta = 110.919(9) degrees for Rb(4)Zr(3)Se(14); a = 22.826(5) A, b = 8.841(2) A, c = 14.278(3) A, beta = 111.456(4) degrees for Cs(4)Zr(3)Se(14); and a = 22.758(5) A, b = 8.844(2) A, c = 14.276(3) A, beta = 111.88(3) degrees for Cs(4)Hf(3)Se(14). These A(4)M(3)Q(14) compounds (A = alkali metal; M = group 4 metal; Q = chalcogen) contain hexagonally closest-packed [M(3)Q(14)(4-)] chains that run in the [101] direction and are separated by A(+) cations. Each [M(3)Q(14)(4-)] chain is built from a [M(3)Q(14)] unit that consists of two MQ(7) pentagonal bipyramids or one distorted MQ(8) bicapped octahedron bonded together by edge- or face-sharing. Each [M(3)Q(14)] unit contains six Q(2)(2-) dimers, with Q-Q distances in the normal single-bond range 2.0616(9)-2.095(2) A for S-S and 2.367(1)-2.391(2) A for Se-Se. The A(4)M(3)Q(14) compounds can be formulated as (A(+))(4)(M(4+))(3)(Q(2)(2-))(6)(Q(2-))(2).     

Revised structures of gambiriins A1, A2, B1, and B2, chalcane-flavan dimers from gambir (Uncaria gambir extract)

Gambir, the aqueous extract from Uncaria gambir (Rubiaceae), has been used as an astringent medicine in Asian countries. Investigation of the constituents in the extract led to the isolation of four chalcane-flavan dimers, gambiriin A1 (6), A2 (7), B1 (8), and B2 (9), in addition to (+)-catechin (1), (+)-epicatechin (2), and dimeric proanthocyanidins, procyanidin B1 (3), procyanidin B3 (4), and gambiriin C (5). The spectroscopic and chemical data obtained in the present study indicated that their previously proposed structures 6a, 7a, 8a, and 9a should be revised to 6, 7, 8, and 9, respectively.     

Synthesis, structure, and catalytic properties of V(IV), Mn(III), Mo(VI), and U(VI) complexes containing bidentate (N, O) oxazine and oxazoline ligands

Synthesis of seven complexes containing oxazoline ([(L(1))(2)V=O] (4), [(L(1))(2)MoO(2)] (5), [(L(1))(2)UO(2)] (6); HL(1) (1) [HL(1) = 2-(4',4'-dimethyl-3'-4'-dihydroxazol-2'-yl)phenol]), chiral oxazoline ([(L(2))(2)UO(2)] (7); HL(2) (2) [HL(2) = (4'R)-2-(4'-ethyl-3'4'-dihyroxazol-2'-yl)phenol]), and oxazine ([(L(3))(2)V=O] (8), [(L(3))(2)Mn(CH(3)COO(-))] (9), [(L(3))(2)Co] (10); HL(3) (3) [HL(3) = 2-(5,6-dihydro-4H-1,3-oxazolinyl)phenol]) and their characterization by various techniques such as UV-vis, IR, and EPR spectroscopy, mass spectrometry, cyclic voltammetry, and elemental analysis are reported. The novel oxazine (3) and complexes 4, 5, 8 and 9 were also characterized by X-ray crystallography. Oxazine 3 crystallizes in the monoclinic system with the P2(1)/n space group, complexes 4 and 9 crystallize in the monoclinic system with the P2(1)/c space group, and complexes 5 and 8 crystallize in the orthorhombic system with the C222(1) space group and the P2(1)2(1)2(1) chiral space group, respectively. The representative synthetic procedure involves the reaction of metal acetate or acetylacetonate derivatives with corresponding ligand in ethanol. Addition of Mn(OAc)(2).4H(2)O to an ethanol solution of 3 gave the unexpected complex Mn(L(3))(2).(CH(3)COO(-)) (9) where the acetate group is coordinated with the metal center in a bidentate fashion. The catalytic activity of complexes 4-9 for oxidation of styrene with tert-butyl hydroperoxide was tested. In all cases, benzaldehyde formed exclusively as the oxidation product.     

Tetraarylpentaborates, [B(5)O(6)Ar(4)](-) (Ar = C(6)H(4)OMe-4, C(6)H(3)Me(2)-2,6): their formation from the reaction of arylboronic acids with an aryloxorhodium complex,structure, and chemical properties

The reactions of (4-methoxyphenyl)boronic acid (1a) and of (2,6-dimethylphenyl)boronic acid (1b) with (PMe(3))(3)Rh-(OC(6)H(4)Me-4) (2) in a 5:1 molar ratio result in the formation of cationic rhodium complexes with new tetraarylpentaborates [Rh(PMe(3))(4)](+)[B(5)O(6)Ar(4)](-) (3a, Ar = C(6)H(4)OMe-4; 3b, Ar = C(6)H(3)Me(2)-2,6). The characterization of 3a is as follows: orthorhombic space group P2(1)2(1)2(1), a = 14.7600(5) A, b = 17.1675(5) A, c = 19.8654(5) A; V = 5033.7(3) A(3); Z = 4. The characterization of 3b is as follows: orthorhombic space group Pnma, a = 23.704(6) A, b = 17.254(8) A, c = 13.304(2) A; V = 5441(2) A(3); Z = 4. An intermediate complex, [Rh(PMe(3))(4)](+)[Ph(3)B(3)O(3)(OC(6)H(4)Me-4)](-) (4), was isolated from the reaction of phenylboroxine, (PhBO)(3), with 2. The tetraarylpentaborates smoothly undergo hydrolysis to give [Rh(PMe(3))(4)](+)[B(5)O(6)(OH)(4)](-) (5).     

Crystal Structure of 1, 1-Dichloro-la, 3-diphenyl-1, la, 2, 3-tetrahydro-azirino [2, 1-d ] [1, 5]benzothiazepine (C_(22),H_(17)Cl_2NS )

1INTR0DUCTI0NBenzoheteroazepinecompoundsareimportantpharmaceuticalagents"-".Inre-centyears,ithasbeenfoundthatbenzoheter0azepinetricyclicderivatives,especiallythosefusedwithotherfiveorsix-memberedheterocycle,area1soofpotentialphar-maceuticalinterestst4-6j.Hence,muchattentionhasbeenpaidtothesynthesesofthem,suchasl,3-oxazino[3,2-djt1,5jbenzothia/diazepin-l-onet"'J,1,2,4-tria-zolo[4,3-dj[1,5jbenzothia/diazepine"',1,2,4-oxadiazolo[4,5-dj[l,5jbenzothia/diazepine',',andsoon.Meanwhiletheirstructur…     

Coordination-position isomeric M(II)Cu(II) and Cu(II)M(II) (M = Co, Ni, Zn) complexes derived from macrocyclic compartmental ligands

The dinucleating macrocyclic ligands (L(2;2))(2-) and (L(2;3))(2-), comprised of two 2-[(N-methylamino)methyl]-6-(iminomethyl)-4-bromophenolate entities combined by the -(CH(2))(2)- chain between the two aminic nitrogen atoms and by the -(CH(2))(2)- or -(CH(2))(3)- chain between the two iminic nitrogen atoms, have afforded the following M(II)Cu(II) complexes: [CoCu(L(2;2))](ClO(4))(2).MeCN (1A), [NiCu(L(2;2))](ClO(4))(2) (2A), [ZnCu(L(2;2))](ClO(4))(2).0.5MeCN.EtOH (3A), [CoCu(L(2;3))(MeCN)(2-PrOH)](ClO(4))(2) (4A), [NiCu(L(2;3))](ClO(4))(2) (5A), and [ZnCu(L(2;3))](ClO(4))(2).1.5DMF (6A). [CoCu(L(2;2))(MeCN)(3)](ClO(4))(2) (1A') crystallizes in the monoclinic space group P2(1)/n, a = 11.691(2) A, b = 18.572(3) A, c = 17.058(3) A, beta= 91.18(2) degrees, V = 3703(1) A(3), and Z = 4. [NiCu(L(2;2))(DMF)(2)](ClO(4))(2) (2A') crystallizes in the triclinic space group P(-)1, a = 11.260(2) A, b = 16.359(6) A, c = 10.853(4) A, alpha= 96.98(3) degrees, beta= 91.18(2) degrees, gamma= 75.20(2) degrees, V = 1917(1) A(3), and Z = 2. 4A crystallizes in the monoclinic space group P2(1)/c, a = 15.064(8) A, b = 11.434(5) A, c = 21.352(5) A, beta= 95.83(2)degrees, V = 3659(2) A(3), and Z = 4. The X-ray crystallographic results demonstrate the M(II) to reside in the N(amine)(2)O(2) site and the Cu(II) in the N(imine)(2)O(2) site. The complexes 1-6 are regarded to be isomeric with [CuCo(L(2;2)))](ClO(4))(2).DMF (1B), [CuNi(L(2;2)))](ClO(4))(2).DMF.MeOH (2B), [CuZn(L(2;2)))](ClO(4))(2).H(2)O (3B)), [CuCo(L(2;3)))](ClO(4))(2).2H(2)O (4B), [CuNi(L(2;3)))](ClO(4))(2) (5B), and [CuZn(L(2;3)))](ClO(4))(2).H(2)O (6B) reported previously, when we ignore exogenous donating and solvating molecules. The isomeric M(II)Cu(II) and Cu(II)M(II) complexes are differentiated by X-ray structural, magnetic, visible spectroscopic, and electrochemical studies. The two isomeric forms are significantly stabilized by the "macrocyclic effect" of the ligands, but 1A is converted into 1B on an electrode, and 2A is converted into 2B at elevated temperature.     

Syntheses, crystal structures, and magnetic properties of one-dimensional oxalato-bridged Co(II), Ni(II), and Cu(II) complexes with n-aminopyridine (n = 2-4) as terminal ligand

The reaction of M(ox) x 2H(2)O (M = Co(II), Ni(II)) or K(2)(Cu(ox)(2)) x 2H(2)O (ox = oxalate dianion) with n-ampy (n = 2, 3, 4; n-ampy = n-aminopyridine) and potassium oxalate monohydrate yields one-dimensional oxalato-bridged metal(II) complexes which have been characterized by FT-IR spectroscopy, variable-temperature magnetic measurements, and X-ray diffraction methods. The complexes M(mu-ox)(2-ampy)(2) (M = Co (1), Ni (2), Cu (3)) are isomorphous and crystallize in the monoclinic space group C2/c (No. 15), Z = 4, with unit cell parameters for 1 of a = 13.885(2) A, b = 11.010(2) A, c = 8.755(1) A, and beta = 94.21(2) degrees. The compounds M(mu-ox)(3-ampy)(2).1.5H(2)O (M = Co (4), Ni (5), Cu (6)) are also isomorphous and crystallize in the orthorhombic space group Pcnn (No. 52), Z = 8, with unit cell parameters for 6 of a = 12.387(1), b = 12.935(3), and c = 18.632(2) A. Compound Co(mu-ox)(4-ampy)(2) (7) crystallizes in the space group C2/c (No. 15), Z = 4, with unit cell parameters of a = 16.478(3) A, b = 5.484(1) A, c = 16.592(2) A, and beta = 117.76(1) degrees. Complexes M(mu-ox)(4-ampy)(2) (M = Ni (8), Cu (9)) crystallize in the orthorhombic space group Fddd (No. 70), Z = 8, with unit cell parameters for 8 of a = 5.342(1), b = 17.078(3), and c = 29.469(4) A. All compounds are comprised of one-dimensional chains in which M(n-ampy)(2)(2+) units are sequentially bridged by bis-bidentate oxalato ligands with M.M intrachain distances in the range of 5.34-5.66 A. In all cases, the metal atoms are six-coordinated to four oxygen atoms, belonging to two bridging oxalato ligands, and the endo-cyclic nitrogen atoms, from two n-ampy ligands, building distorted octahedral surroundings. The aromatic bases are bound to the metal atom in cis (1-6) or trans (7-9) positions. Magnetic susceptibility measurements in the temperature range of 2-300 K show the occurrence of antiferromagnetic intrachain interactions except for the compound 3 in which a weak ferromagnetic coupling is observed. Compound 7 shows spontaneous magnetization below 8 K, which corresponds to the presence of spin canted antiferromagnetism.     

Synthesis and structures of selected benzamidinates of Li, Na, Al, Zr and Sn(II) using the C1-symmetric ligands [N(SiMe3)C(C6H4Me-4 or Ph)NPh]-

Several compounds based on the C(1)-symmetric ligands [N(R)C(Ar)NPh]- [abbreviated as B1 (Ar = C(6)H(4)Me-4) or B2 (Ar = Ph), R = SiMe(3)] are reported. They are the crystalline metal benzamidinates [Li(mu:kappa2-B1)(OEt2)](2) (1), [Al(kappa2-B1)2Me] (2), [Al(kappa2-B1)2X] [X = Cl/Me, 1 : 1 (3)], [Sn(kappa2-B1)2] (4), Zr(kappa2-B1)2Cl2 (5), [Zr(kappa2-B1)3Cl] (6), [Na(mu:kappa2-B1)(tmeda)]2 (7), K[B1] (8), Li(B2)(OEt2) (9) and Zr(kappa2-B1)3Cl (10) and the known benzamidine Z-H2NC(C6H4Me-4) = NPh (11). They were prepared by (i) insertion of the nitrile 4-MeC6H4CN (1, 7, 8, 11) or PhCN (9) into the appropriate M-N(R')Ph [R' = R and M = Li (1, 9), Na (7), K (8)] bond and subsequent hydrolysis for 11 [R' = H and M = Li], or (ii) a ligand transfer reaction using the lithium amidinate 1 and Al(Me)2Cl (2, 3), SnCl2 (4) or ZrCl4 (5, 6), or Li(B2) and ZrCl4 (10). The X-ray structures of 1, 2, 3, 4, 6b (i.e..3PhMe) 7, and 11 are presented. Exploratory polymerisation experiments are described, using 2, 5 or 6 as a procatalyst with methylaluminoxane (MAO) (Al : Zr ca. 500 : 1) as promoter. Thus toluene solutions were exposed to C2H4 under ambient conditions; while 2 was unresponsive, 5 and 6 showed modest activity in the formation of polyethylene.     

Niobium-arsenic Zintl phases: A(6)NbAs(5) (A = K,Rb, Cs), K(6)NbTlAs(4), and K(8)NbPbAs(5) with edge-bridged niobium-centered tetrahedra of arsenic, [NbAs(4)M](n-) where M = As,Tl, Pb

The five title compounds were prepared by direct reactions of the corresponding elements at high temperature. Their structures contain isolated anions of tetrahedral NbAs(4) where one of the edges of the tetrahedron is bridged by a third atom. The bridging atom is arsenic in A(6)NbAs(5) (monoclinic, P2(1)/c, Z = 8; with a = 25.774(3) A, b = 9.335(1) A, c = 13.012(1) A, beta = 101.05(1) degrees for A = K; a = 27.629(1) A, b = 9.925(1) A, c = 14.111(1) A, beta = 101.63(1) degrees for A = Rb; and a = 27.405(1) A, b = 9.9447(6) A, c = 13.9964(8) A, beta = 101.210(1) degrees for A = Cs), thallium in K(6)NbTlAs(4) (orthorhombic, Pnma, Z = 4, a = 18.786(1) A, b = 10.4442(4) A, c = 7.715(1) A), and lead in K(8)NbPbAs(5) (monoclinic, C2/c, Z = 8, a = 31.597(9) A, b = 9.353(1) A, c = 13.427(2) A, beta = 95.25(1) degrees ). The lead atom in the latter is bonded to a third arsenic atom as well. Magnetic measurements showed diamagnetic behavior, and therefore, the compounds are electronically balanced, closed-shell type compounds and can be described as transition-metal Zintl phases. The bonding in the anion NbAs(5)(6-) is discussed in detail.     

Hydrothermal syntheses, crystal structures, and magnetic properties of inorganic-organic hybrid vanadium selenites with zero- to three-dimensional structures: (1,10-phenanthroline)(2)V(2)SeO(7), (2,2'-bipyridine)VSeO(4), (4,4'-bipyridine)V(2)Se(2)O(8), and (4,4'-bipyridine)(2)V(4)Se(3)O(15).H(2)O

A family of inorganic-organic hybrid vanadium selenites with zero-, one-, two-, and three-dimensional structures, (1,10-phen)(2)V(2)SeO(7), (2,2'-bipy)VSeO(4), (4,4'-bipy)V(2)Se(2)O(8), and (4,4'-bipy)(2)V(4)Se(3)O(15).H(2)O (where phen = phenanthroline and bipy = bipyridine), were hydrothermally synthesized and characterized by single-crystal X-ray diffraction. Different bidentate organodiamine ligands and reactant concentrations were used in the four reaction systems, which are responsible for the variety of structural dimensions of the compounds. (1,10-phen)(2)V(2)SeO(7) crystallizes in a monoclinic system with space group P2(1)/n and cell parameters a = 8.6509(3) A,( )b = 7.8379(2) A, c = 34.0998(13) A, beta = 91.503(2) degrees, and Z = 4. (2,2'-bipy)VSeO(4) crystallizes in a monoclinic system with space group C2/c and cell parameters a = 17.0895(12) A, b = 14.7707(10) A, c = 11.7657(8) A, beta = 131.354(3) degrees, and Z = 8. (4,4'-bipy)V(2)Se(2)O(8) crystallizes in a triclinic system with space group Ponemacr; and cell parameters a = 7.1810(10) A, b = 10.8937(13) A, c = 11.1811(15) A, alpha = 115.455(3) degrees, beta = 107.582(3) degrees, gamma = 91.957(4) degrees, and Z = 2. (4,4'-bipy)(2)V(4)Se(3)O(15).H(2)O crystallizes in a monoclinic system with space group Pc and cell parameters a = 7.9889(9) A, b = 7.8448 A, c = 23.048(3) A, beta = 99.389(4) degrees, and Z = 2. (1,10-phen)(2)V(2)SeO(7) has an isolated structure, (2,2'-bipy)VSeO(4) has a chain structure, (4,4'-bipy)V(2)Se(2)O(8) has a layered structure, and (4,4'-bipy)(2)V(4)Se(3)O(15).H(2)O has a framework structure. The chains are constructed from VO(4)N(2) octahedra and SeO(3) pyramids, laced by organic ligands (2,2'-bipy). The layers consist of vanadium selenite chains [(VO)(2)(SeO(3))(2)]( infinity ), linked by 4,4'-bipy molecules. The framework is composed of vanadium selenite sheets [V(4)Se(3)O(16)]( infinity ), pillared by 4,4'-bipy molecules. All of the compounds are thermally stable to 300 degrees C, and the magnetic susceptibilities confirm the existence of tetravalent V atoms in the antiferromagnetic (4,4'-bipy)V(2)Se(2)O(8) complex and mixed tetravalent and pentavalent V atoms in the paramagnetic complex (4,4'-bipy)(2)V(4)Se(3)O(15).H(2)O.     

Synthesis, structure, reactivity, and thermal isomerization of boron-substituted 13-vertex cobaltacarboranes (eta5-Cp)Co(eta6-R2C2B10Me8H2) (R = H, Et)

Reduction of boron-substituted carboranes o-R2C2B10Me8H2 (R = H, Et), thermal isomerization, and nucleophilic reaction of the resultant 13-vertex cobaltacarboranes were studied. Reaction of o-C2B10Me8H4 (1) with excess potassium metal in tetrahydrofuran (THF) gave, after recrystallization from a THF solution of 18-crown-6 ether, [[K(18-crown-6)(THF)2][K(18-crown-6)]][[4-(18-crown-6)-2,3,5,8,9,11,12,13-Me8-4,1,6-KC2B10H4]2] (2) in 78% yield. Interaction of 1 with excess sodium or potassium metal in THF, followed by treatment with CoCl2/CpNa and then aerobatic oxidation, afforded two boron-substituted 13-vertex cobaltacarboranes, 4-Cp-2,3,5,8,9,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (3) and 4-Cp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (4), in 15% and 8% yield, respectively. Subsequently, thermal isomerization of 3 and 4 yielded another two new isomers, 4-Cp-2,3,5,6,8,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (5) and 4-Cp-2,3,5,6,7,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (6). Treatment of 3 or 4 with strong bases such as nBuLi and MeLi generated unexpected nucleophilic substitution products 4-nBuCp-2,3,5,8,9,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (7), 4-nBuCp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (8a), and 4-MeCp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (8b) in good yields. Under the same reaction conditions, however, only one 13-vertex cobaltacarborane, 4-Cp-1,9-Et2-2,5,6,7,8,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (10), was isolated when o-Et2C2B10Me8H2 (9) was used as the starting material. Complex 10 is a thermodynamically stable product and has a substitution pattern different from that of 3-6. These results show that the substituents on either the cage carbon or boron atoms have an important effect on the formation and thermal stability of the 13-vertex metallacarboranes. The formation of these complexes can be rationalized by the diamond-square-diamond mechanism.     

Syntheses and characterization of mu,eta(1),eta(1)-3,5-di-tert-butylpyrazolato derivatives of aluminum

The 3,5-di-tert-butylpyrazolato (3,5-tBu(2)pz) derivatives of aluminum [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(1)R(2)](2) (R(1) = R(2) = Me 1; R(1) = R(2) = Et, 2; R(1) = R(2) = Cl, 3; R(1) = R(2) = I, 4; [(eta(2)-3,5-tBu(2)pz)(3)Al], 5; [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)(C triple bond CPh)(2)] (E = S (6), Se (7), Te (8)) have been prepared in good yield. Compounds 1 and 2 were obtained by the reactions of H[3,5-tBu(2)pz] with Me(3)Al and Et(3)Al, respectively. Reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)H(2)](2) with the pyrazole H[3,5-tBu(2)pz] gave [(eta(2)-3,5-tBu(2)pz)(3)Al] (5). The reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(2)](2) (R = H, Me) and I(2) yielded 4, while the reaction of 1 equiv of K[3,5-tBu(2)pz] and AlCl(3) afforded 3. In addition, the reaction of [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)H(2)] and HC triple bond CPh gave 6, 7, and 8. All compounds have been characterized by elemental analysis, NMR, and mass spectroscopy. The molecular structure analyses of compounds 1, 3, 6, and 7 by X-ray crystallography showed that complexes 1 and 3 are dimeric with two eta(1),eta(1)-pyrazolato groups in twisted conformation while 6 and 7 with two eta(1),eta(1)-pyrazolato groups display a boat conformation.     

STRUCTURE OF MOLECULAR COMPOUND CRYSTAL A_2B(A =1, 6, 7, 8,-TETRA-PHENYL (3, 4-BENZO)BICYCLO[4, 2, 0]OCTA-7-ENE, B=CIS, CIS-1,2,3,4,-TETRAPHENYLBUTADIENE)

<正> C100H78, (A: C36H28, B: C28H22) Mr = 1279. 74, monoclinic, P21/a, a=17. 282(3), b=10. 669(4), c= 19, 927(3) A , β =102. 99(1)°,V = 3580. 1(2) A3, Z=2, μ(MoKα) = 0. 623cm-1, F(000) = 1356, Dc=1. 187g/cm3, room temperature. The final R=0. 084, Rw = 0. 086 for 1255 independent observed reflections (I≥3σ(I)). Owing to the existence of 1,6,7, 8-Tetraphenyl (3,4-benzo)-bicyclo[4, 2, 0]octa-7-ene(A) , cis, cts-1, 2, 3, 4-Tetraphenylbutadiene (B) in A2B can take the different conformation from the one in the pure B crystal. The reason of the formation of this molecular compound crystal is put forward.     

The hexacoordinate silicate dianions mer-tris[glycolato(2-)-O(1),O(2)]silicate and fac-tris[benzilato(2-)-O(1),O(2)]silicate: syntheses and structural characterization

Treatment of tetramethoxysilane with glycolic acid and morpholine (molar ratio 1:3:2) in methanol, followed by crystallization from methanol/tetrahydrofuran, yielded morpholinium mer-tris[glycolato(2-)-O(1),O(2)]silicate (mer-7). Treatment of benzilic acid with sodium hydride, followed by addition of tetrachlorosilane and triethylamine (molar ratio 3:4:1:2), afforded, after crystallization from 1,4-dioxane/acetonitrile/diethyl ether/n-pentane, triethylammonium fac-tris[benzilato(2-)-O(1),O(2)]silicate-hemi-1,4-dioxane (fac-8.(1)/(2)C(4)H(8)O(2)). Single-crystal X-ray diffraction studies showed that the Si-coordination polyhedra of the hexacoordinate silicon(IV) complexes mer-7 and fac-8.(1)/(2)C(4)H(8)O(2) are distorted octahedra. Both compounds were additionally characterized by solid-state VACP/MAS NMR studies ((13)C, (29)Si), and fac-8.(1)/(2)C(4)H(8)O(2) was studied in solution by (1)H, (13)C, and (29)Si NMR experiments. The structural investigations were complemented by computational studies (MP2 studies, TZP level) of the dianions of fac-7 and mer-7.