2-Alkyl-3-chloro(bromo)tetrahydrofurans

The reaction ofRS(SR)-2,3-dibromo- and 2,3-dichlorotetrahydrofurans with ethylmagnesium bromide in ether was investigated. It was shown that the main reaction products are 2-ethyl-3-bromotetrahydrofuran (27%) and 3-bromo-2-(2-ethyl-3-tetrahydrofuryl)tetrahydrofuran (65%) in the first case and 2-ethyl-3-chlorotetrahydrofuran (33%) and 3-chloro-2-(3-chloro-2-tetrahydrofuryl)tetrahydrofuran (65%) in the second.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. I. M. Gubkin Moscow Institute of Petroleum and Gas, 111917 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 6, pp. 1430–1434, June, 1992.     

Zur Kenntnis der Struktur von Sr3(BN2)2

On the Structure of Sr₃(BN₂)₂ The structure of Sr₃(BN₂)₂ was determined on single-crystal X-ray data collected with a four-circle diffractometer. Sr₃(BN₂)₂ crystallizes in the cubic space group Im3 m (no. 229) with a = 764.56(3) pm and Z = 3. The structure contains linear BN^3?₂ ions with a B? N bond length of 135.8(6) pm. The straight forward synthesis employing metal nitrides plus boron nitride yielded crystalline powders of M₃(BN₂)₂ (M = Ca, Sr) at 1100°C (5 days). Cubic indexing of guinier patterns gave a = 765.8(1) pm for M = Sr and a = 734.7(2) pm for M = Ca. The structure refinement on a single crystal of Sr₃(BN₂)₂ revealed that one strontium site (2a; 0, 0, 0) is occupied by only about 50%. It has been tried to fully occupy this site with an alkali metal (A) to obtain ASr₄(BN₂)₃ (Z = 2). Reactions with A = Na yielded crystalline powders. Cubic indexing of the guinier pattern analogous to that of Sr₃(BN₂)₂ gave a = 754.2(1) pm.     

An ab initio and density functional theory study on the mechanism for the reaction of OH with 2-ethylfuran

The mechanism of the reaction of OH + 2-ethylfuran has been investigated using the G3MP2 and G3MP2B3 levels of theory. The geometric parameters of all species involved in the reaction have been optimized at the MP2 and B3LYP levels of theory with 6-311G(d,p) basis set. The overall profile of doublet potential energy surface (PES) for the OH + 2-ethylfuran reaction has been constructed using the G3MP2 and G3MP2B3 methods. The results show that the addition-elimination mechanism dominates the OH + 2-ethylfuran reaction and the major products are CH₃CH₂C(OH)CHCHCHOH (P8) and CH₃CH₂COCHCHCHOH (P6).     

Reactions ofO-methyl tetramethyldiamidophosphite with halo- and thiocyanoalcohols

The reaction of O-methyl tetramethyldiamidophosphite with 3-bromopropanol or 3-bromo-2-butanol occurs with the liberation of dimethylamine and results in mixed phosphites. The reaction of O-methyl tetramethyldiamidophosphite with 3-thiocyano-2-butanol proceeds with the participation of the sulfur atom of the thiocyano group and formation ofS-(3-hydroxybutyl) tetramethyldiamidothiophosphate.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 167–169, January, 1994.     

Highly selective hydrohalogenation reaction of substituted 2,3-allenoates

The hydrohalogenation reaction of 1-alkyl substituted 1,2-allenyl carboxylic acid esters (1) with MX (M= Na, or Li, X= Cl, Br, I) afforded a mixture of (5,7-unsaturated 3-halo-3-alkenoates (2) and α,β-unsaturated 3-halo-2-alkenoates (3) in HOAc, while using a mkture of HOAc-CF3CO2H (1:1) or CF3CO2H as the reaction medium the corresponding reaction cleanly produced β,γ-unsaturated 3-halo-3-alkenoates (2) as the sole products in high yields. The subsequent coupling reactions were studied.     

Mechanism for the gas‐phase reaction between OH and 3‐methylfuran: A theoretical study

The mechanism for the OH + 3‐methylfuran reaction has been studied via ab initio calculations to investigate various reaction pathways on the doublet potential energy surface. Optimizations of the reactants, products, intermediates, and transition structures are conducted using the MP2 level of theory with the 6‐311G(d,p) basis set. The single‐point electronic energy of each optimized geometry is refined with G3MP2 and G3MP2B3 calculations. The theoretical study suggests that the OH + 3‐methylfuran reaction is dominated by the formation of HC(O)CH?C(CH₃)CHOH (P7) and CH(OH)CH?C(CH₃)C(O)H (P9), formed from two low‐lying adducts, IM1 and IM2. The direct hydrogen abstraction pathways and the S_N2 reaction may play a minor or negligible role in the overall reaction of OH with 3‐methylfuran. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Chrysanthemyl 2-acetoxy-3-methylbutanoate: the sex pheromone of the citrophilous mealybug, Pseudococcus calceolariae

Headspace volatiles collected from virgin females of the citrophilous mealybug, Pseudococcus calceolariae, contain three compounds not present in the headspace of control samples. The main female-specific compound is identified as [2,2-dimethyl-3-(2-methylprop-1-enyl)cyclopropyl]methyl 2-acetoxy-3-methylbutanoate (chrysanthemyl 2-acetoxy-3-methylbutanoate). The other two compounds are identified as [2,2-dimethyl-3-(2-methylprop-1-enyl)cyclopropyl]methanol (chrysanthemol) and [2,2-dimethyl-3-(2-methylprop-1-enyl)cyclopropyl]methyl 2-hydroxy-3-methylbutanoate (chrysanthemyl 2-hydroxy-3-methylbutanoate). Traps baited with 100 μg and 1000 μg of chrysanthemyl 2-acetoxy-3-methylbutanoate captured 4- and 20-fold more males than traps baited with virgin females.     

3-Trifluoromethyl- and 3-difluoromethyl-thalidomides

Syntheses of racemic 3-trifluoromethyl- and 3-difluoromethyl-thalidomide starting from 2-(tert-butyloxycarbonylimino)-3,3,3-trifluoropropionate or -3,3-difluoropropionate as fluorine-containing building blocks are described.     

Reactions of (Me2N)3P with functionalized di- and trichlorocyclopentenones

2,3-Dichloro-4,4-ethylenedioxycyclopent-2-enone, its 5-chloroderivative, and 5-allyl-2,3,5-trichloro-4,4-dimethoxycyclopent-2-enone react with (Me₂N)₃P to give the corresponding products of substitution of the NMe₂ group for the vinylic Cl atom at C(3). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2555–2556, December, 1998.     

A new general approach to 4-substituted-3-halo-2-quinolones

A general procedure for the preparation of 4-substituted-3-halo-2-quinolones (halo = F, Cl, Br) utilizing 2-halo diethylphosphonoacetic acids (halo = F, Cl, Br) and o-aminophenylketones as the starting materials is described. The title compounds are obtained by an intramolecular Horner-Wadsworth-Emmons olefination of halogen-containing N-acyl-o-aminophenylketones. The transformation process is generally applicable under mild conditions.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Fe2O3-TiO2磁性复合材料的制备及可见光催化性能

以FeCl₃和Ti(C₄H₉O)₄为前驱体, 通过复合溶胶法制备了Fe₂O₃-TiO₂磁性复合光催化剂, 并用 XPS, XRD, SEM, EDS及BET进行了表征. 对亚甲基蓝的降解实验证明, Fe₂O₃的引入将复合材料的光响应范围扩展至可见光区, 且掺杂的Fe₂O₃摩尔分数为1.0%时, 样品可见光催化性能最高. 磁强计的测试结果显示, 复合光催化剂具有一定的磁性, 可在反应结束后利用磁场从体系分离, 使催化剂得到回收再利用.     

Studies on Hydroiodination and Deconjugation of 5—Aryloxy—（thiophenyl）—3—pentyn—2—one

One-pot hydroiodination and deconjugation of 5-aryloxy(or thiophenyl)-3-pentyn-2-one with a reagent system of sodium iodide/trimethylsilyl chloride/water in acetonitrile at 25℃ have been described.The plasuible mechanism was discussed.The reaction provided a simple and useful method for the preparation of (Z)-β-substituted β，γ-enones and (Z)-β-substituted α，β-unsaturated ketones.     

A Metal‐free Approach to 3‐Aryl‐3‐hydroxy‐2‐oxindoles by Treatment of 3‐Acyloxy‐2‐oxindoles with Diaryliodonium Salts

A mild, metal‐free approach has been realized for the facile construction of highly valuable 3‐(hetero)aryl‐3‐hydroxy‐2‐oxindoles. Direct arylations of 3‐acyloxy‐2‐oxindoles with diaryliodonium salts as arylation reagents are implemented in the presence of K₂CO₃ at room temperature without using an organometallic promoter to deliver an array of 3‐(hetero)aryl‐3‐hydroxy‐2‐oxindoles in good yields.     

Interpretation of the difference of optimal Mo density in MoS<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and MoS<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> HDS catalysts

The first part of this paper deals with the morphology of the MoS₂ phase and its oxide precursor, the MoO₃ phase, mainly from a geometrical point of view. After giving a brief review of the literature describing the structure of these compounds, Mo densities in both phases were calculated along various crystallographic planes. Further, using structural models recently proposed by others, Mo densities in MoS₂ were also calculated in the case of an epitactic growth on γ-Al₂O₃ and TiO₂ model surfaces. Then, the calculated Mo densities were compared with experimental results (Mo density when HDS activity is maximal) previously obtained for catalysts constituted of MoS₂ supported on a low SSA TiO₂, a high SSA TiO₂ and a conventional γ-alumina. It was suggested that either on alumina or titania the MoS₂ phase is growing as (100) MoS₂ planes. However, while on the alumina the optimal MoS₂ phase might be constituted of dispersed MoS₂ slabs covering only a part of the alumina surface (2.9–3.9 Mo atoms/nm²), on titania the optimal MoS₂ phase might be constituted of a uniform MoS₂ monolayer (5.2 atoms/nm² for the high SSA titania, which is equal to the Mo density of a perfect MoS₂ (100) plane). This difference may originate in the creation of a 'TiMoS' phase enhancing the S atoms mobility over Mo/TiO₂-sulfided catalysts. Indeed, while in the case of a γ-alumina carrier the active sites (labile S atoms) are located on the edge of MoS₂ slabs making the ratio Mo_edge/Mo_total a crucial parameter for the catalytic performances, in the case of a titania carrier the labile sulfur atoms might be statistically distributed all over the TiMoS active phase. Further, the higher Mo density observed over the high SSA titania (5.2 atoms/nm²) when compared to that over the low SSA titania (4.2 atoms/nm²) was supposedly due to the pH-swing method advantageously used to prepare the former carrier. Indeed, this method allows giving a solid with enhanced mechanical properties providing a good stability to the derived catalysts under experimental conditions. In addition, this TiO₂ carrier exhibits a great homogeneity, with a surface structure substantially uniform, which might be adequate for a long-range growth of (100) MoS₂ slabs.     

C–Gd2S3 und C–Tb2S3: Darstellung und Röntgenstrukturanalyse von Einkristallen

C–Gd₂S₃ and C–Tb₂S₃: Synthesis and X-Ray Structure Analysis of Single Crystals Pale yellow, bead-shaped single crystals of C-type Gd₂S₃ (a = 838.47(9) pm) and Tb₂S₃ (a = 835.23(9) pm) are obtained upon the oxidation of the respective rare-earth metal (M = Gd and Tb) with sulfur (molar ratio 2 : 3) in evacuated silica tubing at 700 °C in the presence of fluxing CsCl within five days. Their crystal structure belongs to a cation-deficient Th₃P₄-type variant (cubic, I43d) according to M_2.667□_0.333S₄ (Z = 4) or M₂S₃ (Z = 5.333) offering coordination numbers of eight (S^2– arranged as trigonal dodecahedra) to the cations. In spite of the high Cs⁺ activity in molten CsCl, no cesium incorporation into the M_5.333□_0.667S₈-frame structure (e. g. as CsM₅S₈ with Z = 2) can be achieved, judged from refined occupation factors of M³⁺ very close to x = 8/9 for M_3xS₄.     

Reactivity of 3-formyl- and 3-cyanothiochromones toward some N- and C-nucleophiles. Novel synthesis of 3-substituted 2-aminothiochromones

The reactions of 3-formylthiochromone with o-phenylenediamines, o-aminobenzenethiol, and indoles proceeded at the aldehyde group to give 3-(benzimidazol-2-yl)thiochromone, 3-(benzothiazol-2-yl)thiochromone, and 3-di(indol-3-yl)methylthiochromones, respectively. 3-Formyl- and 3-cyanothiochromones react with primary aromatic amines and phenylhydrazine to give the corresponding anils and phenylhydrazones of 3-formyl- and 2-amino-3-formylthiochromones. The reaction of 3-cyanochromones with o-phenylenediamines gave 2-amino-3-[(2-aminophenyl)iminomethyl]-4H-chromen-4-ones.     

Reaction of furfurylidene acetone with Grignard reagents

The interaction of furfurylidene acetone with methylmagnesium iodide and ethylmagnesium halides has been studied. In the first case 2-methyl-4-(2-furyl)-3-buten-2-ol is formed as the product of 1,2-addition (yield 73 %). In the second case 4-(2-furyl)-2-hexanone (42 %) is the result of 1,4-addition, whereas 3-methyl-5-(2-furyl)-3-heptanol (45 %) is formed by consecutive 1,2- and 1,4-addition. In all cases the products of 1,3-addition were found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 921–923, May, 1993.     

3-(2-Quinolyl)- and 3-(5-carbethoxyfuryl-2)coumarins

3-(2-Quinolyl)- and 3-(5-carbethoxyfuryl-2)coumarins were prepared by reaction of substituted salicylaldehydes and hetarylacetonitriles. Alkylation and acylation of 3-hetaryl-7-hydroxycoumarins were studied. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 432–434, September–October, 2005.     

Über die Synthese von Erdalkalimetalldihalogeniden und die Strukturen von Ca3Br2CBN und Sr3Cl2CBN

On the Synthesis of Alkaline-Earth Dihalides and the Structures of Ca₃Br₂CBN and Sr₃Cl₂CBN The reaction of alkaline-earth carbonates with ammonium chloride or bromide yields alkaline-earth dihalides at relatively low temperatures (300°C). Ca₃Br₂CBN and Sr₃Cl₂CBN were synthesized in sealed niobium containers at 950°C from the metal, its dihalide, boron nitride and graphite. The crystal structure of Sr₃Cl₂CBN was refined from single crystal data. Sr₃Cl₂CBN crystallizes isotypic with Ca₃Cl₂CBN in the orthorhombic space group Pnma (No. 62) with a = 1448.4(2) pm b = 405.46(5) pm, c = 1170.0(1) pm. The lattice constants of Ca₃Br₂CBN and Sr₃Cl₂CBN were determined by orthorhombic indexing of the powder patterns (Ca₃Br₂CBN: a = 1444.3(2) pm, b = 390.64(6) pm, c = 1139.2(2) pm; Sr₃Cl₂CBN: a = 1444.0(4) pm, b = 405.27(8) pm, c = 1167.8(2) pm). There was no success in preparing homologues with Barium.