新型核壳结构纳米催化剂的三效催化活性及热稳定性

从Pd纳米粒子出发制备了具有核壳结构的新型纳米Pd@SiO₂/Ce_0.4Zr_0.6O₂三效催化剂及作为参比的Pd/Ce_0.4Zr_0.6O₂催化剂, 采用X射线衍射、 透射电子显微镜、 氢气程序升温还原和氮气低温吸附-脱附等技术对催化剂的物化性质进行了表征, 研究了Pd@SiO₂/Ce_0.4Zr_0.6O₂和Pd/Ce_0.4Zr_0.6O₂催化剂的三效反应催化活性和热稳定性. 结果表明, SiO₂壳层可以抑制Pd粒子的团聚, 同时还能抑制Pd物种的再分散, 减少Pd的流失. 具有核壳结构的纳米Pd@SiO₂/Ce_0.4Zr_0.6O₂催化剂具有更好的三效催化活性和更高的热稳定性.     

聚多巴胺功能化硅胶沉积单分散Pd纳米粒子的简易原位合成及用作醇需氧氧化反应的多相可循环使用的纳米催化剂（英文）

本文报道了一种不使用任何稳定剂或还原剂,原位合成硅胶/聚多巴胺复合物(SiO_2/PDA)负载的Pd纳米颗粒(Pd NPs)的简易方法.该方法先将PDA涂覆的SiO_2颗粒浸在Pd镀液中,然后利用PDA中含N基团的还原能力将Pd物种原位还原为纳米簇合物.并采用高分辨透射电镜、前场扫描电镜、能量散射谱、X射线衍射、X射线光电子能谱、诱导耦合等离子体和红外光谱等手段对所得纳米复合物的结构、形貌和物化性质进行了表征.被PDA基团锚合的Pd NPs具有显著的小颗粒(30–40 nm)特性.作为一个可循环使用的纳米催化剂,SiO_2/PDA/Pd NPs在醇的需氧氧化反应中表现出高活性.另外,催化剂经回收和多次重复使用时未出现明显的失活.     

Small Pd nanoparticles supported in large pores of mesocellular foam: an excellent catalyst for racemization of amines

Highly dispersed palladium nanoparticles (1–2 nm) supported in large‐pore mesocellular foam (MCF; 29 nm) were synthesized. The Pd‐nanocatalyst/MCF system was characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The performance of the Pd nanocatalyst obtained was examined for amine racemization. The Pd nanocatalyst showed higher activity and selectivity toward racemization of (S)‐1‐phenylethyl amine than any other amine racemization catalyst reported so far and it could be reused several times. Our data from TEM and XRD suggest a restructuring of the Pd nanocatalyst from amorphous to crystalline and an increase in Pd nanocatalyst size during the racemization reaction. This led to an unexpected increase of activity after the first use. The Pd nanocatalyst obtained can be integrated with other resolving processes of racemic organic compounds to increase the yield of chiral organic products.     

Organometallic polymer-functionalized Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles as a highly efficient and eco-friendly nanocatalyst for C–C bond formation

A magnetically recoverable biopolymer-based nanocatalyst was prepared through the covalent immobilization of a chitosan-bound 2-hydroxynaphthaldehyde Pd complex on the surface of superparamagnetic nanoparticles. The nanocatalyst was characterized by FTIR, X-ray powder diffraction and scanning electron microscopy, revealing an average particle size of 70 nm. The catalyst shows high thermostability by thermogravimetric analysis. Estimated Pd loading by inductively coupled plasma atomic emission analysis was found to be 0.348 mmol g^?1. The nanocatalyst exhibits excellent catalytic performance in Suzuki couplings of various aryl halides with phenylboronic acid, and Heck reactions of iodo- and bromoarenes with butylacrylate. The catalyst can be easily separated from the reaction mixture with an external magnet and reused consecutively four times without significant loss in activity.     

Urchin-like double-shelled Pd–PdO/ZnO hollow sphere as an efficient catalyst for the Suzuki-Miyaura reaction

In recent years, the modi?cation of metal oxides with noble metals to decrease the loading amount of expense of noble metal catalyst and amend the stability of nanocatalyst in chemical reactions has attracted signi?cant attention. Here in this study, the urchin-like double-shelled Pd–PdO/ZnO hollow sphere is successfully prepared by using a simple hydrothermal method and carbon sphere as a hard template. The structure of the catalyst was confirmed by using field-emission scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, energy-dispersive X-ray spectroscope, and BET. The total amount of palladium particles on ZnO was determined by induced coupled plasma analysis. The prepared catalyst gave high catalytic activity for the Suzuki reaction of aryl halides to afford biphenyls under milder conditions. Furthermore, the stability and reusability of catalyst were investigated, and all of the data proved that urchin-like double-shelled Pd–PdO/ZnO hollow sphere could be recycled five times without marked loss of activity.     

Functionalization of multi‐walled carbon nanotubes by the baclofen drug to immobilize palladium nanoparticles and catalyze Sonogashira coupling reactions

The baclofen‐MWCNTs‐Pd nanocatalyst was synthesized through covalent grafting of baclofen molecules onto surface‐modified carbon nanotubes and immobilizing Pd nanoparticles by the baclofen ligands. The chemical structure of the produced nanocatalyst was studied by Raman spectroscopy, Fourier transform‐infrared spectroscopy, energy‐dispersive spectroscopy (EDS), elemental mapping and inductively coupled plasma analysis. Also, its surface morphology was determined using the scanning and transmission electron microscopy techniques. Furthermore, the obtained baclofen‐MWCNTs‐Pd nanocatalyst is demonstrated to exhibit very high activity as a heterogeneous phosphine‐free catalyst in Sonogashira cross‐coupling of aryl halides by giving good to excellent yields of different products. In addition, the nanocatalyst can be reused four times without any significant leaching or loss of activity.     

Palladium nanoparticles supported on cucurbit[6]uril: an efficient heterogeneous catalyst for the Suzuki reaction under mild conditions

A new NC palladacycle was synthesized and supported on cucurbit[6]uril (CB[6]). The CB[6]‐supported palladium was used as an efficient nanocatalyst for the Suzuki reaction. In these reactions various aryl halides were reacted with arylboronic acids in H₂O–EtOH at both room temperature and 40 °C. The obtained Pd nanocatalyst exhibited excellent reactivity and stability in C ? C bond formation, which confirms that the catalyst is a completely active heterogeneous species. The Pd nanocatalyst was characterized using X‐ray diffraction, scanning electron microscopy and transmission electron microscopy. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced catalytic activity of ternary NiCoPd nanocatalyst dispersed on carbon nanotubes toward methanol oxidation reaction in alkaline media

Ternary NiCoPd nanocatalyst dispersed on multi-walled carbon nanotubes (CNTs), NiCoPd/CNTs, was synthesized using a simple and green sonochemical method. The as-prepared NiCoPd/CNT hybrids were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma-atomic emission spectrometry (ICP-AES). The electrochemical measurements revealed that the ternary NiCoPd/CNTs exhibited an enhanced electrocatalytic activity for the methanol oxidation reaction (MOR), much superior to those of the binary NiPd/CNT and CoPd/CNT, as well as monometallic Pd/CNT counterparts, which likely resulted from the synergistic function of the dopant metals of Ni and Co.     

Immobilization of copper nanoparticles on WO3 with enhanced catalytic activity for the synthesis of 1,2,3-triazoles

In this study, a heterogeneous catalyst based on copper nanoparticles immobilized on metal oxide, WO₃, was fabricated using an impregnation method as an easy and straightforward nanoparticle synthesis strategy. The successful synthesis of the nanocatalyst was confirmed using various spectroscopic techniques such as X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, and transmission electron microscopy. The catalytic performance of the well-characterized material was evaluated through the azide–alkyne cycloaddition reaction (click reaction) in the aqueous medium. To optimize reaction conditions, different reaction parameters such as nanocatalyst amount, reaction time, temperature, and solvents were studied. Experimental results showed that as-prepared nanocatalyst (Cu/WO₃) could act as an effective and reusable heterogeneous catalyst in water for the synthesis of 1,2,3-triazoles in good-to-excellent yields. In addition, Cu/WO₃ has some advantages such as simple preparation procedure, easy separation, and recyclability for three runs with no remarkable loss of catalytic activity, which is essential from a catalytic application point of view.     

HypoGel负载Pd纳米催化剂制备与表征及温和条件下催化Suzuki反应(英文)

A new heterogeneous catalyst composed of Pd nanoparticles immobilized within a HypoG el resin has been prepared in the absence of any ligands using an extensive cross-linking method.This newly developed nanocatalyst was characterized by N_2 adsorption-desorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),energy dispersive X-ray(EDX),Fourier transform infrared spectroscopy and inductively coupled plasma-mass spectrometer(ICP-MS)techniques.TEM and XRD results revealed that the Pd nanoparticles were well dispersed with diameters in the range of 4–12 nm,and an average size of about 8 nm.The cross-linked Pd catalyst demonstrated excellent catalytic activity towards the synthesis of a series of biaryl compounds by the reaction of various aryl halides(e.g.,bromides andiodides)with phenylboronic acid in the presence of tetrabutylammonium bromide.ICP-MS analysis indicated that there was only 0.25%weight loss of Pd(0.55±0.02 ppm)from the supported catalyst after the first cycle reaction.Furthermore,the catalyst showed excellent reusability(up to five uses)with consistently high levels of catalytic activity following its recovery by filtration.     

Polyaniline-Supported Zinc Oxide (ZnO) Nanoparticles: An Active and Stable Heterogeneous Catalyst for the Friedel–Crafts Acylation Reaction

We report herein the synthesis of zinc oxide (ZnO) nanoparticles incorporating a polyaniline (PANI) matrix in aqueous medium and its catalytic performance toward Friedel–Crafts acylation reactions. The acylation reactions demonstrate that polyaniline/nano-ZnO composites are very active catalysts and are able to activate the reactant at ambient temperature. The obtained nanocatalyst was characterized by Fourier transform–infrared, scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller, X-ray diffraction, and particle-size analysis techniques. The catalyst was reusable for five cycles without appreciable loss in activity.     

Catalytic Performance of Carbon Materials Supported Pd Nanoparticles in Selective Hydrogenation of Acetylene

Pd/C catalysts were prepared by deposited Pd nanoparticles (NPs) on different carbon supports including activated carbon (AC), graphite oxide (GO), and reduced graphite oxide (rGO) using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.     

Green synthesis of silver nanoparticles using Eucalyptus comadulensis leaves extract and its immobilization on magnetic nanocomposite (GO-Fe3O4/PAA/Ag) as a recoverable catalyst for degradation of organic dyes in water

The magnetically recyclable graphene oxide-Fe₃O₄/polyallylamine (PAA)/Ag nanocatalyst was prepared via a green route using Eucalyptus comadulensis leaves extract as both reducing and stabilizing agent. The catalytic activity of this nanocatalyst was investigated for the reduction reaction of methylene blue and methyl orange in the presence of NaBH₄ in aqueous medium at room temperature. The prepared nanocatalyst was characterized by different methods such as Fourier transformed infrared spectroscopy, X-ray diffraction, scanning electron microscopy–energy dispersive X–ray spectroscopy, thermogravimetric analysis, vibrating sample magnetometer, transmission electron microscopy, and UV–visible spectroscopy. The results show that graphene oxide/PAA/Ag nanocatalyst has good activity and recyclability, and can be reused several times without major loss of activity in the reduction process. The apparent rate constants of the methyl orange (MO) and methylene blue (MB) were calculated to be 0.077 s⁻¹ (3 mg of catalyst) and 0.15 s⁻¹ (2 mg of catalyst), respectively.     

Magnetic methylene-based mesoporous organosilica composite-supported IL/Pd: a powerful and highly recoverable catalyst for oxidative coupling of phenols and naphthols

A novel magnetic methylene-based mesoporous organosilica composite-supported IL/Pd complex (Fe₃O₄@MePMO-IL/Pd) was synthesized and characterized, and its catalytic performance was investigated. The preparation of the Fe₃O₄@MePMO composite was achieved through coating of Fe₃O₄ nanoparticles with a mixture of tetramethoxysilane, bis(triethoxysilyl)methane, and (3-chloropropyl)-trimethoxysilane in the presence of cetyltrimethylammonium bromide surfactant. The Fe₃O₄@MePMO was then modified with alkyl imidazolium ionic liquid and palladium species to deliver the Fe₃O₄@MePMO-IL/Pd nanocatalyst. This catalyst was characterized using Fourier transform infrared, thermal gravimetric, wide-angle powder X-ray diffraction, low-angle powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, energy-dispersive X-ray, and nitrogen adsorption–desorption analyses. The Fe₃O₄@MePMO-IL/Pd was effectively used as a highly recoverable and durable catalyst for the selective oxidative coupling of phenols and 2-naphthols under aerobic conditions.     

石墨烯-富勒烯铵碘盐复合载体负载Pd催化剂的制备及电催化氧化乙醇性能

采用水合肼水热还原法制备了不同比例还原氧化石墨烯(RGO)与n型自掺杂富勒烯铵碘盐(PCBANI)的复合载体RGO-PCBANI, 并在电极上用这些载体负载Pd纳米粒子制备了Pd/RGO-PCBANI电催化剂. 利用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线衍射(XRD)及X射线光电子能谱(XPS)对RGO-PCBANI和Pd/RGO-PCBANI的形貌及结构进行了表征. 利用循环伏安和计时电流等电化学方法研究了该催化剂电催化氧化乙醇的性能. 结果表明, 所制备的RGO-PCBANI(6∶1)载体的分散性较好, 用其负载的Pd纳米粒子平均粒径为5.2 nm, 且Pd/RGO-PCBANI(6∶1)催化剂的催化活性最好, 质量电流密度达到1288.8 mA/mg.     

还原态氧化石墨烯载Pd纳米催化剂对甲酸氧化的电催化性能

采用改进的Hummers法氧化石墨后,对其超声剥离成氧化石墨烯水溶液,继之通过乙二醇还原Pd金属离子和氧化石墨烯,得到了还原态氧化石墨烯（RGO）负载Pd纳米催化剂,并用于甲酸的电催化氧化.透射电子显微镜和X射线衍射结果显示：负载于RGO上的Pd粒子平均粒径为3.8nm,其优先在RGO的褶皱和边缘处生长.电化学测试表明：RGO上残存的含氧基团降低了Pd催化剂受CO毒化的程度,Pd/RGO催化剂表现出了较商业化Pd/C更高的电催化活性和更好的稳定性.     

Synthesis and characterization of Fe3O4@SiO2–polymer-imid–Pd magnetic porous nanospheres and their application as a novel recyclable catalyst for Sonogashira–Hagihara coupling reactions

We demonstrate herein the modification of magnetic nanoparticles and their use as a magnetic nanocatalyst in direct coupling reactions of aryl halides with terminal alkynes. Magnetite particles were prepared by simple co-precipitation method in aqueous medium, and then Fe₃O₄@ SiO₂ nanosphere was synthesized by using nano-Fe₃O₄ as the core, TEOS as the silica source and PVA as the surfactant. Fe₃O₄@SiO₂ was coated with polymeric N-heterocyclic carbene/Pd. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometer and N₂ adsorption–desorption isotherm analysis. Poly (N-vinyl imidazole) functionalized Fe₃O₄@SiO₂ nanoparticle was found to be an efficient nanocatalyst in Sonogashira–Hagihara cross-coupling reactions. The nanocatalyst can be easily recovered by a magnetic field and reused for six runs without appreciable loss of its catalytic activity.     

不同载体负载Pd催化剂对甲酸的电催化氧化活性比较

应用Hummers法氧化合成氧化石墨(GO), 然后用化学一步还原法制得石墨烯（graphene）负载Pd催化剂. 用同样方法以多壁碳纳米管（MWCNTs）、单壁碳纳米管（SWCNTs）和Vulcan XC-72为载体制备了不同负载型的Pd催化剂. X射线衍射(XRD)、透射电镜(TEM)表征表明,在石墨烯载体上Pd纳米粒子粒径较小,且分布均匀. 电化学活性面积(ECSA)、循环伏安(CV)、计时电流(CA)和计时电位(CP)电化学测试显示, 与其它3种碳载体的Pd催化剂相比, 石墨烯负载Pd催化剂对甲酸电催化氧化的催化活性和稳定性最好.     

Anchored complexes of Ni,Pt, and Pd on Fe3O4 nanoparticles as new and eco-friendly nanocatalysts in Suzuki and Heck coupling reactions

Abstract

Three recoverable nanocatalysts were developed by immobilizing Ni, Pt, and Pd Schiff-base complexes on the magnetite nanoparticles. Successful preparation of the nanocatalysts was evidenced by Fourier transform infrared (FT-IR) and energy dispersive X-ray (EDX) spectroscopy. Nano-sized spherical structure of the nanocatalysts was indicated by scanning electron microscopy (SEM). X-ray powder diffraction (XRD) determined that the crystalline cubic spinel structure of Fe₃O₄ remained constant through the synthesis of three complexes on Fe₃O₄ nanoparticles. Magnetic properties of the nanocatalysts were analyzed by the vibration sample magnetometer (VSM). Thermostability of the nanocatalysts was studied by thermogravimetric analysis (TGA). Metal loading of these nanocatalysts was evidenced by inductively coupled plasma atomic emission (ICP-AES).

Investigating the catalytic activity of these nanocatalysts in Suzuki and Heck reactions implicated that in the presence of Pd nanocatalyst coupling reactions proceeded efficiently. For Pt nanocatalyst, Suzuki reaction took place in longer time with moderate to good yield. For the Heck reaction, the desired products were achieved only for aryl iodide and some aryl bromides. The Ni nanocatalyst could just catalyze the Suzuki reaction.

Relying on the magnetic characteristic, these nanocatalysts could be simply recovered and reused several cycles without significant loss in catalytic activity.     

Fabrication of nitrogen-enriched graphene oxide/Cu NPs as a highly efficient and recyclable heterogeneous nanocatalyst for the Chan–Lam cross-coupling reaction

Herein, we demonstrate the direct polymerization of melamine and cyanuric chloride in the surface of graphene oxide (GO) (N-enriched GO) in order to develop a new nanocatalyst. The supramolecular polymerized GO acts not only as a spacer to prevent the restacking of graphene sheets but also as a nitrogen source to generate active centers for Cu NP attachments. Subsequently, the nitrogen on the surface of the GO sheets coordinates with copper ions to generate copper nanoparticles. The prepared nanocatalyst was characterized by Fourier transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy and thermogravimetric analysis. This catalyst showed high efficiency and good activity in the Chan–Lam cross-coupling reaction of N-heterocycles and aniline derivatives with high yields in short reaction times. In addition, the nanocatalyst was easily recovered and reused for five consecutive runs without any noticeable loss of performance.