Subtle reactivity patterns of non-heteroatom-substituted manganese alkynyl carbene complexes in the presence of phosphorus probes

The non-heteroatom-substituted manganese alkynyl carbene complexes (eta5-MeC5H4)(CO)2Mn=C(R)C[triple bond]CR'(3; 3a: R = R'= Ph, 3b: R = Ph, R'= Tol, 3c: R = Tol, R'= Ph) have been synthesised in high yields upon treatment of the corresponding carbyne complexes [eta5-MeC5H4)(CO)2Mn[triple bond]CR][BPh4]([2][BPh4]) with the appropriate alkynyllithium reagents LiC[triple bond]CR' (R'= Ph, Tol). The use of tetraphenylborate as counter anion associated with the cationic carbyne complexes has been decisive. The X-ray structures of (eta5-MeC5H4)(CO)2Mn=C(Tol)C[triple bond]CPh (3c), and its precursor [(eta5-MeC5H4)(CO)2Mn=CTol][BPh4]([2b](BPh4]) are reported. The reactivity of complexes toward phosphines has been investigated. In the presence of PPh3, complexes act as a Michael acceptor to afford the zwitterionic sigma-allenylphosphonium complexes (eta5-MeC5H4)(CO)2MnC(R)=C=C(PPh3)R' (5) resulting from nucleophilic attack by the phosphine on the remote alkynyl carbon atom. Complexes 5 exhibit a dynamic process in solution, which has been rationalized in terms of a fast [NMR time-scale] rotation of the allene substituents around the allene axis; metrical features within the X-ray structure of (eta5-MeC5H4)(CO)2MnC(Ph)=C=C(PPh3)Tol (5b) support the proposal. In the presence of PMe3, complexes undergo a nucleophilic attack on the carbene carbon atom to give zwitterionic sigma-propargylphosphonium complexes (eta5-MeC5H4)(CO)2MnC(R)(PMe3)C[triple bond]CR' (6). Complexes 6 readily isomerise in solution to give the sigma-allenylphosphonium complexes (eta5-MeC5H4)(CO)2MnC(R')=C=C(PMe3)R (7) through a 1,3 shift of the [(eta5-MeC5H4)(CO)2Mn] fragment. The nucleophilic attack of PPh2Me on 3 is not selective and leads to a mixture of the sigma-propargylphosphonium complexes (eta5-MeC5H4)(CO)2MnC(R)(PPh(2)Me)C[triple bond]CR' (9) and the sigma-allenylphosphonium complexes (eta5-MeC5H4)(CO)2MnC(R)=C=C(PPh(2)Me)R' (10). Like complexes 6, complexes 9 readily isomerize to give the sigma-allenylphosphonium complexes (eta5-MeC5H4)(CO)2MnC(R')=C=C(PPh2Me)R'). Upon gentle heating, complexes 7, and mixtures of 10 and 10' cyclise to give the sigma-dihydrophospholium complexes (eta5-MeC5H4)(CO)2MnC=C(R')PMe2CH2CH(R)(8), and mixtures of complexes (eta5-MeC5H4)(CO)2MnC=C(Ph)PPh2CH2CH(Tol)(11) and (eta5-MeC5H4)(CO)2MnC=C(Tol)PMe2CH2CH(Ph)(11'), respectively. The reactions of complexes 3 with secondary phosphines HPR(1)(2)(R1= Ph, Cy) give a mixture of the eta2-allene complexes (eta5-MeC5H4)(CO)2Mn[eta2-{R(1)(2)PC(R)=C=C(R')H}](12), and the regioisomeric eta4-vinylketene complexes [eta5-MeC5H4)(CO)Mn[eta4-{R(1)(2)PC(R)=CHC(R')=C=O}](13) and (eta5-MeC5H4)(CO)Mn[eta4-{R(1)(2)PC(R')=CHC(R)=C=O}](13'). The solid-state structure of (eta5-MeC5H4)(CO)2Mn[eta2-{Ph2PC(Ph)=C=C(Tol)H}](12b) and (eta5-MeC5H4)(CO)Mn[eta4-{Cy2PC(Ph)=CHC(Ph)=C=O}](13d) are reported. Finally, a mechanism that may account for the formation of the species 12, 13, and 13' is proposed.     

The synthesis of [FeRu(CO)2(mu-CO)2(eta-C5H5)(eta-C5Me5)] and convenient entries to its organometallic chemistry

The synthesis, fluxionality and reactivity of the heterobimetallic complex [FeRu(CO)2(mu-CO)2(eta-C5H5)(eta-C5Me5)] are described. Complex exhibits enhanced photolytic reactivity towards alkynes compared to its homometallic analogues, forming the dimetallacyclopentenone complexes [FeRu(CO)(mu-CO){mu-eta]1:eta3-C(O)CR"CR'}eta]-C5H5)(eta-C5Me5)]( R'= R"= H; R'= R"= CO2Me; R'= H, R"= CMe2OH). Prolonged photolysis with diphenylethyne gives the dimetallatetrahedrane complex [FeRu(mu-CO)(mu-eta2:eta2-CPhCPh)(eta-C5H5)(eta-C5Me5)], which contains the first iron-ruthenium double bond. Complexes containing a number of organic fragments can be synthesised using , and . Heating a solution of gave the alkenylidene complex [FeRu(CO)2(mu-CO){mu-eta]1:eta2-C=C(CO2Me)2}(eta-C5H5)(eta-C5Me5)] through an unusual methylcarboxylate migration. Protonation and then addition of hydride to gives the ethylidene complex [FeRu(CO)2(mu-CO)(mu-CHCH3)(eta-C5H5)(eta-C5Me5)] via the ionic vinyl species [FeRu(CO)2(mu-CO)(mu-eta]1:eta2-CH=CH2)(eta-C5H5)(eta-C5Me5)][BF4]. Compound exhibits cis/trans isomerisation at room temperature. Protonation of dimetallacyclopentenone complexes gives the allenyl species [FeRu(CO)2(mu-CO)(mu-eta1:eta2-CH=C=CMe2)(eta-C5H5)(eta-C5Me5)][BF4]. Compound exist as three isomers, two cis and one trans. The two cis isomers are shown to be interconverting by sigma-pi isomerisation. The solid state structures of these compounds were established by X-ray crystallography and are discussed.     

C-C coupling reactions in the coordination sphere of rhodium(I) and rhodium(III): New routes for the di- and trimerization of terminal alkynes

The alkynyl(vinylidene)rhodium(I) complexes trans-[Rh(C[triple bond, length as m-dash]CR)(=C=CHR)(PiPr3)2] 2, 5, 6 react with CO by migratory insertion to give stereoselectively the butenynyl compounds trans-[Rh{eta1-(Z)-C(=CHR)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-7-9, of which (Z)-7 (R=Ph) and (Z)-8 (R=tBu) rearrange upon heating or UV irradiation to the (E) isomers. Similarly, trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CPh}(CO)(PiPr3)2] 12 and trans-[Rh{eta1-(Z)-C(=CHCO2Me)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-15, (Z)-16 have been prepared. At room temperature, the corresponding "non-substituted" derivative trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CH}(CO)(PiPr3)2] 18 is in equilibrium with the butatrienyl isomer trans-[Rh(eta1-CH=]C=C=CH2)(CO)(PiPr3)2] 19 that rearranges photochemically to the alkynyl complex trans-[Rh(C[triple bond, length as m-dash]CCH=CH2)(CO)(PiPr3)2] 20. Reactions of (Z)-7, (E)-7, (Z)-8 and (E)-8 with carboxylic acids R'CO2H (R'=CH3, CF3) yield either the butenyne (Z)- and/or (E)-RC[triple bond, length as m-dash]CCH=CHR or a mixture of the butenyne and the isomeric butatriene, the ratio of which depends on both R and R'. Treatment of 2 (R=Ph) with HCl at -40 degrees C affords five-coordinate [RhCl(C[triple bond, length as m-dash]CPh){(Z)-CH=CHPh}(PiPr3)2] 23, which at room temperature reacts by C-C coupling to give trans-[RhCl{eta2-(Z)-PhC[triple bond, length as m-dash]CCH=CHPh}(PiPr3)2](Z)-21. The related compound trans-[RhCl(eta2-HC[triple bond, length as m-dash]CCH=CH2)(PiPr3)2] 27, prepared from trans-[Rh(C[triple bond, length as m-dash]CH)(=C=CH2)(PiPr3)2] 17 and HCl, rearranges to the vinylvinylidene isomer trans-[RhCl(=C=CHCH=CH2)(PiPr3)2] 28. While stepwise reaction of 2with CF3CO2H yields, via alkynyl(vinyl)rhodium(III) intermediates (Z)-29 and (E)-29, the alkyne complexes trans-[Rh(kappa1-O2CCF3)(eta2-PhC[triple bond, length as m-dash]CCH=CHPh)(PiPr3)2](Z)-30 and (E)-30, from 2 and CH3CO2H the acetato derivative [Rh(kappa2-O2CCH3)(PiPr3)2] 33 and (Z)-PhC[triple bond, length as m-dash]CCH=]CHPh are obtained. From 6 (R=CO2Me) and HCl or HC[triple bond, length as m-dash]CCO2Me the chelate complexes [RhX(C[triple bond, length as m-dash]CCO2Me){kappa2(C,O)-CH=CHC(OMe)=O}(PiPr3)2] 34 (X=Cl) and 35 (X=C[triple bond, length as m-dash]CCO2Me) have been prepared. In contrast to the reactions of [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE)(CH=CHE)(PiPr3)2] 37(E=CO2Me) with chloride sources which give, via intramolecular C-C coupling, four-coordinate trans-[RhCl{eta2-(E)-EC[triple bond, length as m-dash]CCH=CHE}(PiPr3)2](E)-36, treatment of 37with HC[triple bond, length as m-dash]CE affords, via insertion of the alkyne into the rhodium-vinyl bond, six-coordinate [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE){eta1-(E,E)-C(=CHE)CH=CHE}(PiPr3)2] 38. The latter reacts with MgCl2 to yield trans-[RhCl{eta2-(E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE}(PiPr3)2] 39, which, in the presence of CO, generates the substituted hexadienyne (E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE 40.     

Synthesis, structural characterization, and ligand replacement reactions of gem-dithiolato-bridged rhodium and iridium complexes

The reaction of gem-dithiol compounds R 2C(SH) 2 (R = Bn (benzyl), (i) Pr; R 2 = -(CH 2) 4-) with dinuclear rhodium or iridium complexes containing basic ligands such as [M(mu-OH)(cod)] 2 and [M(mu-OMe)(cod)] 2, or the mononuclear [M(acac)(cod)] (M = Rh, Ir, cod = 1,5-cyclooctadiene) in the presence of a external base, afforded the dinuclear complexes [M 2(mu-S 2CR 2)(cod) 2] ( 1- 4). The monodeprotonation of 1,1-dimercaptocyclopentane gave the mononuclear complex [Rh(HS 2Cptn)(cod)] ( 5) that is a precursor for the dinuclear compound [Rh 2(mu-S 2Cptn)(cod) 2] ( 6). Carbonylation of the diolefin compounds gave the complexes [Rh 2(mu-S 2CR 2)(CO) 4] ( 7- 9), which reacted with P-donor ligands to stereoselectively produce the trans isomer of the disubstituted complexes [Rh 2(mu-S 2CR 2)(CO) 2(PR' 3) 2] (R' = Ph, Cy (cyclohexyl)) ( 10- 13) and [Rh 2(mu-S 2CBn 2)(CO) 2{P(OR') 3} 2] (R' = Me, Ph) ( 14- 15). The substitution process in [Rh 2(mu-S 2CBn 2)(CO) 4] ( 7) by P(OMe) 3 has been studied by spectroscopic means and the full series of substituted complexes [Rh 2(mu-S 2CBn 2)(CO) 4- n {P(OR) 3} n ] ( n = 1, 4) has been identified in solution. The cis complex [Rh 2(mu-S 2CBn 2)(CO) 2(mu-dppb)] ( 16) was obtained by reaction of 7 with the diphosphine dppb (1,4-bis(diphenylphosphino)butane). The molecular structures of the diolefinic dinuclear complexes [Rh 2(mu-S 2CR 2)(cod) 2] (R = Bn ( 1), (i) Pr ( 2); R 2 = -(CH 2) 4- ( 6)) and that of the cis complex 16 have been studied by X-ray diffraction.     

Unusual pathways for metal-assisted C[bond]C and C[bond]P coupling reactions using allenylidenerhodium complexes as precursors

The rhodium allenylidenes trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = Ph (1), p-Tol (2)] react with NaC(5)H(5) to give the half-sandwich type complexes [(eta(5)-C(5)H(5))Rh[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))] (3, 4). The reaction of 1 with the Grignard reagent CH(2)[double bond]CHMgBr affords the eta(3)-pentatrienyl compound [Rh(eta(3)-CH(2)CHC[double bond]C[double bond]CPh(2))(PiPr(3))(2)] (6), which in the presence of CO rearranges to the eta(1)-pentatrienyl derivative trans-[Rh[eta(1)-C(CH[double bond]CH(2))[double bond]C[double bond]CPh(2)](CO)(PiPr(3))(2)] (7). Treatment of 7 with acetic acid generates the vinylallene CH(2)[double bond]CH[bond]CH[double bond]=C=CPh(2) (8). Compounds 1 and 2 react with HCl to give the five-coordinate allenylrhodium(III) complexes [RhCl(2)[CH[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (10, 11). An unusual [C(3) + C(2) + P] coupling process takes place upon treatment of 1 with terminal alkynes HC[triple bond]CR', leading to the formation of the eta(3)-allylic compounds [RhCl[eta(3)-anti-CH(PiPr(3))C(R')C[double bond]C[double bond]CPh(2)](PiPr(3))] [R' = Ph (12), p-Tol (13), SiMe(3) (14)]. From 12 and RMgBr the corresponding phenyl and vinyl rhodium(I) derivatives 15 and 16 have been obtained. The previously unknown unsaturated ylide iPr(3)PCHC(Ph)[double bond]C[double bond]C[double bond]CPh(2) (17) was generated from 12 and CO. A [C(3) + P] coupling process occurs on treatment of the rhodium allenylidenes 1, 2, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(p-Anis)(2)](PiPr(3))(2)] (20) with either Cl(2) or PhICl(2), affording the ylide-rhodium(III) complexes [RhCl(3)[C(PiPr(3))C[double bond]C(R)R'](PiPr(3))] (21-23). The butatrienerhodium(I) compounds trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (28-31) were prepared from 1, 20, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = CF(3) (26), tBu (27)] and diazomethane; with the exception of 30 (R = CF(3), R' = Ph), they thermally rearrange to the isomers trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (32, 33, and syn/anti-34). The new 1,1-disubstituted butatriene H(2)C[double bond]C[double bond]C[double bond]C(tBu)Ph (35) was generated either from 31 or 34 and CO. The iodo derivatives trans-[RhI(eta(2)-H(2)C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] [R = Ph (38), p-Anis (39)] were obtained by an unusual route from 1 or 20 and CH(3)I in the presence of KI. While the hydrogenation of 1 and 26 leads to the allenerhodium(I) complexes trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (40, 41), the thermolysis of 1 and 20 produces the rhodium(I) hexapentaenes trans-[RhCl(eta(2)-R(2)C[double bond]C[double bond]C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] (44, 45) via C-C coupling. The molecular structures of 3, 7, 12, 21, and 28 have been determined by X-ray crystallography.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Reduction of an eta2-iminoacyl ligand to eta2-iminium enabled by adjacent carbon monoxide ligand replacement with a variable electron donor alkyne ligand in a cationic Tungsten(II) bis(acetylacetonate) complex

Cationic iminoacyl-carbonyl tungsten complexes of the type [W(CO) (eta (2)-MeNCR)(acac) 2] (+) (acac = acetylacetonate; R = Ph ( 1a), Me ( 1b)) easily undergo thermal substitution of CO with two-electron donors to yield [W(L)(eta (2)-MeNCR)(acac) 2] (+) (L = tert-butylisonitrile [R = Ph ( 2a), Me ( 2b)], 2,6-dimethylphenylisonitrile [R = Me ( 2c)], triphenylphosphine [R = Ph ( 3a), Me ( 3c)], and tricyclohexylphosphine [R = Ph ( 3b)]). Tricyclohexylphosphine complex 3b exhibits rapid, reversible phosphine ligand exchange at room temperature on the NMR time scale. Photolytic replacement of carbon monoxide with either phenylacetylene or 2-butyne occurs efficiently to form [W(eta (2)-alkyne)(eta (2)-MeNCR)(acac) 2] (+) complexes ( 5a- d) with a variable electron donor eta (2)-alkyne paired with the eta (2)-iminoacyl ligand in the W(II) coordination sphere. PMe 3 adds to 1a or 5b to form [W(L)(eta (2)-MeNC(PMe 3)Ph)(acac) 2] (+) [L = CO ( 4), MeCCMe ( 6)] via nucleophilic attack at the iminoacyl carbon. Addition of Na[HB(OMe) 3] to 5b yields W(eta (2)-MeCCMe)(eta (2)-MeNCHPh)(acac) 2, 8, which exhibits alkyne rotation on the NMR time scale. Addition of MeOTf to 8 places a second methyl group on the nitrogen atom to form an unusual cationic eta (2)-iminium complex [W(eta (2)-MeCCMe)(eta (2)-Me 2NCHPh)(acac) 2][OTf] ( 9[OTf], OTf = SO 3CF 3). X-ray structures of 2,6-dimethylphenylisonitrile complex 2c[BAr' 4 ], tricyclohexylphosphine complex 3b[BAr' 4 ], and phenylacetylene complex 5a[BAr' 4 ] confirm replacement of CO by these ligands in the [W(L)(eta (2)-MeNCR)(acac) 2] (+) products. X-ray structures of alkyne-imine complexes 6[BAr' 4 ] and 8 show products resulting from nucleophilic addition at the iminoacyl carbon, and the X-ray structure of 9[BAr' 4 ] reflects methylation at the imine nitrogen to form a rare eta (2)-iminium ligand.     

Highly regioselective hydroformylation with hemispherical chelators

The hemispherical diphosphites (R,R)- or (S,S)-5,11,17,23-tetra-tert-butyl-25,27-di(OR)-26,28-bis(1,1'-binaphthyl-2,2'-dioxyphosphanyloxy)calix[4]arene (R=OPr, OCH(2)Ph, OCH(2)-naphtyl, O-fluorenyl; R=H, R'=OPr) (L(R)), all with C(2) symmetry, have been synthesised starting from the appropriate di-O-alkylated calix[4]arene precursor. In the presence of [Rh(acac)(CO)(2)], these ligands straightforwardly provide chelate complexes in which the metal centre sits in a molecular pocket defined by two naphthyl planes related by the C(2) axis and the two apically situated R groups. Hydroformylation of octene with the L(Pr)/Rh system turned out to be highly regioselective, the linear-to-branched (l:b) aldehyde ratio reaching 58:1. The l:b ratio significantly increased when the propyl groups were replaced by -CH(2)Ph (l:b=80) or -CH(2)naphthyl (l:b=100) groups, that is, with substituents able to sterically interact with the apical metal sites, but without inducing an opening of the cleft nesting the catalytic centre. The trend to preferentially form the aldehyde the shape of which fits with the shape of the catalytic pocket was further confirmed in the hydroformylation of styrene, for which, in contrast to catalysis with conventional diphosphanes, the linear aldehyde was the major product (up to ca. 75 % linear aldehyde). In the hydroformylation of trans-2-octene with the L(benzyl)/Rh system, combined isomerisation/hydroformylation led to a remarkably high l:b aldehyde ratios of 25, thus showing that isomerisation is more effective than hydroformylation. Unusually large amounts of linear products were also observed with all the above diphosphites in the tandem hydroformylation/amination of styrene (l:b of ca. 3:1) as well as in the hydroformylation of allyl benzyl ether (l:b ratio up to 20).     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Carbenerhodium complexes of the half-sandwich-type: synthesis, substitution, and addition reactions

A series of carbenerhodium(I) complexes of the general composition [(eta5-C5H5)Rh(=CRR')(L)] (2a-2i) with R = R'= aryl and L = SbiPr3 or PR3 has been prepared from the square-planar precursors trans-[RhCl(=CRR')(L)2] and NaC5H5 in excellent yields. Reaction of the triisopropylsibane derivative 2a. which contains a rather labile Rh-Sb bond, with CO, PMe3, and CNR (R = Me, CH2Ph, tBu) leads to the displacement of the SbiPr3 ligand and affords the substitution products [(eta5-C5H5)Rh(=CPh2)(L)] (3-7). In contrast, treatment of the triisopropylphosphane compound 2c with CO and CNtBu leads to the cleavage of the Rh=CPh2 bond and gives besides [(eta5-C5H5)Rh(PiPr3)(L)] (10, 12) by metal-assisted C-C coupling diphenylketene Ph2C=C=O (11) or the corresponding imine Ph2C=C=NtBu (13). While the reaction of 2a, c with C2H4 yields [(eta5-C5H5)Rh(C2H4)(L)] (14, 15) and the trisubstituted olefin Ph2C=CHCH3 (16), treatment of 2a, c with RN3 leads to the cleavage of both the Rh-EiPr3 and Rh=CPh2 bonds and gives the chelate complexes [(eta5-C5H5)Rh(kappa2-RNNNNR)] (19, 20). The substitution products 3 (L=CO) and 4 (L= PMe3) react with an equimolar amount of sulfur or selenium by addition of the chalcogen to the Rh=CPh2 bond to generate the complexes [(eta5-C5H5)Rh(kappa2-ECPh2)(L)] (21-24) with thio- or selenobenzophenone as ligand. Similarly, treatment of 3 with CuCl affords the unusual 1:2 adduct [(eta5-C5H5)(CO)Rh(mu-CPh2)(CuCl)2] (25), which reacts with NaC5H5 to form [(eta5-C5H5)(CO)Rh(muCPh2)Cu(eta5-C5H5)] (26). The molecular structures of 3 and 22 have been determined by X-ray crystallography.     

Reactions of the tetrahedral clusters [MCo(3)(CO)(12)](-) (M = Ru, Fe) with functional mono- and diynes

The tetrahedral cluster [RuCo(3)(CO)(12)](-) reacts with various alkynes, including the new PhCtbd1;CC(O)NHCH(2)Ctbd1;CH (L(1)()), to afford the butterfly clusters [RuCo(3)(CO)(10)(micro(4)-eta(2)-RC(2)R')](-) (1, R = R' = C(O)OMe; 2, R = H, R' = Ph; 3, R = H, R' = MeC=CH(2); 4, R = H, R' = CH(2)OCH(2)Ctbd1;CH; 5, R = H, R' = CH(2)NHC(O)Ctbd1;CPh), in which the ruthenium atom occupies a hinge position and the alkyne is coordinated in a micro(4)-eta(2) fashion. Reaction of the anions 1-3 with [Cu(NCMe)(4)]BF(4) led to selective loss of the 12e fragment Co(CO)(-) to form [RuCo(2)(CO)(9)(micro(3)-eta(2)-RC(2)R')] (6, R = R' = C(O)OMe; 7, R = H, R' = Ph; 8, R = H, R' = MeC=CH(2)). To prepare functionalized RuCo(3) or FeCo(3) clusters that could be subsequently condensed with a silica matrix via the sol-gel method, we reacted [MCo(3)(CO)(12)](-) (M = Ru, Fe) with the alkyne PhCtbd1;CC(O)NH(CH(2))(3)Si(OMe)(3)(L(2)()) and obtained the butterfly clusters [MCo(3)(CO)(10)(micro(4)-eta(2)-PhC(2)C(O)NH(CH(2))(3)Si(OMe)(3))](-) 9 and 10, respectively. Air-stable [RuCo(3)(CO)(10)(micro(4)-eta(2)-Me(3)SiC(2)Ctbd1;CSiMe(3))](-) (11) was obtained from 1,4-bis(trimethylsilyl)butadiyne and reacted with [Cu(NCMe)(4)]BF(4) to give [RuCo(2)(CO)(9)(micro(3)-eta(2)-HC(2)Ctbd1;CSiMe(3))] (12), owing to partial ligand proto-desilylation, and not the expected [RuCo(2)(CO)(9)(micro(3)-eta(2)-Me(3)SiC(2)Ctbd1;CSiMe(3))]. Reaction of 11 with [NO]BF(4) afforded, in addition to 12, [RuCo(3)(CO)(9)(NO)(micro(4)-eta(2)-Me(3)SiC(2)Ctbd1;CSiMe(3))] (13) owing to selective CO substitution on a wing-tip cobalt atom with NO. The thermal reaction of 11 with [AuCl(PPh(3))] led to replacement of a CO on Ru by the PPh(3) originating from [AuCl(PPh(3))] and afforded [RuCo(3)(CO)(9)(PPh(3))(micro(4)-eta(2)-Me(3)SiC(2)Ctbd1;CSiMe(3))](-) (14), also obtained directly by reaction of 11 with one equivalent of PPh(3). Proto-desilylation of 11 using TBAF/THF-H(2)O afforded [RuCo(3)(CO)(10)(micro(4)-eta(2)-Me(3)SiC(2)Ctbd1;CH)](-) (15) which, by Sonogashira coupling with 1,4-diiodobenzene, yielded the dicluster complex [[RuCo(3)(CO)(10)(micro(4)-eta(2)-Me(3)SiC(2)Ctbd1;C)]](2)C(6)H(4)](2)(-) (16). The crystal structures of NEt(4).3a, NEt(4).4a, 6, NEt(4).11b, NEt(4).14, and [N(n-Bu)(4)].15a have been determined by X-ray diffraction. Preliminary results indicate the potential of silica-tethered alkyne mixed-metal clusters, obtained by the sol-gel method, as precursors to bimetallic particles.     

Base induced P-C bond cleavage in a coordinated bis(dimethylphosphino)methane ligand

Treatment of fac-[Mn(CNR)(CO)3{(PMe2)2CH2}]ClO4 (1a R = Ph, R = tBu) with KOH produced the cleavage of one of the P-C bonds of the coordinated dmpm ligand, resulting in the formation of phosphine-phosphinite complexes fac-[Mn(PMe2O)(CNR)(CO)3(PMe3)] (2a,b). Alkoxides such as NaOMe and NaOEt promoted similar processes in 1a,b, yielding fac-[Mn(CNR)(CO)3(PMe3)(PMe2OR')]ClO4 (3a R = tBu, R' = Me; 3b R = Ph, R' = Me; 4a R = tBu, R' = Et; 4b R = Ph, R' = Et) derivatives. The phosphinite ligand in 2a, b can be sequentially protonated by addition of 0.5 and 1 equivalent of HBF4 leading to fac-[{Mn(CNR)(CO)3(PMe3)(PMe2O)}2H]BF4 (6a,b) and fac-[Mn(CNR)(CO)3(PMe3)(PMe2OH)]BF4 (5a,b), respectively.     

High-pressure investigations under CO/H2 of rhodium complexes containing hemispherical diphosphites

The two rhodium complexes [Rh(acac)(L(R))] (L(R)=(S,S)-5,11,17,23-tetra-tert-butyl-25,27-di(OR)-26,28-bis(1,1'-binaphthyl-2,2'-dioxyphosphanyloxy)calix[4]arene; 6: R=benzyl, 7: R=fluorenyl), each based on a hemispherical chelator forming a pocket about the metal centre upon chelation, are active in the hydroformylation of 1-octene and styrene. As expected for this family of diphosphanes, both complexes resulted in remarkably high selectivity towards the linear aldehyde in the hydroformylation of 1-octene (l/b≈15 for both complexes). Linear aldehyde selectivity was also observed when using styrene, but surprisingly only 6 displayed a marked preference for the linear product (l/b=12.4 (6) vs. 1.9 (7)). A detailed study of the structure of the complexes under CO or CO/H(2) in toluene was performed by high-pressure NMR (HP NMR) and FT-IR (HP-IR) spectroscopies. The spectroscopic data revealed that treatment of 6 with CO gave [Rh(acac)(CO)(η(1)-L(benzyl))] (8), in which the diphosphite behaves as a unidentate ligand. Subsequent addition of H(2) to the solution resulted in a well-defined chelate complex with the formula [RhH(CO)(2)(L(benzyl))] (9). Unlike 6, treatment of complex 7 with CO only led to ligand dissociation and concomitant formation of [Rh(acac)(CO)(2)], but upon addition of H(2) a chelate complex analogous to 9 was formed quantitatively. In both [RhH(CO)(2)(L(R))] complexes the diphosphite adopts the bis-equatorial coordination mode, a structural feature known to favour the formation of linear aldehydes. As revealed by variable-temperature NMR spectroscopy, these complexes show the typical fluxionality of trigonal bipyramidal [RhH(CO)(2)(diphosphane)] complexes. The lower linear selectivity of 7 versus 6 in the hydroformylation of styrene was assigned to steric effects, due to the pocket in which the catalysis takes place being less adapted to accommodate CO or larger olefins and, therefore, possibly leading to facile ligand decoordination. This interpretation was corroborated by an X-ray structure determination carried out for 7.     

M-P versus M=M bonds as protonation sites in the organophosphide-bridged complexes [M2Cp2(mu-PR2)(mu-PR'2)(CO)2], (M = Mo, W; R, R' = Ph, Et, Cy)

The unsaturated complexes [W2Cp2(mu-PR2)(mu-PR'2)(CO)2] (Cp = eta5-C5H5; R = R' = Ph, Et; R = Et, R' = Ph) react with HBF4.OEt2 at 243 K in dichloromethane solution to give the corresponding complexes [W2Cp2(H)(mu-PR2)(mu-PR'2)(CO)2]BF4, which contain a terminal hydride ligand. The latter rearrange at room temperature to give [W2Cp2(mu-H)(mu-PR2)(mu-PR'2)(CO)2]BF4, which display a bridging hydride and carbonyl ligands arranged parallel to each other (W-W = 2.7589(8) A when R = R' = Ph). This explains why the removal of a proton from the latter gives first the unstable isomer cis-[W2Cp2(mu-PPh2)2(CO)2]. The molybdenum complex [Mo2Cp2(mu-PPh2)2(CO)2] behaves similarly, and thus the thermally unstable new complexes [Mo2Cp2(H)(mu-PPh2)2(CO)2]BF4 and cis-[Mo2Cp2(mu-PPh2)2(CO)2] could be characterized. In contrast, related dimolybdenum complexes having electron-rich phosphide ligands behave differently. Thus, the complexes [Mo2Cp2(mu-PR2)2(CO)2] (R = Cy, Et) react with HBF4.OEt2 to give first the agostic type phosphine-bridged complexes [Mo2Cp2(mu-PR2)(mu-kappa2-HPR2)(CO)2]BF4 (Mo-Mo = 2.748(4) A for R = Cy). These complexes experience intramolecular exchange of the agostic H atom between the two inequivalent P positions and at room-temperature reach a proton-catalyzed equilibrium with their hydride-bridged tautomers [ratio agostic/hydride = 10 (R = Cy), 30 (R = Et)]. The mixed-phosphide complex [Mo2Cp2(mu-PCy2)(mu-PPh2)(CO)2] behaves similarly, except that protonation now occurs specifically at the dicyclohexylphosphide ligand [ratio agostic/hydride = 0.5]. The reaction of the agostic complex [Mo2Cp2(mu-PCy2)(mu-kappa2-HPCy2)(CO)2]BF4 with CN(t)Bu gave mono- or disubstituted hydride derivatives [Mo2Cp2(mu-H)(mu-PCy2)2(CO)2-x(CNtBu)x]BF4 (Mo-Mo = 2.7901(7) A for x = 1). The photochemical removal of a CO ligand from the agostic complex also gives a hydride derivative, the triply bonded complex [Mo2Cp2(H)(mu-PCy2)2(CO)]BF4 (Mo-Mo = 2.537(2) A). Protonation of [Mo2Cp2(mu-PCy2)2(mu-CO)] gives the hydroxycarbyne derivative [Mo2Cp2(mu-COH)(mu-PCy2)2]BF4, which does not transform into its hydride isomer.     

Linear-selective hydroformylation of vinyl ether using Rh (acac)(2,2′-bis{(di[1H-indol-1-yl]phosphanyl)oxy}-1,1′-binaphthalene) – Possible way to synthesize 1,3-propanediol

Three bidentate phosphoramidite ligands were synthesized, characterized, and employed in Rh-catalyzed hydroformylation of vinyl ethers. The complex Rh(acac)(2,2′-bis{(di[1H-indol-1-yl]phosphanyl)oxy}-1,1′-binaphthalene} (acac = acetylacetone) (Rh- L4 ) was also synthesized and characterized. Rh- L4 showed good regioselectivity for the hydroformylation of vinyl ethers under mild reaction conditions: 2 MPa of syngas, 1:1 (H₂/CO) substrate/catalyst molar ratio 1000:1, and 60 °C. The linear selectivity was up to 98%, and in most cases was about 80%, with no hydrogenation product formation observed, which could be a potential way to synthesize 1,3-propanediol. A mechanism study including density functional theory computational analysis showed that both Rh–H and CO insertion steps in the hydroformylation of vinyl ether were linear-preferred in our catalyst system.     

The synthesis,structure and reactivity of new tetra- and pentacoordinated rhodium(I) complexes

Summary Tetracoordinated complexes of the [Rh{P(OPh)₃}₃X] type (X=N₃, NO₂ or NCS) were obtained in the reaction of [Rh{P(OPh)₃}₃Cl] with NaX. Pentacoordinated [Rh{P(OPh)₃}₄X] complexes (X=HSO₄, H₂PO₄, MeCO₂, HCO₂ or ClO₄) were prepared by treating [Rh{P(OPh)₃}₃ {P(OC₆H₄)(OPh)₂}] or [Rh(acac) {P(OPh)₃}₂]+P(OPh)₃ (Hacac=acetylacetone) with acids HX.The groups of complex differ in reactivity towards CO and H₂; [Rh{P(OPh)₃}₃X] complexes do not react with dihydrogen and with CO they produce [Rh{P(OPh)₃}₂(CO)X]. The [Rh{P(OPh)₃}₄X] complexes take up H₂ reversibly, and with CO they give [Rh{P(OPh)₃}₃(CO)₂X] compounds.     

Rhodium(I) and Rhodium(III) complexes containing the chiral ligand 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox): an unprecedented monohapto coordination of pybox

The complex [Rh(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (1) has been prepared by reaction of the precursor [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox), CO, and NaPF(6). Complex 1 reacts with monodentate phosphines to give the complexes [Rh(kappa(1)-N-pybox)(CO)(PR(3))(2)][PF(6)] (R(3) = MePh(2) (2), Me(2)Ph (3), (C(3)H(5))Ph(2) (4)), which show a previously unseen monodentate coordination of pybox. Complex 1 undergoes oxidative addition reactions with iodine and CH(3)I leading to the complexes [RhI(R)(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (R = I (5); R = CH(3) (6)). Furthermore, a new allenyl Rh(III)-pybox complex of formula [Rh(CH=C=CH(2))Cl(2)(kappa(3)-N,N,N-pybox)] (7) has been synthesized by a one-pot reaction from [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), pybox, and an equimolar amount of propargyl chloride.     

The first acetimine gold(I) and gold(III) complexes and the first acetonine complexes

Ketimino(phosphino)gold(I) complexes of the type [Au[NR=C(Me)R']L]X (X = ClO4, R = H, L = PPh3, R'=Me (la), Et (2a); L=PAr3 (Ar=C6H4OMe-4), R'=Me (1b), Et (2b); L=PPh3, R=R'=Me (3); X= CF3SO3 (OTf), L=PPh3, R=R'=Me (3'); R=Ar, R'=Me (4)) have been prepared from [Au(acac)L] (acac = acetyl acetonate) and ammonium salts [RNH3]X dissolved in the appropriate ketone MeC(O)R'. Complexes [Au(NH=CMe2)2]X (X = C1O4 (6), OTf (6')) were obtained from solutions of [Au(NH3)2]X in acetone. The reaction of 6 with PPN[AuCl2] or with PhICl2 gave [AuCl(NH=CMe2)] (7) or [AuCI2(NH=CMe2)2]ClO4 (8), respectively. Complex 7 was oxidized with PhICl2 to give [AuCl3(NH=CMe2)] (9). The reaction of [AuCl(tht)] (tht = tetrahydrothiophene), NaClO4, and ammonia in acetone gave [Au(acetonine)2]ClO4 (10) (acetonine = 2,2,4,4,6-pentamethyl-2,3,4,5-tetrahydropyrimidine) which reacted with PPh3 or with PPN[AuCl2] to give [Au(PPh3)(acetonine)]ClO4 (11) or [AuCl(acetonine)] (12), respectively. Complex 11 reacts with [Au(PPh3)(Me2CO)]ClO4 to give [(AuPPh3)2(mu-acetonine)](ClO4)2 (13). The reaction of AgClO4 with acetonine gave [Ag(acetonine)(OClO3)] (14). The crystal structures of [Au(NH2Ar)(PPh3)]OTf (5), 6' and 10 have been determined.     

The reaction of mixtures of [Rh4(CO)12] and triphenylphosphite with carbon monoxide or syngas as studied by high-resolution, high-pressure NMR spectroscopy

The fragmentation and redistribution reactions of [Rh4(CO)12-x{P(OPh)3}x] (x = 1-4) with carbon monoxide have been studied using high-resolution, high-pressure NMR spectroscopy. Under the conditions of efficient gas mixing in a high-pressure NMR bubble column, [Rh4(CO)9{P(OPh)3}3] fragments to give mainly [Rh2(CO)6{P(OPh)3}2]; [Rh4(CO)11{P(OPh)3}] is also observed,implying redistribution of the phosphite ligand and/or recombination of the dimers to tetrameric clusters. Fragmentation of[Rh4(CO)10{P(OPh)3}2] is found to be pressure-dependent giving predominantly [Rh2(CO)6{P(OPh)3}2] at low CO pressure (1-40 bar), and increasing amounts of [Rh2(CO)7{P(OPh)3}] at higher (40-80 bar) pressure. Using Syngas (CO : H2 (1 : 1)) instead of CO in the above fragmentations, homolytic addition of H2 to the dimer [Rh2(CO)6{P(OPh)3}2] to give [RhH(CO)3{P(OPh3}] and [RhH(CO)2{P(OPh)3}2] is observed. The distribution of tetrameric species obtained is similar to that obtained under the same partial pressure of CO. On depressurisation/out-gassing of the sample, the original mixture of tetrameric clusters is obtained.     

New iridacyclohexadienes and iridabenzenes by [2+2+1] cyclotrimerization of alkynes and facile interconversion between iridacyclohexadienes and iridabenzenes

Iridabenzenes [Ir[=CHCH=CHCH=C(CH2R)](CH3CN)2(PPh3)2]2+ (R=Ph 4 a, R=p-C6H4CH3 4 b) are obtained from the reactions of H+ with iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](CO)(PPh3)2]+ (R'=H 3 a, R'=CH3 3 b), which are prepared from [2+2+1] cyclotrimerization of alkynes in the reactions of [Ir(CH3CN)(CO)(PPh3)2]+ with HC[triple chemical bond]CH and HC[triple chemical bond]CR. Iridabenzenes 4 react with CO and CH3CN in the presence of NEt3 to give iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CHR)](CO)2(PPh3)2]+ (6) and [Ir[-CH=CHCH=CHC(=CHR)](CH3CN)2(PPh3)2]+ (7), respectively. Iridacyclohexadienes 6 and 7 also convert to iridabenzenes 4 by the reactions with H+ in the presence of CH3CN. Alkynyl iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-C[triple chemical bond]CH)(PPh3)2] (8) undergo a cleavage of C[triple chemical bond]C bond by H+/H2O to produce [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-CH3)(CO)(PPh3)2] (10) via facile inter-conversion between iridacyclohexadienes and iridabenzenes.