基于对偶数理论的资料同化新方法

针对变分资料同化中目标泛函梯度计算精度不高且复杂等问题, 提出了一种基于对偶数理论的资料同化新方法, 主要优点是: 能避免复杂的伴随模式开发及其逆向积分, 只需在对偶数空间通过正向积分就能同时计算出目标泛函和梯度向量的值. 首先利用对偶数理论把梯度分析过程转换为对偶数空间中目标泛函计算过程, 简单、高效和高精度地获得梯度向量值; 其次结合典型的最优化方法, 给出了非线性物理系统资料同化问题的新求解算法; 最后对Lorenz 63混沌系统、包含开关的不可微物理模型和抛物型偏微分方程分别进行了资料同化数值实验, 结果表明: 新方法能有效和准确地估计出预报模式的初始条件或物理参数值.     

确定大气边界层顶高度的新方法及数值实验

提出了一种确定大气边界层顶高度的数值微分新方法,该方法使用了正则化技术,把对弯角廓线求导数的数值微分问题转化为求目标泛函极小值的问题,采用双参数模型函数方法来选择正则化参数,最后利用最大梯度法确定边界层顶高度.首先通过两个数值实验验证了新方法的有效性,实验结果显示,随着掩星资料噪音的增多,由差分法和结合L曲线方案的数值微分方法得到的边界层顶高度波动增大,而通过双参数模型函数方法得到的高度很稳定,这说明新方法能够很好地过滤噪音,从而保留廓线的主要信息.随后基于2007-2011年1,4,7,10月的COSMIC弯角数据,利用新方法分析了全球海洋大气边界层顶高度的季节特征,并与用掩星资料自带的大气边界层顶高度数据zbalmax得到的季节分布进行对比.结果表明,两者的季节分布特征十分一致:海温相对周围海域高的区域,边界层顶高度较高,反之,边界层顶高度较低;在暖流经过的海域,边界层顶高度较高,在寒流经过的海域,边界层顶的高度相对较低.     

二维有耗色散介质的时域逆散射方法

为了重建二维有耗色散介质的电参数分布,基于Debye模型,应用泛函分析和变分法,提出一种时域逆散射新方法.该方法首先以最小二乘准则构造目标函数,将逆问题表示为约束最小化问题,接着应用罚函数法转化为无约束最小化问题,然后基于变分计算导出闭式的Lagrange函数关于特征参数的Fréchet导数,最后借助梯度算法和时域有限差分法迭代反演Debye模型参数.为了对抗噪声污染和逆问题的病态特性,采用了一阶Tikhonov正则化方法.数值应用中,利用Polak-Ribière-Polyak非线性共轭梯度法,对二维乳     

梯度圆柱颗粒复合介质的有效非线性响应

应用非线性微分有效偶极近似方法,导出了关于非线性梯度圆柱颗粒的等效线性介电常数和三阶非线性极化率的微分式,研究了稀释极限下,圆柱形梯度颗粒无规置入线性介质中组成的复合介质的有效线性介电常数和三阶非线性极化率.作为应用,数值计算了具有幂指数梯度分布的介电常数的颗粒复合介质的有效非线性响应,及梯度金属电介质颗粒复合介质的表面plasmon共振效应.     

基于区域逐步分析的集合变分资料同化方法

集合变分数据同化方法的同化效果对集合样本容量具有很强的依赖性,研究发现此问题的出现是因为其计算过程中分析增量被表示为集合扰动向量或其展开正交基向量的线性组合.这样的处理方法虽然避免了计算梯度而引入伴随模式,但是因为物理控制变量个数远大于集合样本容量,就会导致物理量的同化分析值对集合样本容量很敏感.根据此原因,提出了区域逐步分析方法,减小了同化分析区域内物理变量个数与集合样本容量数之间的比值,使问题得到解决.利用浅水方程模式进行资料同化数值试验表明,基于区域逐步分析的集合变分资料同化方法可以得到较好的结果,能明显提高同化的精度.     

厄尔尼诺和南方涛动海气耦合模型中参数估计的变分方法

提出一种基于变分原理估计厄尔尼诺和南方涛动海气耦合模型中未知参数的方法. 首先将所研究的非线性海气耦合动力方程引入到目标泛函中; 接着利用变分方法导出伴随方程和待辨识参数泛函梯度的公式; 然后设计了估计未知参数的算法.数值试验结果表明变分方法是一 种能有效估计海气耦合非线性系统未知参数的方法.     

三维声波方程逆问题的共轭梯度法求解

考虑一个完整的三维声波方程的逆问题.通过构造一个表面声压偏差平方和形式的目标泛函,把声波方程的逆问题转化为一个控制声学特性参数分布使得目标泛函达到最小伍的优化问题.采用共轭梯度法来求解这个优化问题.通过引入一个对偶函数u(x,t),文中用微扰法求得了目标泛函梯度值的解析表达式,从而克服了以往用共轭梯度法求解偏微分方程控制的优化问题时计算目标活函梯度的困难,大大压缩了共轭梯度法计算目标泛函梯度的时间,而且提高了梯度值的计算精度.还进一步进行了反演声学特性参数三维分布的数值仿真计算.共轭梯度法完整解决了三维声波方程的逆问题.     

基于二阶离散变分方法的非线性映射参数估计

提出一种估计非线性映射未知参数的二阶离散变分方法.首先针对非线性离散混沌系统, 利用变分方法导出了伴随方程和目标泛函梯度, 以此为基础利用二阶离散变分方法给出了二阶伴随方程和精确计算Hessian矩阵-向量乘积的显式表达式; 其次设计了估计非线性映射未知参数的新算法, 并以此对Hyperhenón映射和二维抛物映射中的未知参数进行了精确的估计. 数值仿真结果表明了该方法的有效性和优点. 关键词： 非线性映射 参数估计 二阶离散变分方法 伴随方程     

梯度计算的集合变分方案及其在大气Ekman层湍流系数反演中的应用

大气Ekman层湍流系数的准确计算对数值天气预报和污染物扩散计算有着重要的意义. 将集合计算和变分法结合起来, 提出了目标泛函梯度计算的集合变分方案, 并根据正演模式的线性化情况提出了两种计算流程. 利用这种集合变分梯度算法及两种流程对Ekman层湍流系数进行了反演试验, 结果表明这种算法实施简单、方便, 根据观测资料能够比较准确地反演湍流系数值. 关键词： 梯度计算 集合变分 湍流系数 反演     

基于微分几何理论的参数失配系统时空同步研究

本文采用状态反馈精确线性化方法,实现了参数失配系统的时空同步控制. 引入微分几何理论,首先采用李导数判定了参数失配系统的仿射模型是否满足状态精确线性化的充要条件,通过非线性坐标变换得到了其线性解耦系统,并结合线性最优控制理论确定了同步控制律,数值仿真证实了该控制方法的有效性,从非线性控制角度探索了混沌系统时空同步的新方法. 关键词： 时空同步 微分几何 精确线性化 参数失配     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.