Structure of Zn<Subscript>3</Subscript>P<Subscript>2</Subscript>

The structure of Z_n3P₂ (P 4₂/nmc, a = b = 8. 0785 Å, c = 11. 3966 Å) was solved and refined to R = 3. 2% in a precision X-ray diffraction experiment (λ-MoK _a, graphite monochromator on a primary beam, 27,496 reflections) . Interatomic distances and bond angles have been determined. The fcc lattice of the structure is built from phosphorus atoms, and the zinc atoms occupy 3/4 of all tetrahedral voids; the structure is described by two equivalent models where 1/4 occupied (by zinc atoms) and 1/4 vacant voids change places. The zinc atoms that occupy the voids following the diamond principle do not change places.Original Russian Text Copyright © 2004 by I. E. Zanin, K. B. Aleinikova, M. M. Afanasiev, and M. Yu. Antipin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 889–892, September–October, 2004.     

Electrochemical deposition of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> for thermoelectric microdevices

The electrolyses of solutions of bismuth oxide and tellurium oxide in nitric acid with molar ratios of Bi:Te=3:3–4:3 lead to cathodic deposits of films of bismuth telluride (Bi₂Te₃), an n-type semiconductor. Current densities of 2–5 mA/cm² were applied. Voltammetric investigations showed that Bi₂Te₃ deposition occurred at potentials more negative than −0.125 V (Ag/AgCl, 3 M KCl). The deposit was identified as bismuth telluride (γ-phase) by X-ray analysis. Hall-effect measurements verified the n-type semiconducting behaviour. The films can be deposited in microstructures for thermoelectric microdevices like thermoelectric batteries or thermoelectric sensors.     

New Hybrid Material: (C<Subscript>3</Subscript>H<Subscript>6</Subscript>N<Subscript>3</Subscript>)<Subscript>4</Subscript>Bi<Subscript>2</Subscript>Cl<Subscript>10</Subscript>. Synthesis,Structural Study and Spectroscopic Behavior

The structure of (C₃H₆N₃)₄Bi₂Cl₁₀ was determined by single crystal X-ray diffraction at room temperature. It crystallizes in the orthorhombic space group Pcmn, with a = 9.430 (1) Å, b = 17.426 (3) Å, c = 19.883(5) Å, V = 3267.3 (11) ų and Z = 4. The structure consists of discrete binuclear [Bi₂Cl₁₀]^4– anions and 3-aminopyrazolium cations. The crystal packing is governed by weak N–H···Cl hydrogen bonds, π–π and electrostatic Cl···Cl interactions. Infrared spectrum is used to gain more information on the title compound. An assignment of the observed vibration modes is reported. The crystal morphology is studied using the BFDH laws. The calculated HOMO and LUMO energies show that charge transfer occur within organic and inorganic molecules. The optical absorption of the zero-dimensional hybrid was also investigated.     

Bismuth aluminoborate Bi<Subscript>0.96</Subscript>Al<Subscript>2.37</Subscript>(B<Subscript>4</Subscript>O<Subscript>10</Subscript>)O: Synthesis and crystal structure

The crystal structure of a new bismuth aluminoborate Bi_0.96Al_2.37(B₄O₁₀)O is studied by single-crystal X-ray diffraction. The Bi_0.96Al_2.37(B₄O₁₀)O single crystals are hexagonal (space group \(P\bar 6\) 2m). The unit cell parameters are as follows: a = b = 4.587(4) Å, c = 2.253(9) Å, α = β = 90°, γ = 120°, V = 168.60 ų, Z = 1.     

Microstructure and Conduction of Composites Bi<Subscript>2</Subscript>CuO<Subscript>4</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> Near the Eutectic Melting Point

Microstructure and conduction of ceramic composites Bi₂CuO₄ + xBi₂O₃ (x = 5, 10, 15, 20 wt %) near the eutectic melting point (770°C) are studied. Bismuth oxide, initially randomly distributed over the ceramics bulk, after quenching from temperatures exceeding the eutectic melting point, becomes localized at triple junctions and grain boundaries in Bi₂CuO₄, which is caused by wetting grain boundaries and forming a liquid-channel structure. The jumpwise change in the composites’ conductivity near 730 and 770°C caused by polymorphic transformation of Bi₂O₃ and the eutectic melting with simultaneous formation of a liquid-channel structure. Transport numbers of the oxygen ion are measured at 770°C by coulomb-volumetric method. The conduction by oxygen ions increases in the composites with decreasing average size of Bi₂CuO₄ crystallites.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 596–601.Original Russian Text Copyright © 2005 by Lyskov, Metlin, Belousov, Tret’yakov.     

A Strong Luminescent Quaternary Dimeric Complex [Tb(BAA)<Subscript>2</Subscript>(Phen)(NO<Subscript>3</Subscript>)]<Subscript>2</Subscript>: Hydrothermal Synthesis,Structure, and Photophysics

In terms of the molecular fragment principle, a quaternary complex is assembled under hydrothermal conditions and characterized as [Tb(BAA)₂(Phen)(NO₃)]₂ (BAA is benzoyl acetic acid, Phen is 1,10- phenanthroline) by elementary analysis and IR, UV, fluorescence excitation, and emission spectra. The X-ray single-crystal diffraction data indicate that the title complex crystallizes in triclinic system, space group , with unit cell parameters a = 8.953(6), b = 13.332(9), c = 13.431(9) Å, α = 60.669(7)°, β = 89.649(8)°, γ = 72.068(9)°, V = 1309.3(15) ų, ρ(calcd) = ∼ 1.703 g/cm³, Z = 1 (per dimeric unit), F(000) = 664, GOOF = 1.071, R ₁ = 0.0627. The terbium complex forms a dimer with a coordination number of nine in which each pair of adjacent terbium ions is bridged by four BAA groups via two types of coordination modes. The dimer exhibits strong green luminescence of Tb³⁺.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 6, 2005, pp. 472–478.Original English Text Copyright © 2005 by Bai, Yan, Chen.     

Thermal analysis study of Bi<Subscript>2</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3-x</Subscript>Er<Subscript>x</Subscript>O<Subscript>10+δ</Subscript> glass-ceramic system

Summary We have fabricated glasses in the Bi-2223 HT_c superconductor system with Bi₂Sr₂Ca₂Cu_3-xEr_xO_{10+ δ} nominal composition, where x=0.5 and 1.0, by the glass-ceramic technique. Using an analysis developed for non-isothermal crystallization studies, information on some aspects of crystallization temperature and thermal properties has been obtained. The crystallization studies were made using DTA with several uniform rates. The calculations of crystallization activation energies, E_a, and the Avrami parameters, n, were made based on the non-isothermal kinetic theory of Kissinger and the Ozawa’s equations. The DTA data of the samples showed that the first crystallization temperature, T_x1, increases and the second crystallization temperature, T_x2, decreases by increasing the Er concentration. This suggests that the Er substitution had significant effect on the glassification of the BSCCO material due to change on the surface nucleation and increased ionic activities at high temperature region. The activation energy for crystallization, E_a, of the samples was also showed an increase at high Er concentration case. However, the Avrami parameter, n, decreased from 2.5 to 1.7 for x=0.5 and 1.0 samples, respectively. This suggests that the growth mechanism is diffusion-controlled and three-dimensional parabolic growth takes place near the first crystallization temperature. The oxidization rates and the activation barrier for oxygen out-diffusion process, E, was calculated using the TG data. It was found that the total mass gain in the x=0.5 sample is comparably smaller than that of the x=1.0 sample. This shows that the oxygen absorption of the x=1.0 sample is faster than the x=0.5 sample, leading to increase in the oxidization rate in the x=1.0 material.     

Thermal analysis of doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

New environmentally inorganic pigments based on Bi₂O₃ doped by metal ions, such as Zr⁴⁺ and Dy³⁺ have been developed and characterized using the methods thermal analysis, X-ray powder diffraction, and spectral reflectance data. The compounds having formula Bi_2−x Dy _x/2Zr_3x/8O₃ (x = 0.2, 0.6, 1.0, and 1.2) were prepared by the solid state reaction. Methods of thermal analysis were used for determination of the temperature region of the pigment formation and thermal stability of compounds. The incorporation of doped ions in Bi₂O₃ changes the color from yellow to orange and also contributes to a growth of their thermal stability. This property gives a direction for coloring ceramic glazes.     

New uranyl complex with imidazolidine-2-one [UO<Subscript>2</Subscript>(Imon)<Subscript>4</Subscript>(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>2</Subscript>: Structure and some properties

A complex of uranyl perchlorate with imidazolidine-2-one as the molecular ligand, [UO₂(Imon)₄(H₂O)](ClO₄)₂ (I), was synthesized and structurally characterized by X-ray diffraction analysis. The coordination number of the uranium atom is 7. The nearest environment of the uranyl ion includes four O atoms of the imidazolidine-2-one molecules and one O atom of the water molecule. The perchlorate anions are outer-sphere ligands. The crystals are monoclinic: space group P2₁/c; a = 16.294(3) Å, b = 16.135(3) Å, c = 9.987(2) Å, = 97.69 (3)°, V = 2603.0 (9) ų, (calcd) = 2.117 g/cm³, Z = 4. The IR and luminescence spectra of the complex were recorded.Translated from Koordinatsionnaya Khimiya, Vol. 30, No. 12, 2004, pp. 919–924.Original Russian Text Copyright © 2004 by Andreev, Antipin, Budantseva, Tuchina, Serezhkina, Fedoseev, Yusov.     

Crystal Structure of a New Modification of <Emphasis Type="Italic">cis</Emphasis>-Bis(pivalyltrifluoroacetonato)copper(II)

Powder and single-crystal X-ray diffraction study of cis-bis(pivalyltrifluoro-acetonato)copper(II) has been performed (Bruker AXS P4 automatic diffractometer, MoK _β radiation, t = −25°C). Crystal data for C₁₆H₂₀CuF₆O₄: a= 9.980(7) Å, b = 19.236(13) Å, c = 20. 771(14) Å, space group Pbca, V = 3987(5) ų, Z = 8, d _calc = 1.512 g/cm³. The square-planar environment of the Cu atom (Cu-O_av 1.904 Å, =O-Cu-O_av 92.4°) is completed to bipyramidal by the atoms of the neighboring molecules, Cu...F 2.78 Å and Cu...C_γ 3.30 Å. The complex forms centrosymmetric pseudo dimers with Cu...Cu distances of 4.59 Å.Original Russian Text Copyright © 2004 by S. A. Gromilov, I. A. Baidina, P. A. Stabnikov, and G. V. Romanenko__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 893–898, September–October, 2004.     

Phase equilibria in the CdI<Subscript>2</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The phase diagram of the system CdI₂-Bi₂O₃ is studied by means of X-ray diffraction, differential thermal analysis and measurements of the density of the material. As a result of the synthetic and peritectic interactions, two incongruently melting intermediate phases i.e. phase A — CdI₂·2Bi₂O₃ and phase B — CdI₂·4Bi₂O₃ (stable in the temperature interval 370–850°C) are formed.The phase A exists in two polymorphic forms with a temperature of the phase transition T =320–370°C. The unit cell parameters at low temperature modification of -CdI₂°2Bi₂O₃ were determined. (a=1.032 nm, b=1.046 nm, c=1.046 nm, =115.02°, =109.11° and =82.04°). The phases A and B have fields of homogeneity.The authors acknowledge thankfully the financial support for this work from the Ministry of Education and Science (Fond Scientific investigations — contract TN-1102).     

Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> powders by the complex polymerization method: synthesis,characterization and morphology

Lanthanum-modified bismuth titanate (Bi_3.25La_0.75Ti₃O₁₂, BLTO) powders were prepared by the complex polymerization method. The structure and morphology of BLTO powders were investigated by X-ray diffraction and scanning electron microscopy. The complexation of citric acid with the metallic cations was detected by Fourier transformed infrared (FT-IR). The thermal analyses of obtained gels were investigated by differential thermal gravimetric (DTG). The pure and normally stoichiometric phase of BLTO powders could be obtained at relatively low temperature of 550–700 °C even if the bismuth content is not excess in the starting precursors, while the secondary phase could be detected at lower and higher calcination temperatures. The shape of the BLTO grains is similarly to platelet in Bi-layer structure and stoichiometry BLTO was detected by the analysis of energy dispersive spectrometry.     

Structure and properties of Ce<Subscript>3</Subscript>Pd<Subscript>3</Subscript>Bi<Subscript>4</Subscript>, CePdBi,and CePd<Subscript>2</Subscript>Zn<Subscript>3</Subscript>

The intermetallic cerium compounds Ce₃-Pd₃Bi₄, CePdBi, and CePd₂Zn₃ were synthesized from the elements in sealed tantalum ampoules in an induction furnace. The compounds were characterized by X-ray powder and single crystal diffraction: CeCo₃B₂ type (ordered version of CaCu₅), P6/mmm, a = 538.4(4), c = 427.7(4) pm, wR2 = 0.0540, 115 F ² values, 9 variables for CePd₂Zn₃ and Y₃Au₃Sb₄ type, I \({\bar 4}\)3d, a = 1005.2(2) pm, w R2 = 0.0402, 264 F ² values, 9 variables for Ce₃Pd₃Bi₄, and MgAgAs type, a = 681.8(1) pm for CePdBi. The bismuthide structures are build up from three-dimensional networks of corner-sharing PdBi₄ tetrahedra with Pd–Bi distances of 281 (Ce₃Pd₃Bi₄) and 296?pm (CePdBi), respectively. The cerium atoms are located in larger voids of coordination number 12 (Ce₃Pd₃Bi₄) and 10 (CePdBi). In CePd₂Zn₃ the cerium atoms fill larger channels within the three-dimensional [Pd₂Zn₃] network with 18 (6 Pd + 12 Zn) nearest neighbors. The three compounds contain stable trivalent cerium with experimental magnetic moments of μ_eff = 2.70(2), 2.48(1), and 2.49(1) μ_B/Ce atom for CePd₂Zn₃, Ce₃Pd₃Bi₄, and CePdBi, respectively. Susceptibility and specific heat data gave no hint for magnetic ordering down to 2.1?K.     

Investigation of synthesis and microstructure of bismuth titanates with TiO<Subscript>2</Subscript> rich compositions

Preliminary examinations regarding formation of bismuth titanates in a part of Bi₂O₃—TiO₂ system rich with TiO₂ have been carried out. Bismuth titanates have been synthesized from mixtures of Bi₂O₃ and TiO₂ (anatase) by the conventional solid-state method at the temperatures ranged from 1273 to 1473 K. Differential thermal analysis (DTA), powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) have been used to study the formation of bismuth titanates. The following compounds have been achieved: Bi₄Ti₃O₁₂, Bi₂Ti₂O₇ and Bi₂Ti₄O₁₁. Existence of controversial bismuth titanate of formula Bi₂Ti₃O₉ in the Bi₂O₃—TiO₂ system has not been confirmed.     

Preparation and electrical properties of Nd and Mn co-doped Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> thin films

Ferroelectric thin films of Nd and Mn co-doped bismuth titanate, Bi_3.15Nd_0.85Ti_3−x Mn _x O₁₂ (BNTM) (x = 0–0.1), were fabricated on Pt/TiO₂/SiO₂/Si(100) substrates by a sol–gel technique. The BNTM films had a polycrystalline perovskite structure and uniform and dense surface morphologies. A lattice distortion was observed in the BNTM films due to Mn ion doping. The ferroelectric measurement of the films indicated that the values of coercive field (E _c ) decreased gradually with the increase of the Mn content (x), however, the remanent polarization (P _r ) increase firstly and then decrease with the increase of x. The sample with x = 0.05 had optimum electrical properties and a maximum 2P _r value. The 2P _r and 2E _c values of the film at a maximum applied electric field of 400 kV/cm were 38.3 μC/cm² and 180 kV/cm, respectively. Moreover, this BNTM capacitors did not show fatigue behaviors after 1.0 × 10¹⁰ switching cycles at a frequency of 1 MHz, suggesting a fatigue-free character. The main reason for the increase of the 2P _r and the decrease of the 2E _c might be attributed to the lattice distortion in BNTM films due to Mn ion doping.     

Synthesis and Structure of the Copper(II) Complex with <Emphasis Type="Italic">ortho</Emphasis>-Phthalic Acid and 1-Methylimidazole [Cu(HPht)<Subscript>2</Subscript>(1-CH<Subscript>3</Subscript>Im)<Subscript>2</Subscript>]

A new Cu(II) complex [Cu(HPht)₂(1-CH₃Im)₂] (I), where HPht is the monoanion of o-phthalic acid and 1-CH₃Im is 1-methylimidazole, is synthesized and characterized by IR spectroscopy, thermogravimetry, and X-ray diffraction analysis. Compound I contains molecular complexes in which the o-phthalic acid residue is monodeprotonated and linked to a metal through the carboxyl group in a 1,3-chelate mode. The cis-octahedral coordination of copper is formed by two HPht residues and two 1-CH₃Im molecules. The distances are Cu-N1.945(6) Å, Cu-O2.018(5) Å and 2.374(6) Å. Polymeric chains are formed in complex I due to intermolecular hydrogen bonds. The chains are unified into layers by the interactions between the 1-CH₃Im molecules of the adjacent complexes.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 8, 2005, pp. 630–635.Original Russian Text Copyright © 2005 by Gherco.     

Crystal structure of Ba(VUO<Subscript>6</Subscript>)<Subscript>2</Subscript>

The crystal structure of Ba(VUO₆)₂ was determined by X-ray diffraction at 243 K: monoclinic crystal system, space group P2₁/c, unit cell parameters a=6.4992(6) Å, b=8.3803(8) Å, c=10.4235(9) Å, =104.749(2) °, Z=2. The structure contains close-packed [VUO₆] ₂ ^- layers formed by the dimers of the flattened U₂O₁₂ pentagonal bipyramids and by the dimers of V₂O₈ square pyramids. The neighboring layers are bound by the statistically distributed barium atoms.Original Russian Text Copyright © 2004 by E. V. Alekseev, E. V. Suleimanov, E. V. Chuprunov, and G. K. FukinTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 544–548, May–June 2004.     

Structural characterization and photocatalytic properties of novel Bi<Subscript>2</Subscript>FeVO<Subscript>7</Subscript>

Bi₂FeVO₇ was prepared by a solid-state reaction technique for the first time and the structural and photocatalytic properties of Bi₂FeVO₇ were studied. The results shows that this compound crystallized in the tetragonal crystal system with space group I4/mmm. Moreover, the band gap of Bi₂FeVO₇ was estimated to be about 2.22(6) eV. For the photocatalytic water splitting reaction, H₂ or O₂ evolution was observed from pure water with Bi₂FeVO₇ as the photocatalyst by ultraviolet light irradiation. Degradation of aqueous methylene blue (MB) dye by photocatalytic way over this compound was further studied under visible light irradiation. Bi₂FeVO₇ shows higher catalytic activity compared to TiO₂ (P-25) for MB photocatalytic degradation under visible light irradiation. Complete removal of aqueous MB was realized after visible light irradiation for 170 min with Bi₂FeVO₇ as the photocatalyst. The reduction of the total organic carbon (TOC) and the formation of inorganic products, SO ₄ ²⁻ and NO ₃ ⁻ revealed the continuous mineralization of aqueous MB during the photocatalytic course.     

Advanced Bi<Subscript>2</Subscript>O<Subscript>2.7</Subscript>/Bi<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript> composite film with enhanced visible-light-driven activity for the degradation of organic dyes

Bi₂O_2.7/Bi₂Ti₂O₇ composite photocatalyst films are synthesized by sol–gel dip-coating. The ratio of adding Bi and Ti precursors can be controlled during the preparation process. The phase structure is confirmed by X-ray diffraction. The UV–visible diffuse reflectance spectrum shows that the composite catalysts present light absorption in the visible region. The obtained Bi₂O_2.7/Bi₂Ti₂O₇ composite films possess superior photocatalytic degradation of rhodamine B, owing to the visible light response of Bi₂O_2.7 and the separation of photogenerated electrons and holes between the two components. As a result, the Bi₂O_2.7/Bi₂Ti₂O₇ (Bi/Ti = 1:1) displays the highest photocatalytic activity under visible light or UV light irradiation for the degradation of different organic dyes, including methyl blue, methyl orange and acid orange 7.     

Synthesis,characterization and very strong luminescence of a new 3 D europium sulfate Eu<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>

A new 3 D europium sulfate Eu₂(H₂O)₄(SO₄)₃ 1 is synthesized solvothermally and characterized by single crystal X-ray diffraction, IR spectrum, TG, powder XRD, and ultraviolet excitation and emission spectrum. This compound crystallizes in the triclinic system with the space group P-1, a = 6.7520(9) Å, b = 9.1077(12) Å, c = 10.5910(14) Å, α = 94.432(2)°, β = 107.1170(10)°, γ = 99.160(2)°, V = 609.17(14) ų, Z = 2. The open framework of the title compound is an eight-membered ring channel along the crystallographic a-axis, which is built up by EuO₈ polyhedra and SO₄ tetrahedra.