Investigation on poly[(methylsilylene ethynylene phenylene ethynylene)-co-(tetramethyldisiloxane ethynylene phenylene ethynylene)]

<正>Poly[(methylsilylene ethynylene phenylene ethynylene)-co-(tetramethyldisiloxane ethynylene phenylene ethynylene)]was synthesized by polycondensation reaction of m-diethynylbenzene magnesium reagent with 1,3-dichlorotetramethyldisiloxane and dichloromethylsilane.The copolymer was characterized by FT-IR,~1H NMR,differential scanning calorimetry and thermogravimetric analysis.The results show that the copolymer exhibits good processability and cures at low temperatures.The cured copolymer shows high thermal stability.     

Self-assembly of amphiphilic poly(phenylene ethynylene)s in water-potassium dodecanoate-decanol lyotropic liquid crystals

Poly(phenylene ethynylene)s bearing a high density of branched amphiphilic side-chains self-assemble at the air-water interface and in water-potassium dodecanoate-decanol lyotropic liquid crystals.     

Cyclodextrin-grafted poly(phenylene ethynylene) with chemically-responsive properties

Water-soluble poly(phenylene ethynylene) carrying beta-cyclodextrin was prepared; the polymer exhibited a fluorescence color change or quenching, depending on the kind of guest.     

Synthesis and characterization of amphiphilic phenylene ethynylene oligomers and their Langmuir-Blodgett films

We report the synthesis of a series of amphiphilic molecular building blocks that can be self-assembled at the air-water interface to form two- and three-dimensional nanostructures with tunable optoelectronic properties. Compression of these molecular building blocks using the Langmuir-Blodgett method gives rise to monolayer and multilayer thin films with different packing densities and electronic properties that are tunable due to varying pi-pi (hydrophobic) interactions. Depending on the noncovalent interaction between chromophores, we observe a transition toward denser packing with increasing number of phenylene ethynylene repeat units. Additionally, we use quantum-chemical simulations to help determine the excited-state electronic structure, intermolecular interactions, and packing trends. Our results demonstrate that the interplay between dipole-dipole and pi-pi interactions dominates the formation of thin films with various packing densities and determines the associated optical properties.     

pH-dependent optical properties of a poly(phenylene ethynylene) conjugated polyampholyte

A poly(phenylene ethynylene) conjugated polymer (PPE-NMe(3)(+)-COO(-)) containing tetraalkylammonium groups and carboxylate groups has been synthesized by Sonogashira coupling. Due to the presence of the strong cationic and weak anionic pendant units, the polymer undergoes a pH-induced transition from cationic polyelectrolyte to polyampholyte due to deprotonation of the carboxylic acid units in basic solution. Studies of the pH dependence of the polymers' optical properties reveal changes in absorption oscillator strength and fluorescence quantum efficiency that are triggered by the transition from cationic polyelectrolyte to polyampholyte nature. Stern-Volmer fluorescence quenching of PPE-NMe(3)(+)-COO(-) with a negatively charged quencher 1,4,5,8-naphthalenediimide-N,N-bis(methylsulfonate) (NDS) shows that the polymer fluorescence quenching is amplified at low pH where the polymer is a polycation, whereas the quenching efficiency is considerably less at high pH.     

Synthesis of amphiphilic poly(para‐phenylene)s by Suzuki polycondensation

1,4‐Dibromobenzenes carrying nonpolar hexoxy and polar oligo(ethylene glycol) side chains were subjected to Suzuki polycondensation with a benzene‐1,4‐bisboronic acid ester to produce high‐molar‐mass poly(para‐phenylene)s. The molar masses were determined with size exclusion chromatography with conventional polystyrene and universal calibration. These novel amphiphilically equipped rigid‐rod polymers have the potential to segregate lengthwise into polar and nonpolar domains, a property that has only rarely been described, and promise to exhibit novel interesting supramolecular properties. The oligo(ethylene gylcol) side chains terminate with a silyl‐protected alcohol group, and its deprotection on the polymer was proven to proceed quantitatively. This not only led to a further polarity increase but allows us to attach even more polar (e.g., charged) units in future projects. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2879–2889, 2003     

Photophysics,aggregation and amplified quenching of a water-soluble poly(phenylene ethynylene)

The fluorescence, absorption and fluorescence quenching properties of an anionic poly(phenylene ethynylene) are investigated in H2O and MeOH solutions.     

Luminescent core-shell photonic crystals from poly(phenylene ethynylene) coated silica spheres

We describe the preparation and characterization of a photonic crystal filled with a luminescent conjugated polyelectrolyte, sulfonated poly(phenylene ethynylene). The conjugated polymer was coated onto the nanospheres by the layer-by-layer method and assembled directly into a fluorescent opal structure avoiding the defects associated with post-filling schemes. These structures exhibit strong angle-dependent luminescent properties. By using multiple layers, we further demonstrate control over the emissive bands of the opal.     

Capture and detection of a quencher labeled oligonucleotide by poly(phenylene ethynylene) particles

Fluorescence quenching of poly(phenylene ethynylene) (PPE) particles by a Cy-5 labeled oligonucleotide is 2 orders of magnitude more sensitive than direct excitation of the Cy-5 fluorophore.     

Synthesis and application of poly(phenylene ethynylene)s for bioconjugation: a conjugated polymer-based fluorogenic probe for proteases

A set of carboxylate-functionalized poly(phenylene ethynylene)s (PPEs) has been synthesized in which the carboxylic acid groups are separated from the polymer backbone by oligo(ethylene glycol) spacer units. These polymers are soluble in water and organic solvents and have photophysical properties that are sensitive to solvent conditions, with high salt content and the absence of surfactant promoting the formation of aggregates of relatively low quantum yield and long fluorescence lifetime. Quenching of these materials by the dinitrophenyl (DNP) chromophore (K(SV) approximately 10(4)) is also highly solvent-dependent. The presence of carboxylate groups far from the polymer backbone appended to each repeating unit allows for the postpolymerization modification of these PPEs with peptides by methods analogous to those described for carboxylate-functionalized small-molecule dyes. Covalent attachment of the fluorescence-quenching 14-mer Lys(DNP)-GPLGMRGLGGGGK to the PPE results in a nonemissive substrate whose fluorescence is restored upon treatment with trypsin. The rate of fluorescence turn-on in this case is increased 3-fold by the presence of surfactant, though the actual rate of peptide hydrolysis remains the same. A small-molecule mimic of the polymer-peptide system shows a smaller fluorescence enhancement upon treatment with trypsin, illustrating the value of polymer-based amplification in this sensory scheme.     

Combinatorial synthesis of oligo(phenylene ethynylene)s

The combinatorial synthesis of oligo(phenylene ethynylene) tetramers, both in solution and on solid support, is described. These products are of interest for molecular electronics applications. An iterative sequence, coupling of aryl halides to alkynes under Sonogashira conditions, was used. Five monomers functionalized with electron-donating or electron-withdrawing groups were synthesized, and used to generate a library of 25 trimers in a solution-phase based process. A library of 24 tetramers was prepared by subsequent protodesilylation and coupling with the alligator clip 4-iodo-1-thioacetylbenzene. The solution-phase based sequence was successfully adapted to a higher yielding directed split-and-pool solid-phase process, with average yields of 78–86% for each step over seven steps. A triazene linker group was used to attach the starting monomer to the polymer beads. At the completion of the solid-phase-based process, traceless cleavage of trimers from the resin was achieved by sonication of the resin in 10% HCl/THF solution. The released products were then poised for the final step in the sequence, attachment of the alligator clip.     

Synthesis and fractionation of poly(phenylene methylene)

Poly(phenylene methylene) (PPM) was isolated in a broad range of molar masses by optimization of the catalytic polymerization of benzyl chloride with SnCl₄ or FeCl₃, followed by fractionation by Soxhlet extraction or phase separation in concentrated solutions in poor solvents. Low molar mass products were also obtained by quenching the reaction at moderate monomer conversions. Products with number average molar masses (M_n) ranging from 200 to 61,000 g mol⁻¹ were isolated, the latter being an order of magnitude above the previously reported values. DSC analysis of polymers of different molar masses revealed that the glass transition temperature follows the Flory‐Fox equation reaching a plateau value of 65 °C at a molar mass between 10,000 and 20,000 g mol⁻¹. The onset of decomposition temperature of higher molar mass products proceeds above 450 °C (maximum decomposition rate at 515 °C), according to TGA. Furthermore, the substitution pattern of PPM was discussed by study of chemical shifts of the methylene group by extensive NMR spectroscopy (¹H, ¹³C, DEPT, and HSQC) and by comparison with two mono‐substituted derivatives of PPM—poly(2,4,6‐trimethylphenylene methylene) and poly(2,3,5,6‐tetramethylphenylene methylene)—which were synthesized analogous to PPM. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 309–318     

Synthesis of a novel poly(para‐phenylene ethynylene) for highly selective and sensitive sensing mercury (II) ions

A new poly(p‐phenylene ethynylene) derivative with pendant 2,2′‐bipyridyl groups and glycol units (PPE‐bipy) has been prepared, and its metal ion sensing properties were investigated. The polymer of PPE‐bipy exhibited high selectivity for Hg²⁺ as compared with Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Al³⁺, Mn²⁺, Ag⁺, Zn²⁺, Pb²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Co,²⁺ and Fe³⁺ in THF/EtOH (1:1, v/v) solution. The fluorescence of PPE‐bipy was efficiently quenched by Hg²⁺ ions, and the detection limit was found to be 8.0 nM in a THF/EtOH (1:1, v/v) solvent system. PPE‐bipy also showed a selective chromogenic behavior toward Hg²⁺ ions by changing the color of the solution from slight yellow to colorless, which can be detected with the naked eye. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1998–2007, 2008     

Enhance effect of surfactants on the photoluminescence and photostability of water-soluble poly(phenylene ethynylene)

The interaction between the water-soluble anionic fluorescence conjugated polyelectrolytes PPESO 3 (poly[2,5-bis(3-sulfonatopropoxy)-1,4-phenylethynylene-alt- 1,4-poly(phenylene ethynylene)]) and various surfactants has been studied in aqueous solution by UV-vis absorption spectra and fluorescence spectra. With the addition of surfactants, the aggregations of polymers are broken up. For eliminating the self-quenching effect of the fluorescent polymers, the photoluminescence of PPESO 3 is dramatically enhanced. The photoluminescence of PPESO 3 can be enhanced 6- to 12-fold with the addition of different surfactants, and at higher concentration of surfactants, the photostability of PPESO 3 is also highly increased. A "micelle incorporation model" is proposed to explain the enhancement of photostability. To deeply understand the interaction processes between PPESO 3 and surfactants, we systematically studied the fluorescence spectra changes of PPESO 3 and the dynamic processes at different CTAB concentrations. All results prove the surfactants can simultaneously enhance the photoluminescence and photostability of water-soluble conjugated polyelectrolytes, and this method is very simple and powerful.     

Conformation of ionizable poly Para phenylene ethynylene in dilute solutions

The conformation of dinonyl poly para phenylene ethynylenes (PPEs) with carboxylate side chains, equilibrated in solvents of different quality have been studied using molecular dynamics simulations. PPEs are of interest because of their tunable electro‐optical properties, chemical diversity, and functionality which are essential in wide range of applications. The polymer conformation determines the conjugation length and their assembly mode and affects electro‐optical properties which are critical in current and potential uses. This study investigates the effect of carboxylate fraction on PPEs side chains on the conformation of chains in the dilute limit, in solvents of different quality. The dinonyl PPE chains are modeled atomistically, where the solvents are modeled both implicitly and explicitly. Dinonyl PPEs maintained a stretched out conformation up to a carboxylate fraction f of 0.7 in all solvents studied. The nonyl side chains are extended and oriented away from the PPE backbone in toluene and in implicit good solvent, whereas in water and implicit poor solvent, the nonyl side chains are collapsed toward the PPE backbone. Rotation around the aromatic ring is fast and no long range correlations are seen within the backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 582–588     

以离子-离子相互作用增强共混相容性Ⅰ.聚苯醚离聚体/聚(苯乙烯-乙烯吡啶)共混体系

本文从溶液行为和固体热行为对聚（2，6-二甲基1，4-苯醚）（PPO）离聚体（磺化聚苯醚或接化聚苯醚）／聚（苯乙烯-4-乙烯吡啶）（PS－VP）共混物进行了研究。DSC研究表明磺化度为7．7％mol的SPPO／PS－VP和羧化度为15％molCPPO炉S－VP在整个组成范围都是相容的。溶液行为研究表明，与对应的PPO／PS－VP共混物相比，这两个系列的共混物都表现出较高的比浓粘度。这是由于聚苯醚离聚体上的酸基发生质子转移，两组分间强烈的离子-离子相互作用导致分子间的络合，从而使比浓粘度的提高，也正是这种离子-离子相互作用使得这两对共混物完全相容。     

Spectroscopy and transport of the triplet exciton in a terthiophene end-capped poly(phenylene ethynylene)

Triplet states of poly(phenylene ethynylene), (3)PPE(*), not easily formed by direct photoexcitation, were produced by pulse radiolysis in toluene, along with triplet states of T(3)PPE having terthiophene end-caps. Intense triplet-triplet absorption maxima, epsilon(680)((3)PPE(*)) = 9.5 x 10(4) M(-1) cm(-1) and epsilon(780)((3)T(3)PPE(*)) = 2.8 x 10(4) M(-1) cm(-1) enable identification of these two species, which have triplet energies of 2.12 and 1.77 eV determined in bimolecular energy transfer equilibria. Bleaching of ground-state absorption measures (3)PPE(*) to be the delocalized over a 1.8-nm length. Triplet states formed in the PPE chains were transported to and trapped by the end caps in a time <5 ns.     

Poly(phenylene ethynylene)s with alkoxyphenyl substituents

Two new poly(phenylene ethynylene)s with alkoxyphenyl substituents were synthesized and characterized. The polymers were amorphous, dissolved readily in common organic solvents, and showed glass‐transition temperatures at 162–175 °C. They showed blue photoluminescence both in solution and in the solid state due to the steric interaction between the substituents and the main chain that caused an interruption of the conjugation length. The quantum yields in a tetrahydrofuran solution were up to 0.63. Excimer emission was the dominant product of the photoexcitation of thin films of the polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1449–1455, 2002