Improvement in the luminescence properties and processability of LaF3/Ln and LaPO4/Ln nanoparticles by surface modification

The surface of lanthanide(III)-doped LaPO4 nanoparticles was modified by reaction with an alcohol, leading to a covalent bond between the ligand and the particle surface. The surface of lanthanide(III)-doped LaF3 nanoparticles was modified to alter the solubility of the nanoparticles and study the influence of surface effects on the luminescence of lanthanide ions doped in the nanoparticles. The coordinated organic ligands can be modified by a quantitative exchange reaction in solution or by using functionalized ligands during the synthesis. Variation of the ratio of ligand to core reagents had a significant influence on the size of the nanoparticles. Smaller nanoparticles were formed with a higher ligand ratio. The optical properties of these nanoparticles show a strong dependence on nanoparticle size, indicating the influence of quenching probably by CH and OH groups at or near the surface of the nanoparticle cores. The luminescence lifetime of LaF3/Eu nanoparticles varied from 6.5 to 7.4 ms for nanoparticles with an average size of 7.1 to 8.4 nm. A significant reduction of the quenching from the surface of the nanoparticles was obtained by the synthesis of core-shell nanoparticles, in which a shell of LaF3 was grown epitaxially around the doped core nanoparticles. This leads to an increase in the luminescence lifetime of the Eu3+ ion and the observation of emissions from the 5D2 energy level, in addition to emissions from the 5D1 and 5D0 levels. The quantum yield of LaF3/Ce,Tb nanoparticles could be increased from 24 to 54% by the growth of a LaF3 shell around the nanoparticles.     

Dual Signal Amplification Electrochemical Biosensor for Lead Cation

Herein, a sensitive electrochemical Pb²⁺ sensor was developed which based on DNA‐functionalized Au nanoparticles(AuNPs) and nanocomposite modified electrode. The DNA‐functionalized AuNPs includes two types of DNA, namely a Pb²⁺‐mediated DNAzyme comprising a biotin labeled‐enzyme DNA and a substrate strand DNA with a typical stem‐loop structure, and a ferrocene‐labeled linear signal DNA. Without Pb²⁺, the hairpin loop impeded biotin binding to avidin on the electrode. However,when the goal Pb²⁺ exists, the substratum strand was divided into two fragments that lead to the enzyme strand was substratumed on the electrode and biotin was admited by avidin, bringing about DNA‐functionalized AuNP(AuNPs) deposition on the electrode surface.The differential pulse voltammetry (DPV) was used to measure electrochemical response signals connect to signal DNA.For the amplification characters of the DNA‐functionalized AuNPs and nanocomposite, the electrochemical detection signal of Pb²⁺ was greatly improved and revealed high specificity. Under optimum conditions, the resultant biosensor bringed out a high sensitivity and selectivity for the determination of Pb²⁺. The proposed method was able to detect as low as picomolar Pb²⁺ concentrations.     

Photochemistry of ruthenium trisbipyridine functionalized on gold nanoparticles

Design of nanohybrid systems possessing several ruthenium trisbipyridine (Ru(bpy)(3)(2+)) chromophores on the surface of gold nanoparticles, by adopting a place exchange reaction, was reported and their photophysical properties were tuned by varying the density of chromophores. The charge shift between the excited and ground-state Ru(bpy)(3)(2+) chromophores was reported for the first time, leading to the formation of Ru(bpy)(3)(+) and Ru(bpy)(3)(3+). Electron-transfer products were not observed on decreasing the concentration of Ru(bpy)(3)(2+) functionalized on Au nanoparticles or in a saturated solution of unbound chromophores. The close proximity of the chromophores on periphery of the gold core may lead to an electron transfer reaction and the products sustained for several nanoseconds before undergoing recombination, probably due to the stabilizing effect of the polar ethylene glycol moieties embedded between the chromophore groups.     

Synthesis of Pentaerythritol-Based Branching Reagents for Modification of Proteins and Nucleic Acids by [2+3] Dipolar Cycloaddition Reaction

Alkylation of pentaerythritol symmetrically substituted with propylene glycol with propargyl bromide afforded compounds containing two or three alkyne moieties. Amidophosphite reagents and solid supports were prepared for the introduction of two and three acetylene fragments into oligonucleotides at the 3'- and 5'-positions and inside the chain under conditions of automated solid-phase oligonucleotide synthesis. Based on the trialkynyl derivative, an N-hydroxysuccinimide ester was obtained which can be used to modify biomolecules attacking the amino group. Conjugates obtained can be used for multiple modifications by [3+2] dipolar cycloaddition reaction.     

Silica-coated Ln3+-Doped LaF3 nanoparticles as robust down- and upconverting biolabels

The preparation of nearly monodisperse (40 nm), silica-coated LaF(3):Ln(3+) nanoparticles and their bioconjugation to FITC-avidin (FITC=fluorescein isothiocyanate) is described in this report. Doping of the LaF(3) core with selected luminescent Ln(3+) ions allows the particles to display a range of emission lines from the visible to the near-infrared region (lambda=450-1650 nm). First, the use of Tb(3+) and Eu(3+) ions resulted in green (lambda=541 nm) and red (lambda=591 and 612 nm) emissions, respectively, by energy downconversion processes. Second, the use of Nd(3+) gave emission lines at lambda=870, 1070 and 1350 nm and Er(3+) gave an emission line at lambda=1540 nm by energy downconversion processes. Additionally, the Er(3+) ions gave green and red emissions and Tm(3+) ions gave an emission at lambda=800 nm by upconversion processes when codoped with Yb(3+) (lambda(ex)=980 nm). Bioconjugation of avidin, which has a bound fluorophore (FITC) as the reporter, was carried out by means of surface modification of the silica particles with 3-aminopropyltrimethoxysilane, followed by reaction with the biotin-N-hydroxysuccinimide activated ester to form an amide bond, imparting biological activity to the particles. A 25-fold or better increase in the FITC signal relative to the non-biotinylated silica particles indicated that there is minimal nonspecific binding of FITC-avidin to the silica particles.     

Atmospheric chemistry of a model biodiesel fuel, CH3C(O)O(CH2)2OC(O)CH3: kinetics, mechanisms, and products of Cl atom and OH radical initiated oxidation in the presence and absence of NOx

Relative rate techniques were used to study the kinetics of the reactions of Cl atoms and OH radicals with ethylene glycol diacetate, CH3C(O)O(CH2)2OC(O)CH3, in 700 Torr of N2/O2 diluent at 296 K. The rate constants measured were k(Cl + CH3C(O)O(CH2)2OC(O)CH3) = (5.7 +/- 1.1) x 10(-12) and k(OH + CH3C(O)O(CH2)2OC(O)CH3) = (2.36 +/- 0.34) x 10(-12) cm3 molecule-1 s-1. Product studies of the Cl atom initiated oxidation of ethylene glycol diacetate in the absence of NO in 700 Torr of O2/N2 diluent at 296 K show the primary products to be CH3C(O)OC(O)CH2OC(O)CH3, CH3C(O)OC(O)H, and CH3C(O)OH. Product studies of the Cl atom initiated oxidation of ethylene glycol diacetate in the presence of NO in 700 Torr of O2/N2 diluent at 296 K show the primary products to be CH3C(O)OC(O)H and CH3C(O)OH. The CH3C(O)OCH2O* radical is formed during the Cl atom initiated oxidation of ethylene glycol diacetate, and two loss mechanisms were identified: reaction with O2 to give CH3C(O)OC(O)H and alpha-ester rearrangement to give CH3C(O)OH and HC(O) radicals. The reaction of CH3C(O)OCH2O2* with NO gives chemically activated CH3C(O)OCH2O* radicals which are more likely to undergo decomposition via the alpha-ester rearrangement than CH3C(O)OCH2O* radicals produced in the peroxy radical self-reaction.     

Thermoresponsive dendronized copolymers for protein recognitions based on biotin-avidin interaction

Thermoresponsive biotinylated dendronized copolymers carrying dendritic oligoethylene glycol(OEG) pendants were prepared via free radical polymerization,and their protein recognitions based on biotin-avidin interaction investigated.Both first(PG1)and second generation(PG2)dendronized copolymers were designed to examine possible thickness effects on the interaction between biotin and avidin.Inherited from the outstanding thermoresponsive properties from OEG dendrons,these biotinylated cylindrical copolymers show characteristic thermoresponsive behavior which provides an envelope to capture avidin through switching temperatures above or below their phase transition temperatures(T_cps).Thus,the recognition of polymer-supported biotin with avidin was investigated with UV/vis spectroscopy and dynamic laser light scattering.In contrast to the case for PG1,the increased thickness for copolymer PG2 hinders partially and inhibits the recognition of biotin moieties with avidin either below or above its T_cp.This demonstrates the significant architecture effects from dendronized polymers on the biotin moieties to shift onto periphery of the collapsed aggregates,which should be a prerequisite for protein recognition.These kinds of novel thermoresponsive copolymers may pave a way for the interesting biological applications in areas such as reversible activity control of enzyme or proteins,and for controlled delivery of drugs or genes.     

Hydrothermal preparation and luminescence of LaF3:Eu3+ nanoparticles

LaF3:Eu3+ nanoparticles were prepared by a simple hydrothermal process at low temperature and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and fluorescence spectrum. Well-dispersed nanoparticles with an average size of 30 nm and a hexagonal shape were obtained. The influences of reaction temperature and time on the preparation and luminescence of LaF3:Eu3+ nanoparticles were investigated. Luminescent quenching occurred at a much higher concentration ( approximately 25mol%) and stronger luminescent intensity than in bulk LaF3:Eu3+. Fluorescence intensity of the LaF3:Eu3+ nanoparticles varied remarkably with calcination temperatures. It was found that samples without any further calcinations can emit quite strong fluorescence.     

Poly(N-vinylcaprolactam-co-glycidyl methacrylate) aqueous microgels labeled with fluorescent LaF3:Eu nanoparticles

We describe the synthesis and properties of functional microgel particles based on poly(N-vinylcaprolactam-co-glycidyl methacrylate) (PVCL/PGMA) copolymer. A series of colloidally stable microgel particles with a range of glycidyl methacrylate content were prepared by surfactant-free heterophase polymerization in water. The microgel particles obtained had hydrodynamic radii between 250 and 350 nm and were fairly monodisperse in size; however, a broadening of the particle size distribution was observed for samples with a low GMA content. The PVCL/PGMA microgel particles exhibit thermally responsive reversible changes in diameter in water, and the swelling degree increased with the PVCL fraction in the copolymer structure. These microgels were then modified with photoluminescent europium-doped lanthanum fluoride nanoparticles (LaF3:Eu-AEP) through reaction of the 2-aminoethyl phosphate surface ligands with epoxy groups present in the microgel. These hybrid microgels were colloidally stable and thermally responsive in aqueous solution.     

Luminescent nanocrystals for nonenzymatic glucose concentration determination

By using a facile, wet-chemical approach, luminescent LaF3:Ce3+/Tb3+ single-crystal nanoparticles were prepared from nitrate and sodium fluoride precursors in a mixture of ethanol and ethylene glycol. These nanoparticles were functionalized with glucose. A novel fluorescence resonance energy transfer method for nonenzymatic glucose determination has been developed by using these glucose-modified nanocrystals. Under the chosen conditions, concentrations of glucose between 0.5 and 25.0 mmol L-1 in aqueous solutions were successfully determined. Owing to their high luminescence and good dispersibility in water, these nanocrystals are also potential fluorescent biolabels for other biological and clinical applications, such as in fluorescence imaging and for immunoassays.     

Controlled formation of gold nanoparticle dimers using multivalent thiol ligands

Approaches for the controlled formation of gold nanoparticle dimers are investigated. These are based on a locally confined surface modification of gold nanoparticles followed by bridging two particles with an organic linker. A key factor in these approaches is the use of multivalent ligands. Citrate-stabilized gold nanoparticles are immobilized on a glass surface and mono- and multivalent thiol ligands are investigated regarding their ability to inactivate the nanoparticles sites facing away from the glass. A successful locally confined functionalization is only possible if multivalent ligands are used in this step. The application of monovalent ligands results in less stable particles without a permanent regioselective functionalization. This result can be explained by the dynamic equilibrium between bound and free ligands. Subsequently, the sites of the nanoparticles previously bound to the glass surface are functionalized with thiol ligands additionally bearing a reactive group. Approaches using dithiol linkers, diamine linkers, and coupling complementary functionalized particles are investigated. The highest yield of stable dimers is obtained from conditions where nanoparticles which are regioselectively functionalized with an N-hydroxysuccinimide ester are reacted with complementary amino-functionalized particles. The application of nanoparticles with activated carboxyl groups is essential since standard carboxyl activation agents induce an aggregation of the nanoparticles due to a reaction with remaining citrate molecules on the nanoparticle surface which reduces significantly electrostatic stabilization. This versatile approach using complementary regioselective with multivalent ligands functionalized nanoparticles may be also used for the coupling of particles with different size, shape, or composition, as well as a control of the interparticle distance.     

Multicolored and white-light phosphors based on doped GdF3 nanoparticles and their potential bio-applications

Rare-earth-doped gadolinium fluoride nanocrystals were synthesized by a single step synthesis employing ethylene glycol as solvent. Based on X-ray diffraction studies, stabilization of hexagonal modification of GdF(3) has been inferred. The microscopic studies show formation of uniformly distributed nanocrystals (~15 nm). The nanoparticles are readily dispersible in water and show bright luminescence in colloidal solution. The luminescence properties have been investigated as a function of activator concentrations, and enhanced optical properties have been attributed to efficient energy transfer from the Gd(3+) to the activator RE(3+) ions, which has further been confirmed by steady-state and time-resolved optical studies. It has been demonstrated that on doping appropriate amount of activators in host GdF(3), a novel white-light-emitting phosphor is obtained with CIE co-ordinates and correlated color temperature (CCT) very close to broad daylight. This can have promising applications as phosphor for white-light ultraviolet-light-emitting diodes (UV-LEDs). Our experiments showed efficient labeling of human breast carcinoma cells (MCF-7) by Tb(3+)-doped GdF(3) nanoparticles. The fluorescence intensity was found to be dependent on the surface modifying/coating agent, and the results were validated using confocal microscopy in terms of localization of these functionalized nanoparticles.     

Tagging of avidin immobilized beads with biotinylated YAG:Ce3+ nanocrystal phosphor

YAG:Ce³⁺ nanoparticles 9.5 ± 1.2 nm in diameter have been synthesized from aluminium isopropoxide and acetates of yttrium and cerium in 1,4-butanediol (1,4-BD) by autoclave treatment at 300 °C for 2 h. After replacing 1,4-BD by ultrapure water, NH₂ groups were introduced on the surface of YAG:Ce³⁺ nanoparticles by addition of 3-aminopropyltrimethoxysilane then biotinylation with sulfo-NHS-LC-biotin. We demonstrated that avidin immobilized beads are tagged by biotinylated YAG:Ce³⁺ nanoparticles by the selective avidin-biotin interaction, furnishing a green fluorescent image on excitation with blue light. This result indicates that YAG:Ce³⁺ nanoparticle phosphors have much potential in biological applications.     

Preparation, characterization, resistance to protein adsorption, and specific avidin-biotin binding of poly(amidoamine) dendrimers functionalized with oligo(ethylene glycol) on gold

Protein-resistant films derived from the fifth-generation poly(amidoamine) dendrimers (PAMAM G5) functionalized with oligo(ethylene glycol) (OEG) derivatives consisting of various ethylene glycol units (EG(n), n = 3, 4, and 6) were prepared on the self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid (MUA) on gold substrates. The resulting films were characterized by ellipsometry, contact angle goniometry, and X-ray photoelectron spectroscopy (XPS). About 35% of the peripheral amines of the dendrimers were reacted with N-hydroxysuccinimide-terminated EG(n) derivatives (NHS-EG(n)). The dendrimer films showed improved stability over octadecanethiolate SAMs on gold in hot solvents, attributed to the formation of multiple amide bonds per PAMAM unit with underlying NHS-activated MUA monolayer. The EG(n)-attached PAMAM surfaces with n = 3 reduced the adsorption of fibrinogen to approximately 20% monolayer, whereas 2-3% for n = 4 or 6. The dendrimer films with various densities of EG(n) molecules on PAMAM surfaces were prepared by immersion of the NHS-terminated MUA-functionalized gold substrates in ethanolic solutions containing PAMAM and NHS-EG(n) of various mole ratios. The density (r) of the EG(n) molecules on the PAMAM surfaces is consistent with the mole ratio (r') of NHS-EG(n)/free amine of PAMAM in solutions. The resistance to protein adsorption of the resulting surfaces is correlated with the surface density and the length of the EG chains. At their respective r, the EG(n)-modified dendrimer films resisted approximately 95% adsorption of fibrinogen on gold surfaces. Finally, the specific binding of avidin to the approximately 5% and approximately 40% biotinylated EG3 dendrimers (surface density of biotin with respect to the total number of terminal amino groups on PAMAM G5) gave rise to about 50% and 100% surface coverage by avidin, respectively.     

Luminescence behavior of Eu3+ doped LaF3 nanoparticles

Europium-doped LaF3 nanoparticles have been prepared by the ionic reaction in the ethanol at 60 degrees C. From the XRD pattern of nanoparticles and the emission spectra of Eu3+ ions, it has been concluded that the Eu3+ ions could easily substitute the La3+ sites and the solid solution La(1-x)Eu(x)F3 can be synthesized. Due to very low phonon energies of LaF3 matrix, the 5D1 emission of Eu3+ ions in La(1-x)Eu(x)F3 nanoparticles can be observed at room temperature when doping concentration of Eu3+ ions is lower than 30 mol%. The quenching process of 5D1 emission can be attributed to cross-relaxation. Since clusters of Eu3+ ions and resonance energy transfer only occurs within one particle due to the hindrance by the particle boundary, the concentration quenching resulted from resonance energy transfer between neighboring Eu3+ ions occurs at higher Eu3+ concentrations in the Eu3+ doped LaF3 nanoparticles.     

Color kinetic nanoparticles

Eu3+ doped LaF3 nanoparticles functionalized with a 3-4 formylphenyl benzoic acid ligand were synthesized. Excitation energy-dependent energy transfer from the ligand to Eu3+ yields color tunability from the red to greenish-blue as a function of excitation wavelengths. This synthetic approach provides large shifts in the resultant chromaticity with an excitation wavelength including the generation of white light.     

Magnetic Fe2O3-polystyrene/PPy core/shell particles: bioreactivity and self-assembly

This paper describes the synthesis of new magnetic, reactive polystyrene/polypyrrole core/shell latex particles. The core consists of a polystyrene microsphere containing gamma-Fe2O3 superparamagnetic nanoparticles (PSmag), and the shell is made of reactive N-carboxylic acid-functionalized polypyrrole (PPyCOOH). These PSmag-PPyCOOH latex particles, average diameter 220 nm, were prepared by copolymerization of pyrrole (Py) and the active carboxyl-functionalized pyrrole (PyCOOH) in the presence of PSmag particles. PNVP was used as a steric stabilizer. The functionalized polypyrrole-coated PSmag particles were characterized in terms of their particle size, surface morphology, chemical composition, and electrochemical and magnetic properties using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry, and SQUID magnetometry. Activation of the particle surface carboxyl groups was achieved using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS), which helps transform the carboxyl groups into activated ester groups (NSE). The activated particles, PSmag-PPyNSE, were further evaluated as bioadsorbents of biotin used as a model biomolecule. It was shown that biotin was immobilized at the surface of the PSmag-PPyNSE particles by forming interfacial amide groups. The assemblies of PSmag-PPyCOOH particles on glass plates were further investigated. When no magnetic field is applied, the particles assemble into 3D colloidal crystals. In contrast, under a magnetic field, one-particle-thick chains gathered in hedgehog-like architectures are obtained. Furthermore, PSmag-PPyCOOH coated ITO electrodes were shown to be electroactive and electrochemically stable, thus offering potentialities for creating novel high-specific-area materials for biosensing devices where the conducting polymer component would act as the transducer through its conductive properties.     

Multinuclear solid-state NMR spectroscopy of doped lanthanum fluoride nanoparticles

Multinuclear solid-state NMR spectroscopy and powder X-ray diffraction (XRD) experiments are applied to comprehensively characterize a series of pure and lanthanide-doped LaF3 nanoparticles (NPs) that are capped with di-n-octadectyldithiophosphate ligands (Ln3+ = diamagnetic Y3+ and Sc3+ and paramagnetic Yb3+ ions), as well as correlated bulk microcrystalline materials (LaF3, YF3, and ScF3). Solid-state 139La and 19F NMR spectroscopy of bulk LaF3 and the LaF3 NPs reveal that the inorganic core of the NP retains the LaF3 structure at the molecular level; however, inhomogeneous broadening of the NMR powder patterns arises from distributions of 139La and 19F NMR interactions, confirming a gradual change in the La and F site environments from the NP core to the surface. 139La and 19F NMR experiments also indicate that low levels (5 and 10 mol %) of Ln3+ doping do not significantly change the LaF3 structure in the NP core. Similar doping levels of paramagnetic Yb3+ ions severely broaden 19F resonances, but only marginally effect 139La powder patterns, suggesting that the dopant ions are uniformly distributed throughout the NP core and occupy vacant La sites. Measurements of 139La T1 and T2 relaxation constants are seen to vary between the bulk material and NPs and between samples with diamagnetic and paramagnetic dopants. 45Sc NMR experiments confirm that the dopants are integrated into the La sites of the LaF3 core. Solid-state 1H and 31P magic-angle spinning (MAS) NMR spectra aid in probing the nature of the capping ligands and their interactions at the NP surface. 31P cross-polarization (CP)/MAS NMR experiments identify not only the dithiophosphate head groups but also thiophosphate and phosphate species which may form during NP synthesis. Finally, 19F-31P CP/MAS and 1H MAS experiments confirm that ligands are coordinated to the NP surface.     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

Quantitative FT-IRRAS spectroscopic studies of the interaction of avidin with biotin on functionalized quartz surfaces

The interaction of avidin with biotin was studied on functionalized quartz surfaces terminated with 3-aminopropyltrimethoxysilane (3-APTMS), 2,2'-(ethylenedioxy)bis(ethylenediamine) (DADOO), and fourth-generation amine-terminated polyamidoamine (G4-NH2 PAMAM) dendrimers with the use of Fourier transform infrared reflection-absorption spectroscopy (FT-IRRAS). In particular, the molecular recognition ability of these surfaces was quantified through FT-IRRAS in combination with the use of an alkyne dicobalt hexacarbonyl probe coupled with avidin. The degree of nonspecific adsorption of avidin was determined by exposure of the amine-terminated and/or biotinylated surfaces to solutions of biotin-saturated avidin. The results indicate that the biotinylated 3-APTMS layer exhibits a very low specific binding capacity for avidin (on the order of 0.15 pmol of avidin/cm2) and substantial nonspecific adsorption. Both the binding capacity and the specificity were greatly improved when the 3-APTMS layer on quartz was modified through serial chemisorption of glutaraldehyde (GA), DADOO, and/or G4-NH2 PAMAM dendrimer layers. Among these layers, the biotinylated G4-NH2 PAMAM dendrimer layer exhibited the highest capacity for avidin binding (2.02 pmol of avidin/cm2) with a specificity of approximately 90%. This effect can be attributed to the efficient packing/ordering of the binding dendrimer layer, leading to a more dense and better organized layer of biotin headgroups on the subsequent biotinylated surface.