Hydrogen storage in a microporous metal-organic framework with exposed Mn2+ coordination sites

Use of the tritopic bridging ligand 1,3,5-benzenetristetrazolate (BTT3-) enables formation of [Mn(DMF)6]3[(Mn4Cl)3(BTT)8(H2O)12]2.42DMF.11H2O.20CH3OH, featuring a porous metal-organic framework with a previously unknown cubic topology. Crystals of the compound remain intact upon desolvation and show a total H2 uptake of 6.9 wt % at 77 K and 90 bar, which at 60 g H2/L provides a storage density 85% of that of liquid hydrogen. The material exhibits a maximum isosteric heat of adsorption of 10.1 kJ/mol, the highest yet observed for a metal-organic framework. Neutron powder diffraction data demonstrate that this is directly related to H2 binding at coordinatively unsaturated Mn2+ centers within the framework.     

Hydrogen storage in the dehydrated prussian blue analogues M3[Co(CN)6]2 (M = Mn, Fe, Co, Ni, Cu, Zn)

The porosity and hydrogen storage properties for the dehydrated Prussian blue analogues M3[Co(CN)6]2 (M = Mn, Fe, Co, Ni, Cu, Zn) are reported. Argon sorption isotherms measured at 87 K afford BET surface areas ranging from 560 m2/g for Ni3[Co(CN)6]2 to 870 m2/g for Mn3[Co(CN)6]2; the latter value is comparable to the highest surface area reported for any known zeolite. All six compounds show significant hydrogen sorption at 77 K and 890 Torr, varying from 1.4 wt % and 0.018 kg H2/L for Zn3[Co(CN)6]2 to 1.8 wt % and 0.025 kg H2/L for Cu3[Co(CN)6]2. Fits to the sorption data employing the Langmuir-Freundlich equation give maximum uptake quantities, resulting in a predicted storage capacity of 2.1 wt % and 0.029 kg H2/L for Cu3[Co(CN)6]2 at saturation. Enthalpies of adsorption for the frameworks were calculated from hydrogen isotherms measured at 77 and 87 K and found to increase with M varying in the order Mn < Zn < Fe < Co < Cu < Ni. In all cases, the binding enthalpies, which lie in the range of 5.3-7.4 kJ/mol, are higher than the 4.7-5.2 kJ/mol measured for Zn4O(1,4-benzenedicarboxylate)3.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure of glycine and zwitterionic glycine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. Here, the effect of metal ions and water on the structure of glycine is examined. The effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water on structures of Gly.Mn+(H2O)m and GlyZwitt.Mn+(H2O)m (m = 0, 2, 5) complexes have been determined theoretically by employing the hybrid B3LYP exchange-correlation functional and using extended basis sets. Selected calculations were carried out also by means of CBS-QB3 model chemistry. The interaction enthalpies, entropies, and Gibbs energies of eight complexes Gly.Mn+ (Mn+ = Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) were determined at the B3LYP density functional level of theory. The computed Gibbs energies DeltaG degrees are negative and span a rather broad energy interval (from -90 to -1100 kJ mol(-1)), meaning that the ions studied form strong complexes. The largest interaction Gibbs energy (-1076 kJ mol(-1)) was computed for the NiGly2+ complex. Calculations of the molecular structure and relative stability of the Gly.Mn+(H2O)m and GlyZwitt.Mn+(H2O)m (Mn+ = Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+; m = 0, 2, and 5) systems indicate that in the complexes with monovalent metal cations the most stable species are the NO coordinated metal cations in non-zwitterionic glycine. Divalent cations Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+ prefer coordination via the OO bifurcated bonds of the zwitterionic glycine. Stepwise addition of two and five water molecules leads to considerable changes in the relative stability of the hydrated species. Addition of two water molecules at the metal ion in both Gly.Mn+ and GlyZwitt.Mn+ complexes reduces the relative stability of metallic complexes of glycine. For Mn+ = Li+ or Na+, the addition of five water molecules does not change the relative order of stability. In the Gly.K+ complex, the solvation shell of water molecules around K+ ion has, because of the larger size of the potassium cation, a different structure with a reduced number of hydrogen-bonded contacts. This results in a net preference (by 10.3 kJ mol(-1)) of the GlyZwitt.K+H2O5 system. Addition of five water molecules to the glycine complexes containing divalent cations Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+ results in a net preference for non-zwitterionic glycine species. The computed relative Gibbs energies are quite high (-10 to -38 kJ mol(-1)), and the NO coordination is preferred in the Gly.Mn+(H2O)5 (Mn+ = Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) complexes over the OO coordination.     

Strong H(2) binding and selective gas adsorption within the microporous coordination solid Mg(3)(O(2)C-C(10)H(6)-CO(2))(3)

The synthesis of Mg3(NDC)3(DEF)4 (NDC = 2,6-naphthalenedicarboxylate, DEF = N,N-diethylformamide, 1), the first porous metal-organic framework solid incorporating Mg2+ ions, is reported. Its structure consists of linear Mg3 units linked via NDC bridges to form a three-dimensional framework, featuring one-dimensional channels filled with DEF molecules. Significantly, its framework is fully analogous to that observed within Zn3(NDC)3(CH3OH)2.2DMF.H2O (2), demonstrating that Mg2+ ions can directly substitute for the heavier Zn2+ ions. Compound 1 is readily desolvated by heating at 190 degrees C to give the microporous solid Mg3(NDC)3, exhibiting a BET surface area of 190 m2/g. Adsorption isotherms measured at 77 and 87 K indicate high H2 adsorption enthalpies in the range 7.0-9.5 kJ/mol, depending on the degree of loading. In addition, the material displays selective adsorption of H2 or O2 over N2 or CO, suggesting possible applications in gas separation technologies.     

Self-encapsulation of [MII(phen)2(H2O)2]2+ (M=Co, Zn) in one-dimensional nanochannels of [MII(H2O)6(BTC)2]4- (M=Co, Cu, Mn): a high HQ/CAT ratio catalyst for hydroxylation of phenols

Four novel three-dimensional (3D) microporous supramolecular compounds containing nanosized channels, namely, [Co(phen)2(H2O)2]2[Co(H2O)6].2BTC.21.5H2O (1), [Co(phen)2(H2O)2]2[Cu(H2O)6].2BTC.21.5H2O (2), [Co(phen)2(H2O)2]2[Mn(H2O)6].2BTC.18H2O (3), and [Zn(phen)2(H2O)2]2[Mn(H2O)6].2BTC.22.5H2O (4), were synthesized from 1,3,5-benzenetricarboxylate (BTC), 1,10-phenanthroline (phen), and the transition-metal salt(s) by self-assembly. Single-crystal X-ray structural analysis showed that the resulting 3D microporous supramolecular frameworks consist of a two-dimensional (2D) hydrogen-bonded host framework of [MII(H2O)6(BTC)2]4- (M=Co for 1, Cu for 2, Mn for 3, 4) with rectangular-shaped cavities containing [MII(phen)2(H2O)2]2+ (M=Co for 1-3, Zn for 4) guests. The guest complex is encapsulated in the 2D hydrogen-bonded host framework by hydrogen bonding and aromatic pi-pi stacking interactions, forming the 3D hydrogen-bonded framework. The catalytic activities of 1, 2, 3, and 4 were studied using hydroxylation of phenols with 30% aqueous H2O2 as a test reaction. The compounds displayed a good phenol conversion ratio and excellent channel selectivity in the hydroxylation reaction, with a maximum hydroquinone (HQ)/catechol (CAT) ratio of 3.9.     

Hydrogen storage properties of metal nitroprussides M[Fe(CN)5NO], (M = Co, Ni)

The volumetric hydrogen adsorption isotherms of two isostructural dehydrated cubic metal nitroprussides M[Fe(CN)5NO] (M = Co2+, Ni2+) have been measured up to a pressure of 760 Torr at 77 and 87 K. These materials are among the most efficient H2 sorbents based on porous coordination polymers reported to date. The H2 uptake in both materials is approximately 1.6 wt % at 77 K and 760 torr. These H2 capacities match those reported recently in the structurally related M3[Co(CN)6]2 compounds and are approximately 25% higher than those reported for Zn4O(1,4-benzenedicarboxylate)3 under the same conditions of temperature and pressure. The isosteric heats of H2 adsorption calculated from the 77 and 87 K isotherms for both materials were found to vary from approximately 7.5 kJ/mol at 0.40 wt % coverage to approximately 5.5 kJ/mol at 1.2 wt % coverage. The N2 BET surface areas were determined to be 634 m2/g and 523 m2/g for M = Ni and M = Co, respectively.     

吡咯并[2,1,5-cd]中氮茚酰腙衍生物的合成及Cu2+荧光探针行为

设计合成了吡咯并[2,1,5-cd]中氮茚酰腙衍生物6. 测试了其紫外光谱和荧光光谱, 研究了其对铜离子的选择性识别作用. 结果表明, 化合物6作为铜离子荧光探针, 受常见离子干扰较小, 对于铜离子有着较高的选择性和较低的检出限.     

P204萃取色谱法对Co~(2+)的分离研究

对萃取色谱法分离钴与铜、镉、锰、锌、铁等金属离子进行了研究。用含Ｐ２０４萃取剂的萃淋树脂,经过ｐＨ４．０的ＮａＡｃ溶液转型后,只需用ｐＨ２．５的氯乙酸－氯乙酸钠缓冲溶液作为流动相淋洗,就可将钴与其它金属离子分离。方法分离效果好,操作简单方便,是分离分析钴的一种新方法。     

低压离子分离-化学发光在线检测过渡金属离子

 研究了低压离子 (LPIC)分离 柱后鲁米诺化学发光 (CL)检测方法 ,并分离测定了Cu2 + ,Co2 + ,Cr3 + ,Fe2 + ,Mn2 + 等 5种过渡金属离子。以草酸 柠檬酸混合溶液作为洗脱液 ,Luminol H2 O2 Mn + 作为化学发光检测体系 ,对过渡金属离子进行在线检测。测定的线性范围分别为 (mg·L-1) :Co2 + ,0 0 0 1～ 0 .1;Cu2 + ,0 1～ 6 ;Mn2 + ,0 0 6～ 4 ;Fe2 + ,0 0 3～ 5 ;Cr3 + ,0 0 2 5～ 1。检测限分别为 (μg·L-1) :Co2 + ,0 85 ;Cu2 + ,85 ;Mn2 + ,4 2 ;Fe2 + ,2 1;Cr3 + ,2 0。     

Size-selective Lewis acid catalysis in a microporous metal-organic framework with exposed Mn2+ coordination sites

Treatment of selected aldehydes and ketones with cyanotrimethylsilane in the presence of the microporous metal-organic framework Mn3[(Mn4Cl)3BTT8(CH3OH)10]2 (1, H3BTT = 1,3,5-benzenetristetrazol-5-yl) leads to rapid conversion to the corresponding cyanosilylated products. The transformation is catalyzed by coordinatively unsaturated Mn2+ ions that serve as Lewis acids and lead to conversion yields of 98 and 90% for benzaldehyde and 1-naphthaldehyde, the highest thus far for a metal-organic framework. Larger carbonyl substrates cannot diffuse through the pores of 1, and conversion yields are much lower for these, attesting to the heterogeneity of the reaction and its dependence on guest size. The Mukaiyama-aldol reaction, known to require much more active Lewis catalysts, is also catalyzed in the presence of 1, representing the first such example for a metal-organic framework. Conversion yields obtained for the reaction of selected aldehydes with silyl enolates reach 63%, on par with those obtained with zeolites. Size selectivity is demonstrated for the first time with this reaction through the use of larger silyl enolate substrates.     

Equilibrium study of selected divalent d-electron metals adsorption on A-type zeolite

The objective of the presented study was to investigate the adsorption of Cu, Co, Mn, Zn, Cd and Mn on A-type zeolite. The isotherms for adsorption of metals from their nitrates were registered. The following adsorption constants K of metals were found: 162,890, 124,260, 69,025, 16,035, 10,254, and 151 [M(-1)] for Cu, Co, Mn, Zn, Cd, and Ni, respectively, for the concentration range 10(-4)-10(-3) M. On the other hand, the investigation of pH influence on the distribution constants of metals showed that the adsorption of metals proceeds essentially through an ion-exchange process, surface hydrolysis, and surface complexation. The supplementary results from DRIFT, scanning electron microscopy, and X-ray diffraction methods confirmed the presumption about the possible connection between the electronic structure of divalent ions and their adsorption behavior, showing that ions with d5 and d10 configurations such as Mn2+, Zn2+, Cd2+, with much weaker hydrolytic properties than Cu2+ and Ni2+, strongly interact with the zeolite framework and therefore their affinity to the zeolite phase is much stronger when compared with that of the Ni2+ ion, but at the same time not as strong as the affinity of the Cu2+ ion, the latter forming a new phase during the interaction with zeolite framework. For Zn2+, during inspection of the correlation between the proton concentration H/Al and zinc concentration Zn/Al on the zeolite surface, the formation of the surface complex [triple bond]S-OZn(OH) was proposed. A correlation between the heterogeneity of proton concentrations H/Al on Me-zeolite surfaces and the hydrolysis constants pKh of Me2+ ions was found.     

Mn(II)-based porous metal-organic framework showing metamagnetic properties and high hydrogen adsorption at low pressure

A Mn(II)-based homometallic porous metal-organic framework, Mn(5)(btac)(4)(μ(3)-OH)(2)(EtOH)(2)·DMF·3EtOH·3H(2)O (1, btac = benzotriazole-5-carboxylate), has been solvothermally synthesized and structurally characterized by elemental analysis, thermogravimetric analysis, and X-ray crystallographic study. 1 is a 3D neutral framework featuring 1D porous channels constructed by {Mn-OH-Mn}(n) chains and btac linkers. Magnetic studies show that 1 is a 3D metamagnet containing 1D {Mn-OH-Mn}(n) ferrimagnetic chains. High-pressure H(2) adsorption measurement at 77 K reveals that activated 1 can absorb 0.99 wt % H(2) at 0.5 atm and reaches a maximum of 1.03 wt % at 5.5 atm. The steep H(2) absorption at lower pressure (98.2% of the storage capacity at 0.5 atm) is higher than the corresponding values of some MOFs (MIL-100 (16.1%), MOF-177 (57.1%), and MOF-5 (22.2%)). Furthermore, activated 1 can adsorb CO(2) at room temperature and 275 K. The adsorption enthalpy is 22.0 kJ mol(-1), which reveals the high binding ability for CO(2). Detailed gas sorption implies that the exposed Mn(II) coordination sites in the activated 1 play an important role to improve its adsorption capacities.     

Asymmetric Schiff Base (N 2 O 3 ) Complexes as Ligands Towards Mn(II), Fe(III) and Co(II), Synthesis and Characterization

Heterobi- and tri-nuclear complexes [LMM'Cl] and [(LM) 2 M'](M=Ni or Cu and M'=Mn, Fe or Co) have been synthesised. The heteronuclear complexes were prepared by stepwise reactions using two mononuclear Ni(II) and Cu(II) complexes of the general formula [HLM]·1/2H 2 O, as ligands towards the metal ions, Mn(II), Fe(III) and Co(II). The asymmetrical pentadentate (N 2 O 3 ) Schiff-base ligands used were prepared by condensing acetoacetylphenol and ethylenediamine, molar ratio 1 1, to yield a half-unit compound which was further condensed with either salicylaldehyde or naphthaldehyde to yield the ligands H 3 L 1 and H 3 L 2 which possess two dissimilar coordination sites, an inner four-coordinate N 2 O 2 donor set and an outer three-coordinated O 2 O set. 1 H NMR and IR spectra indicate that the Ni(II) and Cu(II) ions are bonded to the inner N 2 O 2 sites of the ligands leaving their outer O 2 O sites vacant for further coordination. Different types of products were obtained according to the type of metal ion. These products differ in stoichiometry according to the type of ligand in the parent compound. Electronic spectra and magnetic moments indicate that the structures of the parent Ni(II) and Cu(II) complexes are square-planar while the geometry around Fe(III), Mn(II) and Co(II) in their products are octahedral as elucidated from IR, UV-visible, ESR, 1 H NMR, mass spectrometry and magnetic moments.     

Reactive intermediates relevant to the carbonylation of CH(3)Mn(CO)(5). Activation parameters for key dynamic processes

Reported is a time-resolved infrared and optical kinetics investigation of the transient species CH(3)C(O)Mn(CO)(4) (I(Mn)) generated by flash photolysis of the acetyl manganese pentacarbonyl complex CH(3)C(O)Mn(CO)(5) (A(Mn)) in cyclohexane and in tetrahydrofuran. Activation parameters were determined for CO trapping of I(Mn) to regenerate A(Mn) (rate = k(CO) [CO][I(Mn)]) as well as the methyl migration pathway to form methylmanganese pentacarbonyl CH(3)Mn(CO)(5) (M(Mn)) (rate = k(M)[I(Mn)]). These values were Delta H(++)(CO) = 31 +/- 1 kJ mol(-1), Delta S(++)(CO) = -64 +/- 3 J mol(-1) K(-1), Delta H(++)(M) = 35 +/- 1 kJ mol(-1), and Delta S(++)(M) = -111 +/- 3 J mol(-1) K(-1). Substantially different activation parameters were found for the methyl migration kinetics of I(Mn) in THF solutions where Delta H(++)(M) = 68 +/- 4 kJ mol(-1) and Delta S(++)(M) = 10 +/- 10 J mol(-1) K(-1), consistent with the earlier conclusion (Boese, W. T.; Ford, P. C. J. Am. Chem. Soc. 1995, 117, 8381-8391) that the composition of I(Mn) is different in these two media. The possible isotope effect on k(M) was also evaluated by studying the intermediates generated from flash photolysis of CD(3)C(O)Mn(CO)(5) in cyclohexane, but this was found to be nearly negligible (k(M)(h)/k(M)(d) (298 K) = 0.97 +/- 0.05, Delta H(++)(M)(d) = 37 +/- 4 kJ mol(-1), and Delta S(++)(M)(d) = -104 +/- 12 J mol(-1) K(-1)). The relevance to the migratory insertion mechanism of CH(3)Mn(CO)(5), a model for catalytic carbonylations, is discussed.     

1-乙酰基-3-(2-羟基-4,6-二甲氧基苯基)-5-芳基-2-吡唑啉的合成及Cu2+荧光探针行为

设计合成了6个1-乙酰基-3-(2-羟基-4,6二甲氧基苯基)-5-芳基-2-吡唑啉化合物4a～4f.测试了它们的紫外光谱和荧光光谱,研究了其对铜离子的选择性识别作用.结果表明,化合物4f作为铜离子荧光探针,受常见离子干扰较小,对于铜离子有着较高的选择性和较低的检出限.     

Broadly hysteretic H2 adsorption in the microporous metal-organic framework Co(1,4-benzenedipyrazolate)

Reaction of Co(CF3SO3)2 with the new molecule 1,4-benzenedi(4'-pyrazolyl) (H2BDP) in N,N'-diethylformamide (DEF) at 130 degrees C generates the metal-organic framework Co(BDP).2DEF.H2O (1). X-ray analysis reveals the structure of 1 to contain chains of tetrahedrally ligated Co2+ ions linked through BDP2- ligands to generate a three-dimensional framework with 10 x 10 A2 channels. Thermogravimetric data shows the framework to have a high thermal stability, and complete desolvation occurs upon heating at 170 degrees C under dynamic vacuum for two days to afford 1d. X-ray powder diffraction data indicates that 1d possesses a substantially different structure, but converts back to 1 upon exposure to DEF, consistent with the presence of a flexible framework. Nitrogen adsorption isotherms measured for 1d at 77 and 87 K reveal an unprecedented five-step adsorption process and a Langmuir surface area of 2670 m2/g. In addition, high-pressure H2 adsorption data reveal hysteretic uptake and release, with hysteresis loops of width 1.1, 3.8, 13, and 27 bar that shift to higher pressures as the temperature increases from 50 to 65, 77, and 87 K, respectively. The high H2 uptake capacity of 5.5 excess wt % at 50 K suggests that such materials could potentially find utility for hydrogen storage via a kinetic trapping mechanism. Variable-temperature kinetics measurements have also allowed the first study of H2 diffusion within a metal-organic framework, revealing an energy barrier of 0.62 kJ/mol for H2 diffusing within the pores.     

Co(3)[Co(CN)(5)](2): a microporous magnet with an ordering temperature of 38 K

The reaction between [Co(H2O)6]2+ and [Co(CN)5]3- in deoxygenated water yields a dark blue solid of composition Co3[Co(CN)5]2.8H2O (1). X-ray powder diffraction data indicate a cubic Prussian blue-type framework, wherein the hexacyanometalate positions have only a two-thirds occupancy of square-pyramidal [Co(CN)5]3- units. Upon dehydration, the compound retains crystallinity and exhibits a Type I dinitrogen sorption isotherm, characteristic of a microporous solid. Magnetic measurements show 1 to behave as a ferrimagnet with an ordering temperature of 48 K, which is reduced to 38 K in the dehydrated solid. At 5 K, both 1 and dehydrated 1 exhibit magnetic hysteresis with a coercive field of 1160 G (the highest value yet reported for a cubic Prussian blue analogue) and remnant magnetizations of 1540 and 745 cm3G/mol, respectively. Thus, dehydrated 1 represents the first compound for which microporosity and long-range magnetic ordering have been demonstrated to coexist.     

1-乙酰基-3-(2-羟基-4,6-二甲氧基苯基)-5-苯基-2-吡唑啉的合成及锌离子探针的研究

设计合成了1-乙酰基-3-(2-羟基-4,6-二甲氧基苯基)-5-苯基-2-吡唑啉(4), 测试了其紫外光谱和荧光光谱, 研究了其对锌离子的选择性识别作用. 结果表明, 化合物4作为锌离子荧光探针, 受常见离子的干扰较小, 对于锌离子有着较高的选择性和较低的检出限.     

A density functional theory study of molecular and dissociative adsorption of H2 on active sites in mordenite

Adsorption and chemisorption of H2 in mordenite is studied using ab initio density functional theory (DFT) calculations. The geometries of the adsorption complex, the adsorption energies, stretching frequencies, and the capacity to dissociate the adsorbed molecule are compared for different active sites. The active centers include a Br?nsted acid site, a three-coordinated surface Al site, and Lewis sites formed by extraframework cations: Na+, Cu+, Ag+, Zn2+, Cu2+, Ga3+, and Al3+. Adsorption properties of cations are compared for a location of the cation in the five-membered ring. This location differs from the location in the six-membered ring observed for hydrated cations. The five-membered ring, however, represents a stable location of the bare cation. In this position any cation exhibits higher reactivity compared with the location in the six-membered ring and is well accessible by molecules adsorbed in the main channel of the zeolite. Calculated adsorption energies range from 4 to 87 kJ/mol, depending on electronegativity and ionic radius of the cation and the stability of the cation-zeolite complex. The largest adsorption energy is observed for Cu+ and the lowest for Al3+ integrated into the interstitial site of the zeolite framework. A linear dependence is observed between the stretching frequency and the bond length of the adsorbed H2 molecule. The capacity of the metal-exchanged zeolite to dissociate the H2 molecule does not correlate with the adsorption energy. Dissociation is not possible on single Cu+ cation. The best performance is observed for the Ga3+, Zn2+, and Al3+ extraframework cations, in good agreement with experimental data.     

Adsorption properties of HKUST-1 toward hydrogen and other small molecules monitored by IR

Among microporous systems metal organic frameworks are considered promising materials for molecular adsorption. In this contribution infrared spectroscopy is successfully applied to highlight the positive role played by coordinatively unsaturated Cu2+ ions in HKUST-1, acting as specific interaction sites. A properly activated material, obtained after solvent removal, is characterized by a high fraction of coordinatively unsaturated Cu2+ ions acting as preferential adsorption sites that show specific activities towards some of the most common gaseous species (NO, CO2, CO, N2 and H2). From a temperature dependent IR study, it has been estimated that the H2 adsorption energy is as high as 10 kJ mol(-1). A very complex spectral evolution has been observed upon lowering the temperature. A further peculiarity of this material is the fact that it promotes ortho-para conversion of the adsorbed H2 species.