Controlling the Emergence and Shift Direction of Mechanochromic Luminescence Color of a Pyridine‐Terminated Compound

In this study, mechanochromic luminescence was induced in a complex of mechano‐inactive compounds. Dye/acid complexes containing the same π‐conjugated backbones were prepared. While the luminophore showed blue and red shifts in photoluminescence spectra when combined with different acids by grinding, it exhibited slight mechanoresponsiveness itself. Also, compounds with similar molecular backbones to the dye/acid complex were synthesized to clarify the color change mechanism. The compounds showed both blue and red shifts in photoluminescence and diffuse reflectance spectra upon grinding, indicating that mechanochromic luminescence in the hydrogen‐bonded complex is like its monomeric analogue and that aggregation structure plays an important role in mechanoresponsive behavior rather than the π‐conjugated structure. It was shown that a color change can be mechanically induced by imitating the solid‐state aggregation structure of other mechanoresponsive compounds without synthetic modification.     

Mechanochromic Behavior of Aryl‐Substituted Buta‐1,3‐Diene Derivatives with Aggregation Enhanced Emission

Three tetra‐aryl substituted 1,3‐butadiene derivatives with aggregation enhanced emission (AEE) and mechanochromic fluorescence behavior have been rationally designed and synthesized. The results suggest an effective design strategy for developing diverse materials with aggregation induced emission (AIE) and significant mechanochromic performance by employing D ‐π‐A structures with large dipole moments.     

Mechanochromic Luminescence from Crystals Consisting of Intermolecular Hydrogen‐Bonded Sheets

Introduction of functional groups that can form intermolecular hydrogen bonds into highly‐emissive luminophores is a promising way to induce mechanochromic luminescence. Herein, we report that a 9,10‐bis(phenylethynyl)anthracene derivative featuring two amide groups forms green‐emissive crystals based on two‐dimensional hydrogen‐bonded molecular sheets. Mechanical grinding changed the emission from green to yellow, owing to a transition from a crystalline to an amorphous phase. Infrared spectroscopy revealed that mechanical stimuli disrupted the linear hydrogen‐bonding formation. A thermal treatment recovered the original green photoluminescence.     

Reversible Phase Transformation and Mechanochromic Luminescence of ZnII‐Dipyridylamide‐Based Coordination Frameworks

A 1D double‐zigzag framework, {[Zn(paps)₂(H₂O)₂](ClO₄)₂}_n ( 1 ; paps=N,N′‐bis(pyridylcarbonyl)‐4,4′‐diaminodiphenyl thioether), was synthesized by the reaction of Zn(ClO₄)₂ with paps. However, a similar reaction, except that dry solvents were used, led to the formation of a novel 2D polyrotaxane framework, [Zn(paps)₂(ClO₄)₂]_n ( 2 ). This difference relies on the fact that water coordinates to the Zn^II ion in 1 , but ClO₄^? ion coordination is found in 2 . Notably, the structures can be interconverted by heating and grinding in the presence of moisture, and such a structural transformation can also be proven experimentally by powder and single‐crystal X‐ray diffraction studies. The related N,N′‐bis‐ (pyridylcarbonyl)‐4,4′‐diaminodiphenyl ether (papo) and N,N′‐(methylenedi‐para‐phenylene)bispyridine‐4‐carboxamide (papc) ligands were reacted with Zn^II ions as well. When a similar reaction was performed with dry solvents, except that papo was used instead of paps, the product mixture contained mononuclear [Zn(papo)(CH₃OH)₄](ClO₄)₂ ( 5 ) and the polyrotaxane [Zn(papo)₂(ClO₄)₂]_n ( 4 ). From the powder XRD data, grinding this mixture in the presence of moisture resulted in total conversion to the pure double‐zigzag {[Zn(papo)₂(H₂O)₂](ClO₄)₂}_n ( 3 ) immediately. Upon heating 3 , the polyrotaxane framework of 4 was recovered. The double‐zigzag {[Zn(papc)₂(H₂O)₂](ClO₄)₂}_n ( 6 ) and polyrotaxane [Zn(papc)₂(ClO₄)₂]_n ( 7 ) were synthesized in a similar reaction. Although upon heating the double‐zigzag 6 undergoes structural transformation to give the polyrotaxane 7 , grinding solid 7 in the presence of moisture does not lead to the formation of 6 . Significantly, the bright emissions for double‐zigzag frameworks of 1 and 3 and weak ones for polyrotaxane frameworks of 2 and 4 also show interesting mechanochromic luminescence.     

Mechanochromic Luminescence of Copper Iodide Clusters

Luminescent mechanochromic materials are particularly appealing for the development of stimuli‐responsive materials. Establishing the mechanism responsible for the mechanochromism is always an issue owing to the difficulty in characterizing the ground phase. Herein, the study of real crystalline polymorphs of a mechanochromic and thermochromic luminescent copper iodide cluster permits us to clearly establish the mechanism involved. The local disruption of the crystal packing induces changes in the cluster geometry and in particular the modification of the cuprophilic interactions, which consequently modify the emissive states. This study constitutes a step further toward the understanding of the mechanism involved in the mechanochromic luminescent properties of multimetallic coordination complexes.     

Bismuth‐Based Coordination Polymers with Efficient Aggregation‐Induced Phosphorescence and Reversible Mechanochromic Luminescence

Two bismuth coordination polymers (CPs), (TBA)[BiBr₄(bp4mo)] (TBA=tetrabutylammonium) and [BiBr₃(bp4mo)₂], which are based on the rarely used simple ditopic ligand N‐oxide‐4,4′‐bipyridine (bp4mo), show mechanochromic luminescence (MCL). High solid‐state phosphorescence quantum yields of up to 85 % were determined for (TBA)[BiBr₄(bp4mo)] (λ_em=540 nm). Thorough investigations of the luminescence properties combined with DFT and TDDFT calculations revealed that the emission is due to aggregation‐induced phosphorescence (AIP). Upon grinding, both samples became amorphous, and their luminescence changed from yellow to orange and red, respectively. Heating or exposure to water vapor led to the recovery of the initial luminescence. These materials are the first examples of mechanochromic phosphors based on bismuth(III).     

Unique Substitution Effect at 5,5′‐Positions of Fused Azobenzene–Boron Complexes with a N=N π‐Conjugated System

A recent report illustrated superior optical properties, such as near‐infrared emission, of polymers connected at the 4,4′‐positions to a fused azobenzene–boron complex (BAz). In this study, it is initially demonstrated that further narrowing of the band gap can be realized through the substituent effect with bromine groups at the 5,5′‐positions of BAz compared with those at the 4,4′‐positions. From a series of mechanistic studies, perturbation of the energy levels was rationally explained by the difference in contributions of the inductive effect and the variable resonance effect, which was correlated with the degree of electron distribution of molecular orbitals at the substituent positions. Moreover, it was found that unique electronic states, such as delocalized HOMOs and LUMOs, should appear on the main chains of the BAz‐containing copolymers with fluorene and bithiophene units, according to the optical and electrochemical data and theoretical calculations. By taking advantage of property tunability and the dramatically low LUMO energy level (near ?4.0 eV) of the BAz unit, it can be said that BAz should be a conjugated building block favorable for building advanced optoelectronic devices.     

N‐Substituted Dicyanomethylphenyl Radicals: Dynamic Covalent Properties and Formation of Stimuli‐Responsive Cyclophanes by Self‐Assembly

Dynamic covalent bonds and their chemistry have been of particular interest both from a fundamental and materials science aspect. Demonstrated herein is that triphenylamine (TPA) and carbazole (Cz), substituted with a dicyanomethyl radical, are useful motifs for dynamic covalent chemistry as they have the appropriate bond strength between monomer units as well as high stability and synthetic simplicity. TPA and Cz units substituted by two dicyanomethyl radicals formed macrocyclic oligomers classified as novel types of azacyclophanes, and in particular, the TPA‐based diradical gave a cyclic dimer in almost quantitative yield. The cyclic oligomers exhibited thermo‐ and mechanochromic behavior resulting from the generation of radical species by intermonomer C?C bond cleavage.     

Dramatic Substituent Effects on the Photoluminescence of Boron Complexes of 2‐(Benzothiazol‐2‐yl)phenols

Substituents can induce dramatic changes in the photoluminescence properties of N,O‐chelated boron complexes. Specifically, the boron complexes of 2‐(benzothiazol‐2‐yl)phenols become bright deep blue‐ and orange‐red‐emitting materials depending on amino substituents at the 5‐ and 4‐positions of 2‐(benzothiazol‐2‐yl)phenol, respectively. Absorption and emission data show that the resulting boron complexes have little or small overlap between the absorption and emission spectra and, furthermore, X‐ray crystal structures for both the blue and orange‐red complexes indicate the absence of π–π stacking interaction in the crystal‐packing structures. These features endow the boron complexes with bright and strong photoluminescence in the solid state, which distinguishes itself from the typical boron complexes of dipyrromethenes (BODIPYs). A preliminary study indicates that the blue complexes have promising electro‐optical characteristics as dopant in an organic light‐emitting diode (OLED) device and show chromaticity close to an ideal deep blue. The substituent effects on the photoluminescent properties may be used to tune the desired emission wavelength of related boron or other metal complexes.     

N‐Boc‐Indolylbenzothiadiazole Derivatives: Efficient Full‐Color Solid‐State Fluorescence and Self‐Recovering Mechanochromic Luminescence

Herein, the solid‐state emission with good fluorescence quantum yields of N‐Boc‐indolylbenzothiadiazoles as a new class of fluorophores is described. Their solid‐state emission covers the wide range of the visible spectrum and the emission color can be tuned easily by changing the substituents on the two heteroaromatic rings. Among these, 3‐methylindolyl derivatives exhibit moreover autonomously self‐recovering mechanochromic luminescence, whereby the original solid‐state emission could be recovered spontaneously at room temperature after exposure to a mechanical stimulus. The emission color, as well as the recovery time for the color change could be tuned via the introduction of different substituents on the benzothiadiazole ring. We propose that the mechanism of the autonomously self‐recovering mechanochromic luminescence of 3‐methylindolylbenzothiadiazoles is based on a partial amorphization of the crystals upon exposure to the mechanical stimulus, followed by autonomous recovering in the form of recrystallization.     

N‐Substituted Azacalixphyrins: Synthesis,Properties, and Self‐Assembly

Pre‐ and postintroduction of substituents with respect to the macrocyclization step leads to previously unknown N‐substituted azacalixphyrins. The stepwise synthetic approach has been studied in detail to highlight the key role of the N‐substituents of the precursors and/or intermediates in terms of reactivity. Based on a combined experimental and theoretical investigation, the relationship between the properties of the macrocycles and their degree of substitution is rationalized. Depending on the nature of the N‐substituents, the formation of supramolecular ribbon‐like structures could also be observed, as demonstrated by combined TEM, SEM, AFM, and FTIR experiments.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Synthesis and Properties of Salen–Aluminum Complexes as a Novel Class of Color‐Tunable Luminophores

Showing their true colors? Full emission color tuning in the visible region can be achieved with salen–aluminum complexes that are electronically modulated at C5 of the phenoxide ring in the salen moiety. Emission spectra for various substituents R⁵ are shown (EWG: electron‐withdrawing group, EDG: electron‐donating group).

     

Probing the Rotational Dynamics of meso‐(2‐Substituted)aryl Substituents in A2B‐Type Subporphyrins

A₂B‐type B‐methoxy subporphyrins 3 a – g and B‐phenyl subporphyrins 7 a – c , e , g bearing meso‐(2‐substituted)aryl substituents are synthesized, and their rotational dynamics are examined through variable‐temperature (VT) ¹H NMR spectroscopy. In these subporphyrins, the rotation of meso‐aryl substituents is hindered by a rationally installed 2‐substituent. The rotational barriers determined are considerably smaller than those reported previously for porphyrins. Comparison of the rotation activation parameters reveals a variable contribution of ΔH^≠ and ΔS^≠ in ΔG^≠. 2‐Methyl and 2‐ethyl groups of the meso‐aryl substituents in subporphyrins 3 e , 3 f , and 7 e induce larger rotational barriers than 2‐alkoxyl substituents. The rotational barriers of 3 g and 7 g are reduced by the presence of the 4‐dibenzylamino group owing to its ability to stabilize the coplanar rotation transition state electronically. The smaller rotational barriers found for B‐phenyl subporphyrins than for B‐methoxy subporphyrins indicate a negligible contribution of S_N1‐type heterolysis in the rotation of meso‐aryl substituents.     

Immobilization of Styrene‐Substituted 1,3,4‐Oxadiazoles into Thermoreversible Luminescent Organogels and Their Unexpected Photocatalyzed Rearrangement

A series of styrene‐substituted 1,3,4‐oxadiazoles has been designed and investigated as new low‐molecular‐weight organogelators. The photophysical properties of the resulting thermoreversible organogels have been characterized by UV/Vis absorption and luminescence spectroscopies. Surprisingly, the gelation ability of the oxadiazoles depended on the presence of the styrene moiety as gelation of the investigated oxadiazoles did not take place in its absence. Gel formation was accompanied by a modification of the fluorescence of the organogelators in the supramolecular state. UV irradiation of the gels caused a rearrangement of the immobilized 1,3,4‐oxadiazoles bearing a styrene moiety by a tandem [4+2] and [3+2] cascade reaction. Structure modification and color change of the gels were also evident upon irradiation.     

Evaluation of Anisole‐Substituted Boron Difluoride Formazanate Complexes for Fluorescence Cell Imaging

Evaluation of three subclasses of boron difluoride formazanate complexes bearing o‐, m‐, and p‐anisole N‐aryl substituents (Ar) as readily accessible alternatives to boron dipyrromethene (BODIPY) dyes for cell imaging applications is described. While the wavelengths of maximum absorption (λ_max) and emission (λ_em) observed for each subclass of complexes, which differed by their carbon‐bound substituents (R), were similar, the emission quantum yields for 7 a – c (R=cyano) were enhanced relative to 8 a – c (R=nitro) and 9 a – c (R=phenyl). Complexes 7 a – c and 8 a – c were also significantly easier to reduce electrochemically to their radical anion and dianion forms compared to 9 a – c . Within each subclass, the o‐substituted derivatives were more difficult to reduce, had shorter λ_max and λ_em, and lower emission quantum yields than the p‐substituted analogues as a result of sterically driven twisting of the N‐aryl substituents and a decrease in the degree of π‐conjugation. The m‐substituted complexes were the least difficult to reduce and possessed intermediate λ_max, λ_em, and quantum yields. The complexes studied also exhibited large Stokes shifts (82–152 nm, 2143–5483 cm^?1). Finally, the utility of complex 7 c (Ar=p‐anisole, R=cyano), which can be prepared for just a few dollars per gram, for fluorescence cell imaging was demonstrated. The use of 7 c and 4′,6‐diamino‐2‐phenylindole (DAPI) allowed for simultaneous imaging of the cytoplasm and nucleus of mouse fibroblast cells.     

Mechanochromic Luminescence Characteristics of Pyridine‐Terminated Chromophores in the Solid State and in a Poly(vinyl alcohol) Matrix

Mechanoresponsive luminophores containing different substituted pyridine rings at the molecular terminus are synthesized and their photoluminescence properties are investigated. The solid chromophore with a 4‐substituted pyridine ring exhibits a reversible photoluminescent color change, while the 2‐substituted chromophore shows only a small change in luminescence, and the 3‐substituted chromophore displays an irreversible photoluminescent color change with mechanical grinding. A change of the sample color in response to mechanical grinding is also achieved for a dye‐dispersed poly(vinyl alcohol) film. Furthermore, a simultaneous acid and mechanoresponsive photoemission color change is achieved in the dye‐dispersed film.