Kinetic Study of Peroxidase‐Catalyzed Coupling of Benzene‐1,4‐diamine and N‐(2‐Aminoethyl)naphthalen‐1‐amine: Development of Micromolar Hydrogen Peroxide Reaction System

A novel chromogenic method to measure the peroxidase activity using para‐phenylenediamine dihydrochloride (=benzene‐1,4‐diamine hydrochloride; PPDD) and N‐(1‐naphthyl)ethylenediamine dihydrochloride (=N‐(2‐aminoethyl)naphthalen‐1‐amine; NEDA) is presented. The PPDD entraps the free radical and gets oxidized to electrophilic diimine, which couples with NEDA to give an intense red‐colored chromogenic species with maximum absorbance at 490 nm. This assay was adopted for the quantification of H₂O₂ between 20 and 160 μM . Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 4.47×10⁴ M ^?1 min^?1 and 3.38×10^?4 min^?1, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the co‐substrates were 0.0245×10³ min^?1 and 0.0445 μM ^?1 min^?1, respectively. The chromogenic coupling reaction has a minimum interference from the reducing substances such as ascorbic acid, L ‐cystein, citric acid, and oxalic acid. The method being simple, rapid, precise, and sensitive, its applicability has been tested in the crude vegetable extracts that showed peroxidase activity.     

2-甲基-2-丁醇的低温热容和热力学性质

本文用精密自动绝热量热仪测定了2-甲基-2-丁醇在80～305 K温区的热容,从热容曲线(Cp-T) 发现三个固－固相变和一个固－液相变, 其相变温度分别为T = 146.355, 149.929, 214.395, 262.706 K。从实验热容数据用最小二乘法得到以下四个温区的热容拟合方程。在80～140K温区, Cp,m = 39.208 + 8.0724X - 1.9583X2 + 10.06X3 + 1.799X4 - 7.2778X5 + 1.4919X6, 折合温度X = (T –110) / 30; 在 155 ～ 210 K温区, Cp,m = 70.701 + 10.631X + 12.767X2 + 0.3583X3 - 22.272X4 - 0.417X5 + 12.055X6, X = (T –182.5) /27.5; 在220 ～ 250 K温区, Cp,m = 99.176 + 7.7199X - 26.138X2 + 28.949X3 + 0.7599X4 - 25.823X5 + 21.131X6, X = (T – 235)/15; 在 270～305 K温区, Cp,m =121.73 + 16.53 X- 1.0732X2 - 34.937X3 - 19.865X4 + 24.324X5 + 18.544X6, X = (T –287.5)/17.5。从实验热容计算出相变焓分别为0.9392, 1.541, 0.6646, 2.239 kJ×mol-1; 相变熵分别为6.417, 10.28, 3.100, 8.527 J×K-1×mol-1。根据热力学函数关系式计算出80～305 K温区每隔5 K的热力学函数值 [HT –H298.15]和 [ST –S298.15]。     

Structural Characterization and Thermal Behavior of 1-Amino-1-methylamino-2,2-dinitroethylene

A novel high energetic material, 1‐amino‐1‐methylamino‐2,2‐dinitroethylene (AMFOX‐7), was synthesized through 1,1‐diamino‐2,2‐dinitroethylene (FOX‐7) reacting with methylamine in N‐methyl pyrrolidone (NMP) at 80.0°C, and its structure was determined by single crystal X‐ray diffraction. The crystal is monoclinic, space group P2₁/m with crystal parameters of a=6.361(3) Å, b=7.462(4) Å, c=6.788(3) Å, β=107.367(9)°, V=307.5(3) ų, Z=2, µ=0.160 mm^?1, F(000)=168, D_c=1.751 g·cm^?3, R₁=0.0463 and wR₂=0.1102. Thermal decomposition of AMFOX‐7 was studied, and the enthalpy, apparent activation energy and pre‐exponential constant of the exothermic decomposition reaction are 303.0 kJ·mol^?1, 230.7 kJ·mol^?1 and 10^21.03 s^?1, respectively. The critical temperature of thermal explosion is 245.3°C. AMFOX‐7 has higher thermal stability than FOX‐7.     

Non-isothermal Decomposition Kinetics, Specific Heat Capac-ity and Adiabatic Time-to-explosion of a High Energy Material: 4,6-Bis(5-amino-3-nitro-1,2,4-triazol-1-yl)-5-nitropyrimidine

The thermal behavior of 4,6‐bis‐(5‐amino‐3‐nitro‐1,2,4‐triazol‐1‐yl)‐5‐nitropyrimidine (BANTNP) was studied under a non‐isothermal condition by DSC, PDSC and TG/DTG methods. The kinetic parameters (E_a and A) of the exothermic decomposition reaction are 304.52 kJ·mol^?1 and 10^24.47 s^?1 at 0.1 MPa, 272.52 kJ·mol^?1 and 10^21.76 s^?1 at 5.0 MPa, respectively. The kinetic equation at 0.1 MPa can be expressed as: dα/dT=10^25.3(1?α)^3/4exp(?3.8044×10⁴/T)/β The critical temperature of thermal explosion is 588.28 K. The specific heat capacity of BANTNP was determined with a Micro‐DSC method, and the standard molar specific heat capacity is 397.54 J·mol^?1·K^?1 at 298.15 K. The adiabatic time‐to‐explosion of BANTNP was calculated to be 11.75 s.     

Molecular Structure,Theoretical Calculation and Thermal Behavior of DAG(NTO)

A new compound, [DAG(NTO)], was prepared by mixing the NaNTO•H2O aqueous solution and diaminogaunidine hydrochloride aqueous solution. Single crystals suitable for X-ray measurement were obtained by recrystallization from water at room temperature. The crystal belongs to triclinic, space group P-1 with crystal parameters of a＝0.6732(3) nm, b＝0.6745(3) nm, c＝0.9840(4) nm, α＝88.309(7)°, β＝77.255(6)°, γ＝86.520(7)°, V＝4.349(3) nm3, Z＝2, μ＝0.144 mm－1, F(000)＝228, and Dc＝1.674 g/cm3. The theoretical investigation on DAG(NTO) as a structural unit was carried out by B3LYP, MP2 and HF methods with 6-31＋G(d) basis set. The apparent activation energy and pre-exponential constant of the exothermic decomposition reaction of DAG(NTO) are 112.15 kJ•mol－1 and 109.603 s－1, respectively. The critical temperature of thermal explosion is 208.6 ℃.     

Flow‐Injection Spectrophotometric Determination of N‐acetylcysteine in Pharmaceutical Formulations with On‐Line Solid‐Phase Reactor Containing Zn(II) Phosphate Immobilized in a Polyester Resin

Abstract

A flow‐injection spectrophotometric procedure was developed for determining N‐acetylcysteine in pharmaceutical formulations. The sample was dissolved in deionized water and 400 µl of the solution was injected into a carrier stream of 1.0×10^?2 mol l^?1 sodium borate solution. The sample flowed through a column (70 mm length×2.0 mm i.d.) packed with Zn₃(PO₄)₂ immobilized in a polymeric matrix of polyester resin and Zn(II) ions were released from the solid‐phase reactor because of the formation of the Zn(II) (N‐acetylcysteine)₂ complex. The mixture merged with a stream of borate buffer solution (pH 9.0) containing 5.0×10^?4 mol l^?1 Alizarin red S and the Zn(II)Alizarin red complex formed was measured spectrophotometrically at 540 nm. The analytical curve was linear in the N‐acetylcysteine concentration range from 3.0×10^?5 to 1.5×10^?4 mol l^?1 (4.9 to 24.5 µg ml^?1) with a detections limit of 8.0×10^?6 mol l^?1 (1.3 µg ml^?1). The relative standard deviations (RSDs) were smaller than 0.5% (n=10) for solutions containing 5.0×10^?5 mol l^?1 (8.0 µg ml^?1) and 8.0×10^?5 mol l^?1 (13.0 µg ml^?1) of N‐acetylcysteine, and the analytical frequency was 60 determinations per hour. A paired t‐test showed that all results obtained for N‐acetylcysteine in commercial formulations using the proposed flow‐injection procedure and a comparative procedure agreed at the 95% confidence level.     

新型三脚架苯甲醛苯腙醋酸根选择性比色化学传感器

本文合成了一个新的基于三脚架苯甲醛苯腙的能够选择地检测醋酸根离子的比色化学传感器1。用紫外可见吸收光谱证实了受体1在二甲基亚砜溶液中对醋酸根离子高选择的键合能力超越了其它阴离子。和其他所研究的阴离子相比,其在二甲基亚砜中紫外可见吸收光谱对具有高选择性醋酸根离子的存在显示了应答,当存在（2´10^-5mol·dm^-3）醋酸根离子时其溶液的颜色也由黄色变化到蓝色。当用其他不同的客体阴离子（F^-, Cl^-, Br^-, I^-, H₂PO₄ ^–和 OH^-）处理受体1时,仅出现了很小的紫外可见吸收光谱变化。受体1对醋酸根的结合常数 K_ass为1.69´ 10⁴。     

One‐Dimensional Ferromagnetically Coupled Bimetallic Chains Constructed with trans‐[Ru(acac)2(CN)2]−: Syntheses,Structures, Magnetic Properties,and Density Functional Theoretical Study

Four cyano‐bridged 1D bimetallic polymers have been prepared by using the paramagnetic building block trans‐[Ru(acac)₂(CN)₂]^? (Hacac=acetylacetone): {[{Ni(tren)}{Ru(acac)₂(CN)₂}][ClO₄]?CH₃OH}_n ( 1 ) (tren=tris(2‐aminoethyl)amine), {[{Ni(cyclen)}{Ru(acac)₂(CN)₂}][ClO₄]? CH₃OH}_n ( 2 ) (cyclen=1,4,7,10‐tetraazacyclododecane), {[{Fe(salen)}{Ru(acac)₂(CN)₂}]}_n ( 3 ) (salen^2?=N,N′‐bis(salicylidene)‐o‐ethyldiamine dianion) and [{Mn(5,5′‐Me₂salen)}₂{Ru(acac)₂(CN)₂}][Ru(acac)₂(CN)₂]? 2 CH₃OH ( 4 ) (5,5′‐Me₂salen=N,N′‐bis(5,5′‐dimethylsalicylidene)‐o‐ethylenediimine). Compounds 1 and 2 are 1D, zigzagged NiRu chains that exhibit ferromagnetic coupling between Ni^II and Ru^III ions through cyano bridges with J=+1.92 cm^?1, z J′=?1.37 cm^?1, g=2.20 for 1 and J=+0.85 cm^?1, z J′=?0.16 cm^?1, g=2.24 for 2 . Compound 3 has a 1D linear chain structure that exhibits intrachain ferromagnetic coupling (J=+0.62 cm^?1, z J′=?0.09 cm^?1, g=2.08), but antiferromagnetic coupling occurs between FeRu chains, leading to metamagnetic behavior with T_N=2.6 K. In compound 4 , two Mn^III ions are coordinated to trans‐[Ru(acac)₂(CN)₂]^? to form trinuclear Mn₂Ru units, which are linked together by π–π stacking and weak Mn???O* interactions to form a 1D chain. Compound 4 shows slow magnetic relaxation below 3.0 K with ?=0.25, characteristic of superparamagnetic behavior. The Mn^III???Ru^III coupling constant (through cyano bridges) and the Mn^III???Mn^III coupling constant (between the trimers) are +0.87 and +0.24 cm^?1, respectively. Compound 4 is a novel single‐chain magnet built from Mn₂Ru trimers through noncovalent interactions. Density functional theory (DFT) combined with the broken symmetry state method was used to calculate the molecular magnetic orbitals and the magnetic exchange interactions between Ru^III and M (M=Ni^II, Fe^III, and Mn^III) ions. To explain the somewhat unexpected ferromagnetic coupling between low‐spin Ru^III and high‐spin Fe^III and Mn^III ions in compounds 3 and 4 , respectively, it is proposed that apart from the relative symmetries, the relative energies of the magnetic orbitals may also be important in determining the overall magnetic coupling in these bimetallic assemblies.     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .     

Study on Dynamic Interfacial Tension of 3‐Dodecyloxy‐2‐hydroxypropyl Trimethyl Ammonium Chloride at n‐Decane/Water Interface

Dynamic interfacial tension (DIT) and interface adsorption kinetics at the n‐decane/water interface of 3‐dodecyloxy‐2‐hydroxypropyl trimethyl ammonium chloride (R₁₂TAC) were measured using spinning drop method. The effects of R_nTAC concentration and temperature on DIT have been investigated, the reason of the change of DIT with time has been discussed. The effective diffusion coefficient, D _a, and the adsorption barrier, ?_a, have been obtained with extended Word‐Tordai equation. The results show that the higher the concentration of surfactants is, and the smaller will be the DIT and the lower will be the curve of the DIT, and the R₁₂TAC solutions follow a mixed diffusion‐activation adsorption mechanism in this investigation. With increase of concentration in bulk solution of R₁₂TAC from 8×10^?4 mol · dm^?3 to 4×10^?3 mol · dm^?3, D _a decreases from 2.02×10^?10 m^?2 · s^?1 to 1.4×10^?11 m^?2 · s^?1 and ? _a increases from 2.60 kJ · mol^?1 to 9.32 kJ · mol^?1, while with increase of temperature from 30°C to 50°C, D _a increases from 2.02×10^?10 m^?2 · s^?1 to 5.86×10^?10 m^?2 · s^?1 and ε_a decreases from 2.60 kJ · mol^?1 to 0.73 kJ · mol^?1. This indicates that the diffusion tendency becomes weak with increase strength of the interaction between surfactant molecules and that the thermo‐motion of molecules favors interface adsorption.     

Highly Stereoselective β‐Mannopyranosylation via the 1‐α‐Glycosyloxy‐isochromenylium‐4‐gold(I) Intermediates

While the gold(I)‐catalyzed glycosylation reaction with 4,6‐O‐benzylidene tethered mannosyl ortho‐alkynylbenzoates as donors falls squarely into the category of the Crich‐type β‐selective mannosylation when Ph₃PAuOTf is used as the catalyst, in that the mannosyl α‐triflates are invoked, replacement of the ^?OTf in the gold(I) complex with less nucleophilic counter anions (i.e., ^?NTf₂, ^?SbF₆, ^?BF₄, and ^?BAr₄^F) leads to complete loss of β‐selectivity with the mannosyl ortho‐alkynylbenzoate β‐donors. Nevertheless, with the α‐donors, the mannosylation reactions under the catalysis of Ph₃PAuBAr₄^F (BAr₄^F=tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate) are especially highly β‐selective and accommodate a broad scope of substrates; these include glycosylation with mannosyl donors installed with a bulky TBS group at O3, donors bearing 4,6‐di‐O‐benzoyl groups, and acceptors known as sterically unmatched or hindered. For the ortho‐alkynylbenzoate β‐donors, an anomerization and glycosylation sequence can also ensure the highly β‐selective mannosylation. The 1‐α‐mannosyloxy‐isochromenylium‐4‐gold(I) complex ( Cα ), readily generated upon activation of the α‐mannosyl ortho‐alkynylbenzoate ( 1 α ) with Ph₃PAuBAr₄^F at ?35 °C, was well characterized by NMR spectroscopy; the occurrence of this species accounts for the high β‐selectivity in the present mannosylation.     

Nanostructured Cobalt(II) Tetracarboxyphthalocyanine Complex Supported Within the MWCNT Frameworks: Electron Transport and Charge Storage Capabilities

The electrochemical redox properties of a surface‐confined thin solid film of nanostructured cobalt(II) tetracarboxyphthalocyanine integrated with multiwalled carbon nanotube (nanoCoTCPc/MWCNT) have been investigated. This novel nanoCoTCPc/MWCNT material was characterized using SEM, TEM, zeta analysis and electrochemical methods. The nanoCoTCPc/MWCNT nanohybrid material exhibited an extra‐ordinarily high conductivity (15 mS cm^?1), which is more than an order of magnitude greater than that of the MWCNT‐SO₃H (527 µS cm^?1) and three orders of a magnitude greater than the nanoCoTCPc (4.33 µS cm^?1). The heterogeneous electron transfer rate constant decreases as follows: nanoCoTCPc/MWCNT (k_app≈19.73×10^?3 cm s^?1)>MWCNT‐SO₃H (k_app≈11.63×10^?3 cm s^?1)>nanoCoTCPc (k_app≈1.09×10^?3 cm s^?1). The energy‐storage capability was typical of pseudocapacitive behaviour; at a current density of 10 µA cm^?2, the pseudocapacitance decreases as nanoCoTCPc/MWCNT (3.71×10^?4 F cm^?2)>nanoCoTCPc (2.57×10^?4 F cm^?2)>MWCNT‐SO₃H (2.28×10^?4 F cm^?2). The new nanoCoTCPc/MWCNT nanohybrid material promises to serve as a potential material for the fabrication of thin film electrocatalysts or energy‐storage devices.     

Theoretical and experimental infrared spectra of hydrated and dehydrated Nafion

The time‐dependent IR spectra during dehydration of fully hydrated Nafion show the reversible disappearance of the 1061 cm^?1 and 969 cm^?1 concurrent with the emergence of peaks at ～928 cm^?1 and ～1408 cm^?1. The first pair of group modes is associated with a dissociated exchange group (sulfonate) with a local C_3V symmetry. The C_3V group modes shift with state‐of‐hydration: The 969 cm^?1 peak completely vanishes and the 1061 cm^?1 is reduced to a small shoulder at 1070 cm^?1 at end of dehydration. The C_3V group modes are replaced by the pair of group modes of an associated exchange group (sulfonic acid) with C₁ local symmetry. The density functional theory normal mode analysis confirms that the sulfonic acid/sulfonate site plays a dominant role in the C₁ and C_3V group modes, respectively. This work clarifies the importance of assigning fluoropolymers peaks as group modes rather than traditional single functional group assignments as is often the case with the ～1061 cm^?1 and ～969 cm^?1 C_3V group modes. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1329–1334     

Synthesis of Pyrazolo[3,4‐d]pyrimidin‐4‐ones Catalyzed by Br?nsted‐acidic Ionic Liquids as Highly Efficient and Reusable Catalysts

A convenient and efficient method for the synthesis of pyrazolo[3,4‐d]pyrimidin‐4‐ones via heterocyclization reaction of 5‐amino‐1H‐pyrazole‐4‐carboxamides with triethyl orthoesters using two Br?nsted‐acidic ionic liquids, 3‐methyl‐1‐(4‐sulfonic acid)butylimidazolium hydrogen sulfate [MIM⁺(CH₂)₄SO₃H][HSO₄^?] or N‐(4‐sulfonic acid)butyl triethylammonium hydrogen sulfate [Et₃N⁺(CH₂)₄SO₃H][HSO₄^?], as efficient homogeneous catalysts under solvent‐free conditions is described.     

Synthesis and characterization of di‐n‐butyltin(IV) complexes with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids: X‐ray crystal structures of [{(n‐C4H9)2Sn(OCOC12H8NO2−4′)}2O]2 and (n‐C4H9)2Sn{OCOC12H8NO2−4′}2

Reactions of di‐n‐butyltin(IV) oxide with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids in 1 : 1 and 1 : 2 stoichiometry yield complexes [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)}₂O]₂ ( 1 and 2 ) and (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)₂ ( 3 and 4 ) respectively. These compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C and ¹¹⁹Sn) spectroscopy. The IR spectra of these compounds indicate the presence of anisobidentate carboxylate groups and non‐linear C? Sn? C bonds. From the chemical shifts δ (¹¹⁹Sn) and the coupling constants ¹J(¹³C, ¹¹⁹Sn), the coordination number of the tin atom and the geometry of its coordination sphere have been suggested. [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)}₂O]₂ ( 1 ) exhibits a dimeric structure containing distannoxane units with two types of tin atom with essentially identical geometry. To a first approximation, the tin atoms appear to be pentacoordinated with distorted trigonal bipyramidal geometry. However, each type of tin atom is further subjected to a sixth weaker interaction and may be described as having a capped trigonal bipyramidal structure. The diffraction study of the complex (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)₂ ( 3 ) shows a six–coordinate tin in a distorted octahedral frame containing bidentate asymmetric chelating carboxylate groups, with the n‐Bu groups trans to each other. The n‐Bu? Sn? n‐Bu angle is 152.8° and the Sn? O distances are 2.108(4) and 2.493(5) Å. The oxygen atom of the nitro group of the ligand does not participate in bonding to the tin atom in 1 and 3 . Crystals of 1 are triclinic with space group P1 and of that of 3 have orthorhombic space group Pnna. Copyright © 2003 John Wiley & Sons, Ltd.     

Decanuclear Ln10 Wheels and Vertex‐Shared Spirocyclic Ln5 Cores: Synthesis,Structure, SMM Behavior,and MCE Properties

The reaction of a Schiff base ligand (LH₃) with lanthanide salts, pivalic acid and triethylamine in 1:1:1:3 and 4:5:8:20 stoichiometric ratios results in the formation of decanuclear Ln₁₀ (Ln=Dy( 1 ), Tb( 2 ), and Gd ( 3 )) and pentanuclear Ln₅ complexes (Ln=Gd ( 4 ), Tb ( 5 ), and Dy ( 6 )), respectively. The formation of Ln₁₀ and Ln₅ complexes are fully governed by the stoichiometry of the reagents used. Detailed magnetic studies on these complexes ( 1 – 6 ) have been carried out. Complex 1 shows a SMM behavior with an effective energy barrier for the reversal of the magnetization (U_eff)=16.12(8) K and relaxation time (τ_o)=3.3×10^?5 s under 4000 Oe direct current (dc) field. Complex 6 shows the frequency dependent maxima in the out‐of‐phase signal under zero dc field, without achieving maxima above 2 K. Complexes 3 and 4 show a large magnetocaloric effect with the following characteristic values: ?ΔS_m=26.6 J kg^?1 K^?1 at T=2.2 K for 3 and ?ΔS_m=27.1 J kg^?1 K^?1 at T=2.4 K for 4 , both for an applied field change of 7 T.     

Anion‐Templated Assembly and Magnetocaloric Properties of a Nanoscale {Gd38} Cage versus a {Gd48} Barrel

The comprehensive study reported herein provides compelling evidence that anion templates are the main driving force in the formation of two novel nanoscale lanthanide hydroxide clusters, {Gd₃₈(ClO₄)₆} ( 1 ) and {Gd₄₈Cl₂(NO₃)} ( 2 ), characterized by single‐crystal X‐ray crystallography, infrared spectroscopy, and magnetic measurements. {Gd₃₈(ClO₄)₆}, encapsulating six ClO₄^? ions, features a cage core composed of twelve vertex‐sharing {Gd₄} tetrahedrons and one Gd???Gd pillar. When Cl^? and NO₃^? were incorporated in the reaction instead of ClO₄^?, {Gd₄₈Cl₂(NO₃)} is obtained with a barrel shape constituted by twelve vertex‐sharing {Gd₄} tetrahedrons and six {Gd₅} pyramids. What is more, the cage‐like {Gd₃₈} can be dynamically converted into the barrel‐shaped {Gd₄₈} upon Cl^? and NO₃^? stimulus. To our knowledge, it is the first time that the linear M‐O‐M′ fashion and the unique μ₈‐ClO₄^? mode have been crystallized in pure lanthanide complex, and complex 2 represents the largest gadolinium cluster. Both of the complexes display large magnetocaloric effect in units of J kg^?1 K^?1 and mJ cm^?3 K^?1 on account of the weak antiferromagnetic exchange, the high N_Gd/M_W ratio (magnetic density), and the relatively compact crystal lattice (mass density).     

Determination Limit of Fluorescence Turn‐On Probes for the Acetate Anion

Three fluorescent turn‐on probes containing 3,6‐dichloro‐9H‐carbazole as carbazyl part have been designed and synthesized. Among studied anions F^?, AcO^?, H₂PO , Cl^?, Br^? and I^?, AcO^? showed the strongest binding ability with all probes. The strong basic anions, such as AcO^?, H₂PO , and F^?, induced a significant red‐shift in absorption and a concomitant increase in fluorescent emission of the probes caused by photoinduced electron transfer (PET). The determination limit of probe 3 (Scheme 1) toward AcO^? is 3.0×10^?7 M . ¹H‐NMR Titration experiments shed light on the nature of the interaction between the probes and the anions. Theoretical investigation further illustrated the possible binding mode in these host? guest interactions and the roles of molecular frontier orbitals in molecular interplay.     

Chemical Speciation of Antimony(III and V) in Water by Adsorptive Cathodic Stripping Voltammetry Using the 4‐(2‐Thiazolylazo) – Resorcinol

A simple adsorptive cathodic stripping voltammetry method has been developed for antimony (III and V) speciation using 4‐(2‐thiazolylazo) – resorcinol (TAR). The methodology involves controlled preconcentration at pH 5, during which antimony(III) – TAR complex is adsorbed onto a hanging mercury drop electrode followed by measuring the cathodic peak current (I_p,c) at ?0.39 V versus Ag/AgCl electrode. The plot of I_p,c versus antimony(III) concentration was linear in the range 1.35×10^?9–9.53×10^?8 mol L^?1.The LOD and LOQ for Sb(III) were found 4.06×10^?10 and 1.35×10^?9 mol L^?1, respectively. Antimony(V) species after reduction to antimony(III) with Na₂SO₃ were also determined. Analysis of antimony in environment water samples was applied satisfactorily.     

对氨基苯甲酸热力学性质的量热和热分析研究

在80～400 K温区,用高精度全自动绝热量热仪测定了对氨基苯甲酸摩尔热容,得到摩尔热容随温度的变化的关系式为：