Applications of iron and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 as a nanomagnetic catalyst for the chemoselective oxidation of sulfides to sulfoxides under solvent‐free conditions

In the present study, Fe²⁺ and Ni²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ (γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺) with a high surface area has been synthesized and characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and scanning electron microscope (SEM) techniques. Then, γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺ were used as a new and magnetically recoverable nano catalyst for the selective oxidation of sulfides to sulfoxides with 33% aqueous H₂O₂ (0.5 mL) as an oxidant at room temperature in good to excellent yields and short reaction time. Nontoxicity of reagent, mild reaction condition, inexpensive and high catalytic activity, simple experimental procedure, short period of conversion and excellent yields, and ease of recovery from the reaction mixture using an external magnet are the advantages of the present method.     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

Core–Shell α‐Fe2O3@α‐MoO3 Nanorods as Lithium‐Ion Battery Anodes with Extremely High Capacity and Cyclability

α‐Fe₂O₃ nanoparticles are uniformly coated on the surface of α‐MoO₃ nanorods through a two‐step hydrothermal synthesis method. As the anode of a lithium‐ion battery, α‐Fe₂O₃@α‐MoO₃ core–shell nanorods exhibit extremely high lithium‐storage performance. At a rate of 0.1 C (10 h per half cycle), the reversible capacity of α‐Fe₂O₃@α‐MoO₃ core–shell nanorods is 1481 mA h g^?1 and a value of 1281 mA h g^?1 is retained after 50 cycles, which is much higher than that retained by bare α‐MoO₃ and α‐Fe₂O₃ and higher than traditional theoretical results. Such a good performance can be attributed to the synergistic effect between α‐Fe₂O₃ and α‐MoO₃, the small size effect, one‐dimensional nanostructures, short paths for lithium diffusion, and interface spaces. Our results reveal that core–shell nanocomposites have potential applications as high‐performance lithium‐ion batteries.     

Novel electromagnetic functionalized γ‐Fe2O3/polypyrrole composite nanostructures with high conductivity

In general, the conductivity of polypyrrole (PPy) is reduced by addition of magnetic nanoparticles as the additives owing to insulating effect of magnetic nanoparticles. In this article, novel electromagnetic functionalized PPy composite nanostructures were prepared by a template‐free method associated with γ‐Fe₂O₃ nano‐needles as the hard templates in the presence of p‐toluene‐sulfonic acid (p‐TSA) and FeCl₃·6H₂O as the dopant and oxidant, respectively. It was found that the molar ratio of γ‐Fe₂O₃ to pyrrole monomer represented by [γ‐Fe₂O₃]/[Py] ratio strongly affected the morphology and the conductivity of the γ‐Fe₂O₃/PPy composite nanostructures. A growth mechanism for the composite nanostructures was proposed based on the variance of the morphology with the [γ‐Fe₂O₃]/[Py] ratio. Compared with previously reported γ‐Fe₂O₃/PPy composites, the as‐prepared novel composite nanostructures showed much higher conductivity (up to ～50 times higher). Moreover, the synthesized γ‐Fe₂O₃/PPy composite nanostructures displayed ferromagnetic behavior with a high coercive force. Explanations for these interesting observations were made in terms of the magnetic interaction between ferromagnetic γ‐Fe₂O₃ nano‐needles and spin‐polaron of PPy nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4446–4453, 2009     

Magnetic poly(glycidyl methacrylate) particles prepared in the presence of surface‐modified γ‐Fe2O3

Maghemite (γ‐Fe₂O₃) colloid has been synthesized by coprecipitation of ferrous and ferric salts in alkaline medium and oxidation. The obtained nanoparticles were complexed with a phosphate macromonomer—penta(propylene glycol) methacrylate phosphate (PPGMAP). Complexes with the weight ratio PPGMAP/γ‐Fe₂O₃ 0.01–10 were investigated using a range of characterization methods. The amount of PPGMAP attached to the particles was about 22 wt %. The size and size distribution of the γ‐Fe₂O₃ core particles in the dry state was measured by TEM. To complete the TEM images, the hydrodynamic size of the nanoparticles including polymer shell and the maghemite core was determined by DLS measurements in toluene. Magnetic poly(glycidyl methacrylate) (PGMA) nanospheres were obtained by Kraton G 1650‐stabilized and 2,2′‐azobisisobutyronitrile‐initiated polymerization of glycidyl methacrylate (GMA) in toluene or toluene/cyclohexane mixture in the presence of PPGMAP‐coated γ‐Fe₂O₃ colloid. The effect of Kraton G 1650 concentration on the morphology, PGMA nanosphere size and polydispersity was investigated. The particles were characterized also by both thermogravimetric analysis and magnetic measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4982–4994, 2009     

Charge Separation and Catalytic Activity of Fe3O4@Ag “Nanospheres”

Nanospheres of Ag‐coated Fe₃O₄ were successfully synthesized and characterized. Photocatalytic properties of Fe₃O₄@Ag composites have been investigated using steady‐state studies and laser pulse excitations. Accumulation of the electrons in the Ag shell was detected from the shift in the surface plasmon band from 430 to 405 nm, which was discharged when an electron acceptor such as O₂, Thionine (TH) or C₆₀ was introduced into the system. Charge equilibration with redox couple such as C₆₀^●–/C₆₀ indicated the ability of these core–shell structures to carry out photocatalytic reduction reactions. As well, outer Ag layer could boost charge separation in magnetic core through dual effects of Schottky junction and localized surface plasmonic resonance (LSPR)‐powered band gap breaking effect under sunlight irradiation; resulted in higher photocatalytic degradation of diphenylamine (DPA). The maximum photocatalytic degradation rate was achieved at optimum amount of Ag‐NP loading to products. Adsorption studies confirmed that degradation of DPA dominantly occurred in solution. Moderately renewability of the nanocatalysts under sunlight was due to oxidation and dissolution of the outer Ag layer.     

Facile Hydrogen‐Bond‐Assisted Polymerization and Immobilization Method to Synthesize Hierarchical Fe3O4@Poly(4‐vinylpyridine‐co‐divinylbenzene)@Au Nanostructures and Their Catalytic Applications

Hierarchical Fe₃O₄@poly(4‐vinylpyridine‐co‐divinylbenzene)@Au (Fe₃O₄@P(4‐VP–DVB)@Au) nanostructures were fabricated successfully by means of a facile two‐step synthesis process. In this study, well‐defined core–shell Fe₃O₄@P(4‐VP–DVB) microspheres were first prepared with a simple polymerization method, in which 4‐VP was easily polymerized on the surface of Fe₃O₄ nanoparticles by means of strong hydrogen‐bond interactions between ? COOH groups on poly(acrylic acid)‐modified Fe₃O₄ nanoparticles and a 4‐VP monomer. HAuCl₄ was adsorbed on the chains of a P(4‐VP) shell and then reduced to Au nanoparticles by NaBH₄, which were embedded into the P(4‐VP) shell of the composite microspheres to finally form the Fe₃O₄@P(4‐VP–DVB)@Au nanostructures. The obtained Fe₃O₄@P(4‐VP–DVB)@Au catalysts with different Au loadings were applied in the reduction of 4‐nitrophenol (4‐NP) and exhibited excellent catalytic activity (up to 3025 h^?1 of turnover frequency), facile magnetic separation (up to 31.9 emu g^?1 of specific saturation magnetization), and good durability (over 98 % of conversion of 4‐NP after ten runs of recyclable catalysis and almost negligible leaching of Au).     

Hydrothermal Synthesis and Properties of Controlled α‐Fe2O3 Nanostructures in HEPES Solution

A facile, template‐free, and environmentally friendly hydrothermal strategy was explored for the controllable synthesis of α‐Fe₂O₃ nanostructures in HEPES solution (HEPES=2‐[4‐(2‐hydroxyethyl)‐1‐piperazinyl]ethanesulfonic acid). The effects of experimental parameters including HEPES/FeCl₃ molar ratio, pH value, reaction temperature, and reaction time on the formation of α‐Fe₂O₃ nanostructures have been investigated systematically. Based on the observations of the products, the function of HEPES in the reaction is discussed. The different α‐Fe₂O₃ nanostructures possess different optical, magnetic properties, and photocatalytic activities, depending on the shape and size of the sample. In addition, a novel and facile approach was developed for the synthesis of Au/α‐Fe₂O₃ and Ag/α‐Fe₂O₃ nanocomposites in HEPES buffer solution; this verified the dual function of HEPES both as reductant and stabilizer. This work provides a new strategy for the controllable synthesis of transition metal oxide nanostructures and metal‐supported nanocomposites, and gives a strong evidence of the relationship between the property and morphology/size of nanomaterials.     

3D Porous Carbon Framework Stabilized Ultra‐Uniform Nano γ‐Fe2O3: A Useful Catalyst System

We present a novel strategy for the scalable fabrication of γ‐Fe₂O₃@3DPCF, a three‐dimensional porous carbon framework (PCF) anchored ultra‐uniform and ultra‐stable γ‐Fe₂O₃ nanocatalyst. The γ‐Fe₂O₃@3DPCF nanocomposites were facilely prepared with the following route: condensation of iron(III) acetylacetonate with acetylacetonate at room temperature to form the polymer precursor (PPr), which was carbonized subsequently at 800 °C. The homogeneous aldol condensation offered an ultra‐uniform distribution of iron, so that the γ‐Fe₂O₃ nanoparticles (NPs) were uniformly distributed in the 3D carbon architecture with the average size of approximate 20 nm. The Fe₂O₃ NPs were capped with carbon, so that the iron oxide maintained its γ‐phase instead of the more stable α‐phase. The nanocomposite was an excellent catalyst for the reduction of nitroarene; it gave >99 % conversion and 100 % selectivity for the reduction of nitroarenes to the corresponding anilines at 100 °C. The fabrication of the γ‐Fe₂O₃@3DPCF nanocatalyst represents a green and scalable method for the synthesis of novel carbon‐based metal oxide nanostructures.     

Self-assembled 3D flowerlike hierarchical Fe3O4@Bi2O3 core-shell architectures and their enhanced photocatalytic activity under visible light

Three‐dimensional (3D) flowerlike hierarchical Fe₃O₄@Bi₂O₃ core–shell architectures were synthesized by a simple and direct solvothermal route without any linker shell. The results indicated that the size of the 3D flowerlike hierarchical microspheres was about 420 nm and the shell was composed of several nanosheets with a thickness of 4–10 nm and a width of 100–140 nm. The saturation magnetization of the superparamagnetic composite microspheres was about 41 emu g^?1 at room temperature. Moreover, the Fe₃O₄@Bi₂O₃ composite microspheres showed much higher (7–10 times) photocatalytic activity than commercial Bi₂O₃ particles under visible‐light irradiation. The possible formation mechanism was proposed for Ostwald ripening and the self‐assembled process. This novel composite material may have potential applications in water treatment, degradation of dye pollutants, and environmental cleaning, for example.     

Understanding the Effect Models of Ionic Liquids in the Synthesis of NH4‐Dw and γ‐AlOOH Nanostructures and Their Conversion into Porous γ‐Al2O3

Well‐dispersed ammonium aluminum carbonate hydroxide (NH₄‐Dw) and γ‐AlOOH nanostructures with controlled morphologies have been synthesized by employing an ionic‐liquid‐assisted hydrothermal process. The basic strategies that were used in this work were: 1) A controllable phase transition from NH₄‐Dw to γ‐AlOOH could be realized by increasing the reaction temperature and 2) the morphological evolution of NH₄‐Dw and γ‐AlOOH nanostructures could be influenced by the concentration of the ionic liquid. Based on these experimental results, the main objective of this work was to clarify the effect models of the ionic liquids on the synthesis of NH₄‐Dw and γ‐AlOOH nanostructures, which could be divided into cationic‐ or anionic‐dominant effect models, as determined by the different surface structures of the targets. Specifically, under the cationic‐dominant regime, the ionic liquids mainly showed dispersion effects for the NH₄‐Dw nanostructures, whereas the anionic‐dominant model could induce the self‐assembly of the γ‐AlOOH particles to form hierarchical structures. Under the guidance of the proposed models, the effect of the ionic liquids would be optimized by an appropriate choice of cations or anions, as well as by considering the different effect models with the substrate surface. We expect that such effect models between ionic liquids and the target products will be helpful for understanding and designing rational ionic liquids that contain specific functional groups, thus open up new opportunities for the synthesis of inorganic nanomaterials with new morphologies and improved properties. In addition, these as‐prepared NH₄‐Dw and γ‐AlOOH nanostructures were converted into porous γ‐Al₂O₃ nanostructures by thermal decomposition, whilst preserving the same morphology. By using HRTEM and nitrogen‐adsorption analysis, the obtained γ‐Al₂O₃ samples were found to have excellent porous properties and, hence, may have applications in catalysis and adsorption.     

Magnetic Resonance and Mössbauer Studies of Superparamagnetic γ‐Fe2O3 Nanoparticles Encapsulated into Liquid‐Crystalline Poly(propylene imine) Dendrimers

We present the first results of electron magnetic resonance (EMR) and Mössbauer spectroscopy studies of γ‐Fe₂O₃ nanoparticles (NPs) incorporated into liquid‐crystalline, second‐generation dendrimers. The mean size of NPs formed in the dendrimers was around 2.5 nm. A temperature‐driven transition from superparamagnetic to ferrimagnetic resonance was observed for the sample. Low‐temperature blocking of the NP magnetic moments has been clearly evidenced in the integrated EMR line intensity and the blocking temperature was about 60 K. The physical parameters of magnetic NPs (magnetic moment, effective magnetic anisotropy) have been determined from analyses of the EMR data. The effective magnetic anisotropy constant is enhanced relative to bulk γ‐Fe₂O₃ and this enhanced value is associated with the influence of the surface and shape effects. The angular dependence of the EMR signal position for the field‐freezing sample from liquid‐crystalline phase showed that NPs possessed uniaxial anisotropy, in contrast to bulk γ‐Fe₂O₃. Mössbauer spectroscopy determined that fabricated NPs consisted of an α‐Fe core and a γ‐Fe₂O₃ shell.     

Mesoporous Core–Shell Fenton Nanocatalyst: A Mild,Operationally Simple Approach to the Synthesis of Adipic Acid

Mesoporous nanoparticles composed of γ‐Al₂O₃ cores and α‐Fe₂O₃ shells were synthesized in aqueous medium. The surface charge of γ‐Al₂O₃ helps to form the core–shell nanocrystals. The core–shell structure and formation mechanism have been investigated by wide‐angle XRD, energy‐dispersive X‐ray spectroscopy, and elemental mapping by ultrahigh‐resolution (UHR) TEM and X‐ray photoelectron spectroscopy. The N₂ adsorption–desorption isotherm of this core–shell materials, which is of type IV, is characteristic of a mesoporous material having a BET surface area of 385 m² g^?1 and an average pore size of about 3.2 nm. The SEM images revealed that the mesoporosity in this core–shell material is due to self‐aggregation of tiny spherical nanocrystals with sizes of about 15–20 nm. Diffuse‐reflectance UV/Vis spectra, elemental mapping by UHRTEM, and wide‐angle XRD patterns indicate that the materials are composed of aluminum oxide cores and iron oxide shells. These Al₂O₃@Fe₂O₃ core–shell nanoparticles act as a heterogeneous Fenton nanocatalyst in the presence of hydrogen peroxide, and show high catalytic efficiency for the one‐pot conversion of cyclohexanone to adipic acid in water. The heterogeneous nature of the catalyst was confirmed by a hot filtration test and analysis of the reaction mixture by atomic absorption spectroscopy. The kinetics of the reaction was monitored by gas chromatography and ¹H NMR spectroscopy. The new core–shell catalyst remained in a separate solid phase, which could easily be removed from the reaction mixture by simple filtration and the catalyst reused efficiently.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

Methods for the surface functionalization of γ‐Fe2O3 nanoparticles with initiators for atom transfer radical polymerization and the formation of core–shell inorganic–polymer structures

Carboxylic acid capped γ‐Fe₂O₃ nanoparticles were prepared by the standard decomposition of Fe(CO)₅ in di‐n‐octyl ether and oleic acid. Two methods were employed to introduce surface functionality to the nanoparticles. First, a thermally stable, tert‐butyldiphenylsilyl‐protected hydroxyl group was incorporated into the carboxylic acid surfactant used during the synthesis. Subsequent deprotection and transformation installed a 2‐bromopropionyl ester group on the particle surface (the functional‐group‐interchange method). The resulting nanoparticles were 4.53 nm in average diameter and were characterized with IR spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction, and elemental analysis. Second, a 2‐bromopropionyl ester group was installed on the particle surface after synthesis via the exchange of the surface oleic acid with a carboxylic acid containing the desired 2‐bromopropionyl ester unit (the ligand‐exchange method). The resulting nanoparticles were 4.30 nm in average diameter and were characterized with IR spectroscopy, TEM, and elemental analysis. Monitoring the percentage of bromine incorporated into the nanoparticle sample versus the ligand‐exchange reaction time indicated that the number of initiator‐containing carboxylic acids that could be exchanged onto the surface was limited, presumably by the steric size of the 2‐bromopropionyl ester group. Styrene was then polymerized directly off γ‐Fe₂O₃ nanoparticles, and this yielded hybrid core–shell structures. The measurements of the magnetic properties of the samples demonstrated that the magnetism of the core γ‐Fe₂O₃ nanoparticle did not change during the performance of the chemical transformations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3675–3688, 2005     

Hierarchical Fe3O4@TiO2 Yolk–Shell Microspheres with Enhanced Microwave‐Absorption Properties

A facile and efficient strategy for the synthesis of hierarchical yolk–shell microspheres with magnetic Fe₃O₄ cores and dielectric TiO₂ shells has been developed. Various Fe₃O₄@TiO₂ yolk–shell microspheres with different core sizes, interstitial void volumes, and shell thicknesses have been successfully synthesized by controlling the synthetic parameters. Moreover, the microwave absorption properties of these yolk–shell microspheres, such as the complex permittivity and permeability, were investigated. The electromagnetic data demonstrate that the as‐synthesized Fe₃O₄@TiO₂ yolk–shell microspheres exhibit significantly enhanced microwave absorption properties compared with pure Fe₃O₄ and our previously reported Fe₃O₄@TiO₂ core–shell microspheres, which may result from the unique yolk–shell structure with a large surface area and high porosity, as well as synergistic effects between the functional Fe₃O₄ cores and TiO₂ shells.     

Perylene diimide‐modified magnetic γ‐Fe2O3/CeO2 nanoparticles as peroxidase mimics for highly sensitive colorimetric detection of Vitamin C

Perylene diimide‐modified magnetic γ‐Fe₂O₃/CeO₂ nanoparticles (γ‐Fe₂O₃/CeO₂‐PDI) were prepared and exhibited excellent peroxidase‐like activity. The samples were characterized by HR‐TEM, XRD, Raman, N₂ adsorption, magnetic strength and XPS. The obtained γ‐Fe₂O₃/CeO₂‐PDI had size of 10~20 nm with high specific surface area of 77 m²/g, and could be easily separated from the aqueous solution by using a magnet, which are in favor of its practical application. Due to the decoration of PDI, the γ‐Fe₂O₃/CeO₂‐PDI possessed more surface defects (Ce³⁺) and active oxygen species than that of γ‐Fe₂O₃/CeO₂, resulting in the outstanding catalytic performance. And the composite catalyst also showed highly sensitive and selectivity toward VC with a limit of detection of 0.45 μM. Based on the fluorescent results, a possible hydroxyl radical (?OH) catalytic mechanism was proposed. It is believed that the as‐prepared γ‐Fe₂O₃/CeO₂‐PDI nanoparticles are promising biosensors applied for biomedical and food analysis.     

Self‐assembled three‐dimensional flower‐like α‐Fe2O3 nanostructures and their application in catalysis

Three‐dimensional flower‐like α‐Fe₂O₃ nanostructures have been successfully synthesized by a simple surfactant‐free environmental friendly solvolthermal process. The as‐prepared products were investigated by X‐ray powder diffraction, transmission electron microscopy, and field emission scanning electron microscopy. By adjusting the synthetic parameters, the shape of the α‐Fe₂O₃ nanostructures can be controlled. The three‐dimensional flower‐like α‐Fe₂O₃ nanostructures were found to be highly active as catalysts for phenol alkylation. The effects of various parameters, such as reaction temperature, reaction time and the amount of catalyst, were studied. The catalyst was stable and could be reused three times in normal atmosphere without suffering appreciable loss in catalytic activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Monomer Protonation‐Dependent Surface Polymerization to Achieve One‐Step Grafting Cross‐Linked Poly(4‐Vinylpyridine) Onto Core–Shell Fe3O4@SiO2 Nanoparticles

Functional polymer‐grafting silica nanoparticles hold great promise in diverse applications such as molecule recognition, drug delivery, and heterogeneous catalysis due to high density and uniform distribution of functional groups and their tunable spatial distance. However, conventional grafting methods from monomers mainly consist of one or more extra surface modification steps and a subsequent surface polymerization step. A monomer protonation‐dependent surface polymerization strategy is proposed to achieve one‐step uniform surface grafting of cross‐linked poly(4‐vinylpyridine) (P4VP) onto core–shell Fe₃O₄@SiO₂ nanostructures. At an approximate pH, partially protonated 4VP sites in aqueous solution can be strongly adsorbed onto deprotonated silanol groups ( Si O⁻) onto Fe₃O₄@SiO₂ nanospheres to ensure prior polymerization of these protonated 4VP sites exclusively onto Fe₃O₄@SiO₂ nanoparticles and subsequent polymerization of other 4VP and divinylbenzene monomers harvested by these protonated 4VP monomers onto Fe₃O₄@SiO₂ nanoparticles, thereby achieving direct grafting of cross‐linked P4VP macromolecules onto Fe₃O₄@SiO₂ nanoparticles.