Synthesis and Photophysics of Core‐Substituted Naphthalene Diimides: Fluorophores for Single Molecule Applications

The synthesis and photophysics of two new aminopropenyl naphthalene diimide (SANDI) dyes are reported. A general and convenient method for the synthesis of the precursor mono‐, di‐, and tetrabrominated 1,4,5,8‐naphthalene tetracarboxylic dianhydrides is described. The two core‐substituted SANDIs exhibit many of the photophysical properties required for fluorescence labeling applications including high photostability and high fluorescence quantum yields (>0.5) in the visible region of the spectrum. The emission wavelength is sensitive to the number of substituents on the NDI core, and the fluorescence decay times are in the range of ～8–12 ns for both compounds in the solvents investigated. Preliminary fluorescence emission data from single molecules of the compounds embedded in poly(methyl methacrylate) films are also reported and show that single molecules have very low yields of photobleaching, particularly the di‐substituted system. Furthermore, only a small proportion (<10 %) of the single molecules studied display fluorescence intermittencies or “blinks” in their photon trajectory. The compounds appear to be excellent candidates for applications at the single molecule level, for example, as FRET labels.     

One‐Pot Domino Carbonylation Protocol for Aromatic Diimides toward n‐Type Organic Semiconductors

Aromatic diimides are one of the most important chromophores in the construction of n‐type organic semiconductors, which lag far behind their p‐type counterpart but are necessary for ambipolar transistors, p‐n junctions and organic complementary circuits. Herein, we establish a facile one‐pot domino synthetic protocol for aromatic diimides via palladium‐catalyzed carbonylation of tetrabromo aromatic precursors. Taking tetrabromocorannulene (TBrCor) and tetrabromo‐2,7‐di‐tert‐butylpyrene (TBrPy) as the typical examples, we obtained diimide derivatives in yields of about 50 %, one order of magnitude higher than that of the traditional multi‐step diimidization. As demonstrated in the case of corannulene diimide, the efficient diimidization not only allows the LUMO levels to be lowered significantly but also provides an ordered and closer packing structures, opening up possibilities to the development of n‐type semiconducting materials based on a variety of aromatic systems.     

Solution‐Processable n‐Type Semiconductors Based on Unsymmetrical Naphthalene Imides: Synthesis,Characterization, and Applications in Field‐Effect Transistors

A series of unsymmetrical naphthalene imide derivatives ( 1a , 1b , 2 , 3 , 4 , 5 ) with high electron affinity was synthesized and used in n‐channel organic field‐effect transistors (OFETs). They have very good solubility in common organic solvents and good thermal stability up to 320 °C. Their photophysical, electrochemical, and thermal properties were investigated in detail. They showed low‐lying LUMO energy levels from ?3.90 to ?4.15 eV owing to a strong electron‐withdrawing character. Solution‐processed thin‐film OFETs based on 1a , 1b , 2 , 3 , 4 were measured in both N₂ and air. They all showed n‐type FET behavior. The liquid‐crystalline compounds 1a , 1b , and 3 showed good performance owing to the self‐healing properties of the film in the liquid‐crystal phase. Compound 3 has an electron mobility of up to 0.016 cm² V^?1 s^?1 and current on/off ratios of 10⁴–10⁵.     

New Core-Expanded Naphthalene Diimides for n-Channel Organic Thin Film Transistors

Four classes of core-expanded naphthalene diimides （la, lb, 2a, 2b, 3 and 4） that bear different elec- tron-deficient sulfur heterocycles were designed and synthesized. The solution-processed thin films of la, 2a, 3 and 4 operated well in air as n-channel organic transistors with electron mobility ranging from MO 6 to 0.14 cm2/Vs, depending on the different conjugated backbones. The thin film microstructure studies were also carried out to un- derstand the variations of the electron mobility for thin films of la, 2a, 3 and 4.     

Synthesis and Applications of π‐Extended Naphthalene Diimides

Naphthalene diimides have received much attention due to their high electron affinities, high electron mobility, and good thermal and oxidative stability, therefore making them promising candidates for a variety of organic electronic applications. However, π‐extended naphthalene diimides with lower HOMO‐LUMO gaps and higher stability have only been developed recently because of the synthetic difficulties. This account describes recent developments in the structures, synthesis, properties, and applications of π‐extended naphthalene diimides, including pure‐carbon and heterocyclic acene diimides, from our research group.     

Strategies for the Synthesis of Functional Naphthalene Diimides

Naphthalene diimides, which have for a long time been in the shadow of their higher homologues the perylene diimides, currently belong to the most investigated classes of organic compounds. This is primarily due to the initial synthetic studies on core functionalization that were carried out at the beginning of the last decade, which facilitated diverse structural modifications of the naphthalene scaffold. Compounds with greatly modified optical and electronic properties that can be easily and effectively modulated by appropriate functionalization were made accessible through relatively little synthetic effort. This resulted in diverse interesting applications. The electron‐deficient character of these compounds makes them highly valuable, particularly in the field of organic electronics as air‐stable n‐type semiconductors, while absorption bands over the whole visible spectral range through the introduction of core substituents enabled interesting photosystems and photovoltaic applications. This Review provides an overview on different approaches towards core functionalization as well as on synthetic strategies for the core expansion of naphthalene diimides that have been developed mainly in the last five years.     

n‐Type Conjugated Polymer Based on Dicyanodistyrylbenzene and Naphthalene Diimide Units for All‐Polymer Solar Cells

All polymer solar cells (all‐PSCs), possessing superior mechanical strength and flexibility, offer the commercialization opportunity of the PSCs for flexible and portable devices. In this work, we designed and synthesized two copolymer acceptors based on dicyanodistyrylbenzene (DCB) and naphthalene diimide (NDI) units. The corresponding copolymer acceptors are denoted as PDCB‐NDI812 and PDCB‐NDI1014. The medium band gap copolymer PBDB‐T was selected as donor material for investigation of the photovoltaic performance. Two all‐PSCs devices showed power conversion efficiencies (PCE) of 4.26% and 3.43% for PDCB‐NDI812 and PDCB‐NDI1014, respectively. The improved PCE was ascribed to the higher short‐circuit current (J_SC), greater charge carrier mobility and higher exciton dissociation probability of the PBDB‐T:PDCB‐NDI812 blend film. These results suggest that DCB unit and NDI unit based copolymer acceptors are promising candidates for high performance all‐PSCs.     

Donor-Acceptor Dyads and Triads Employing Core-Substituted Naphthalene Diimides: A Synthetic and Spectro (Electrochemical) Study

Donor-acceptor dyads and triads comprising core-substituted naphthalene diimide (NDI) chromophores and either phenothiazine or phenoxazine donors are described. Synthesis combined with electrochemical and spectroelectrochemical investigations facilitates characterisation of the various redox states of these molecules, confirming the ability to combine arrays of electron donating and accepting moieties into single species that retain the redox properties of these individual moieties.     

新型萘四酰亚胺类长波长荧光染料的构建及其光谱调控

本文通过杂环胺类对二溴萘四酰亚胺的亲核反应,分别设计合成了8个未见报道的基于萘四酰亚胺母体的新型单取代或者双取代荧光染料.系统性光谱研究表明,胺类的推电子作用差异可以很好地调控其吸收和荧光波长,使之成为一类性能良好的可见或长波长荧光染料(最大吸收509—580 nm;最大发射565—638 nm;荧光量子效率0.21—0.54;Stokes位移36—77 nm).     

Ladder‐Type Heteroarene‐Based Organic Semiconductors

The fusion of heteroaromatic rings into ladder‐type heteroarenes can stabilize frontier molecular orbitals and lead to improved physicochemical properties that are beneficial for applications in various optoelectronic devices. Thus, ladder‐type heteroarenes, which feature highly planar backbones and well‐delocalized π conjugation, have recently emerged as a promising type of organic semiconductor with excellent device performance in organic photovoltaics (OPVs) and organic field‐effect transistors (OFETs). In this Focus Review, we summarize the recent advances in ladder‐type heteroarene‐based organic semiconductors, such as hole‐ and electron‐transporting molecular semiconductors, and fully ladder‐type conjugated polymers towards their applications in OPVs and OFETs. The recent use of ladder‐type small‐molecule acceptor materials has strikingly boosted the power conversion efficiency of fullerene‐free solar cells, and selected examples of the latest developments in ladder‐type fused‐ring electron acceptor materials are also elaborated.     

Tetrachlorinated Tetraazaperopyrenes (TAPPs): Highly Fluorescent Dyes and Semiconductors for Air‐Stable Organic n‐Channel Transistors and Complementary Circuits

A range of 2,9‐perfluoroalkyl‐substituted tetraazaperopyrene (TAPP) derivatives ( 1 – 5 ) was synthesised by reacting 4,9‐diamino‐3,10‐perylenequinone diimine (DPDI) with the corresponding carboxylic acid chloride or anhydride in the presence of a base. The reaction of compounds 1 – 4 with dichloroisocyanuric acid (DIC) in concentrated sulphuric acid resulted in the fourfold substitution of the tetraazaperopyrene core, yielding the 2,9‐bisperfluoroalkyl‐4,7,11,14‐tetrachloro‐1,3,8,10‐tetraazaperopyrenes 6 – 9 , respectively. The optical and electrochemical data demonstrate the drastic influence of the core substitution on the properties. All compounds are highly luminescent (fluorescence quantum yields of up to Φ=0.8). The LUMO energies of the tetrachlorinated TAPP derivatives (determined by cyclic voltammetry and computed by DFT calulations) were found to be below ?4 eV. In the course of this work the performance of TAPP derivatives in organic thin‐film transistors (TFTs) was investigated, and their n‐channel characteristics with field‐effect mobilities of up to 0.14 cm² V^?1 s^?1 and an on/off current ratio of >10⁶ were confirmed. Long‐term stabilities of 3–4 months under ambient conditions of the devices were established. Complementary inverters and ring oscillators with n‐channel TFTs based on compound 8 and p‐channel TFTs based on dinaphtho‐[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (DNTT) were fabricated on a glass substrate.     

Stimuli‐Responsive Naphthalene Diimide as Invisible Ink: A Rewritable Fluorescent Platform for Anti‐Counterfeiting

Herein, we report an approach to combat counterfeiting and storage of valuable information based on the solid‐state fluorescence switching behavior of isoniazid functionalized naphthalene diimide (ISO_NDI) in response to an external stimuli (i. e., HCl vapor). The unique feature of ISO_NDI is further utilized to develop an invisible ink (ISO_NDI‐PVA) with commercial polymer polyvinyl alcohol (PVA). A solid‐state fluorescence recovery was observed while loading with HCl vapors. This exclusive property of the material could be applied directly as a security ink for confidential data storage purpose. Based on above strategy, we successfully realized the rewritable application by using ISO_NDI‐PVA ink and confirm its practical efficacy on various substrates by creating different patterns. The solid‐state fluorescence switching behavior of ISO_NDI‐PVA ink exhibited reversible on/off signal for multiple cycles under the influence of HCl/NH₃ vapors. Mechanistic investigation supports a clear participation of intermolecular charge transfer (ICT) phenomenon in the solid‐state fluorescence switching property. The ease of fabricating the ink with invisible to visible characteristics in response to HCl vapors provides new opportunities for exploring the application of ISO_NDI‐PVA as invisible ink for targeted security applications.     

Dithienoindophenines: p‐Type Semiconductors Designed by Quinoid Stabilization for Solar‐Cell Applications

Compared with the dominant aromatic conjugated materials, photovoltaic applications of their quinoidal counterparts featuring rigid and planar molecular structures have long been unexplored despite their narrow optical bandgaps, large absorption coefficients, and excellent charge‐transport properties. The design and synthesis of dithienoindophenine derivatives (DTIPs) by stabilizing the quinoidal resonance of the parent indophenine framework is reported here. Compared with the ambipolar indophenine derivatives, DTIPs with the fixed molecular configuration are found to be p‐type semiconductors exhibiting excellent unipolar hole mobilities up to 0.22 cm² V^?1 s^?1, which is one order of magnitude higher than that of the parent IP‐O and is even comparable to that of QQT(CN)4‐based single‐crystal field‐effect transistors (FET). DTIPs exhibit better photovoltaic performance than their aromatic bithieno[3,4‐b]thiophene (BTT) counterparts with an optimal power‐conversion efficiency (PCE) of 4.07 %.     

Chiral Perylene Diimides: Building Blocks for Ionic Self‐Assembly

A chiral perylene diimide building block has been prepared based on an amine derivative of the amino acid L ‐phenylalanine. Detailed studies were carried out into the self‐assembly behaviour of the material in solution and the solid state using UV/Vis, circular dichroism (CD) and fluorescence spectroscopy. For the charged building block BTPPP, the molecular chirality of the side chains is translated into the chiral supramolecular structure in the form of right‐handed helical aggregates in aqueous solution. Temperature‐dependent UV/Vis studies of BTPPP in aqueous solution showed that the self‐assembly behaviour of this dye can be well described by an isodesmic model in which aggregation occurs to generate short stacks in a reversible manner. Wide‐angle X‐ray diffraction studies (WXRD) revealed that this material self‐organises into aggregates with π–π stacking distances typical for π‐conjugated materials. TEM investigations revealed the formation of self‐assembled structures of low order and with no expression of chirality evident. Differential scanning calorimetry (DSC) and polarised optical microscopy (POM) were used to investigate the mesophase properties. Optical textures representative of columnar liquid–crystalline phases were observed for solvent‐annealed samples of BTPPP. The high solubility, tunable self‐assembly and chiral ordering of these materials demonstrate their potential as new molecular building blocks for use in the construction of chiro‐optical structures and devices.     

Electronic Interactions of n‐Doped Perylene Diimide Groups Appended to Polynorbornene Chains: Implications for Electron Transport in Organic Electronics

A polymer consisting of a polynorbornene backbone with perylene diimide (PDI) pendant groups on each monomeric unit is synthesized via ring opening metathesis polymerization. The PDI pendant groups along the polymer backbone, studied by UV–vis absorption, fluorescence emission, and electron paramagnetic resonance spectroscopy in addition to electrochemical methods, show evidence of molecular aggregation and corresponding electronic coupling with neighboring groups, which forms pathways for efficient electron transport from one group to another in a specific reduced form. When n‐doped, the title polymer shows redox conductivity of 5.4 × 10⁻³ S cm⁻¹, comparable with crystalline PDI materials, and is therefore a promising material for use in organic electronics.     

Thiophene‐S,S‐dioxidized Indophenine: A Quinoid‐Type Building Block with High Electron Affinity for Constructing n‐Type Polymer Semiconductors with Narrow Band Gaps

Three thiophene‐S,S‐dioxidized indophenine (IDTO) isomers, 3 a (E,E,E), 3 b (Z,E,E), and 3 c (Z,E,Z), were synthesized by oxidation of an indophenine compound. 3 b and 3 c could be converted into the most‐stable 3 a by heating at 110 °C. An IDTO‐containing conjugated polymer, PIDTOTT, was prepared using 3 a as a comonomer through a Stille coupling reaction, and it possesses a narrow band gap and low energy levels. In organic field effect transistors (OFETs), PIDTOTT exhibited unipolar n‐type semiconductor characteristics with unexpectedly high electron mobility (up to 0.14 cm² V^?1 s^?1), despite its rather disordered chain packing.     

Broadband Visible‐Light‐Harvesting trans‐Bis(alkylphosphine) Platinum(II)‐Alkynyl Complexes with Singlet Energy Transfer between BODIPY and Naphthalene Diimide Ligands

A heteroleptic bis(tributylphosphine) platinum(II)‐alkynyl complex ( Pt‐1 ) showing broadband visible‐light absorption was prepared. Two different visible‐light‐absorbing ligands, that is, ethynylated boron‐dipyrromethene (BODIPY) and a functionalized naphthalene diimide (NDI) were used in the molecule. Two reference complexes, Pt‐2 and Pt‐3 , which contain only the NDI or BODIPY ligand, respectively, were also prepared. The coordinated BODIPY ligand shows absorption at 503 nm and fluorescence at 516 nm, whereas the coordinated NDI ligand absorbs at 594 nm; the spectral overlap between the two ligands ensures intramolecular resonance energy transfer in Pt‐1 , with BODIPY as the singlet energy donor and NDI as the energy acceptor. The complex shows strong absorption in the region 450 nm–640 nm, with molar absorption coefficient up to 88 000 M ^?1 cm^?1. Long‐lived triplet excited states lifetimes were observed for Pt‐1 – Pt‐3 (36.9 μs, 28.3 μs, and 818.6 μs, respectively). Singlet and triplet energy transfer processes were studied by the fluorescence/phosphorescence excitation spectra, steady‐state and time‐resolved UV/Vis absorption and luminescence spectra, as well as nanosecond time‐resolved transient difference absorption spectra. A triplet‐state equilibrium was observed for Pt‐1 . The complexes were used as triplet photosensitizers for triplet–triplet annihilation upconversion, with upconversion quantum yields up to 18.4 % being observed for Pt‐1 .