Preparation and Characterization of 6-<Emphasis Type="Italic">O</Emphasis>-(4-stearyloxytrityl)Cellulose acetate Langmuir–Blodgett Films

Multilayer films of 2,3-di-O-acetyl-6-O-(4-stearyloxytrityl)cellulose (ASTC) were prepared and investigated. The fairly high surface pressure (π)–area (A) isotherms (36– 47 mN/m) suggest that the balky and hydrophobic trityl group contribute to form a condensed monolayer. The cellulose derivative formed a homogeneous monolayer at 10 mN/m. The monolayer on the water surface was transferred successfully at 10 mN/m onto various substrates by modifying the preparation methods, to form Z-type multilayer films. The ultraviolet–visible (UV–Vis) absorbance was independent of the number of layers, indicating that each layer is made of definite number of anhydroglucose unit (AGU). The monolayer thickness determined from atomic force microscope (AFM) and ellipsometry was calculated to be about 1.9 nm, suggesting that the long alkyl chain in the film has a so-called hairy-rod type structure. This is the first paper about the Z-type LB film prepared from cellulose derivatives having long mono-alkyl chain only at 6-O-position.     

Aggregation and photoisomerization of amphiphilic crown-ether styryl dye in monolayers at the interface

The molecules oftrans-isomer of styryl dye1a, containing the benzo-18-crown-6 moiety and the methoxybenzothiazole residue with theN-octadecyl substituent, were shown to form stable, highly ordered monolayers at the water/air interface. Increasing the surface pressure of the monolayer results in the formation of the H-aggregated molecules of compound1a. The H-aggregates tend to dissociate to the monomerictrans-form, when the monolayer forms in the Langmuir-Blodgett film (LB film). The light irradiation of the LB films leads to the partially reversibletrans-cis-photoisomerization of compound1a, whose efficiency is much lower than that observed in an acetonitrile solution of1a. The aggregation of cis-1a isomers in the LB film is suggested to hamper the reversecis-trans-isomerization. The aggregation oftrans-1a molecules in the LB films does not occur in air, but, after dipping in an aqueous solution, molecules of the LB film slowly form J-aggregates. A model of the structural organization oftrans-1a molecules in the LB films was proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2490–2496, October, 1996.     

Photophysical and Photoelectric Properties of 2—{[4—（N—Hexadecyl—N—methylamino）phenyl]methylene}—propanedinitrile

2-{[4-(N-Hexadecyl-N-methylamino)phenyl]methylene}-propanedinitrile(HMAPN) with typical donor-π-acceptor(D-π-A）structure was synthesized.It could be easily assembled into stable films by LB technique.The photophysical properties of HMAPN were investigated in solution and on LB films.The photoelectric properties of HMAPN were examined and the anodic photocurrent of the ITO electrode modified by the monolayer LB film of HMAPN was measured as 835 nA/cm^2 under the white light of 218.2 mW/cm^2 without bias voltage.The effects of light intensity,bias voltage on the photocurrent were discussed.The possible mechanism of the photocurrent formation was given.     

Preparation of phthalocyanine-bound myristoyl celluloses for photocurrent generation system

The influences of two structural modifications on the photocurrent generation performance of the Langmuir–Blodgett (LB) film of the 6-O-phthalocyaninyl cellulose derivative were investigated. These structural modifications were the substituent groups at the O-2 and O-3 positions, and the central metal of the phthalocyanine moiety. Specifically, 6-O-Zn/phthalocyaninyl- (8a) and Pd/phthalocyaninyl (8b) -2,3-di-O-myristoylcelluloses were prepared instead of 6-O-Zn/phthalocyaninyl-2,3-di-O-myristylcellulose (2). The LB monolayer film of compound 8a on an indium thin oxide electrode showed higher photocurrent generation performance than that of compound 2. This suggested that myristoyl groups (C-14 acyl groups) were more beneficial to photocurrent generation than myristyl groups (C-14 alkyl groups), as the substituent at the O-2 and O-3 positions. The LB monolayer film of compound 8b showed photocurrent generation from 500 to 700 nm, although a blue-shift in the Q-band maximum was observed. The photocurrent generation performance of compound 8b was significantly higher than that of compound 8a. This indicated that Pd was more beneficial to photocurrent generation than Zn. The film of compound 8b prepared by the horizontal lifting method showed better photocurrent generation performance than that prepared by the vertical dipping method. Consequently, compound 8b is a complementary material to the porphyrin-appended cellulose derivative (1) for photocurrent generation system.     

Dis-aggregation of an insoluble porphyrin in a calixarene matrix: characterization of aggregate modes by extended dipole model

In this paper, the different aggregation modes of a water-insoluble porphyrin (EHO) mixed with an amphiphilic calix[8]arene (C8A), at the air-water interface and in Langmuir-Blodgett (LB) film form, are analyzed as a function of the mixed composition. The strategy used to control the EHO aggregation has consisted of preparing mixed thin films containing EHO and C8A, in different ratios, at the air-water interface. Therefore, the increase of the C8A molar ratio in the mixed film diminishes the aggregation of the EHO molecules, although such an effect must be exclusively related to the dilution of the porphyrin. The reflection spectra of the mixed C8A-EHO films registered at the air-water interface, show a complex Soret band exhibiting splitting, hypochromicity and broadening features. Also, during the transfer process at high surface pressure, it has been shown that the EHO molecules are ejected from the C8A monolayer and only a fraction of porphyrin is transferred to the solid support, in spite of a complete transfer for the C8A matrix. The complex structure of the reflection spectra at the air-water interface, as well as the polarization dependence of the absorption spectra for the mixed LB films, indicate the existence of four different arrangements for the EHO hosted in the C8A matrix. The aggregate formation is governed by two factors: the attraction between the porphyrin rings which minimizes their separation, and the alkyl chain interactions, that is, hydrophobic effect and/or steric hindrance which determine and restrict the possible aggregation structures. By using the extended dipole model, the assignment of the spectral peaks observed to different EHO aggregates is shown.     

Preparation of Langmuir–Blodgett monolayer films of (zinc(II) phthalocyanine)-containing cellulose derivative; the use of 2,3-di-O-myristyl cellulose as a scaffold

The 6-O-phthalocyanine cellulose derivative, 2,3-di-O-myristyl-6-O-[p-(9(10),16(17),23(24)-tri-tert-butyl-2-zinc(II)phthalocyaninyl-benzoyl)cellulose (8e) was synthesized in a high yield with the degree of substitution of 0.33 for the phthalocyaninyl group (DS_{phthalocyanine}) via the esterification of 2,3-di-O-myristyl cellulose (1) with the mono-substituted phthalocyanine derivative ([9(10),16(17),23(24)-tri-tert-butyl-2-[4-(carboxy)phenoxy]phthalocyaninato]zinc(II), 7). A chloroform solution of compound 8e was more stable under illumination than that of low molecular weight phthalocyanine, [2(3),9(10),16(17),23(24)-tetrakis(tert-butyl)phthalocyaninato]zinc(II). Langmuir–Blodgett (LB) monolayer films of compound 8e were prepared on a variety of different substrates using the vertical dipping method with an annealing time of 5 min. An LB monolayer film of compound 8e on an indium tin oxide (ITO) electrode exhibited a photocurrent generation performance in the range of 600–700 nm. The photocurrent density of the film composed of 8e at 680 nm was better than that of 2,3-di-O-myristyl-6-O-(zinc(II) phthalocyaninyl) cellulose (3) which was the corresponding phthalocyanine-containing cellulose synthesized through a phthalocyanine-ring forming reaction on the cellulose backbone according to an existing procedure.     

First Cellulose Langmuir‐Blodgett Films towards Photocurrent Generation Systems

Langmuir‐Blodgett films of a cellulose derivative containing porphyrins, porphyrin‐cellulose, were fabricated in order to construct a cellulose‐based molecular photocurrent generation system. On visible light illumination of the LB monolayer film deposited on an ITO electrode, anodic photocurrents were observed with a quantum yield of 1.6% at an applied potential of 0 V versus SCE, and 3.8–4.6% at 0.2–0.3 V versus SCE. These values indicate that the self‐quenching of the photoexcited porphyrins in the cellulose LB film was suppressed, while porphyrin moieties in the LB film had a densely packed structure. This is because the porphyrins are located at a distance of approximately 1.0 nm along the cellulose backbone.

     

Electrochemical properties of protoporphyrin IX zinc(II) films

The electrochemical properties of protoporphyrin IX zinc(II) (ZnPP) films on indium-tin oxide (ITO) substrate have been studied for three types of films with different arrangements, which were an adsorbed film of ZnPP and LB films of ZnPP and its hybrid with hexadecyltrimethylammonium bromide. Cyclic voltammetry (CV) measurement showed that, as the adsorbed amount of ZnPP increases, an irreversible oxidation peak of ZnPP film is intensified. This reveals that electrochemical properties depend on the adsorbed amount rather than the orientation of porphyrin molecules. It was also supported from CV measurement and ultraviolet-visible absorption spectroscopy that porphyrins adsorbed on ITO substrate were desorbed after the single scan of potential. Additionally, photoresponse of these ZnPP films was investigated by photocurrent measurement. The photocurrent generation is due to carboxylic acid moieties but not ZnPP macrocycles.     

Preparation and characterization of redox cellulose Langmuir–Blodgett films containing a ferrocene derivative

The 3‐ferrocenoylpropanoyl group, one of the redox species, was introduced at C‐2 and/or C‐3 positions of 6‐O‐(4‐stearyloxytrityl)cellulose. The spreading behavior of the cellulose derivatives on the water surface and the properties of Langmuir–Blodgett (LB) films were investigated. The surface pressure–area isotherm of the cellulose monolayer was changed by the subphase temperature. Uniform monolayers of 6‐O‐(4‐stearyloxytrityl)cellulose 3‐ferrocene propionate (STCFc) could be deposited successively onto several substrates by the horizontal lifting method at 10 mN m^?1, and this produced X‐type LB films. The successive uniform depositions of STCFc were confirmed by ultraviolet–visible absorption spectra. X‐ray diffraction measurements indicated that the thickness of the STCFc molecules in the LB films was 1.99 nm. Fourier transform infrared spectroscopy measurements supported the idea that hydrocarbon chains in the LB films were highly ordered (trans‐zigzag) and oriented considerably perpendicular to the surface of the substrate. Moreover, the C?O group of the ferrocenoyl groups was perpendicular to the surface of the substrate, and the ferrocene group was occupied in the water phase. Cyclic voltammograms for the STCFc monolayer on a gold electrode exhibited surface waves. The interfacial electron‐transfer process between the redox site incorporated into the cellulose LB monolayer and the electrode surface was fast enough at a scanning rate lower than 100 mV s^?1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5023–5031, 2005     

Immobilization of porphyrins in poly(hydroxymethylsiloxane)

Three tetracationic porphyrins differing in the position of charged nitrogen atoms on the peripheral substituents — 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP4), 5,10,15,20-tetrakis(N-methylpyridinium-2-yl)porphyrin (TMPyP2), 5,10,15,20-tetrakis(4-trimethylammoniophenyl) porphyrin (TMAPP), and hydrophobic 5,10,15,20-tetraphenylporphyrin (TPP), were immobilized by adsorption and encapsulation in poly(hydroxymethylsiloxane) (PHOMS). The so prepared porphyrin-PHOMS composites were characterized by porosimetry, scanning electron microscopy, fluorescence and diffuse reflectance UV-VIS spectroscopy. It was found that porphyrins are immobilized in the PHOMS matrix in the free base monomer form Their irradiation produced singlet oxygen O₂(¹Δ_g) with the lifetime of 10–30 μs.     

J-aggregation of a water-soluble tetracationic porphyrin in mixed LB films with a calix[8]arene carboxylic acid derivative

The molecular organization of a mixed film, containing a water-soluble tetracationic porphyrin (TMPyP) and a p-tert-butyl calix[8]arene octacarboxylic acid derivative (C8A), at the air-water interface and on a solid support (LB film), has been investigated. Although the TMPyP aggregation was not detected at the air-water interface, TMPyP J-aggregates have been found in the LB films (Y-type). Unlike tetraanionic porphyrins, for example TSPP, the TMPyP J-aggregates are not induced by a zwitterion formation. The TMPyP J-aggregation is a result of a "double comb" configuration, where porphyrins from opposite layers are interwoven in a linear infinite J-aggregate. Our results confirm that TMPyP molecules tend to self-aggregate strongly, provided the electrostatic repulsions of their peripheral groups are cancelled by the anionic groups of the C8A matrix.     

The incorporation of C_(60) in cavities of 5,10,15,20-tetra-4-oxy(2-stearic acid)phenyl porphyrin in LB film

The structure and properties of mixed monolayer or LB film of 5,10,15,20-tetra-4-oxy(2-stearic acid)phenyl porphyrin/C60 were studied. A isotherms and small angle X-ray diffraction (SAXD) results show that C60 molecules were incorporated into the cavities of por-phyrin molecules in mixed monolayer and LB film . UV-vis spectra of mixed LB films show that the absorption intensity of porphyrin varied compared with pure porphyrin film, probably arising from the interactions between C60 and porphyrin ring. C60 molecules in mixed systems are well-dispersed. The TPP(CO2H)/C60 mixed LB film is a kind of two-dimensional host-guest system.     

Synthesis of (zinc(II) phthalocyanine)-containing cellulose derivative using phthalocyanine-ring formation reaction

2,3-Di-O-myristyl-6-O-(zinc(II) phthalocyaninyl) cellulose (5) was synthesized from cellulose (1) by five reaction steps via 6-O-(3′,4′-dicyanophenyl)-2,3-di-O-myristyl cellulose (4). The key reaction was phthalocyanine-ring formation on a cellulose backbone, that is, the reaction of compound 4 with o-phthalodinitrile in the presence of hexamethyldisilazane and zinc acetate in DMF afforded to compound 5 in 35.4 % yield. Consequently, the degree of substitution with phthalocyanine moieties of compound 5 was 0.38. The LB monolayer film of compound 5 on an indium tin oxide (ITO) electrode was found to show photocurrent generation performance at 680 nm.     

Preparation and characterization of cellulose nanocomposite films with two different organo-micas

The mechanical properties, morphologies, and gas barriers of hybrid films of cellulose with two different organoclays are compared. Dodecyltriphenyl-phosphonium-mica (C₁₂PPh-mica) and hexadecyl-mica (C₁₆-mica) were used as reinforcing fillers in the fabrication of the cellulose hybrid films. The cellulose hybrid films were synthesized from N-methyl-morpholine-N-oxide (NMMO) solutions with the two organo-micas, and solvent-cast at room temperature under vacuum, yielding 15–20 μm thick films of cellulose hybrids with various clay contents. We found that the addition of only a small amount of organoclay is sufficient to improve the mechanical properties and gas barriers of the cellulose hybrid films. Even polymers with low organoclay contents (1–7 wt %) were found to exhibit much higher strength and modulus values than pure cellulose. The addition of C₁₂PPh-mica was more effective than that of C₁₆-mica with regards to the initial tensile modulus, whereas the addition of C₁₆-mica was more effective than that of C₁₂PPh-mica with regards to the gas barrier of the cellulose matrix. The intercalations of the polymer chains in the clays were examined with wide-angle X-ray diffraction (XRD) and electron microscopy (SEM and TEM).     

Spectroscopic and optical characterization of porphyrin chromophores incorporated into ultrathin polyimide films

Polyamic acid (PAA) containing free-base porphyrin and zinc(II) porphyrin chromophores was synthesized by copolymerization of diphenylether-type tetracarboxylic dianhydride and diamines. The monolayer of the alkylamine salts of PAA (PAASs) at the air/water interface was deposited on solid substrates by the Langmuir-Blodgett (LB) technique. The PAAS LB films thus obtained were converted to polyimide (PI) LB films by chemical treatment. The fluorescence of porphyrin moieties in the PI LB film was observed, because of the weak electron-accepting properties of the diphenylether unit. Therefore, the photophysically important processes, such as photoinduced electron transfer, excitation energy transfer, and excitation energy migration could be investigated in relation to the layered nanostructures of the ultrathin PI films. The fluorescence spectrum suggested that the aggregation of porphyrin moieties in the PI LB films was effectively prevented by the use of polymeric films. The surface plasmon (SP) measurement showed that the thickness of the monolayers was 0.9-1.0 nm for PAAS films and 0.32-0.40 nm on average for PI LB films. The absorption dichroism of the Soret band of porphyrin indicated that porphyrin moieties in the PAAS and PI LB films are oriented in parallel with the substrate. These results showed that the orientation and the spatial distribution of porphyrin units can be efficiently regulated in the PI LB films in a nanometer dimension.     

A new stilbene glycoside from the <Emphasis Type="Italic">n</Emphasis>-butanol fraction of <Emphasis Type="Italic">Veratrum dahuricum</Emphasis>

A new stilbene glycoside, 5-methylresveratrol-3,4′-O-β-D-diglucopyranoside (1), was isolated from the n-butanol fraction of the rhizomes of Veratrum dahuricum, together with five known stilbenoids: resveratrol-3-O-β-D-glycoside (2), 4′-methylresveratrol-3-O-β-D-glycoside (3), oxyresveratrol-4′-O-β-D-glycoside (4), oxyresveratrol-3-O-β-D-glycoside (5), and oxyresveratrol-3,4′-O-β-D-diglycoside (6), and found for the first time in the investigated plant. The structures of six isolates were identified on the basis of 1D and 2D NMR data. Compounds 1–6 showed platelet aggregation inhibition, and compound 1 had an IC₅₀ value of 383.6 μM against platelet aggregation induced by AA. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 279–282, May–June, 2009.     

A comparative Langmuir-Blodgett study on a set of covalently linked porphyrin-based amphiphiles: a detailed atomic force microscopic study

A set of covalently linked phenyl-amidophenyl-substituted porphyrin amphiphiles with n-C15H31 tails have been synthesized and completely characterized. These amphiphiles form good Langmuir-Blodgett (LB) films at the air/water interface. Mean molecular areas for the series were measured from the isotherms and found to increase as the number of aliphatic chains increased from one to four. No influence of the subphase pH was observed on the isotherms. LB films can be transferred successfully onto different solid surfaces. The LB films were characterized using tapping mode atomic force microscopy (AFM). Bis-, tris-, and tetra-substituted porphyrins were found to be fairly good film-forming amphiphiles, whereas irregular aggregates were seen in the case of the monosubstituted porphyrin amphiphile. Multilayers were also formed with tetra-substituted amphiphiles on mica. Detailed AFM studies of tetra-substituted amphiphiles have been carried out to investigate the effect of preparation procedure and solid substrates on film formation and transfer. The absorption and fluorescence spectra for the amphiphiles in solution and LB films deposited onto mica and glass were recorded, which demonstrated the successful transfer of LB films onto the substrates and provided more information about the arrangement of porphyrin molecules within the LB films. For comparison, self-assembled monolayers (SAMs) and the cast thin films of the amphiphiles were prepared and characterized.     

Langmuir-Blodgett films of a cationic zinc porphyrin-imidazole-functionalized fullerene dyad: formation and photoelectrochemical studies

Electron donor-acceptor dyad ensembles of a water-soluble cationic zinc porphyrin (viz., zinc tetrakis(N-methylpyridinium)porphyrin tetrachloride, Zn(TMPyP)) and a C60 derivative that bears an imidazole ligand (viz., 2-(phenylimidazolyl)fulleropyrrolidine, C60im) were assembled during the formation of Langmuir and then Langmuir-Blodgett (LB) films. Surface pressure versus surface area isotherms and surface pressure time profiles, as well as Brewster angle microscopic images documented that the Langmuir films formed were remarkably stable. Subsequently, these Langmuir films were transferred onto different solid substrates, by using the LB technique, for spectroscopic and photoelectrochemical characterization. The UV-vis spectroscopic investigations confirmed that the water-soluble Zn(TMPyP) was, indeed, transferred together with C60im in the LB films. Upon visible light illumination of these LB films, deposited on the ITO transparent conductive supports, a photocurrent generated in the C60im-Zn(TMPyP) system is ascribed to an efficient photoinduced electron transfer from the electron donor, porphyrin singlet excited-state to the electron acceptor, C60. Overall, internal photon-to-current efficiency, IPCE, of the photoanodic current generation (with ascorbate as a sacrificial electron donor) in the ITO/C60im-Zn(TMPyP)/ascorbate/Pt construct is over 5x larger than that of the photocathodic system (with methyl viologen, MV2+, as a sacrificial electron acceptor) in the ITO/Zn(TMPyP)-C60im/MV2+/Pt construct. Highly ordered film stacking favors vectorial electron transfer within the dyad, giving rise to the highest IPCE values of 2.5% determined for a photoanode that was composed of around 20 monolayer films.     

嵌入花生酸镉单层中的卟啉-紫精分子聚集行为的研究

本文制备了卟啉-紫精与花生酸镉混合LB膜, 用紫外可见光谱研究了膜中卟啉基团的聚集及取向, X射线衍射说明混合LB膜具有层状有序的周期结构。扫描电镜结果表明: 通过调节膜的表面压可使聚集成"微畴"的卟啉-紫精均匀分布在花生酸镉单分子层中, 随膜表面压的增大, 小的"微畴"相互连接形成更大的"微畴"。电子衍射说明混合膜中两组份分相存在, 且都为六角对称的有序结构。     

New oligomeric proanthocyanidin glycosides platanoside-A and platanoside-B from <Emphasis Type="Italic">Platanus orientalis</Emphasis> trunk bark

Two new oligomeric proanthocyanidin glycosides were isolated from trunk bark of Platanus orientalis. Their structures and relative configurations were found to be 7-O-β-D-Glcp-(–)-epicatechin-(4β-8)-(–)-epicatechin(4β-8)-(–)-epicatechin-3-O-gallate (platanoside-A) and 7-O-β-D-Glc \textp\xrightarrow6 {\text{p}}\xrightarrow{6} galloyl-(+)-catechin-3-O-gallate(4α-8)-(–)-epicatechin-3-O-gallate-(4β-8)-(–)-epicatechin-3-O-gallate-(4β-8)-5-O-β-D-Glcp-(–)epicatechin-3-O-gallate (platanoside-B).