Study of thermal diffusivity of nanofluids with bimetallic nanoparticles with Au(core)/Ag(shell) structure

The thermal diffusivity of Au/Ag nanoparticles with core/shell structure, at different compositions (Au/Ag = 3/1, 1/1, 1/3, 1/6), was measured by using the mismatched mode of the dual-beam thermal lens (TL) technique. This study determines the effect of the bimetallic composition on the thermal diffusivity of the nanofluids. In these results we find a lineal increment of the nanofluid it thermal diffusivity when the Ag shell thickness is increased. Our results show that the nanoparticle structure is an important parameter to improve the heat transport in composites and nanofluids. These results could have importance for applications in therapies and photothermal deliberation of drugs. Complementary measurements with UV-vis spectroscopy and TEM, were used to characterize the Au(core)/Ag(shell) nanoparticles.     

Study of gold nanoparticles effect on thermal diffusivity of nanofluids based on various solvents by using thermal lens spectroscopy

Dual beam thermal lens technique is used to determine the thermal diffusivity of different solvents in presence of gold nanoparticles. In this technique an Ar⁺ laser (wavelength 514 nm, power 40 mW) and intensity stabilized He-Ne laser were used as the heating source and probe beam respectively. The experimental results showed that thermal diffusivity values of the studied solvents (water, ethanol and ethylene glycol (EG)) were enhanced by the presence of gold nanoparticles.     

Thermal diffusivity study of cheese fats by thermal lens detection

In this paper we used thermal lens spectrometry to determine the thermal diffusivity of cheese fats. We have used equal concentrations of cheese fats from oaxaca, chihuahua, gouda, manchego and mozzarella cheeses at 42°C temperature. The two lasers mismatched mode experimental configuration was used with a He-Ne laser, as a probe beam and an Ar⁺ laser as the excitation one. The characteristic time constant of the transient thermal lens was obtained by fitting the theoretical expression to the experimental data in order to obtain the thermal diffusivity of the cheese fat samples. This measured thermal property may contribute to a better understanding of the cheese fats quality, which is very important in food industry.     

Application of X-ray photoelectron spectroscopy to characterization of Au nanoparticles formed by ion implantation into SiO2

In X-ray photoelectron spectroscopy (XPS) of Au nanoparticles, the width of 5d valence band changes with Au particle size. This enables us to estimate the size of Au nanoparticles by using XPS. In this work, the 5d-band width has been measured for Au nanoparticles formed by ion implantation into SiO₂. The 5d-band width is found to be correlated strongly with the Au concentration. As the Au concentration increases, the 5d-band width becomes larger, indicating that the Au nanoparticles with the larger size tend to be formed in the vicinity of the projected range of Au ions. This correlation agrees very well with the results from transmission electron microscopy.     

Laser reflectance relaxation spectroscopy: Determination of thermal diffusivity in thin films of gold

The technique of thermal modulation is applied to the study of transient thermal properties of thin films of Au. Relaxation spectra as seen in the reflected laser light give a value for the thermal diffusivity of Au as κ ? 1.2 cm²/sec, comparable to previous data for the bulk metal. Versatility and potentials of the laser reflectance relaxation spectroscopy are discussed.     

Transient thermal characterization of micro/submicroscale polyacrylonitrile wires

In this work, the thermal diffusivity of single polyacrylonitrile (PAN) wires with diameters from 4.62 μm down to 324 nm is measured by using our recently developed transient electro-thermal technique. The wires span from 23 μm to 126.2 μm in our measurement. Since PAN wires are dielectric, a thin Au film is coated on the surface of the wires to make them conductive. In the experiment, a step current (with ∼2 μs rising time) is fed to the sample. The sample is heated and takes a certain time to reach its steady thermal state. The temperature rising response of the sample is sensed by measuring the resistance change of the thin Au coating. From the average temperature evolution of the sample, the thermal diffusivity can be extracted. Three PAN wires with different diameters are synthesized using the electro-spinning technique and are measured to obtain their thermal diffusivities (around 1.53×10^-7 m²/s), which are slightly smaller than the bulk value. PACS 65.80.+n; 66.30.Xj; 44.10.+i     

Thermal diffusivity of rhodamine 6G incorporated in silver nanofluid measured using mode-matched thermal lens technique

Dual beam mode-matched thermal lens method has been employed to measure the heat diffusion in nanofluid of silver with various volumes of rhodamine 6G, both dispersed in water. The important observation is an indication of temperature dependent diffusivity and that the overall heat diffusion is slower in the chemically prepared Ag sol compared to that of water. The experimental results can be explained assuming that Brownian motion is the main mechanism of heat transfer under the present experimental conditions. Light induced aggregation of the nanoparticles can also result in an anomalous diffusion behavior.     

Thermal lens investigation in amorphous SiN

In this work we report the use of thermal lens (TLs) technique to determine the thermo-optical parameters, such as thermal conductivity (K), thermal diffusivity (D) and the optical path dependence with temperature (ds/dT) of amorphous SiN. Our results indicate that ds/dT is positive at room temperature. Moreover, the obtained values of thermal diffusivity and thermal conductivity are in good agreement with that found in the literature.     

The effect of preadsorbed K on the size distribution of Au nanoparticles on TiO2(1 1 0) surface

The effect of K on the morphology of Au nanoparticles deposited on TiO₂(1 1 0) surface is investigated by STM-STS and AES methods. For comparison, the enhanced concentration of oxygen defect sites generated by Ar⁺ bombardment was also studied. It was found that both the K additive and the oxygen defect sites induce a pronounced decrease in the average size of the Au nanoparticles evolved at 320 K. On the clean TiO₂(1 1 0) the average size of Au particles is 4.3 nm at approximately monolayer coverage of gold, while in the presence of K or oxygen vacancies this value decreased to 2.5 nm. In spite of the reduced average diameter detected at room temperature, the mean size of the Au nanoparticles increased significantly from 2.5 nm up to 7 nm on the effect of annealing at 500-700 K for K precoverages of 0.3-1 ML. For the clean and the Ar⁺ pretreated TiO₂(1 1 0) surfaces the mean size of the Au particles changed only slightly on the effect of the same thermal treatments.     

Enhanced dispersion and stability of gold nanoparticles on stoichiometric and reduced TiO2(1 1 0) surface in the presence of molybdenum

Mo, Au and their coadsorbed layers were produced on nearly stoichiometric and oxygen-deficient titania surfaces by physical vapor deposition (PVD) and characterized by low energy ion scattering (LEIS), X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and scanning tunnelling microscopy (STM). The behavior of Au/Mo bimetallic layers was studied at different relative metal coverages and sample temperatures.

STM data indicated clearly that the deposition of Au on the Mo-covered stoichiometric TiO₂(1 1 0) surface results in an enhanced dispersion of gold at 300 K. The mean size of the Au nanoparticles formed at 300 K on the Mo-covered TiO₂(1 1 0) was significantly less than on the Mo-free titania surface (2 ± 0.5 nm and 4 ± 1 nm, respectively). Interestingly, the deposition of Mo at 300 K onto the stoichiometric TiO₂(1 1 0) surface covered by Au nanoparticles of 3–4 nm (0.5 ML) also resulted in an increased dispersity of gold. The driving force for the enhanced wetting at 300 K is that the Au–Mo bond energy is larger than the Au–Au bond energy in 3D gold particles formed on stoichiometric titania. In contrast, 2D gold nanoparticles produced on ion-sputtered titania were not disrupted in the presence of Mo at 300 K, indicating a considerable kinetic hindrance for breaking of the strong Au-TiO_x bond.

The annealing of the coadsorbed layer formed on a strongly reduced surface to 740 K did not cause a decrease in the wetting of titania surface by gold. The preserved dispersion of Au at higher temperatures is attributed to the presence of the oxygen-deficient sites of titania, which were retained through the reaction of molybdenum with the substrate. Our results suggest that using a Mo-load to titania, Au nanoparticles can be produced with high dispersion and high thermal stability, which offers the fabrication of an effective Au catalyst.     

Enhanced photoluminescence from gallium arsenide semiconductor coated with Au nanoparticles

We demonstrate a method for improving photoluminescence of gallium arsenide semiconductor by simply coating a thin layer of Au nanoparticles on its surface. Further focused ion beam bombardment at the sputter-coated Au film was conducted to control the size, the distribution, and the morphology of the Au nanoparticles via the changes of the focused ion-beam irradiation conditions. Photoluminescence of GaAs coated with the Au nanoparticles with average size of 5 nm in diameter is enhanced to about threefold relative to that of pure GaAs. Numerical calculations were conducted based on finite-different time-domain method. Results indicated that the enhancement is mainly attributed to the contribution of local surface plasmon resonance of Au nanoparticles.     

Rapid synthesize of gold nanoparticles by microwave irradiation method and its application as an optical limiting material

We present rapid synthesis of gold nanoparticles by microwave irradiation method. Sample with average particle size 7.7 nm is obtained from TEM. Linear and nonlinear optical studies of the prepared samples are discussed. Reverse saturable absorption (RSA) at longitudinal surface plasmon resonance (SPR) in gold nanoparticles (Au NPs) have been observed using Z-scan and transient absorption techniques with 532 nm laser pulses. Such RSA behavior makes Au NPs an ideal candidate for optical limiting applications.     

One-pot synthesis of gold/poly(3,4-ethylendioxythiophene) nanocomposite

In this paper, we report the preparation of highly stable gold nanoparticles/poly(3,4-ethylendioxythiophene) nanocomposites by a one-pot chemical route in aqueous medium without surfactants to increase the solubility of the monomer (3,4-ethylendioxythiophene, EDOT) or to stabilize gold nanoparticles (Au NPs). The generation of the nanocomposite was followed by UV–Visible transmission spectroscopy combined with multivariate curve resolution alternating least squares analysis to deconvolute the individual spectra of the different species generated in the synthesis: oligomers, polymer and gold nanoparticles. The plasmon band observed at 530 nm during the synthesis step indicates the generation of gold nanoparticles. The influence of monomer and metal precursor concentration and their concentration ratios on Au NP size were analyzed. The electrochromic properties of the composite were investigated by UV–Visible absorption spectroelectrochemistry, being mainly related to polymer oxidation and reduction. The main difference observed is the hypsochromic shift of the polymer spectra due to the gold nanoparticles inside the polymer. Multicyclic spectroelectrochemical experiments evidence a high stability and adhesion of the nanocomposite.     

Laser induced synthesis of nanoparticles in liquids

The review of results on nanoparticles formation is presented under laser ablation of Ag, Au, and Cu-containing solid targets in liquid environments (H₂O, C₂H₅OH, C₂H₄Cl₂, etc.). X-ray diffractometry (XRD), UV-vis optical transmission spectrometry, and high resolution transmission electron microscopy (HRTEM) characterize the nanoparticles. The morphology of nanoparticles is studied as the function of both laser fluence and nature of the liquid. The possibility to control the shape of nanoparticles by ablation of an Au target by an interference pattern of two laser beams is demonstrated. Formation of alloyed Au-Ag and Ag-Cu nanoparticles is reported under laser exposure of a mixture of individual nanoparticles. The effect of internal segregation of brass nanoparticles is discussed due to their small lateral dimensions. The factors are discussed that determine the distribution function of particles size under laser ablation. The influence of laser parameters as well as the nature on the liquid on the properties of nanoparticles is elucidated.     

Growth of polymer–metal nanocomposites by pulsed laser deposition

Complex polymer–metal nanocomposites have a wide range of applications, e.g. as flexible displays and packaging materials. Pulsed laser deposition was applied to form nanostructured materials consisting of metal clusters (Ag, Au, Pd and Cu) embedded in a polymer (polycarbonate, PC) matrix. The size and amount of the metal clusters are controlled by the number of laser pulses hitting the respective targets. For Cu and Pd, smaller clusters and higher cluster densities are obtained as in the cases of Ag and Au due to a stronger reactivity with the polymers and thus a lower diffusivity. Implantation effects, differences in metal diffusivity and reactivity on the polymer surfaces, and the coalescence properties are discussed with respect to the observed microstructures on PC and compared to the metal growth on poly (methyl methacrylate), PMMA.     

Protection of iron against corrosion by coverage with Au nanoparticles and n-hexylthiol mixed films

Through a one-step thermal reaction, Au nanoparticles were synthesized and self-assembled mixed films of Au nanoparticles and n-hexylthiol were prepared on iron surface. The size distribution and shape of Au nanoparticles were examined using transmission electron microscopy (TEM). Results of two electrochemical methods - electrochemical impedance spectroscopy (EIS) and polarization curves indicate that self-assembled mixed films can form on the iron surface and prevent it from corrosion effectively. Energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) measurements were applied to identify the formation of the mixed films on iron surface.     

Mechanisms of ion-beam-enhanced diffusion in amorphous silicon

We have investigated ion-beam-enhanced diffusion of Au in undoped and B doped amorphous Si. The diffusion coefficients depend linearly on ion flux and exibit an Arrhenius-like temperature dependence with an activation energy of 0.37 eV in the temperature range 200–350° C. Moreover the diffusivity is enhanced by a factor of 5 by B-doping at a concentration of 1×10²⁰ atoms/cm³. A similar enhancement is observed in thermal diffusion of Au which has an activation energy of 1.5 eV. On the basis of these results a model for the ion-beam-enhanced diffusion of Au is proposed where the high density of defects present in amorphous Si act as traps for the fast moving interstitial Au atoms. The effectiveness of this trapping process can be changed by the high concentration of mobile defects generated by the beam and also by a change in the charge state of the traps induced by the presence of B.     

Synchrotron-Radiation Photoemission Study of Growth and Stability of Au Clusters on Rutile TiO2(110)-1×1

利用同步辐射高分辨光电子能谱研究了金团簇在部分还原TiO₂-(1×1)表面的生长和稳定性．价带谱实验结果观察到非常少量金团簇的沉积导致了Ti3+的3d峰完全消失,表明金团簇成核在TiO₂-(1×1)表面的氧缺陷位．Au4f芯电子光电子能谱实验结果证明了TiO₂-(1×1)表面氧缺陷位向金团簇转移电荷．还对比研究了化学剂量比和部分还原的TiO₂-(1×1)表面上金团簇的热稳定性．当金团簇尺寸相近时部分还原的TiO₂-(1×1)表面上金团簇要比化学剂量比的TiO₂-(1×1)面上金团簇稳定;在相同的表面上尺寸大的金团簇要比尺寸小的金团簇稳定．     

Gold nanoparticles produced by laser ablation in water and in graphene oxide suspension

The comparison between two different approaches based on the use of the laser ablation in medium to synthetise gold nanoparticles is presented and discussed. Deionised water as well as a graphene oxide (GO) suspension in deionised water have been employed as solution to produce gold nanoparticles by laser ablation. In the former case, the nanoparticles assembly has been stabilised by using surfactants, but in the latter case to avoid undesired effects the use of chemicals was not necessary and Au reduced graphene oxide (Au-rGO) nanocomposites have been obtained. The structure, size and composition of the gold nanoparticles and of the Au–rGO nanocomposites have been monitored by UV–Vis–NIR absorption spectroscopy and Raman spectroscopy, the transmission and scanning electron microscopies and the X-ray energy-dispersive spectroscopy. The presented methodology of Au rGO nanocomposites preparation could represent a green alternative on the production of metallic nanoparticles in biocompatible environment.