应力波在变截面体中的传播特性

对应力波在变截面体中的传播特性进行了理论研究和数值分析。以杆中一维纵波波动理论和谐波分析法为基础，研究截面变化所导致的应力波的波形弥散和波幅变化。推导了与截面变化相关的应力波演化因子，并对由于截面变化所造成的几何弥散等二维效应进行了分析，同时计算了变截面体的几何特征参数和截面变化等因素影响应力波演化规律的特点。     

时域Rankine源法求解有限水深船舶在规则波中的水底压力变化

应用势流理论中的Rankine源面元法和时域步进法,求解了有限水深船舶在规则波中运动的水底压力变化。将速度势分解成基本势、局部势和记忆势,以叠模解作为基本势对自由表面条件和物面条件进行了线性化,通过在水底布置面元来满足水底条件。利用研制的水底压力-水面波浪测量系统,测量了不同入射波船模表面波形与水底压力的时历曲线,理论计算与实验结果符合较好,验证了自编程序的正确性。通过对比二者的等高线图发现,水底压力与表面波形的峰谷有较好的一致性,并且压力较波形更为平滑。     

PROPAGATION OF A LONG WAVE IN A CURVED DUCT (Ⅱ)APPLICATIONS OF MATCHED EXPANSION TO LONG WAVE PROPAGATION THROUGH A HOLE WITH VARIABLE CROSS-SECTION

Only the case in which the parameterε=ka《1 is considered in this paper,where k is the wave number and a is the characteris-tic radius of the cross-section of the hole.The general asymp-totic expansion of the complex velocity potential of a long wave propagating in the hole with variable cross-section is obtained by regular perturbation:The methods of matched asymptotic ex-pansion are employed to calculate the reflection coefficients,scattering coefficients and radiation coefficients at the open ends of the hole when a long wave propagates through it,which may be open at both ends or only at one end.Three examples of different kinds of holes are given to show the way to solve such two-dimensional or three-dimensional problems.     

Numerical simulations of inviscid and viscous free‐surface flows with application to nonlinear water waves

The purpose of the present study is to establish a numerical model appropriate for solving inviscid/viscous free‐surface flows related to nonlinear water wave propagation. The viscous model presented herein is based on the Navier–Stokes equations, and the free‐surface is calculated through an arbitrary Lagrangian–Eulerian streamfunction‐vorticity formulation. The streamfunction field is governed by the Poisson equation, and the vorticity is obtained on the basis of the vorticity transport equation. For computing the inviscid flow the Laplace streamfunction equation is used. These equations together with the respective (appropriate) fully nonlinear free‐surface boundary conditions are solved using a finite difference method. To demonstrate the model feasibility, in the present study we first simulate collision processes of two solitary waves of different amplitudes, and compute the phenomenon of overtaking of such solitary waves. The developed model is subsequently applied to calculate (both inviscid and the viscous) flow field, as induced by passing of a solitary wave over submerged rectangular structures and rigid ripple beds. Our study provides a reasonably good understanding of the behavior of (inviscid/viscous) free‐surface flows, within the framework of streamfunction‐vorticity formulation. The successful simulation of the above‐mentioned test cases seems to suggest that the arbitrary Lagrangian–Eulerian/streamfunction‐vorticity formulation is a potentially powerful approach, capable of effectively solving the fully nonlinear inviscid/viscous free‐surface flow interactions. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydrodynamic forces and moments due to interaction of linear water waves with truncated partial-porous cylinders in finite depth

An exact analytical method is employed for studying the diffraction problems in an ocean due to the presence of a specific type of cylinders. In this current work, two models are studied: (i) a floating surface-piercing truncated partial-porous cylinder, (ii) a surface-piercing truncated partial-porous cylinder placed at the bottom. In both cases, the configuration of the composite cylinder is such that it consists of an impermeable inner cylinder rising above the free surface and a coaxial truncated porous cylinder around the lower part of the inner cylinder with the top of the porous cylinder being impermeable. By using linear water wave theory, a three-dimensional representation of the problem is developed based on eigenfunction expansion method. The condition on the porous boundary is defined by applying Darcy’s law. Pressure and velocity satisfy continuity conditions across the linear interface between the adjacent fluid domains. Hydrodynamic force, moment and wave run-up are calculated by using the velocity potentials. Comparisons are carried out with results of wave diffraction by a floating and bottom-mounted compound cylinder, i.e., when the whole cylinder is non-porous. Handy agreements are observed from these comparisons. Through numerical tests, various experiments are carried out to investigate the impact of various parameters, such as porous coefficients, draft ratio, the ratio of inner and outer radii, the water depth etc., on hydrodynamic force, moment and wave run-up. The results clearly indicate that an appropriate optimal ratio for various parameters may be considered in designing practical ocean structures with minimum adverse hydrodynamic effect. The appearance of resonance in the results and role of porosity in mitigating resonance effect are explained. Proposal to select various appropriate parameters for the best possible effect is put forward.     

Steady mixed convection boundary layer flow over a vertical flat plate in a porous medium filled with water at 4°C: case of variable wall temperature

The problem of steady mixed convection boundary layer flow over a vertical impermeable flat plate in a porous medium saturated with water at 4°C (maximum density) when the temperature of the plate varies as x ^m and the velocity outside boundary layer varies as x ^{2 m} , where x measures the distance from the leading edge of the plate and m is a constant is studied. Both cases of the assisting and the opposing flows are considered. The plate is aligned parallel to a free stream velocity U _∞ oriented in the upward or downward direction, while the ambient temperature is T _∞ = T _m (temperature at maximum density). The mathematical models for this problem are formulated, analyzed and simplified, and further transformed into non-dimensional form using non-dimensional variables. Next, the system of governing partial differential equations is transformed into a system of ordinary differential equations using the similarity variables. The resulting system of ordinary differential equations is solved numerically using a finite-difference method known as the Keller-box scheme. Numerical results for the non-dimensional skin friction or shear stress, wall heat transfer, as well as the temperature profiles are obtained and discussed for different values of the mixed convection parameter λ and the power index m. All the numerical solutions are presented in the form of tables and figures. The results show that solutions are possible for large values of λ and m for the case of assisting flow. Dual solutions occurred for the case of opposing flow with limited admissible values of λ and m. In addition, separation of boundary layers occurred for opposing flow, and separation is delayed for the case of water at 4°C (maximum density) compared to water at normal temperature.     

Numerical simulation of 3D free surface flows,with multiple incompressible immiscible phases. Applications to impulse waves

A numerical method for the solution to the density‐dependent incompressible Navier–Stokes equations modeling the flow of N immiscible incompressible liquid phases with a free surface is proposed. It allows to model the flow of an arbitrary number of liquid phases together with an additional vacuum phase separated with a free surface. It is based on a volume‐of‐fluid approach involving N indicator functions (one per phase, identified by its density) that guarantees mass conservation within each phase. An additional indicator function for the whole liquid domain allows to treat boundary conditions at the interface between the liquid domain and a vacuum. The system of partial differential equations is solved by implicit operator splitting at each time step: first, transport equations are solved by a forward characteristics method on a fine Cartesian grid to predict the new location of each liquid phase; second, a generalized Stokes problem with a density‐dependent viscosity is solved with a FEM on a coarser mesh of the liquid domain. A novel algorithm ensuring the maximum principle and limiting the numerical diffusion for the transport of the N phases is validated on benchmark flows. Then, we focus on a novel application and compare the numerical and physical simulations of impulse waves, that is, waves generated at the free surface of a water basin initially at rest after the impact of a denser phase. A particularly useful application in hydraulic engineering is to predict the effects of a landslide‐generated impulse wave in a reservoir. Copyright © 2014 John Wiley & Sons, Ltd.