一种用于波分复用系统的ATM光交换模型

波分复用是增大通信容量,提高线路利用率的常用技术.本文提出了一种用于波分复用系统的ATM光交换模型.该结构利用波分复用的特点,采用内部多通道互连方式,使其具有易于实现、结构简单、对内部缓存要求较低等优点.并对该模型进行了性能分析,得出了结论.     

应用波分复用改善像束传像系统像质的研究

本文通过分析空间波分复用系统中包散元件的色散平均效应,用线扩散传递函数研究了像束传像性质,由光学成像的本征理论用像束成像信息量分析了波分复用改善像束传像像质的机制,并从实验上验证了上述分析结论.     

光纤菲佐应变传感器的波分频分复用方法

将波分复用技术与空间频率复用技术相结合,提出了新的光纤菲佐应变传感器波分频分复用方法:在粗波分复用(CWDM)的不同波段实现具有不同腔长的光纤菲佐应变传感器的空间频率复用。描述了基于该方法的光纤菲佐应变传感器复用系统的结构、原理及实验结果,讨论了复用技术中可能产生的串扰的影响及其解决方法。实验结果表明,该方法大大提高了光纤菲佐应变传感器的复用能力,可复用40个以上的菲佐应变传感器,且其应变测量精度达±5με,可满足实际应用的要求。     

蚀刻衍射光栅波分复用器件的设计与模拟

近年来光通信飞速发展,波分复用技术(WDM)是满足要求的有效手段.密集波分复用技术已经得到成功商用,其扩展信息传输容量的能力也在不断增强.作为波分复用中最关键的器件,蚀刻衍射光栅(EDG)是平面波导密集波分复用器件中很有发展潜力的一种.本文分析了EDG器件的解复用原理,参量设计,工艺过程.文章最后,建立了一个光栅干涉的简单模型,对设计好的器件参量进行模场形状、谱响应、色散等光栅性能的模拟,得到基本的器件解复用特性,并加以分析.     

用三干涉臂马赫-曾德尔干涉仪制成的光纤密集型波分复用器

提出一种新型的光纤干涉仪 ,它是采用二个 3× 3单模光纤耦合器组成三光纤系统的马赫 -曾德尔 (Mach- Zehnder)干涉仪 ,当干涉仪的三条光纤干涉臂两两之间分别存在长度差Δ L和2Δ L时 ,干涉仪形成了一个波分复用间隔相等的三波分复用器 ,波分复用的波长间隔仅仅取决于ΔL的大小。实验样品的使用波段为 1.55μm,波长复用间隔为 1.6 nm,附加损耗为 0 .6 d B。     

一种新颖的由分插复用器构成的双向WDM网络

提出了一种新颖的双向波分复用网络结构,由多个分插复用器通过单模光纤连接而成。其中,分插复用器是基于声光效应和光纤布拉格光栅的反射特性制成的。由理论分析和实验得到的结果表明,该器件可实现一定数量信道的光信号的双向分插复用。这种双向波分复用光网络可按要求进行设计,使具有某种特征波长的光信号在设定位置的分插复用器中实现分插复用,使其按所设计的光路在波分复用网络中传输。     

多周期双啁啾镜结构的空间解波分复用器

以穿透深度依赖于入射波长的基本双啁啾结构为基础，通过对其中的布拉格膜对进行“周期 重复”的方法来提高空间线性侧向位移，从而实现不同波长的入射光的空间分离，用于高集成度的薄膜空间解波分复用器件的设计.比较了总层数相同的直接双啁啾结构和重复周期为n倍的改进结构，发现后者在理论设计更具有应用优势，同时在实验制作上有更高的容差性 .对空间色散特性曲线在周期重复数较大、入射波长较大的情况下所出现的强烈振荡做出了定性分析. 关键词： 双啁啾结构 空间色散 波分复用 薄膜器件     

光纤马赫—陈德尔干涉型8波分超窄波分复用器的研制

报道了采用７个单模光纤马赫－陈德尔干涉仪进行三级串联而组成的８波分复用器，既保留了干涉型光纤波分复用器超窄波分复用间隔的优点，又消除了其复用路数少的缺点。文中介绍了这类波分复用器的原理、设计方法和制造技术。实验样品的使用波段为１．５μｍ，波长复用间隔为２．４ｎｍ，整个器件的附加损耗约为１．５ｄＢ。     

基于门控循环单元的蛛网形FBG传感网络设计

针对大型结构健康监测对于光纤光栅传感网络的复用容量和维护成本的较高要求,设计了一种蛛网形拓扑结构的传感网络.该结构网络利用波分复用来增加网络的复用容量,并优化了基于门控循环单元的模型来对重叠波长进行解调.设计的新型传感网络具有较高的网络可靠性和网络复用容量,截取蛛网形网络的部分结构进行实验,设计了四种故障情况进行对比,...     

二维三角晶格光子晶体三通道解波分复用器

为了实现结构紧凑、高透射率的解波分复用功能,在二维三角晶格光子晶体平板上设计了一个ψ形的三通道解波分复用器.通过在该光子晶体结构中引入合适的线缺陷和点缺陷,使得在光子禁带中出现了局域缺陷态.利用该缺陷态模式,可以控制波的传播和耦合,从而实现解波分复用的功能.通过用平面波扩展法和时域有限差分法对此解波分复用器进行了能带和传输特性分析,找到了具有合适缺陷态频率的光子晶体结构参量,实现了透过率高达80%的解波分复用功能.     

Investigation of Alien Wavelength Quality in Live Multi-Domain,Multi-Vendor Link Using Advanced Simulation Tool

Abstract

This article presents an advanced optical model for simulation of alien wavelengths in multi-domain and multi-vendor dense wavelength-division multiplexing networks. The model aids optical network planners with a better understanding of the non-linear effects present in dense wavelength-division multiplexing systems and better utilization of alien wavelengths in future applications. The limiting physical effects for alien wavelengths are investigated in relation to power levels, channel spacing, and other factors. The simulation results are verified through experimental setup in live multi-domain dense wavelength-division multiplexing systems between two national research networks: SURFnet in Holland and NORDUnet in Denmark.     

Ultra-High-Capacity Passive Optical Network Systems with Free-Space Optical Communications

Abstract

This article experimentally demonstrates a hybrid fiber–free-space passive optical network that enables high spectral density, aggregated capacity, and total throughput through ultra-dense wavelength-division multiplexing baseband and radio-over-fiber channels. Ultra-dense wavelength-division multiplexing 10-Gb/s Nyquist-shaped 16-ary quadrature amplitude modulation, 10-Gb/s radio-over-fiber orthogonal frequency-division multiplexing, and 8.75-Gb/s baseband orthogonal frequency-division multiplexing signals per user were transmitted through a maximum 40-km passive optical network, which includes a 6-m free-space optics link with acceptable performance.     

Incompatibility of polarization-division multiplexing with wavelength-division multiplexing in soliton-transmission systems

In a recent experiment it was demonstrated that polarization-division multiplexing was incompatible with wavelength-division multiplexing. We discuss a theoretical model that explains this result.     

Fiber Bragg grating-based self-referencing technique for wavelength-multiplexed intensity sensors

An amplitude-phase-conversion self-referencing technique for intensity-modulated photonic sensors that uses two different-wavelength fiber Bragg gratings is presented. With this technique, the system response has been demonstrated to be almost unafffected by network power variations as high as 90% of the total power launched by the source. We prove the multiplexing capability of this type of self-referenced fiber sensor by wavelength-division multiplexing two of them in a star network. A tunable fused biconical wavelength-division multiplexer is used for sensor addressing at the detection block, providing both good isolation and low cross-talk values.     

Ultrafast and Wideband All-Optical Processing Technologies Towards Flexible Photonic Networks

Recent progress in ultrafast and wideband all-optical processing technologies to realize flexible and transparent optical time-division multiplexing (OTDM)/wavelength-division multiplexing (WDM) photonic networks is reviewed covering ultrafast OTDM technologies handling more than 100 Gbit/s per wavelength channel and wideband WDM technologies handling more than 1000 wavelength channels over the 200 nm range.     

Grating-based transmission bandpass filters using dispersion-matched mode conversion

A narrow-bandpass filter with a 15-dB signal-to-noise level is demonstrated using Bragg-grating assisted mode conversion within a tapered waveguide. The potential effects of such filters in wavelength-division multiplexing systems are discussed.     

Novel designs for sampled grating-based multiplexers demultiplexers

Novel multiplexers-demultiplexers for dense wavelength-division multiplexing systems that use interleaved sampled gratings are presented. It is shown that, with the appropriate design, configurations ranging from hybrid to add-drop as well as all-grating-based multiplexers can easily be realized.     

Recent Advances of Multi-Channel Transmission in Metro Access Networks

We discuss the concept of coarse wavelength-division multiplexing (CWDM) for metro networks. After reviewing the requirements on components such as lasers and fiber, we propose different architectures for a flexible upgrade of existing CWDM systems.