Thermal stability and crystallization kinetics of Se–Te–Sn alloys using differential scanning calorimetry

The present article deals with the differential scanning calorimetric (DSC) study of Se?CTe glasses containing Sn. DSC runs are taken at four different heating rates (10, 15, 20 and 25?K?min^?1). The crystallization data are examined in terms of modified Kissinger, Matusita equations, Mahadevan method and Augis and Bennett approximation for the non-isothermal crystallization. The activation energy for crystallization (E _c) is evaluated from the data obtained at different heating rates. Activation energy of glass transition is calculated by Kissinger??s relation and Moynihan theory. The glass forming tendency is also calculated for each composition. The glass transition temperature and peak crystallization temperature increases with the increase in Sn % as well as with the heating rate.     

Crystallization kinetics of tellurium-rich Se–Te–Sn glassy alloys

The objective of this study was to explore an innovative type of form-stable phase-change materials (PCMs) with flexible cellulose acetate (CA) nano-fibrous felts (nano-felts) absorbed with capric–myristic–stearic acid ternary eutectic mixture for thermal energy storage/retrieval. Capric–myristic–stearic acid (CMS) ternary eutectic mixture as model PCM was firstly prepared. The developed CA nano-felts as supporting material was mechanically flexible and was made from CA/polyvinylpyrrolidone (PVP) precursor composite nanofibers followed by removal of PVP components. The effects of original mass ratio of CA/PVP on absorption capacities of CA nano-felts were studied. The modified CA nano-felts with groove/porous structure and rough surfaces were capable of absorbing a large amount of PCMs. The morphological structures, as well as the properties of thermal energy storage, thermal stability and reliability, and thermal insulation of composite PCMs were characterized by scanning electron microscopy, differential scanning calorimetry, and thermal performance measurement, respectively. The results showed that CMS eutectic was absorbed in and/or supported by modified CA nano-felts. The heat enthalpy values of composite PCMs have slightly decreased in comparison with the corresponding theoretical values. The composite PCMs demonstrated good thermal stability and reliability after thermal cycles. The composite PCMs had high thermal insulation capability for temperature regulation.     

Thermal analysis of cadmium addition on the glass transition and crystallization kinetics of Se–Te–Sn glassy network

Journal of Thermal Analysis and Calorimetry - Calorimetric measurements have been performed in quaternary glassy system Se78−xTe20Sn2Cdx (x = 0, 2, 4, and 6) to study the...     

Calorimetric study of Sb-modified Ge–Se–Te glassy alloys

The glassy compositions of Ge ₁₆ Se ₅₂ Te _32?x Sb _x system, obtained using rapid melt quenching technique, have been characterized by calorimetric study at different heating rates in this study. A systematic investigation of the crystallization kinetics is carried out for these compositions. Composition corresponding to atomic % 8 of Sb has good thermal stability. The material exhibits the unique thermal properties, which makes it suitable to use for electrical or memory switching devices. Various thermal parameters, activation energies of glass transition and crystallization are calculated using relevant approaches.     

Extended study of crystallization kinetics for Se–Te glasses

Crystallization kinetics of chosen compositions from Se–Te glassy system were studied under non-isothermal conditions depending on particle size using differential scanning calorimetry. The purpose of this article is to demonstrate the extent of information accessible by the modern kinetic analysis provided by the differential scanning calorimetry, and to suggest its importance and merit for the development of new, high-tech PCM materials. The crystallization kinetics was described in terms of the nucleation-growth Johnson–Mehl–Avrami model. Complexity of the crystallization process was in this case represented by very closely overlapping consecutive competing surface and bulk nucleation-growth mechanisms. Mutual interactions of both mechanisms as well as all other observed effects were explained in terms of thermal gradients, surface crystallization centers arising from the sample preparation treatments, and changing amount of volume nuclei originating from the combination of pre-nucleation period, and the very glass preparation phase. Accent was laid on the merits resulting from interpretations of characteristic kinetic functions. A new criterion for quick determination of the dominating crystallization mechanism—surface or bulk—was introduced.     

Glass transition and crystallization kinetics analysis of Sb–Se–Ge chalcogenide glasses

Differential thermal analysis (DTA) has been employed to investigate the effect of Ge addition on the glass transition behavior and crystallization kinetics of Sb₁₀Se_90?xGe_x (x = 0, 19, 21, 23, 25, 27) alloys. The three characteristic temperatures viz. glass transition (T _g), crystallization (T _c), and melting (T _m) have been determined and found to vary with the heating rates and Ge content. Thermal stability and glass forming tendency have been evaluated in terms of ΔT (= T _c ? T _g) and reduced glass transition temperature. The activation energies for glass transition and crystallization have been used to analyze the nucleation and growth process. The activation energy analysis also determines the suitability of alloys to be used in switching applications. Results have been interpreted in terms of bond energies and structural transformations in the investigated alloys.     

Effect of Ag addition on crystallization kinetics and thermal stability of As–Se chalcogenide glasses

Chalcogenide glasses of (As₅₀Se₅₀)_100?xAg_x (0 ≤ x ≤ 25) were prepared using the melt quenching technique under non-isothermal conditions. Differential scanning calorimetry curves measured at different heating rates (5 ≤ β ≤ 40 K min^?1) are used to characterize the as-quenched samples. The thermal stability was monitored through the calculation of the temperature difference T _c ? T _g, stability parameter S and crystallization rate factor K _p. The glass-forming ability (GFA) was investigated on the basis of Hurby parameter H _r which is a strong indicator of GFA. In addition, the activation energy of glass transition E _t, activation energy of crystallization E _c and Avrami exponent n of the studied compositions were determined. The mechanism of crystallization was found to be a combination of two- and three-dimensional crystal growth.     

Thermal stability and crystallization kinetics in superionic glasses using electrical conductivity–temperature cycles

The present work demonstrates application of electrical conductivity (σ)–temperature (T) cycles to investigate thermal properties viz., crystallization and glass transition kinetics in AgI–Ag₂O–V₂O₅–MoO₃ superionic glasses. The σ–T cycles are carefully performed at various heating rates, viz., 0.5, 1, 3, 5, and 7 K/min. The conductivity in Ag⁺ ion conducting glasses exhibit anomalous deviation from Arrhenius behavior near glass transition temperature (T _g) followed by a drastic fall at crystallization (T _c). The temperature corresponding to maximum rate of crystallization (T _p) is obtained from the derivative of σ–1/T plots. With increasing heating rates, the characteristic temperatures (T _g, T _p) are found to be shifting monotonically toward higher temperatures. Thus, activation energy of structural relaxation E _s, crystallization E _c and other thermal stability parameters have been obtained from σ–T cycles using Kissinger equation and Moynihan formulation. For a comparative study, these kinetics parameters have also been calculated from differential scanning calorimetry plots. The parameters obtained from both the methods are found to be comparable within experimental error.     

Crystallization study of Sn additive Se–Te chalcogenide alloys

Calorimetric study of Se_85−x Te₁₅Sn _x (x = 0, 2, 4 and 6) glassy alloys have been performed using Differential Scanning Calorimetry (DSC) under non-isothermal conditions at four different heating rates (5, 10, 15 and 20 °C/min). The glass transition temperature and peak crystallization temperature are found to increase with increasing heating rate. It is remarkable to note that a second glass transition region is associated with second crystallization peak for Sn additive Se–Te investigated samples. Three approaches have been employed to study the glass transition region. The kinetic analysis for the first crystallization peak has been taken by three different methods. The glass transition activation energy, the activation energy of crystallization, and Avrami exponent (n) are found to be composition dependent. The crystallization ability is found to increase with increasing Sn content. From the experimental data, the temperature difference (T _p − T _g) is found to be maximum for Se₈₃Te₁₅Sn₂ alloy, which indicates that this alloy is thermally more stable in the composition range under investigation.     

The effect of Sb content on glass-forming ability,the thermal stability,and crystallization of Ge–Se chalcogenide glass

The glass formation and devitrification of intermediate alloys in the Sb–Ge–Se system were studied by differential scanning calorimetry. A comparison of various simple quantitative methods to assess the level of stability of the glassy materials in the bove mentioned system is presented. All of these methods are based on characteristic temperatures, such as the glass transition temperature, T _g, the onset temperature of crystallization, T _in , the temperature corresponding to the maximum crystallization rate, T _p, or the melting temperature, T _m . In this case, k _gl may be more suitable for estimating the glass thermal stability in above composition range than ΩT. In this work the parameter K _r (T) is added to the stability criteria. The thermal stability of some ternary compounds of the Sb–Ge–Se type has been evaluated experimentally and correlated with the activation energies of crystallization by this kinetic criterion and compared with those evaluated by other criteria. All the results of criteria and kinetic parameter K _r (T) confirm that the thermal stability decrease with increasing Sb content in the glassy system. The crystallization results are analyzed and both the activation energy of crystallization process and the crystallization mechanism are characterized. Finally, identification of the crystalline phases was made by recording the X-ray diffraction pattern of the transformed material. This pattern shows the existence of microcrystallites of two phases, the first is germanium Selenide GeSe₂ and the second is Sb₂Se₃ in amorphous matrix for annealed of Sb_2.5Ge_22.5Se₇₅ and Sb₁₀Ge₁₅Se₇₅ glass.     

Crystallisation kinetics and structure of modified Zn–Al–Cu alloys

The present paper reports induced glass transition dynamics appeared in porous silica (PSi) and nonporous silica (NPSi) nanoparticles. The size of these spherical particles is 5–15 nm for PSi and 15–20 nm for NPSi. PSi shows two glass transitions (Tg1 and Tg2) on heating, whereas NPSi shows one glass transition (Tg). The NPSi shows Tg at a higher temperature than PSi. PSi shows an exothermic transition on cooling, whereas NPSi shows no transition on cooling. Both Tgs appeared in PSi show dynamic behavior with the existence of positive activation energy. Both Tgs are reversible in PSi, whereas NPSi shows only one and irreversible Tg. The observed glass transitions in PSi and NPSi follow the configuron percolation model and show thermodynamic quasi-equilibrium with percolation threshold (fc) <1. The silica nanoparticles show induced glass transitions because of the presence of weak hydrogen bonds (HB) and a weak van der Waal force present in PSi, whereas the lack of porosity in NPSi shows irreversible Tg with stronger HB. The porosity of PSi makes it more reactive and dynamic due to its capillary behavior and shows its applicability in medical sciences, whereas the stability of NPSi makes it important for industrial research.     

Thermal stability and flammability of butadiene–styrene rubber nanocomposites

Heterobimetallic oxalato complex precursors, manganese(II)tetraaquatris(oxalato)lanthanate(III)hexahydrate (MnOLa), cobalt(II)pentaaquatris(oxalato)lanthanate(III)trihydrate (CoOLa), nickel(II)pentaaquatris(oxalato)lanthanate(III)hexahydrate (NiOLa) and copper(II)diaaquatris(oxalato)lanthanate(III)monohydrate (CuOLa) of the type, M₃[La(C₂O₄)₃(H₂O) _m ]₂·nH₂O have been synthesized in aqueous medium. The precursors were characterized by elemental analysis, IR, electronic spectral and powder X-ray diffraction studies. The good crystalline nature with monoclinic structures predominates in MnOLa and NiOLa whereas triclinic structures were found in CoOLa and CuOLa. The solid-state thermal behaviour of the precursors was explored using TG, DTG and DTA in air. The MnOLa generated a mixture species consisting mainly of MnO₂, Mn₃O₄, Mn₅O₈, La₂O₃ and LaMn₇O₁₂ at 1000 °C through the formation of several intermediate species at 380 and 570 °C. The studies revealed that CoOLa led mainly to LaCoO₃ and La₂CoO₄ along with some oxides of both the cobalt and lanthanum at 1000 °C. In case of nickel analogue the mixture species identified at 1000 °C are mainly of La₂NiO₄, La₂O₃, Ni₂O₃ and NiO_2. In case of CuOLa the product at 1000 °C consisted of La₂CuO₄, La₂Cu₂O₅ and oxides of copper and lanthanum. The nature of decomposition of the precursors in nitrogen were seen from DSC study and the kinetic parameters i.e., E ^* , lnk ₀, ΔH ^# , ΔS ^# and order of reaction of all the steps were evaluated and discussed.     

Thermal stability of metastable nano-composites in planar flow cast Ti–Zr–Ni alloys

The influence of the solidification rate, the thermal stability, and devitrification process of the rapidly solidified Ti₄₅Zr₃₈Ni₁₇ alloy have been examined on ribbons prepared by the planar flow casting method. Differential scanning calorimetry in the continuous heating mode, X-ray diffraction, and electron microscopy techniques were applied. Comparison of the so-obtained microstructures revealed the competition between icosahedral quasi-crystalline and β-Ti(Zr) phases, both dispersed in an amorphous matrix. It has been found that the decomposition process of rapidly quenched ribbons consists of the sequence of several independent exothermic and endothermic reactions involving the additional precipitation of quasi-crystalline nanoparticles and both irreversible and reversible changes between the unstable high-temperature β and stable low-temperature α phases. The formation of the intermetallics as well as the transformation of quasi-crystals into Laves phase has been observed at higher temperatures in all ribbons.     

Electrochemical deposition and corrosion stability of Zn–Co alloys

Electrochemically deposited Zn–Co alloys under various deposition conditions were investigated using anodic linear sweep voltammetry for phase structure determination, scanning electron microscopy for surface morphology analysis, atomic absorption spectroscopy for determination of chemical composition, and polarization measurements and open circuit potential measurements for determination of corrosion properties. The influence of deposition current density, temperature, and composition of deposition solution on the phase structure and corrosion properties of Zn–Co alloys was studied. It was shown that the ratio of cobalt to zinc ions in the plating bath strongly affects the chemical content and phase structure, as well as corrosion stability, of Zn–Co alloys. Zn–Co alloys deposited from plating baths with the lowest and the highest ratios of cobalt and zinc ions exhibited the lowest corrosion rate.     

Thermal analysis of the crystallization kinetics of lead zirconate titanate powders prepared via sol–gel route

Journal of Thermal Analysis and Calorimetry - The transformation temperatures, magnetization behavior, shape memory behavior, and mechanical properties of polycrystalline Ni45Mn40Co5Sb10?xBx...     

Thermal stability of Ti–MCM-41

Ti containing mesoporous MCM-41 materials have been synthesized through two methods: heating and non-heating [room temperature (RT)]. The synthesized materials have been characterized using X-ray diffraction, Fourier transform infrared, nitrogen sorption, and X-ray fluorescence methods and their thermal stabilities evaluated using thermogravimetric methods in inert atmosphere. The thermal stabilities have been analyzed based on the synthesis method, as well as on the amount of titanium in the MCM-41 materials. The thermal stability results suggest that uncalcined MCM-41 materials generally show higher mass loss than their calcined counterparts. Also, the RT-synthesized materials showed lower stability than the high-temperature synthesized samples for the uncalcined samples. It is also been found that MCM-41 materials show improved thermal stabilities as the amount of titanium is increased.