4,5-Bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R3Sn)2(dmit), 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R3Sn)2(dmio), compounds: Crystal structures of (cyclohexyl3Sn)2(dmio), (Ph3Sn)2(dmit) and (Ph3Sn)2(dmio)

The synthesis and crystal structures of 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R₃Sn)₂(dmit), 1, and 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R₃Sn)₂(dmio), 2, compounds are reported. Compounds, (1 or 2: R = Ph or cyclohexyl, Cy), have been obtained from reaction of R₃SnCl with Cs₂dmit or Na₂dmio. The presence of the two tin centres in (2: R = Ph) is shown in the ¹³C NMR spectrum by the couplings of both Sn atoms to the dmio olefinic carbons with J values of 29.4 and 24.7 Hz. The δ¹¹⁹ Sn values for (1: R = Ph) and (2: R = Ph) differ by about 30 ppm, values being −20.7 and −50.1 ppm, respectively, in CDCl₃ solution. X-ray structure determinations for (1: R = Ph) and (2: R = Ph or Cy) reveal the compounds to have 4-coordinate, distorted tetrahedral tin centres. The dithiolato ligands, dmit and dmio, act as bridging ligands, in contrast to their chelating roles in R₂Sn(dmit) and R₂Sn(dmio). A further difference between R₂Sn(dmit) and R₂Sn(dmio), on one hand, and 1 and 2 on the other, is that intermolecular Sn-S and Sn-O interactions are absent in 1 and 2. However, weak intermolecular hydrogen bonding interactions are found in (1: R = Ph) [C-H?π] and in (2: R = Ph) [C-H?π and C-H?O].     

Synthesis and characterization of palladium(II) complexes with chiral aminophosphine ligands: Catalytic behaviour in asymmetric hydrovinylation. Crystal structure of cis-[PdCl2(PPh((R)-NHCHCH3Ph)2)2]

Optically active ligands of type Ph₂PNHR (R = (R)-CHCH₃Ph, (a); (R)-CHCH₃Cy, (b); (R)-CHCH₃Naph, (c)) and PhP(NHR)₂ (R = (R)-CHCH₃Ph, (d); (R)-CHCH₃Cy, (e)) with a stereogenic carbon atom in the R substituent were synthesized. Reaction with [PdCl₂(COD)₂] produced [PdCl₂P₂] (1) (P = PhP(NHCHCH₃Ph)₂), whose molecular structure determined by X-ray diffraction showed cis disposition for the ligands. All nitrogen atoms of amino groups adopted S configuration. The new ligands reacted with allylic dimeric palladium compound [Pd(η³-2-methylallyl)Cl]₂ to gave neutral aminophosphine complexes [Pd(η³-2-methylallyl)ClP] (2a-2e) or cationic aminophosphine complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3a-3e) in the presence of the stoichiometric amount of AgBF₄. Cationic complexes [Pd(η⁴3-2-methylallyl)(NCCH₃)P]BF₄ (4a-4e) were prepared in solution to be used as precursors in the catalytic hydrovinylation of styrene. ³¹P NMR spectroscopy showed the existence of an equilibrium between the expected cationic mixed complexes 4, the symmetrical cationic complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3) and [Pd(η³-2-methylallyl)(NCCH₃)₂]BF₄ (5) coming from the symmetrization reaction. The extension of the process was studied with the aminophosphines (a-e) as well as with nonchiral monodentate phosphines (PCy₃ (f), PBn₃ (g), PPh₃ (h), PMe₂Ph (i)) showing a good match between the extension of the symmetrization and the size of the phosphine ligand. We studied the influence of such equilibria in the hydrovinylation of styrene because the behaviour of catalytic precursors can be modified substantially when prepared ‘in situ’. While compounds 3 and bisacetonitrile complex 5 were not active as catalysts, the [Pd(η³-2-methylallyl)(η²-styrene)₂]⁺ species formed in the absence of acetonitrile showed some activity in the formation of codimers and dimers. Hydrovinylation reaction between styrene and ethylene was tested using catalytic precursors solutions of [Pd(η³-2-methylallyl)LP]BF₄ ionic species (L = CH₃CN or styrene) showing moderate activity and good selectivity. Better activities but lower selectivities were found when L = styrene. Only in the case of the precursor containing Ph₂PNHCHCH₃Ph (a) ligand was some enantiodiscrimination (10%) found.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

The CO and CS bond cleavage in carbon dioxide and tolyl isothiocyanate by reactions with the Mo(0) tetraphosphine complex [Mo{meso-o-C6H4(PPhCH2CH2PPh2)2}(Ph2PCH2CH2PPh2)]

A Mo(0) complex containing a new tetraphosphine ligand [Mo(P₄)(dppe)] (1; P₄ = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂, dppe = Ph₂PCH₂CH₂PPh₂) reacted with CO₂ (1 atm) at 60 °C in benzene to give a Mo(0) carbonyl complex fac-[Mo(CO)(η³-P₄O)(dppe)] (2), where the O abstraction from CO₂ by one terminal P atom in P₄ takes place to give the dangling P(O)Ph₂ moiety together with the coordinated CO. On the other hand, reaction of 1 with TolNCS (Tol = m-MeC₆H₄) in benzene at 60 °C resulted in the incorporation of three TolNCS molecules to the Mo center, forming a Mo(0) isocyanide-isothiocyanate complex trans,mer-[Mo(TolNC)₂(η²-TolNCS)(η³-P₄S)] (4), where the S abstraction occurs from two TolNCS molecules by P₄ and dppe to give the η³-P₄S ligand and free dppeS, respectively, together with two coordinated TolNC molecules. The remaining site of the Mo center is occupied by the third TolNCS ligating at the CS bond in an η²-manner. The X-ray analysis has been undertaken to determine the detailed structures for 2 and 4.     

Reactivity of [CpCr(CO)3]2 towards thione (CS) moieties in some sulfur-containing substrates

The reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with 1 mol equivalent of 2,5-dimercapto-1,3,4-thiadiazole (DMcTH₂) at ambient temperature led to the isolation of a reddish-brown crystalline solid of CpCr(CO)₃(η¹-DMcTH) (5) and a green solid of CpCr(CO)₃H (2) in yields of ca. 28% and 30%, respectively, along with some [CpCr(CO)₂]₂ (3) and [CpCr(CO)₂]₂S (4). The reaction of 1 with 1 mol equivalent of vinylene trithiocarbonate (SCS(CH)₂S) (VTTC) at 90 °C led to the isolation of a red crystalline solid of CpCr(CO)₂(η²-SCHSC₂H₂) (6) in ca. 15% yield while the reaction of 1 with isopropylxanthic disulfide ((CH₃)₂CHOCS₂)₂ resulted in the formation of CpCr(CO)₂(η²-S₂COCH(CH₃)₂) (8) in ca. 80% yield. The complexes 5, 6 and 8 have been determined by single crystal X-ray diffraction analysis.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Study of ferrocenyl-substituted Co2(CO)6-bispropargylic alcohol complexes as substrates for the formation of chains and macrocycles

Treatment of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = H, R² = CMe(O); R¹ = R² = CMe(O)) with LiCCCH₂OLi (prepared in situ from HCCCH₂OH and n-BuLi) affords the ferrocenyl-substituted but-2-yne-1,4-diol compounds of general formula [Fc-1-R¹-1′-{CR(OH)CCCH₂OH}] (R¹ = R = H (1a); R¹ = H, R = Me (1b); R¹ = CMe(O), R = Me (1c)) in low to high yields, respectively (where Fc = Fe(η⁵-C₅H₄)₂). In the case of the reactions of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = R² = CMe(O)), the by-products [Fc-1-R¹-1′-{CR(OH)(CH₂)₃CH₃}] (R¹ = R = H (2a); R¹ = CMe(O), R = Me (2c)) along with minor quantities of [Fc-1,1′-{CMe(OH)(CH₂)₃CH₃}₂] (3) are also isolated; a hydrazide derivative of dehydrated 2c, [1-(CMeCHCH₂CH₂CH₃)-1′-(CMeNNH-2,4-(NO₂)₂C₆H₃)] (2c′), has been crystallographically characterised. Interaction of 1 with Co₂(CO)₈ smoothly generates the alkyne-bridged complexes [Fc-1-R¹-1′-{Co₂(CO)₆-μ-η²-CR(OH)CCCH₂OH}] (R¹ = R = H (4a); R¹ = H, R = Me(4b); R¹ = CMe(O), R = Me (4c)) in good yield. Reaction of 4a with PhSH, in the presence of catalytic quantities of HBF₄ · OEt₂, gives the mono- [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂OH}] (5) and bis-substituted [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂SPh}] (6) straight chain species, while with HS(CH₂)_nSH (n = 2,3) the eight- and nine-membered dithiomacrocylic complexes [Fc-1-H-1′-{cyclo-Co₂(CO)₆-μ-η²-CH(S(CH₂)_n-)CCCH₂S-}] [n = 2 (7a), n = 3 (7b)] are afforded. By contrast, during attempted macrocyclic formation using 4b and HSCH₂CH₂OCH₂CH₂SH dehydration occurs to give [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-C(CH₂)CCCH₂OH}] (8). Single crystal X-ray diffraction studies have been reported on 2c′, 4b, 4c, 7b and 8.     

Functionalized cyclodiphosphazanes cis-[BuNP(OR)]2 (R=C6H4OMe-o, CH2CH2OMe, CH2CH2SMe, CH2CH2NMe2) as neutral 2e, 4e or 8e donor ligands

Cyclodiphosphazanes having donor functionalities such as cis-[^tBuNP(OR)]₂ (R = C₆H₄OMe-o (2); R = CH₂CH₂OMe (3); R = CH₂CH₂SMe (4); R = CH₂CH₂NMe₂ (5)) were obtained in good yield by reacting cis-[^tBuNPCl]₂ (1) with corresponding nucleophiles. The reactions of 2-5 with [RuCl₂(η⁶-cymene)]₂, [MCl(COD)]₂ (M = Rh, Ir), [PdCl₂(PEt₃)]₂ and [MCl₂(COD)] (M=Pd, Pt) result in the formation of exclusively monocoordinated mononuclear complexes of the type cis-[{^tBuNP(OR)}₂ML_n-κP] irrespective of the reaction stoichiometry and the reaction conditions. In contrast, 2-5 react with [RhCl(CO)₂]₂, [PdCl(η³-C₃H₅)]₂, CuX (X=Cl, Br, I) to give homobinuclear complexes. Interestingly, CuX produces both mono and binuclear complexes depending on the stoichiometry of the reactants and the reaction conditions. The mononuclear complexes on treatment with appropriate metal reagents furnish heterometallic complexes.     

Synthetic, X-ray structural and protonation studies of CpCr(CO)2SPy and CpCr(CO)2SPym (SPy = C5H4NS, SPym = C4H3N2S)

The facile reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with one mole equivalent of 2,2′-dithiodipyridine ((C₅H₄NS)₂(SPy)₂) at ambient temperature led to the isolation of dark brown crystalline solids of CpCr(CO)₂(η²-SPy) (2) in ca. 72% yield. 2 undergoes quantitative conversion to CpCrCl₂(η¹-SPyH) (3) with HCl. The reaction 1 with one mole equivalent of 2-mercaptopyrimidine (C₄H₃N₂SHHSPym) at ambient temperature led to the isolation of reddish-brown crystalline solids of CpCr(CO)₂(η²-SPym) (4) and green solids of CpCr(CO)₃H (5) in yields of ca. 42% and 46%, respectively. Reaction of 4 with HCl and subsequent workup in acetonitrile resulted in the cleavage of the thiolate ligand, giving the 15-electron chromium(III) species CpCrCl₂(CH₃CN) (6) and free 2-mercaptopyrimidine. The complexes 2-4 have been determined by single X-ray diffraction analysis.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of tungsten (R′O)2(ArN)WCH-SiR2-CHW(NAr)(OR′)2 (R = Me, Ph) and (R′O)2(ArN)WCH-SiMe2SiMe2-CHW(NAr)(OR′)2

Bimetallic alkylidene complexes of tungsten (R′O)₂(ArN)WCH-SiR₂-CHW(NAr)(OR′)₂ (R = Me (1), Ph (2)) and (R′O)₂(ArN)WCH-SiMe₂SiMe₂-CHW(NAr)(OR′)₂ (3) (Ar = ; R′ = CMe₂CF₃) have been prepared by the reactions of divinyl silicon reagents R₂Si(CHCH₂)₂ with known alkylidene compounds R′′-CHMo(NAr)(OR′)₂. (R′′ = Bu^t, PhMe₂C) Complexes 1-3 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1-3 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and 3 and predominant cis-units content in the case of 2.     

Activation of 1,3,5-trimethyl-1,3,5-triazacyclohexane by Os3(CO)12 to form amidino [(MeN)2CH] cluster complexes

Reaction of 1,3,5-trimethyl-1,3,5-triazacyclohexane [(MeNCH₂)₃] with Os₃(CO)₁₂ in refluxing toluene results in C-H and C-N bond activation of the (MeNCH₂)₃ ligand to afford three amidino cluster complexes (μ-H)Os₃(CO)₁₀[μ,η²-CH(NMe)₂] (1), (μ-H)Os₃(CO)₉[μ₃,η²-CH(NMe)₂] (2), and Os₂(CO)₆[μ,η²-CH(NMe)₂]₂ (3). The controlled experiments show that thermolysis of 1 yields 2, and heating 2 in the presence of (MeNCH₂)₃ ligand produces 3. The molecular structures of 1 and 3 have been determined by an X-ray diffraction study.     

Pentabenzylcyclopentadienyl molybdenum and tungsten hydrides: Syntheses, structures and electrochemistry of [MHCp(CO)2(L)] (L = CO, PMe3, PPh3)

Complexes [MHCp^Bz(CO)₂(PR₃)] (R = CH₃, M = Mo (1); M = W (2); R = Ph, M = Mo (3); Cp^Bz = C₅(CH₂Ph)₅) were prepared by thermal decarbonylation of the corresponding [MHCp^Bz(CO)₃] in the presence of trimethyl- or triphenyl-phosphine. In solution the NMR spectra of all compounds show the presence of cis and trans isomers that interconvert at room temperature. In the solid state the molecular structures obtained for compounds 1 and 2 correspond to the trans isomers, while for 3 the cis isomer is present.The electrochemistry of [MoHCp^Bz(CO)₂(PMe₃)] (1), [MoHCp^Bz(CO)₃] (5), [WHCp^Bz(CO)₃] (6), [WCp^Bz(CO)₃]₂ (7), and [MCp^Bz(CO)₃(CH₃CN)]BF₄ (8), is described. The cleavage of M-H bonds takes place upon oxidation or reduction. Cations [MCp^Bz(CO)₂L(CH₃CN)]⁺ form in solvent-assisted M-H bond breaking upon oxidation of [MHCp^Bz(CO)₂L] (L = PMe₃, CO). Reduction of [MHCp^Bz(CO)₃] gives [MCp^Bz(CO)₃]⁻ and H₂. The presence of one PMe₃ ligand lowers the reduction potential and precludes the observation of reduction waves.     

Electrochemical, EPR and computational results on [Fe2Cp2(CO)2]-based complexes with a bridging hydrocarbyl ligand

The dimetallacyclopentenone complexes [Fe₂Cp₂(CO)(μ−CO){μ−η¹:η³−C_αHC_β(R)C(O)}] (R = CH₂OH, 1a; R = CMe₂OH, 1b; R = Ph, 1c) were prepared by photolytic reaction of [Fe₂Cp₂(CO)₄] with alkyne according to the literature procedure. The X-ray and the electrochemical characterization of 1c are presented. The μ-allenyl compound [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β−C_αHC_βCMe₂][BF₄] ([2][BF₄]), obtained by reaction of 1b with HBF₄, underwent monoelectron reduction to give a radical species which was detected by EPR at room temperature. The EPR signal has been assigned to [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β-C_αHC_βCMe₂}], [2]^•. The molecular structures of [2]⁺ and [2]^• were optimized by DFT calculations. The unpaired electron in [2]^• is localized mainly at the metal centers and, coherently, [2]^• does not undergo carbon-carbon dimerization, by contrast with what previously observed for the μ-vinyl radical complex [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²-CHCH(Ph)}]^•, [3]^•. Electron spin density distributions similar to the one of [2]^• were found for the μ-allenyl radical complexes [Fe₂Cp₂(CO)₂(μ-CO){μ-η¹:η²_α,β-C_αHC_βC(R¹)(R²)}]^• (R¹ = R² = H, [4]^•; R¹ = H, R² = Ph, [5]^•; R¹ = R² = Ph, [6]^•).     

Complexation and metallation of Ph2PCC(CH2)5CCPh2 in triosmium carbonyl clusters

Reaction of Ph₂PCC(CH₂)₅CCPh₂ with Os₃(CO)₁₀(NCMe)₂ affords Os₃(CO)₁₀(μ,η²-(Ph₂P)₂C₉H₁₀) (1) and the double cluster [Os₃(CO)₁₀]₂(μ,η²- (Ph₂P)₂C₉H₁₀)₂ (2), through coordination of the phosphine groups. Thermolysis of 1 in toluene generates Os₃(CO)₇(μ-PPh₂)(μ₃,η⁵-Ph₂PC₉H₁₀) (3) and Os₃(CO)₈(μ-PPh₂)(μ₃,η⁶-Ph₂P(C₉H₁₀)CO) (4). The molecular structures of 1, 3, and 4 have been determined by an X-ray diffraction study. Both 3 and 4 contain a bridging phosphido group and a carbocycle connected to an osmacyclopentadienyl ring, which are apparently derived from C-P bond activation and C-C bond rearrangement of the dpndy ligand governed by the triosmium clusters.     

Synthesis, characterization, protonation studies and X-ray crystal structure of ReH5(PPh3)2(PTA) (PTA = 1,3,5-triaza-7-phosphaadamantane)

The novel rhenium pentahydride complex [ReH₅(PPh₃)₂(PTA)] (2) was synthesized by dihydrogen replacement from the reaction of [ReH₇(PPh₃)₂] with PTA in refluxing THF. Variable temperature NMR studies indicate that 2 is a classic polyhydride (T_1(min) = 133 ms). This result agrees with the structure of 2, determined by X-ray crystallography at low temperature. The compound shows high conformational rigidity which allows for the investigation of the various hydride-exchanging processes by NMR methods. Reactions of 2 with equimolecular amounts of either HFIP or HBF₄ · Et₂O at 183 K afford [ReH₅(PPh₃)₂{PTA(H)}]⁺ (3) via protonation of one of the nitrogen atoms on the PTA ligand. When 5 equivalents of HBF₄ · Et₂O are used, additional protonation of one hydride ligand takes place to generate the thermally unstable dication [ReH₄(η²-H₂)(PPh₃)₂{PTA(H)}]²⁺ (4), as confirmed by ¹H NMR and T₁ analysis. IR monitoring of the reaction between 2 and CF₃COOD at low temperature shows the formation of the hydrogen bonded complex [ReH₅(PPh₃)₂{PTA?DOC(O)CF₃}] (5) and of the ionic pair [ReH₅(PPh₃)₂{PTA(D)?OC(O)CF₃}] (6) preceding the proton transfer step leading to 3.     

Reactions of the metallocene dichlorides [M(Cp)2Cl2] (M = Zr, Hf) and [Ti(MeCp)2Cl2] with the pyridine-2,6-dicarboxylate(−2) ligand: Synthesis, spectroscopic characterization and X-ray structures of the products

The reactivity pattern of the 16-electron species [M(Cp)₂Cl₂] (M = Zr, Hf; Cp⁻ = η⁵-C₅H₅⁻) and [Ti(MeCp)₂Cl₂] (MeCp⁻ = η⁵-C₅H₄CH₃⁻) towards the dipicolinate(−2) (dipic²⁻) ligand under mild (ambient temperature) and convenient (aerobic reactions, aqueous media) conditions have been investigated. The syntheses, molecular structures and spectroscopic (IR, ¹H NMR) characterization are reported for the 18-electron products [Zr(Cp)₂(dipic)] (1), [Hf(Cp)₂(dipic)] (2) and [Ti(MeCp)₂(dipic)] (3). The dipic²⁻ ion behaves as N,O,O′-chelating ligand in the three complexes, while the centroids of the Cp⁻ (1, 2) and MeCp⁻ (3) rings formally occupy the fourth and fifth coordination sites about the central metal. The two identical/very similar bite angles of only ∼70° make the dipic²⁻ ligand particularly suited to form stable metallocene derivatives with 5-coordinate geometry. IR and ¹H NMR data are discussed in terms of the known structures and the tridentate chelating mode of the dipic²⁻ ligand.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.