Functionalized cyclodiphosphazanes cis-[BuNP(OR)]2 (R=C6H4OMe-o, CH2CH2OMe, CH2CH2SMe, CH2CH2NMe2) as neutral 2e, 4e or 8e donor ligands

Cyclodiphosphazanes having donor functionalities such as cis-[^tBuNP(OR)]₂ (R = C₆H₄OMe-o (2); R = CH₂CH₂OMe (3); R = CH₂CH₂SMe (4); R = CH₂CH₂NMe₂ (5)) were obtained in good yield by reacting cis-[^tBuNPCl]₂ (1) with corresponding nucleophiles. The reactions of 2-5 with [RuCl₂(η⁶-cymene)]₂, [MCl(COD)]₂ (M = Rh, Ir), [PdCl₂(PEt₃)]₂ and [MCl₂(COD)] (M=Pd, Pt) result in the formation of exclusively monocoordinated mononuclear complexes of the type cis-[{^tBuNP(OR)}₂ML_n-κP] irrespective of the reaction stoichiometry and the reaction conditions. In contrast, 2-5 react with [RhCl(CO)₂]₂, [PdCl(η³-C₃H₅)]₂, CuX (X=Cl, Br, I) to give homobinuclear complexes. Interestingly, CuX produces both mono and binuclear complexes depending on the stoichiometry of the reactants and the reaction conditions. The mononuclear complexes on treatment with appropriate metal reagents furnish heterometallic complexes.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

One-electron redox reactions involving chromium(0) and molybdenum(0) bis-1,3,5-trimethylbenzene derivatives

The reaction of M(η⁶-1,3,5-Me₃C₆H₃)₂, M = Cr, Mo, with the tetrahalides of Groups 4 and 5 elements proceeds with the monoelectronic oxidation of the metal bis-arene to the [M(η⁶-Me₃C₆H₃)₂]⁺ cation. In the case of MX₄, M = Ti, X = Cl, Br, M = V, X = Cl, and of Nb₂Cl₁₀ the reduction products are the titanium(III), vanadium(III) halides and the niobium(IV) chloride, isolated as the solvate anions [MCl₄(THF)₂]⁻ and [NbCl₄(CH₃CN)]⁻. The reaction of the tetrachloro complexes MCl₄(THF)₂, M = Zr, Hf, with Cr(η⁶-1,3,5-Me₃C₆H₃)₂ in THF produces the ionic [Cr(η⁶-1,3,5-Me₃C₆H₃)₂][MCl₅(THF)], which has been characterized by single-crystal X-ray diffraction in the case of hafnium.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.     

The mer-[RuCl3(dppb)(H2O)] complex: A versatile tool for synthesis of Ru compounds

The complex mer-[RuCl₃(dppb)(H₂O)] [dppb = 1,4-bis(diphenylphosphino)butane] was used as a precursor in the synthesis of the complexes tc-[RuCl₂(CO)₂(dppb)], ct-[RuCl₂(CO)₂(dppb)], cis-[RuCl₂(dppb)(Cl-bipy)], [RuCl(2Ac4mT)(dppb)] (2Ac4mT = N(4)-meta-tolyl-2-acetylpyridine thiosemicarbazone ion) and trans-[RuCl₂(dppb)(mang)] (mang = mangiferin or 1,3,6,7-tetrahydroxyxanthone-C2-β-D-glucoside) complexes. For the synthesis of Ru^II complexes, the Ru^III atom in mer-[RuCl₃(dppb)(H₂O)] may be reduced by H₂(g), forming the intermediate [Ru₂Cl₄(dppb)₂], or by a ligand (such as H2Ac4mT or mangiferin). The X-ray structures of the cis-[RuCl₂(dppb)(Cl-bipy)], tc-[RuCl₂(CO)₂(dppb)] and [RuCl(2Ac4mT)(dppb)] complexes were determined.     

Pentabenzylcyclopentadienyl molybdenum and tungsten hydrides: Syntheses, structures and electrochemistry of [MHCp(CO)2(L)] (L = CO, PMe3, PPh3)

Complexes [MHCp^Bz(CO)₂(PR₃)] (R = CH₃, M = Mo (1); M = W (2); R = Ph, M = Mo (3); Cp^Bz = C₅(CH₂Ph)₅) were prepared by thermal decarbonylation of the corresponding [MHCp^Bz(CO)₃] in the presence of trimethyl- or triphenyl-phosphine. In solution the NMR spectra of all compounds show the presence of cis and trans isomers that interconvert at room temperature. In the solid state the molecular structures obtained for compounds 1 and 2 correspond to the trans isomers, while for 3 the cis isomer is present.The electrochemistry of [MoHCp^Bz(CO)₂(PMe₃)] (1), [MoHCp^Bz(CO)₃] (5), [WHCp^Bz(CO)₃] (6), [WCp^Bz(CO)₃]₂ (7), and [MCp^Bz(CO)₃(CH₃CN)]BF₄ (8), is described. The cleavage of M-H bonds takes place upon oxidation or reduction. Cations [MCp^Bz(CO)₂L(CH₃CN)]⁺ form in solvent-assisted M-H bond breaking upon oxidation of [MHCp^Bz(CO)₂L] (L = PMe₃, CO). Reduction of [MHCp^Bz(CO)₃] gives [MCp^Bz(CO)₃]⁻ and H₂. The presence of one PMe₃ ligand lowers the reduction potential and precludes the observation of reduction waves.     

Bimetallic single-source precursors [M(NH3)4][Co(C2O4)2(H2O)2]·2H2O (M = Pd, Pt) for the one run synthesis of CoPd and CoPt magnetic nanoalloys

All the steps of the proposed technique, from the synthesis of single-source precursors to the preparation of CoPd and CoPt nanoalloys, are described. The double complex salts (DCS) [M(NH₃)₄][Co(C₂O₄)₂(H₂O)₂]·2H₂O (M = Pd, Pt), which were synthesized by mixing solutions containing [M(NH₃)₄]²⁺ cations and [Co(C₂O₄)₂(H₂O)₂]²⁻ anions, have been used as precursors. The salts obtained were characterized by IR spectroscopy, thermal analysis, XRD and single crystal X-ray diffraction. The prepared compounds crystallize in the monoclinic (space group I2/m, M = Pd) and orthorhombic (space group I222, M = Pt) crystal systems. Thermal decomposition of the salts in helium or hydrogen atmosphere at 200-600 °C results in the formation of nanoalloys powders (random solid solution Co_0.50Pd_0.50 and chemically ordered CoPt). The size of the bimetallic particles varied from 5 to 20 nm. Order-disorder structural transformations in Co_0.50Pt_0.50 nanoalloys were studied. The magnetic properties of both chemically disordered Co_0.50Pd_0.50 and ordered CoPt clusters have also been measured.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Reactions of the metallocene dichlorides [M(Cp)2Cl2] (M = Zr, Hf) and [Ti(MeCp)2Cl2] with the pyridine-2,6-dicarboxylate(−2) ligand: Synthesis, spectroscopic characterization and X-ray structures of the products

The reactivity pattern of the 16-electron species [M(Cp)₂Cl₂] (M = Zr, Hf; Cp⁻ = η⁵-C₅H₅⁻) and [Ti(MeCp)₂Cl₂] (MeCp⁻ = η⁵-C₅H₄CH₃⁻) towards the dipicolinate(−2) (dipic²⁻) ligand under mild (ambient temperature) and convenient (aerobic reactions, aqueous media) conditions have been investigated. The syntheses, molecular structures and spectroscopic (IR, ¹H NMR) characterization are reported for the 18-electron products [Zr(Cp)₂(dipic)] (1), [Hf(Cp)₂(dipic)] (2) and [Ti(MeCp)₂(dipic)] (3). The dipic²⁻ ion behaves as N,O,O′-chelating ligand in the three complexes, while the centroids of the Cp⁻ (1, 2) and MeCp⁻ (3) rings formally occupy the fourth and fifth coordination sites about the central metal. The two identical/very similar bite angles of only ∼70° make the dipic²⁻ ligand particularly suited to form stable metallocene derivatives with 5-coordinate geometry. IR and ¹H NMR data are discussed in terms of the known structures and the tridentate chelating mode of the dipic²⁻ ligand.     

Synthesis, characterization and comparison of group 14 pyrrolides and indolides Ph3MX (M = Si, Ge, Sn; X = C4H4N, C8H6N)

The biologically important heterocycles pyrrole, C₄H₄N, and indole, C₈H₆N, ought to be useful as reagents in organic synthesis. Unfortunately, working with them has proved to be difficult because they tend to self-polymerize in solution, especially in the presence of acid catalysts. When the self-polymerization can be controlled, however, the pyrrole and indole units should provide an important route to selective N-metal binding, particularly when these ligands are activated by alkyl-lithium reagents. Using this approach, a general synthesis of the group 14 pyrrolides and indolides, Ph₃MX (M = Si, Ge, Sn; X = C₄H₄N, C₈H₆N), has been developed and the results are reported here. The compounds are formed as high-melting, white crystalline solids and have been characterized by ¹³C-, ²⁹Si- and ¹¹⁹Sn-NMR, Raman and electron-impact mass spectroscopy as well as elemental analysis. A single-crystal X-ray study of Ph₃Si(C₄H₄N) has shown that the compound is disordered in the tetragonal lattice, even at low temperature (100 K).     

Alkaline earth metal poly(hydrogen fluorides) hexafluoroarsenates(V) and hexafluorophosphate(V): M2(H2F3)(HF2)2(AF6) (M = Ca, A = As; M = Sr, A = As, P)

New compounds of the type M₂(H₂F₃)(HF₂)₂(AF₆) with M = Ca, A = As and M = Sr, A = As, P) were isolated. Ca₂(H₂F₃)(HF₂)₂(AsF₆) was prepared from Ca(AsF₆)₂ with repeated additions of neutral anhydrous hydrogen fluoride (aHF). It crystallizes in a space group P4₃22 with a = 714.67(10) pm, c = 1754.8(3) pm, V = 0.8963(2) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(AsF₆) was prepared at room temperature by dissolving SrF₂ in aHF acidified with AsF₅ in mole ratio SrF₂:AsF₅ = 2:1. It crystallizes in a space group P4₃22 with a = 746.00(12) pm, c = 1805.1(5) pm, V = 1.0046(4) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(PF₆) was prepared from Sr(XeF₂)_n(PF₆)₂ in neutral aHF. It crystallizes in a space group P4₁22 with a = 737.0(3) pm, c = 1793.7(14) pm, V = 0.9744(9) nm³ and Z = 4. The compounds M₂(H₂F₃)(HF₂)₂(AF₆) gradually lose HF at room temperature in a dynamic vacuum or during being powdered for recording IR spectra or X-ray powder ray diffraction patterns. All compounds are isotypical with coordination of nine fluorine atoms around a metal center forming a distorted Archimedian antiprism with one face capped. This is the first example of the compounds in which H₂F₃⁻ and HF₂⁻ anions simultaneously bridge metal centers forming close packed three-dimensional network of polymeric compounds with low solubility in aHF. The HF₂⁻ anions are asymmetric with usual F?F distances of 227.3-228.5 pm. Vibrational frequency (ν₁) of HF₂⁻ is close to that in NaHF₂. The anion H₂F₃⁻ exhibits unusually small F?F?F angle of 95.1°-97.6° most probably as a consequence of close packed structure.     

Density functional theory study on structural isomers and bonding of model complexes M(CO)5(BH3 · PH3) (M = Cr, Mo, W) and W(CO)5(BH3 · AH3) (A = N, P, As, Sb)

The influence of group 15 various substituents and effect of metal centers on metal-borane interactions and structural isomers of transition metal-borane complexes W(CO)₅(BH₃ · AH₃) and M(CO)₅(BH₃ · PH₃) (A = N, P, As, and Sb; M = Cr, Mo, and W), were investigated by pure density functional theory at BP86 level. The following results were observed: (a) the ground state is monodentate, η¹, with C₁ point group; (b) in all complexes, the η¹ isomer with C_S symmetry on potential energy surface is the transition state for oscillating borane; (c) the η² isomer is the transition state for the hydrogens interchange mechanism; (d) in W(CO)₅(BH₃ · AH₃), the degree of pyramidalization at boron, interaction energy as well as charge transfer between metal and boron moieties, energy barrier for interchanging hydrogens, and diffuseness of A increase along the series A = Sb < As < P < N; (e) in M(CO)₅(BH₃ · PH₃), interaction energy is ordered as M = W > Cr > Mo, while energy barrier for interchanging hydrogens decreases in the order of M = Cr > W > Mo.     

Reactions of 1,2-catechol with Bu3M (M = Ga, In). Structures of intermediate products

Reactions of 1,2-catechol with ^tBu₃M (M = Ga, In) have been studied. Trinuclear compounds [^tBu₅M₃(OC₆H₄O)₂] [M = Ga (1), M = In (2)] were synthesised in the reaction of 2 equiv. of C₆H₄(OH)₂ with 3 equiv. of ^tBu₃M in refluxing solvents. At room temperature the reaction of 1,2-catechol with ^tBu₃In in Et₂O leads to the formation of a binuclear complex [^tBu₄In₂(OC₆H₄OH)₂ · 2Et₂O] (3) possessing a four-membered In₂O₂ core and two unreacted hydroxyl groups. The same reaction carried out in a non-coordinating solvent (CH₂Cl₂) results in formation a compound [^tBu₃In₂(OC₆H₄O)(OC₆H₄OH)] (4), which undergoes a reaction with ^tBu₃In to yield the product 2. Moreover two intermediate isomeric products 5 and 6 of formula [^tBu₃Ga₂(OC₆H₄O)(OC₆H₄OH)] were isolated from the post-reaction mixture of 1,2-catechol with ^tBu₃Ga. The compound 6 possessing a different coordination of gallium atoms than 5 is a result of the intramolecular rearrangement of the compound 5 to decrease the steric repultion between ligands. Compounds 3 and 6 were structurally characterised. According to the structure of intermediate products 3-6 a reaction pathway of 1,2-catechols with group 13 metal trialkyls was proposed.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Structural and spectroscopic trends in mononuclear arylchalcogenolato-palladium(II) and -platinum(II) complexes: Crystal structures of [M(TeAr)2(dppe)] {M = palladium, platinum; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane}

A series of mononuclear [M(EAr)₂(dppe)] [M = Pd, Pt; E = Se, Te; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane] complexes has been prepared in good yields by the reactions of [MCl₂(dppe)] and corresponding ArE⁻ with a special emphasis on the aryltellurolato palladium and -platinum complexes for which the existing structural information is virtually non-existent. The complexes have crystallized in five isomorphic groups: (1) [Pd(SePh)₂(dppe)] and [Pt(SePh)₂(dppe)], (2) [Pd(TePh)₂(dppe)] and [Pt(TePh)₂(dppe)], (3) [Pd(SeTh)₂(dppe)], (4) [Pt(SeTh)₂(dppe)] and [Pd(TeTh)₂(dppe)], and (5) [Pt(TePh)₂(dppe)]. In addition, solvated [Pd(TePh)₂(dppe)] · CH₃OH and [Pd(TeTh)₂(dppe)] · 1/2CH₂Cl₂ could be isolated and structurally characterized. The metal atom in each complex exhibits an approximate square-planar coordination. The Pd-Se, Pt-Se, Pd-Te, and Pt-Te bonds span a range of 2.4350(7)-2.4828(7) Å, 2.442(1)-2.511(1) Å, 2.5871(7)-2.6704(8) Å, and 2.6053(6)-2.6594(9) Å, respectively, and the respective Pd-P and Pt-P bond distances are 2.265(2)-2.295(2) Å and 2.247(2)-2.270(2) Å. The orientation of the arylchalcogenolato ligands with respect to the M(E₂)(P₂) plane has been found to depend on the E-M-E bond angle. The NMR spectroscopic information indicates the formation of only cis-[M(EAr)₂(dppe)] complexes in solution. The trends in the ³¹P, ⁷⁷Se, ¹²⁵Te, and ¹⁹⁵Pt chemical shifts expectedly depend on the nature of metal, chalcogen, and aryl group. Each trend can be considered independently of other factors. The ⁷⁷Se or ¹²⁵Te resonances appear as second-order multiplets in case of palladium and platinum complexes, respectively. Spectral simulation has yielded all relevant coupling constants.     

Chiral “P-N-P” ligands, (C20H12O2)PN(R)PY2 [R = CHMe2, Y = C6H5, OC6H5, OC6H4-4-Me, OC6H4-4-OMe or OC6H4-4-Bu] and their allyl palladium complexes

Chiral “P-N-P” ligands, (C₂₀H₁₂O₂)PN(R)PY₂ [R = CHMe₂, Y = C₆H₅ (1), OC₆H₅ (2), OC₆H₄-4-Me (3), OC₆H₄-4-OMe (4) or OC₆H₄-4-^tBu (5)] bearing the axially chiral 1,1′-binaphthyl-2,2′-dioxy moiety have been synthesised. Palladium allyl chemistry of two of these chiral ligands (1 and 2) has been investigated. The structures of isomeric η³-allyl palladium complexes, (R′ = Me or Ph; Y = C₆H₅ or OC₆H₅) have been elucidated by high field two-dimensional NMR spectroscopy. The solid state structure of [Pd(η³-1,3-Ph₂-C₃H₃){κ²-(racemic)-(C₂₀H₁₂O₂)PN(CHMe₂)PPh₂}](PF₆) has been determined by X-ray crystallography. Preliminary investigations show that the diphosphazanes, 1 and 2 function as efficient auxiliary ligands for catalytic allylic alkylation but give rise to only moderate levels of enantiomeric excess.     

Co(III) complexes of the type [(L)Co(O2CO)] (L = tripodal tetraamine ligand): Synthesis,structure, DFT calculations and Co NMR

The syntheses and characterisation of the Co(III) complexes [(L)Co(O₂CO)]ClO₄ (L = a tripodal tetraamine ligand = baep, abap, uns-penp, dppa, trpn) are reported. Geometric isomers are possible for all but the trpn complex, owing to the non-equivalence of the three arms on the tripodal ligand, and both NMR and X-ray crystallography are used to identify the single isomer formed. X-ray crystal structures of the complexes [(L)Co(O₂CO)]ClO₄ · xH₂O (L = baep, x = 0.5; L = abap, x = 0; L = uns-penp, x = 1; L = dppa, x = 0; L = trpn, x = 1) are reported; little variation is observed in the geometry of the carbonate chelate ring while significant lengthening of bonds and expansion of angles involving the cobalt ion occurs as the number of six-membered chelate rings in the complex cations increases. ⁵⁹Co NMR chemical shift data for the complexes show the expected linear relationship between λ_max, the wavelength of the lowest energy d–d transition, and γ, the magnetogyric ratio of the ⁵⁹Co nucleus. An excellent correlation between Δ, the d orbital splitting parameter, and δ(⁵⁹Co) also exists for these complexes. Rate data for the acid hydrolysis of [(L)Co(O₂CO)]⁺ (L = uns-penp, dppa) in 1.0 M HClO₄ differ by two orders of magnitude, and this is attributed to the differing steric accessibility of the endo O atoms in each complex. DFT calculations on the complexes reproduce the isomeric preferences, UV–Vis and ⁵⁹Co NMR spectroscopic data well, provided that solvent effects are included.     

Trimetallic FePd2 and FePt2 4-ferrocenyl-NCN pincer complexes

Ferrocene-bridged NCN pincer complexes of structural type Fe(η⁵-C₅H₄-4-NCN-1-MX)₂ (X = I: 6, M = Pd; 7, M = Pt; X = Cl: 8, M = Pt; NCN = [4-C₆H₂(CH₂NMe₂)₂-2,6]⁻) are accessible by the subsequent reaction of Fe(η⁵-C₅H₄-4-NCNH)₂ (4) with ⁿBuLi and [PtCl₂(SEt₂)₂] (synthesis of 8) or treatment of Fe(η⁵-C₅H₄-4-NCN-1-I)₂ (5) with [Pd₂(dba)₃] (synthesis of 6) or [Pt(tol)₂(SEt₂)]₂ (synthesis of 7) (dba = dibenzylidene acetone, tol = 4-tolyl). In addition, the Sonogashira cross-coupling of Fe(η⁵-C₅H₄I)₂ (1) with HCC-4-NCNH (2) gives Fe(η⁵-C₅H₄-CC-4-NCNH)₂ (3). The reaction behavior of 3 towards ^tBuLi is reported as well.Cyclovoltammetric studies show that the ferrocene entity can be oxidized reversibly. The Fe(II)/Fe(III) potential decreases with increasing electron density at the NCN pincer units due to the presence of the M-halide moiety (M = Pd, Pt).The solid state structure of Fe(η⁵-C₅H₄-4-NCN-1-PdI)₂ (6) is presented. In 6 the Fe(η⁵-C₅H₄)₂ unit connects two NCN-PdI pincer entities with palladium in a square-planar environment. The cyclopentadienyl ligands show a staggered conformation. The C₆H₂ rings are tilted by 23.5(3)° towards the C₅H₄ entities and the C₆H₂ plane is almost coplanar with the coordination plane (10.3(3)°).     

1-Methyl-4-ferrocenylmethyl-3,5-diphenylpyrazole: A versatile ligand for palladium(II) and platinum(II)

The syntheses and characterization of two novel ferrocene derivatives containing 3,5-diphenylpyrazole units of general formula [1-R-3,5-Ph₂-(C₃N₂)-CH₂-Fc] {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄) and R = H (2) or Me (3)} together with a study of their reactivity with palladium(II) and platinum(II) salts or complexes under different experimental conditions is described. These studies have allowed us to isolate and characterize trans-[Pd{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}₂Cl₂] (4a) and three different types of heterodimetallic complexes: cis-[M{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] {M = Pd (5a) or Pt (5b)}, the cyclometallated products [M{κ²-C,N-[3-(C₆H₄)-1-Me-5-Ph-(C₃N₂)]-CH₂-Fc}Cl(L)] with L = PPh₃ and M = Pd (6a) or Pt (6b) or L = dmso and M = Pt (8b) and the trans-isomer of [Pt{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] (7b). In compounds 4a, 5a, 5b and 7b, the ligand behaves as a neutral N-donor group; while in 6a, 6b and 8b it acts as a bidentate [C(sp²,phenyl),N(pyrazole)]⁻ group. A comparative study of the spectroscopic properties of the compounds, based on NMR, IR and UV-Visible experiments, is also reported.