Synthesis and characterization of phosphorous-bridged bisphenoxy titanium complexes and their application to ethylene polymerization

Phosphorous-bridged bisphenoxy titanium complexes were synthesized and their ethylene polymerization behavior was investigated. Bis[3-tert-butyl-5-methyl-2-phenoxy](phenyl)phosphine tetrahydrofuran titanium dichloride (4a) was obtained by treatment of 3 equiv of n-BuLi with bis[3-tert-butyl-2-hydroxy-5-methylphenyl](phenyl)phosphine hydrochloride salt (3a) followed by TiCl₄(THF)₂ in THF. THF-free complexes 5a-5d were synthesized more conveniently by the direct reaction of MOM-protected ligands (2a-2d) with TiCl₄ in toluene. X-ray analysis of 4a revealed that the ligand is bonded to the octahedral titanium (IV) center in a facial fashion and two chlorine atoms possess cis-geometry. Complexes 4a and 5a-5d were utilized as catalyst precursors for ethylene polymerization. Complex 5c gave high molecular weight polyethylene (M_w = 1,170,000, M_w/M_n = 2.0) upon activation with Al(ⁱBu)₃/[Ph₃C][B(C₆F₅)₄] (TB). Ethylene polymerization activity of 5d activated with Al(ⁱBu)₃/TB reached 49.0 × 10⁶ g mol (cat) ⁻¹ h⁻¹.     

Synthesis and characterization of titanium complexes bearing sulfoxide groups and their catalytic behaviors in ethylene homo- and copolymerization

<正>1 Experimental section 1.1 General information All manipulations of air- and/or moisture-sensitive compounds were performed under nitrogen atmosphere using standard Schlenk techniques. 1H NMR and 13 C NMR spectra were recorded on a Varian XL-300 MHz spectrometer with TMS as the internal standard. Mass spectra were obtained using a HP5959 A spectrometer. IR spectra were recorded using a Nicolet AV-360 spectrometer. Elemental analysis was performed by the Analytical Laboratory of Shanghai Institute of Organic Chemistry(CAS). Mn, Mw, and Mw/Mn values of polymers were determined with a Waters Alliance GPC 2000 series at     

Rare earth metal bis(alkyl) complexes bearing amino phosphine ligands: Synthesis and catalytic activity toward ethylene polymerization

Reactions of neutral amino phosphine compounds HL^1-3 with rare earth metal tris(alkyl)s, Ln(CH₂SiMe₃)₃(THF)₂, afforded a new family of organolanthanide complexes, the molecular structures of which are strongly dependent on the ligand framework. Alkane elimination reactions between 2-(CH₃NH)-C₆H₄P(Ph)₂ (HL¹) and Lu(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h generated mono(alkyl) complex (L¹)₂Lu(CH₂SiMe₃)(THF) (1). Similarly, treatment of 2-(C₆H₅CH₂NH)-C₆H₄P(Ph)₂ (HL²) with Lu(CH₂SiMe₃)₃(THF)₂ afforded (L²)₂Lu(CH₂SiMe₃)(THF) (2), selectively, which gradually deproportionated to a homoleptic complex (L²)₃Lu (3) at room temperature within a week. Strikingly, under the same condition, 2-(2,6-Me₂C₆H₃NH)-C₆H₄P(Ph)₂ (HL³) swiftly reacted with Ln(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h to yield the corresponding lanthanide bis(alkyl) complexes L³Ln(CH₂SiMe₃)₂(THF)_n (4a: Ln = Y, n = 2; 4b: Ln = Sc, n = 1; 4c: Ln = Lu, n = 1; 4d: Ln = Yb, n = 1; 4e: Ln = Tm, n = 1) in high yields. All complexes have been well defined and the molecular structures of complexes 1, 2, 3 and 4b-e were confirmed by X-ray diffraction analysis. The scandium bis(alkyl) complex activated by AlEt₃ and [Ph₃C][B(C₆F₅)₄], was able to catalyze the polymerization of ethylene to afford linear polyethylene.     

The synthesis,structure, and ethylene polymerization of dimeric salicylaldiminato titanium complexes

A series of dimeric titanium complexes bearing salicylaldiminates, [4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OTiCl₂(µ-Cl)]₂ [R?=?H (1); R?=?^tBu (2); R?=?NO₂ (3)], have been synthesized in high yield (>90%) by the reaction of corresponding 4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OSiMe₃ with TiCl₄. The molecular structure of 2 has been confirmed by single-crystal X-ray diffraction analysis. When activated with methylaluminoxane, these complexes exhibit good catalytic activity for ethylene polymerization.     

Effect of ketimide ligand for ethylene polymerization and ethylene/norbornene copolymerization catalyzed by (cyclopentadienyl)(ketimide)titanium complexes-MAO catalyst systems: Structural analysis for CpTiCl2(NCPh2)

Ligand effects on the catalytic activity [and norbornene (NBE) incorporation] for both ethylene polymerization and ethylene/NBE copolymerization using half-titanocenes (titanium half-sandwich complexes) containing ketimide ligand of type Cp′TiCl₂[NC(R¹)R²] [Cp′ = Cp (1), C⁵Me⁵ (Cp^∗, 2); R¹,R² = ^tBu,^tBu (a), ^tBu,Ph (b), Ph,Ph (c)]-methylaluminoxane (MAO) catalyst systems have been investigated. CpTiCl₂[NC(^tBu)Ph] (1b) CpTiCl₂(NCPh₂) (1c), and Cp^∗TiCl₂(NCPh₂) (2c) were prepared and identified; the structure of Cp^∗TiCl₂(NCPh₂) (2c) was determined by X-ray crystallography. The catalytic activity for ethylene polymerization increased in the order: 1a > 1b > 1c, suggesting that an electronic nature of the ketimide ligand affects the activity. However, molecular weight distributions for resultant (co)polymers prepared by 1b,c and by 2c-MAO catalyst systems were bi- or multi-modal, suggesting that the ketimide substituent plays a key role in order for these (co)polymerizations to proceed with single catalytically-active species. CpTiCl₂(NC^tBu₂) (1a) exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization.     

Synthesis, characterization, and ethylene polymerizations of various N-O chelated mono Cp titanium complexes

Various mono Cp^∗ type titanium mononuclear complexes (1-5) and dinuclear complexes (6 and 7) containing non-Cp type chelate ligand, picolinate group, which has multi-binding sites of N and O atoms were synthesized and fully characterized by ¹H and ¹³C NMR spectroscopy, mass spectroscopy, elemental analysis, and X-ray diffraction study. The 1 and 2/MMAO catalytic systems for ethylene polymerization exhibited a moderate activity and gave the polyethylenes with broad molecular weight distributions.     

Half-zirconocene anilide complexes: synthesis, characterization and catalytic properties for ethylene polymerization and copolymerization with 1-hexene

A number of half-zirconocene anilide complexes of the type Cp*ZrCl(2)[N(2,6-R(1)(2)C(6)H(3))R(2)] [R(1) = (i)Pr (1, 3), Me (2); R(2) = Me (1, 2), Bn (3)] and Cp*ZrCl[N(2,6-Me(2)C(6)H(3))Me](2) (4) (Cp* = pentamethylcyclopentadienyl) were synthesized from the reactions of Cp*ZrCl(3) with the lithium salts of the corresponding anilide in diethyl ether at room temperature. All new zirconium complexes were characterized by (1)H and (13)C NMR and elemental analysis. Molecular structures of complexes 1, 2 and 4 were determined by single crystal X-ray diffraction analysis. Upon activation with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), complexes 1-4 exhibit good catalytic activity for ethylene polymerization, and produce polyethylene with a moderate molecular weight. Among these zirconium complexes, complex 1 shows the highest catalytic activity while complex 4 shows the lowest catalytic activity for ethylene polymerization. Complexes 1-3 also exhibit moderate catalytic activity for copolymerization of ethylene with 1-hexene, and produce copolymers with relatively high molecular weight and reasonable 1-hexene incorporation. In addition, the activation procedure of these catalyst systems were studied by (1)H NMR spectroscopy.     

双功能钛硅分子筛的合成、表征及催化性能

以四丙基溴化铵为模板剂, 硅溶胶为硅源, 正丁胺为碱源, 采用水热合成的方法, 将三价离子(Al³⁺, B³⁺或Fe³⁺)和Ti⁴⁺同时引入到MFI型分子筛的骨架, 得到同时具有氧化和酸催化活性的双功能钛硅分子筛M-TS-1(M=Al, B或Fe). 通过X射线粉末衍射、傅里叶变换红外光谱、紫外-可见漫反射光谱、氨程序升温脱附、电感耦合等离子体原子发射光谱和N₂吸附-脱附等温线手段对样品进行了表征. 结果表明, 三价离子的引入, 提高了TS-1的酸强度和酸量. 采用乙烯选择氧化为探针反应考察了M-TS-1的催化性能. 结果表明, Al-TS-1和B-TS-1在乙烯环氧化及后续的开环溶剂解反应中表现出较高的催化性能, H₂O₂的转化率在95%以上, H₂O₂的利用率大于90%, 乙二醇和乙二醇单甲醚的总收率可达10%以上.     

Synthesis of palladium complexes containing 2-methoxycarbonyl-6-iminopyridine ligand and their catalytic behaviors in reaction of ethylene and norbornene

A series of palladium complexes (C1-C7) have been prepared by the reaction of PdCl₂(CH₃CN)₂ with 2-methoxycarbonyl-6-iminopyridines, L1-L7. The 2-methoxycarbonyl-6-iminopyridines and their complexes were fully characterized by FT-IR, NMR spectra and elemental analysis. Structures of C1, C2, C4, C5 and C6, C7 were determined by X-ray crystallography, and these complexes fold slightly distorted square planar structures around palladium coordinated with two nitrogen atoms and two chlorides. These palladium complexes exhibited moderate catalytic activities for ethylene dimerization and/or polymerization in the presence of methylaluminoxane, and showed remarkable catalytic activity for norbornene polymerization. The catalytic behaviors of these complexes were highly affected by both the ligand employed and reaction conditions.     

Synthesis, characterization, and catalytic activities in syndiospecific polymerization of styrene for half-sandwich titanium complexes with non-Cp tridentate dianionic ligands MeN(CH2CR2O)2

New half-titanocenes, Cp^∗TiCl[(OCR₂CH₂)NMe(CH₂CR^′₂O)] [R,R′ = H (1), R,R′ = Me, H, (2), R,R′ = Me (3)], were prepared from Cp^∗TiCl₃ (4) with the corresponding alcohols in the presence of triethylamine. X-ray analysis shows that 1 has slightly distorted trigonal bipyramidal geometry around Ti. These complexes exhibited moderate catalytic activities for syndiospecific styrene polymerization in the presence of MAO and the activity increased in the order: 2 > 1 > 4 > 3 (at 50 °C), 1 > 2 > 4 > 3 (at 70 °C and 90 °C).     

Titanium complexes with modifiable pyrazolonato and pyrazolonato-ketimine ligands: Synthesis, characterization and ethylene polymerization behavior

Six titanium complexes bearing pyrazolonato and pyrazolonato-ketimine ligands have been synthesized and characterized. It was found that the ligand structure of the synthesized complexes has a significant effect on the catalytic performance of the complexes. The synthesized complexes were activated with MAO and their activities varied from negligible to high (up to 612 kg_PE/(mol_Ti h bar). The pyrazolonato-ketimine complex with a phenyl substituent in the imine part was the most active in the series and it was the only one producing polyethylenes with relatively narrow molecular weight distribution (M_w/M_n from 1.6 to 2.2).     

Synthesis,characterization, and catalytic application of a zinc(II) complex bearing a pyrazole-based ligand

The reaction between ZnCl₂ and N,N-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]-1-phenylethylamine (bdmppea) affords [(bdmppea)ZnCl₂], whose structure has been determined by X-ray crystallography. The [(bdmppea)ZnEt₂] complex in situ prepared by the reaction between [bdmppea] and ZnEt₂ exhibited high activity toward the polymerization reaction of rac-lactide at room temperature. However, its activity decreased sharply with decreasing temperature. Stereospecificity of this catalyst characterized by heterotacticity (P_r) was determined by homonuclear decoupled NMR spectroscopy, which value was ∼0.58.     

Novel titanium complexes bearing two chelating phenoxy‐imine ligands and their catalytic performance for ethylene polymerization

Three substituted salicylaldimine ligands ( 1a, 2a, 3a ) and their titanium complexes bis[N‐(5‐nitrosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 1 ), bis[N‐(5‐chlorosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 2 ) and bis[N‐(5‐bromosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 3 ) were synthesized and characterized by mass spectra, ¹H NMR and elemental analyses, as well as complex 1 by X‐ray structure analysis. In the presence of methylaluminoxane (MAO), 1, 2 and 3 are efficient catalysts for ethylene polymerization in toluene. Under the conditions of T = 60 °C, p = 0.2 MPa, and n(MAO)/n(cat) = 1500, the activities of 1–3 reached 4.55–8.80 × 10⁶ g of PE (mol of Ti h bar)^?1, which is much higher than that of the unsubstituted complex bis[N‐(salicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 4 ). The viscosity‐average molecular weight of polyethylene ranged from 24.8 × 10⁴ to 44.9 × 10⁴ g/mol for 1–3 and the molecular weight distribution M_w/M_n from 1.85 to 2.34. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature are favorable for 1–3 /MAO to rise the catalytic activity and the molecular weight of polyethylene. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis, ethylene polymerization and dynamic features of titanium and zirconium complexes bearing chelating malonate-based enaminoketonato ligands

Synthesis of new titanium and zirconium dichloro complexes bearing malonate-based enaminoketonato (N,O) ligand is described. NMR studies of the catalyst precursors reveal that synthesized complexes have different configurational isomers in solution state and that they undergo structural change within NMR timescale. After MAO activation complexes exhibited low to moderate activities in ethylene polymerization producing bi- or multimodal polyethylenes.     

Synthesis of phenoxy-ester titanium complexes with different R1 and R2 substituents and their catalytic properties

A series of phenoxy-ester ligated titanium complexes with different R₁ and R₂ substituents was synthesized. The structures of 3-silylsubstituted salicylate ligands and their corresponding titanium complexes were characterized using infrared spectrometer, nuclear magnetic resonance spectroscopy and mass spectrometer. The novel [O, O] bidentate coordination compounds with different R₁ and R₂ substituents were then used as the catalysts for ethylene-propylene copolymerization together with ⁱBu₃A1/Ph₃CB(C₆F₅)₄ as the cocatalysts in toluene. The correlations between R₁, R₂ substituents of titanium complexes and polymerization activity, polymer molecular weight were studied. The catalytic activity of titanium complex was observed to decline with increasing the size of R₂, whereas the copolymers with higher molecular weight were synthesized using the titanium complex with larger R₁ substituent. The ethylene propylene copolymers prepared using different titanium complex catalysts were all random copolymers.     

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands: Synthesis, characterization and ethylene polymerization

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands, bis((3,5-di-tert-butyl-C₆H₂-2-O)R₁CN (2-R₂-C₆H₄))ZrCl₂ {R₁ = Me, R₂ = H (2a); R₁ = Et, R₂ = H (2b); R₁ = Ph, R₂ = H (2c); R₁ = 2-Me-Ph, R₂ = H (2d); R₁ = 2-F-Ph, R₂ = H (2e); R₁ = 2-Cl-Ph, R₂ = H (2f); R₁ = 2-Br-Ph, R₂ = H (2g); R₁ = Ph, R₂ = Me (2h); R₁ = Ph, R₂ = F (2i)}, have been prepared, characterized and tested as catalyst precursors for ethylene polymerization. Crystal structure analysis reveals that complex 2c has a six coordinate center in a distorted octahedral geometry with trans-O, cis-N, cis-Cl arrangement which possesses approximate C₂ symmetry. When activated with methylaluminoxane (MAO), complexes 2a-2i exhibited high ethylene polymerization activities of 10⁶-10⁸ g PE (mol M h)⁻¹. Compared with the bis(phenoxyimine) zirconium analogues bis((3,5-di-tert-butyl-C₆H₂-2-O)CHNC₆H₅)ZrCl₂ (3), the introduction of substituent on the carbon atom of the imine double bond enhanced the catalytic activity and molecular weight of prepared polyethylene. Especially, when the H atom at the carbon atom of the imine double bond was replaced by 2-fluoro-phenyl with strong electronic-withdrawing property, complex 2e displayed the highest catalytic activity, and the polyethylene obtained possessed the highest molecular weight and melt point.     

Synthesis, structure and ethylene polymerization behavior of titanium phosphinoamide complexes

(Phosphinoamide)(cyclopentadienyl)titanium(IV) complexes of the type Cp*TiCl₂(η²-Ph₂PNR) [Cp*=C₅Me₅; R = t-Bu (2a), R = n-Bu (2b), R = Ph (2c)] have been prepared by the reaction of Cp*TiCl₃ with the corresponding lithium phosphinoamides. The structure of Cp*TiCl₂(η²-Ph₂PN^tBu) (2a) and Cp*TiCl₂(η²-Ph₂PNPh) (2c) have been determined by X-ray crystallography. These complexes exhibited moderate catalytic activities for ethylene polymerization in the presence of modified methylaluminoxane (MMAO). Catalytic activity of up to 2.5 × 10⁶ g/(mol Ti h) was observed when activated by i-Bu₃Al/Ph₃CB(C₆F₅)₄.     

Nickel complexes bearing 2-(1H-benzimidazol-2-yl)-phenoxy ligands: Synthesis, characterization and ethylene oligomerization

A series of 2-(1H-benzimidazol-2-yl)-phenols and their nickel complexes have been synthesized and characterized by elemental and spectroscopic analysis. The molecular structures of ligand L4 and complex C5 were confirmed by X-ray diffraction analysis. X-ray crystallographic analysis revealed that complex C5 has a six-coordinated distorted octahedral geometry. Upon activation with Et₂AlCl, these nickel(II) complexes showed good activity for ethylene oligomerization. When PPh₃ was added as an auxiliary ligand to the catalytic system, an increased activity as high as 1.60 × 10⁷ g mol⁻¹ (Ni) h⁻¹ was observed. The ligand environment and reaction conditions remarkably affected the catalytic behavior of these nickel complexes.     

Nickel (II) complexes bearing 2-ethylcarboxylate-6-iminopyridyl ligands: synthesis, structures and their catalytic behavior for ethylene oligomerization and polymerization

A series of nickel (II) complexes (L)NiCl₂ (7-9) and (L)NiBr₂ (10-12) were prepared by the reactions of the corresponding 2-carboxylate-6-iminopyridine ligands 1-6 with NiCl₂ · 6H₂O or (DME)NiBr₂ (DME = 1,2-dimethoxyethane), respectively. All the complexes were characterized by IR spectroscopy and elemental analysis. Solid-state structures of 7, 8, 10, 11 and 12 were determined by X-ray diffraction. In the cases of 7, 8 and 10, the ligands chelate with the nickel centers in tridentate fashion in which the carbonyl oxygen atoms coordinate with the metal centers, while the carbonyl oxygen atoms are free from coordinating with the nickel centers in 11 and 12. Upon activation with methylaluminoxane (MAO), these complexes are active for ethylene oligomerization (up to 7.97 × 10⁵ g mol⁻¹ (Ni) h⁻¹ for 11 with 2 equivalents of PPh₃ as auxiliary ligand) and/or polymerization (1.37 × 10⁴ g mol⁻¹ (Ni) h⁻¹ for 9). The ethylene oligomerization activities of 7-12 were significantly improved in the presence of PPh₃ as auxiliary ligands. The effects of the coordination environment and reaction conditions on the ethylene catalytic behaviors have been discussed.     

Synthesis and characterization of iron and cobalt dichloride bearing 2-quinoxalinyl-6-iminopyridines and their catalytic behavior toward ethylene reactivity

The 1-(6-(quinoxalin-2-yl)pyridin-2-yl)ethanone was synthesized in order to prepare a series of N-(1-(6-(quinoxalin-2-yl)pyridine-2-yl)ethylidene)benzenamines (L1-L7), which provided new alternative N^∧N^∧N tridentate ligands coordinating with iron(II) and cobalt(II) dichloride to form complexes of general formula LFeCl₂ (1-7) and LCoCl₂ (8-14). All organic compounds were fully characterized by NMR, IR spectroscopic and elemental analysis along with and magnetic susceptibilities and metal complexes were examined by IR spectroscopic and elemental analysis, while their molecular structures (L1, L4, 1, 4, 10, 13) were confirmed by single crystal X-ray diffraction analysis. Upon activation with methylaluminoxane (MAO), all iron complexes gave good catalytic activities for ethylene reactivity (oligomerization and polymerization), while their cobalt analogues showed moderate activities toward ethylene oligomerization with modified methylaluminoxane (MMAO). Various reaction parameters were investigated for better catalytic activities, the higher activities were observed at elevated ethylene pressure. The iron and cobalt complexes with para-methyl substituents of aryl group linked on imino group showed highest activity.