Dioxouranium(VI)-carboxylate complexes: A calorimetric and potentiometric investigation of interaction with oxalate at infinite dilution and in NaCl aqueous solution at I = 1.0 mol L and T = 25 °C

In this paper we investigated the interactions between dioxouranium(VI) and oxalate using (H⁺-glass electrode) potentiometry and titration calorimetry. Potentiometric measurements were carried out in NaCl aqueous solutions and at T = 25 °C in a wide range of experimental conditions (concentrations, ligand/metal molar ratio, pH, titrants) at low ionic strength values (I ≤ 0.090 mol L⁻¹, without supporting electrolyte) and at I = 1.0 mol L⁻¹; different procedures were employed for the acquisition of experimental data and careful analysis of these data performed. In all cases the speciation model that best fits experimental data takes into account the formation of the binary mononuclear species UO₂(ox)⁰, UO₂(ox)₂²⁻, UO₂(ox)₃⁴⁻ widely reported in literature, the ternary hydroxyl mononuclear species UO₂(ox)OH⁻, UO₂(ox)(OH)₂²⁻, UO₂(ox)₂OH³⁻, UO₂(ox)₃OH⁵⁻, the protonated ternary mononuclear species UO₂(ox)₃H³⁻ and the binuclear species (UO₂)₂(ox)₅⁶⁻.Calorimetric measurements were carried out following similar procedures and in the same experimental conditions as employed for the potentiometric measurements at I = 1.0 mol L⁻¹ in NaCl. The stability of UO₂²⁺-oxalate²⁻ complexes is fairly high and their main contribution to stability is entropic in nature. Some linear empirical relationships were found which make it possible to calculate (i) the contribution of a single bond: and ; (ii) chelate stabilisation per ring: and and (iii) the mean stability of negatively charged Na⁺-ion pair complexes: log^TK = (0.46 ± 0.02)·|z| (z = charge of complex species), ΔG° = −(2.60 ± 0.1)·|z| kJ mol⁻¹ and TΔS° = 2.5 ± 0.5 kJ mol⁻¹. Both potentiometric and calorimetric results provide evidence of the penta-coordination of the species UO₂(ox)₃⁴⁻. SIT parameters were calculated from the data at I = 0 and I = 1.02 mol kg⁻¹. Comparisons are made with literature data. An insoluble dioxouranium(VI) ternary complex was synthesised (at I = 1.0 mol L⁻¹ in NaCl) and characterised by thermoanalysis and elemental analysis.     

Ruthenium (II) complexes of the chelating phosphine borane H2ClB · dppm

Reaction of H₂ClB · PPh₂CH₂PPh₂ (H₂ClB · dppm) with results in displacement of all three acetonitrile ligands and the formation of (1), which has been characterised crystallographically. Reaction with carbon monoxide results in a change from η² to η¹ of the borane ligand to afford (2). Compound 1 undergoes H/D exchange under a D₂ atmosphere to afford , while 2 does not.     

Standard enthalpy of formation of aqueous titanyl chloride, TiOCl2(aq), at T = 298.15 K

Enthalpies of solution of TiCl₄(l) in aqueous perchloric acid have been measured in an isothermal calorimeter at T = 298.15 K at ionic strengths of (1.964, 3.002, and 4.062) mol · kg⁻¹. These results were extrapolated to zero ionic strength using an extended Debye-Hückel equation, to yield the standard enthalpy of solution ; from which the standard partial molar enthalpy of formation of the titanyl ion was derived: .     

(p, Vm, T) measurements of (cyclohexane + nonane) at temperatures from 298.15 K to 328.15 K and at pressures up to 40 MPa

The densities and speeds of sound of (cyclohexane + nonane) were measured at four temperatures from 298.15 K to 328.15 K, and the respective values of excess volumes and adiabatic compressibility were calculated. Thereafter, the densities for the last system were measured at elevated pressures (0.1 to 40) MPa at four temperatures over the range 298.15 K to 328.15 K with a high-pressure apparatus. The high-pressure density data were fitted to the Tait equation and the isothermal compressibilities were calculated with a novel procedure with the aid of this equation. The low- and high-pressure values of calculated from the density data show that the deviations from ideal behaviour in the system decrease slightly as the temperature and pressure are raised. The data were fitted to the fourth-order Redlich-Kister equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters.     

Preparation, crystal structures, EPR and reflectance spectra of two new charge-transfer salts, [CpFeCpCH2N(CH3)3]4[XMo12O40] · nCH3CN (n = 0 for X = P or n = 1 for X = Ge)

Two new charge-transfer salts, [CpFeCpCH₂N(CH₃)₃]₄[PMo₁₂O₄₀] · CH₃CN (1) and [CpFeCpCH₂N(CH₃)₃]₄[GeMo₁₂O₄₀] (2), were synthesized by the traditional solution synthetic method and their structures were determined by single-crystal X-ray analysis. Salt 1 belongs to the triclinic space group P1, and salt 2 belongs to the triclinic space group . There exist the complex interactions of the cationic ferrocenyl donor and Keggin polyanion in the solid state. The solid state UV-Vis diffuse reflectance spectra indicate the presence of a charge-transfer band climbing from 450 nm to well beyond 900 nm for 1, a charge-transfer band from 460 to 850 nm with λ_max = 630 nm for 2.The EPR spectra of salts 1 and 2 at 77 K show a signal at g = 2.0048 and 1.9501, respectively, ascribed to the delocalization of one electron in reduced Keggin ion in salt 1 and the Mo^VI in [GeMo₁₂O₄₀]⁴⁻ is partly reduced to Mo^V owing to the charge-transfer transitions taking place between the ferrocenyl donors and the POM acceptors. The two compounds were also characterized by IR spectroscopy and cyclic voltammetry.     

The H2O-D2O solvent isotope effects on the molar volumes of alkali-chloride solutions at T = (288.15, 298.15, and 308.15) K

Densities of LiCl, NaCl, KCl, and CsCl in normal and heavy water solutions have been measured using a vibrating-tube densitometer with (1-2) · 10⁻⁶ precision at T = (288.15, 298.15, and 308.15) K over a wide concentration range from (0.1 to 5) molal, m. Solvent isotope effects (IE) on apparent molar volumes, as well as both on solute- and solvent-partial molar volumes were evaluated to establish their trend with cationic size in a systematic way. With the exception of the LiCl, both the “normal” standard IEs, , and the “inverse” excess IEs of the solutes, , increase linearly with the electrostriction effect of the cations (1/r_ion), while with increasing temperature and/or concentration, the excess effects become almost the same.In contrast to the solute excess IEs, which show linear m^1/2-dependence over the whole concentration range, except for LiCl, the “inverse” excess IEs of the solvent, , hardly change over the lower concentration range (, m ? 1). However, with further increase of the concentration, these IEs significantly decrease. Individual ionic standard and excess volume contributions are derived and the results are discussed in terms of structural concepts of ionic hydration.     

Syntheses, characterization and sensitized lanthanide luminescence of heteronuclear Pt-Ln (Ln = Eu, Nd, Yb) complexes with 2,2′-bipyridyl ethynyl ligands

Reaction of [Pt()Cl]⁺ ( = 4,4′,4′′-tri-tert-butyl-2,2′:6′,2′′-terpyridine) with 5-ethynyl-2,2′-bipyridine (HCCbpy) or 5,5′-bis(trimethylsilylethynyl)-2,2′-bipyridine (Me₃SiCCbpyCCSiMe₃) in the presence of cuprous iodide gives [Pt(^tBu₃tpy)(CCbpy)]⁺ (1) or [{Pt()}₂(CCbpyCC)]²⁺ (2) through Pt-acetylide σ-coordination, respectively. Incorporating 1 or 2 with Ln(hfac)₃(H₂O)₂ through 2,2′-bipyridyl chelating the Ln^III (Ln = Nd, Eu, and Yb) centers induces formation of a series of [Pt()(CCbpy){Ln(hfac)₃}]⁺ (PtLn) or [{Pt()}₂(CCbpyCC){Ln(hfac)₃}]²⁺ (Pt₂Ln) complexes, respectively. The structures of binuclear platinum(II) complex 2(PF₆)₂ and heterobinuclear PtNd complex 3(CF₃COO) were determined by single crystal X-ray diffraction. Both 1 and 2 exhibit typical low-energy absorption bands in near UV-Vis region, ascribed to dπ(Pt) → π^∗() MLCT and π(CCbpy/CCbpyCC) → π^∗() LLCT transitions. Upon formation of the PtLn or PtLn₂ complexes, the low-energy absorption bands are obviously blue-shifted (15-20 nm) compared with those in the Pt^II precursor 1 or 2. With excitation at 350 nm < λ < 550 nm which is the absorption region of MLCT and LLCT transitions, sensitized luminescence that is characteristic of the corresponding lanthanide(III) ions occurs in both PtLn and Pt₂Ln complexes. In contrast, Pt-based luminescence from the MLCT and LLCT states are mostly quenched in these Pt-Ln heteronuclear complexes, revealing that quite effective Pt → Ln energy transfer is operating from the Pt()(acetylide) chromophore to the lanthanide(III) centers.     

Enthalpies of solution of 1,1,3,3-tetramethylurea in normal and branched alkanols (C2-C4) at 298.15 K

The enthalpies of solution were determined for 1,1,3,3-tetramethylurea in ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol (2-methyl-2-propanol). Measurements were made at 298.15 K and molalities m ≅ (0.007 to 0.036) mol · kg⁻¹ with a precise isoperibol ampoule-type calorimeter. Standard enthalpies of solution and transfer from one alkanol to the other (including methanol) were calculated. The obvious relationship between the enthalpic and volumetric effects of solution of tetramethylurea in the n-alkanols (C₁-C₄) was discovered. The enthalpic effects of transfer caused by branching of the alkanol molecules, 1-propanol → 2-propanol, and 1-butanol → t-butanol, are opposite in sign and dominated by the configurational changes in the solvation environment of tetramethylurea.     

Mixing effects on the protonation of some polycarboxylates in NaClaq + KClaq at different ionic strengths

Protonation constants of succinic, 1,2,3-propanetricarboxylic and 1,2,3,4-butanetetracarboxylic anions were determined in NaCl_aq + KCl_aq mixtures, at three ionic strengths, I = 1.2, 3 and 4.5 mol L⁻¹. Experimental evidences showed that the function log K^H = f(y) (y = [Na⁺]/([Na⁺] + [K⁺])) is not linear, indicating mixing effects on the protonation constants. The Guggenheim zeroth approximation holds that the above function can be written as:

     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

Enthalpies of dilution of aqueous Li2B4O7 solutions at 298.15 K and application of ion-interaction model

The enthalpies of dilution have been measured for aqueous Li₂B₄O₇ solutions from 0.0212 to 2.1530 mol kg⁻¹ at 298.15 K. The relative apparent molar enthalpies, L_?, and relative partial molar enthalpies of the solvent and solute, and were calculated. The thermodynamic properties of the complex aqueous solutions were represented with a modified Pitzer ion-interaction model.     

Thermodynamic evaluation and optimization of the (Na2SO4 + K2SO4 + Na2S2O7 + K2S2O7) system

A complete, critical evaluation of all phase diagram and thermodynamic data was performed for all phases of the (Na₂SO₄ + K₂SO₄ + Na₂S₂O₇ + K₂S₂O₇) system and optimized model parameters were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range ordering, where the cations (Na⁺ and K⁺) are assumed to mix on a cationic sublattice, while anions were assumed to mix on an anionic sublattice. The Compound Energy Formalism was used for modelling the solid solutions of (Na,K)₂SO₄ and (Na,K)₂S₂O₇. The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature were reproduced within experimental error limits.     

Vapour pressure and excess Gibbs free energy of the ternary system {x1CH3F + x2HCl + x3N2O} at temperature of 182.33 K

The equilibrium pressure of ternary mixtures of {x₁CH₃F + x₂HCl + x₃N₂O} covering the entire composition range has been measured at temperature of 182.33 K by the static method. The system exhibits a minimum pressure for the binary {x₁CH₃F + x₂HCl}. The molar excess Gibbs free energy has been calculated from the experimental equilibrium pressure. For the equimolar mixture . The (p, x, y) surface for the ternary system and the corresponding curves for the three constituent binary mixtures obtained from the Peng-Robinson equation of state are in agreement with the experimental data.     

Partial molar volumes and heat capacities of the N-acetyl amide derivatives of the amino acids asparagine, glutamine, tyrosine, and lysine monohydrochloride in aqueous solution at temperatures from T = 288.15 K to T = 328.15 K

The partial molar volumes, , and partial molar heat capacities, , at infinite dilution have been determined for the compounds N-acetylasparaginamide, N-acetylglutaminamide, N-acetyltyrosinamide, and N-acetyllysinamide monohydrochloride in aqueous solution at T = (288.15, 298.15, 313.15, and 328.15) K. These results, along with the literature data for the compound N-acetylglycinamide, have been used to calculate the amino acid side-chain contributions to the thermodynamic properties. These side-chain contributions are compared with those obtained using small peptides as side-chain model compounds.     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

A catenated anion receptor based on indolocarbazole

A catenated anion receptor 7 comprising two indolocarbazole units was prepared by olefin ring-closing metathesis using Grubbs’ catalyst. Receptor 7 possesses a cage-like cavity where anions are encapsulated by forming four hydrogen bonds in the order of Cl⁻ > AcO⁻ >  >  > Br⁻ >  > I⁻ ≈  in 1% H₂O/acetone.