Acoustic carpet invisibility cloak with two open windows using multilayered homogeneous isotropic material

We present a method for designing an open acoustic cloak that can conceal a perturbation on flat ground and simultaneously meet the requirement of communication and matter interchange between the inside and the outside of the cloak. This cloak can be constructed with a multilayered structure and each layer is an isotropic and homogeneous medium. The design scheme consists of two steps: firstly, we apply a conformal coordinate transformation to obtain a quasi-perfect cloak with heterogeneous isotropic material; then, according to the profile of the material distribution, we degenerate this cloak into a multilayered-homogeneous isotropic cloak, which has two open windows with negligible disturbance on its invisibility performance. This may greatly facilitate the fabrication and enhance the applicability of such a carpet-type cloak.     

Sound scattering from underwater elastic spherical shell covered with multilayered medium approximated acoustic cloak

The anechoic performance and mechanism of underwater elastic spherical shell covered with coating are studied at low frequencies.The acoustic cloak is anisotropic material,which can be designed with homogeneous isotropic materials on the basis of effective medium approximation theory.The analytic expression of scattering acoustic field from the shell covered with multilayered medium is formulated and the scattering form function,resonance mode,acoustic field distribution are computed,the scattering characteristics and mechanism of transmission are analyzed.The results show that the direction of sound transmission inside the multilayered medium is changed,the acoustic field is deflected gradually,and the acoustic energy flux is guided around the target,which reduces the scattering intensity at low frequencies,the acoustic intensity of target＇s surface is very weak.Excepting the first resonance peak in spectrum produced by the zero order partial wave,the other resonance modes of elastic spherical shell are not excitated and the multilayered medium can suppress the resonance of the spherical shell effectively.     

Broadband cylindrical acoustic cloak for linear surface waves in a fluid

We describe the first practical realization of a cylindrical cloak for linear surface liquid waves. This structured metamaterial bends surface waves radiated by a closely located acoustic source over a finite interval of Hertz frequencies. We demonstrate theoretically its unique mechanism using homogenization theory: the cloak behaves as an effective anisotropic fluid characterized by a diagonal stress tensor in a cylindrical basis. A low azimuthal viscosity is achieved, where the fluid flows most rapidly. Numerical simulations demonstrate that the homogenized cloak behaves like the actual structured cloak. We experimentally analyze the decreased backscattering of a fluid with low viscosity and finite density (methoxynonafluorobutane) from a cylindrical rigid obstacle surrounded by the cloak when it is located a couple of wavelengths away from the acoustic source.     

Optimization of loss and gain multilayers for reducing the scattering of a perfect conducting cylinder

Reduction of electromagnetic scattering from a conducting cylinder could be achieved by covering it with optimized multilayers of normal dielectric and plasmonic material. The plasmonic material with intrinsic losses could degrade the cloaking effect. Using a genetic algorithm, we present the optimized design of loss and gain multilayers for reduction of the scattering from a perfect conducting cylinder. This multilayered structure is theoretically and numerically analyzed when the plasmonic material with low loss and high loss respectively is considered. We demonstrate by full-wave simulation that the optimized nonmagnetic gain-loss design can greatly compensate the decreased cloaking effect caused by loss material,which facilitates the realization of practical electromagnetic cloaking, especially in the optical range.     

Reducing crosstalk between nanowire-based hybrid plasmonic waveguides

Hybrid plasmonic waveguides based on a surface oxidized dielectric nanowire placed on a metal surface can facilitate simultaneously deep subwavelength mode confinement and large propagation length. Directional coupling based on such waveguides are theoretically investigated. Much lower crosstalk is noticed for such hybrid plasmonic waveguides compared to conventional waveguides based on bare dielectric nanowires. Some modifications, such as vertically placing the metal surfaces or using a metallic block between the nanowires, are studied which can further reduce the crosstalk between two waveguides. The proposed low crosstalk structures based on hybrid plasmonic waveguides can provide a simple platform for plasmonic integration which can at the same time easily interface with traditional photonic circuits.     

Fluorescence characteristics of a molecule in the vicinity of a plasmonic nanomatryoska: Nonlocal optical effects

The fluorescence characteristics of a dipole molecule in the vicinity of a spherical multilayered metallic nanoshell (a plasmonic nanomatryoska) of ultra-small dimensions is studied via electrodynamic modeling, where we have computed the fluorescence decay rates, the shifts in emission frequency, and the overall fluorescence yields for molecular dipoles of both tangential and radial orientations. Our focus is on structures of ultra small dimensions in order to elucidate the possibly novel nonlocal optical effects in such a phenomenon. The results show that at very close distances between the molecule and the nanoshell, the nonlocal effects in general lead to smaller structure-induced effects with broadened and blue-shifted plasmonic resonances. These effects include overall smaller induced decay rates, smaller red-shifts in emission frequency, and somewhat larger fluorescence yields at low emission frequencies. Physical interpretation of our simulation results is provided.     

A revisit to imperfect acoustic cloak of multi-layered shell structures considering sound speed and impedance matching

An imperfect multi-layered acoustic cloak is proposed for a two-dimensional cloaking zone based on feasible material properties. In this model, the matching of sound speed and acoustic impedance has been investigated, and the effects of material and geometric properties on the imperfect cloak have been studied for better design of the imperfect cloak. The imperfect cloak could be improved using appropriate changes in the design parameters. By increasing the thickness of the high density layer and with some changes in the sound speeds between the high density and the low density layers, the imperfect cloaking model showed better cloaking performance than Cummer–Schurig cloak. Also, present results show that the sound speed matching is more important for acoustic cloaking than the impedance matching. These results can be applied as a practical design guide for two-dimensional cloaks using multilayered structures composed of naturally existing materials.     

Multifrequency super-thin cloaks

Bandwidth and thickness have become the most troublesome problems for EM cloaks. In this paper, we propose to solve the two problems using connected patches based on the microwave network model. By covering an obstacle with combined connected patches, cloaking effect can be achieved at multiple frequencies so as to expand the operating band. As an explicit example, a dual-band super-thin cloak using two different connected patch unit cells is demonstrated. Cloaking effect can be achieved at 3.50 GHz and 4.14 GHz simultaneously with an 8 dB transmission enhancement. The cloak design method provides a new route to broadening the bandwidth of thin EM cloaks.     

Optical cloaking of cylindrical objects by using covers made of core-shell nanoparticles

In this Letter, we propose an engineered design of optical cloaks based on the scattering cancellation technique and intended to reduce the observability of cylindrical objects. The cover, consisting of a periodic arrangement of core-shell nanospheres, is designed in such a way to exhibit near-zero values of the real part of the homogenized effective permittivity at optical frequencies. Full-wave numerical simulations, considering the measured data of the dielectric function of the plasmonic material composing the shell, show that the cloak is able to reduce by about 6 dB the scattering cross section of a finite-length cylinder at around 740 THz with a -3 dB fractional bandwidth of about 7%. We show also that this result is not significantly affected by the perturbation of the periodic alignment of the core-shell nanospheres, due to possible fabrication issues or to an amorphous arrangement.     

Plasmon-induced transparency in metamaterials

A plasmonic "molecule" consisting of a radiative element coupled with a subradiant (dark) element is theoretically investigated. The plasmonic molecule shows electromagnetic response that closely resembles the electromagnetically induced transparency in an atomic system. Because of its subwavelength dimension, this electromagnetically induced transparency-like molecule can be used as a building block to construct a "slow light" plasmonic metamaterial.     

Three dimensional multilayered acoustic cloak with homogeneous isotropic materials

A three-dimensional (3D) spherical acoustic cloak is designed using an acoustic layered system, which can hide an object from the detection of acoustic wave in arbitrary direction. The cloak is constructed from multilayered concentric spherical shells filled with homogeneous isotropic materials. Based on spherical wave expansion method, we confirm that significant low-reflection, acoustic-shadow-reducing, and wavefront-bending effects in 3D space can be achieved by the proposed cloak. The angle distribution of the scattered wave is further evaluated by the far-field scattering pattern. In addition, the cloak is demonstrated to work efficiently in a wide bandwidth in which the cloaking efficiency decreases with increasing frequency. This study may be helpful to design high-performance 3D acoustic cloaks for broadband acoustic waves in all incidence directions.     

Quasi-invisible thermal cloak based on homogenous materials

Invisible thermal cloak, which cancels distortions of temperature distribution caused by objects, has many potential applications in thermal engineering. In this letter, we theoretically proposed and simulatively verified a new design method for quasi-invisible thermal cloak. Different from conventional transformation thermodynamics that focus on complete invisibility, our method only decreases the effective scale of objects to small enough and realizes a quasi-invisible cloaking effect in thermal conduction regime. However, this quasi-invisible cloak has the same effect as that of invisible thermal cloak in practical engineering. More important, our cloak is easy to construct by natural materials due to its homogenous thermal properties and can cloak objects with different shapes and properties. These characters make the clock more comfortable for engineering applications.     

Acoustic cloak with duplex communication ability constructed by multilayered homogeneous isotropic materials

Based on the effective medium theory, we propose a practical implementation of a cylindrical acoustic cloak with a concentric alternating multilayered structure of homogeneous isotropic materials, which can perfectly mimic the ideal radius-dependent and anisotropic ordinary lens cloak. The proposal exhibits near-ideal cloaking performance such as low-scattering and shadow-reducing in a wide frequency range, thus it can hide an object from the detection of acoustic waves. The acoustic wave can pass through the cloaking shell with an unchanged wavefront shape, which endues the cloaked object with duplex communication ability. More simulations on the acoustic far-field scattering patterns and the total scattering cross-section are performed to investigate the layer number and the frequency dependence of the cloaking effect, and the results show that the thinner layers exhibit a better cloaking effect. The proposal may significantly facilitate the experimental demonstration of the acoustic cloak.     

Bandwidth enhancement of transformation optics-based cloak with reduced parameters

In this paper, dispersive cloak design with broad bandwidth and minimal scattering cross section is proposed by appropriately selecting a radial permeability for each shell in a discretized reduced cloak. The dispersive medium is constructed by artificially varying the inner radius of the cloak with frequency, and this variation results into unique material properties at every frequency. The variation of inner radius of the cloak with frequency is artificial since the actual physical dimension of inner radius remains invariant. The relation between bandwidth and geometrical parameters of cloak is obtained by ensuring that transformation media must satisfy the condition that group velocity must remain less than the speed of light along every direction for a finite frequency range. The proposed cloak provides \(8.9\,\%\) bandwidth with respect to the center frequency for \(50\,\%\) reduction in total scattering cross section, and at the design frequency, the minimum scattering cross section obtained is \(0.266\). The proposed dispersive cloak design is verified by numerical full-wave simulations results which also confirm good cloaking performance.     

Tunable slow light based on detuned coupling between graphene nanoribbon and square ring splitting modes

We proposed and numerically investigated a newly slow light structure with graphene doublet detuned coupling effect. The novelty and uniqueness of the proposed structure is that the bandwidth and group index can be enhanced simultaneously by changing the length or chemical potential of the nanoribbon resonator. The maximum group index can attain to 131 at \(\mu_{c}\)?=?0.145 eV with the bandwidth of 0.85 THz. By means of the standing wave distribution of square ring splitting modes, the group indices can be enhanced at one window and suppressed at another by adjusting the coupling position of nanoribbon. The proposed structure would have potential prospect in realizing plasmonic filter, optical nonlinearity, optical buffering and storage devices at terahertz frequencies.     

近似声斗篷的多层介质覆盖水中弹性球壳的声散射

对水中弹性球壳的低频覆盖层消声效果和消声机理进行研究。声斗篷(Acoustic cloak)是各向异性的超常材料,根据有效介质近似理论(Effective MediumApproximationTheory),采用各向同性多层介质近似各向异性材料的声斗篷,推导出覆盖多层介质水中弹性球壳散射声场的解析表达式,计算了弹性球壳覆盖多层介质前后的散射形态函数、谐振模态以及声场分布,分析了覆盖前后球壳的声散射特性和声传播机理。研究表明,覆盖层内的声波在多层介质之间的声传播方向发生改变,声场形成弯曲变形,声能流绕过目标,这不仅极大的降低了低频散射强度,而且使到达弹性体表面的声场强度非常小,散射频响中除了0阶子波产生的第一个谐振峰外,无法激发弹性球壳的其它谐振模态,有效的抑制弹性球壳的谐振散射。      

Interplay between out-of-plane magnetic plasmon and lattice resonance for modified resonance lineshape and near-field enhancement in double nanoparticles array

Two-dimensional double nanoparticle （DNP） arrays are demonstrated theoretically, supporting the interaction between out-of-plane magnetic plasmons and in-plane lattice resonances, which can be achieved by tuning the nanoparticle height or the array period due to the height-dependent magnetic resonance and the periodicity-dependent lattice resonance. The interplay between the two plasmon modes can lead to a remarkable change in resonance lineshape and an improvement on magnetic field enhancement. Simultaneous electric field and magnetic field enhancement can be obtained in the gap region between neighboring particles at two resonance frequencies as the interplay occurs, which presents “open” cavities as electromagnetic field hot spots for potential applications on detection and sensing. The results not only offer an attractive way to tune the optical responses of plasmonic nanostructure, but also provide further insight into the plasmon interactions in periodic nanostructure or metamaterials comprising multiple elements.     

Brillouin light scattering from spin waves in magnetic layers and multilayers

We give an overview on our experimental and theoretical investigations of Brillouin light scattering in magnetic thin films, layered magnetic structures and superlattices. For epitaxial Fe(1 10) layers on W(1 10) the in-plane and out-of-plane magnetic surface anisotropy constants are determined, and the influence of Pd overlayers on the surface anisotropies is studied. For Fe/Pd superlattices a magnetic polarization of the Pd at the interfaces is established and the interface anisotropy constant is determined. For second order Fe/Pd superlattices, formed by alternating two Fe/Pd bilayers with different repeat periods, the Brillouin spectrum is obtained and compared to calculations. In the case of magnetic/nonmagnetic multilayered structures we investigate theoretically the crossing regime between dipolar and exchange-dominated modes. For small spacer-layer thicknesses, interlayer exchange coupling shifts the spin-wave frequencies of all but the highest-frequency dipolar mode into the exchange-mode regime. In case of all-magnetic multilayered structures, such as Fe/Ni multilayers, a new type of propagating collective excitations arising from coupled exchange modes is predicted.     

Electric field enhancement between two parallel cylinders due to plasmonic resonance

We theoretically examine the electric field enhancement in the narrow gap between two parallel cylinders due to the plasmonic resonance. The resonance condition and the field enhancement factor are found explicitly. It is shown that the resonance occurs at frequencies lower than the plasma frequency. This effect results from the special geometry: the gap width between parallel cylinders is much smaller than their radii. It is also shown that the enhancement coefficient is much larger than the one for a single cylinder and is determined together with the resonance frequency by the system geometry.