Proton resonance spectra of heterocycles—VII: Proton NMR spectra of 2-methyl-benzoxazoles,-benzothiazoles and -benzoselenazoles

Chemical shifts and coupling constants are reported for a series of the title compounds and the effects of substituents on these values correlated with the corresponding effects in benzenes. Partial bond fixation in these and other benzo-heterocycles is discussed together with the general prediction of NMR parameters in substituted heterocycles.     

Access to functionalised silver(I) and gold(I) N-heterocyclic carbenes by [2 + 3] dipolar cycloadditions

A new strategy was developed for the modification of silver(I) and gold(I) N-heterocyclic carbenes. Azido groups were grafted and used either by copper-catalysed azide-alkyne cycloaddition before metallation or by thermal and "strain-promoted" 1,3-dipolar cycloaddition after metallation to functionalise the metal-NHCs.     

Transition states of strain-promoted metal-free click chemistry: 1,3-dipolar cycloadditions of phenyl azide and cyclooctynes

Density functional theory (B3LYP) calculations on the transition states for the Huisgen 1,3-dipolar cycloadditions of phenyl azide with acetylene, cyclooctyne, and difluorocyclooctyne are reported. The low activation energy of the cyclooctyne "strain-promoted" cycloaddition (DeltaE = 8.0) compared to the strain-free acetylene cycloaddition (DeltaE = 16.2) is due to decreased distortion energy (DeltaEd) of cyclooctyne (DeltaDeltaEd = 4.6) and phenyl azide (DeltaDeltaEd = 4.5) to achieve that cycloaddition transition state. Electronegative fluorine substituents on cyclooctyne further increase the rate of cycloaddition by increasing interaction energies.     

"Dimers" and "trimers" of tetrahydroindenes and hexahydroazulenes, respectively generated from [2-(1-cycloalkenyl)ethynyl]carbene complexes (M = W, Cr) by cascade cyclization/cycloaddition reactions

A cascade of cyclization/cycloaddition reactions was triggered by addition of protic oxygen nucleophiles ROH 2 (RO = CH3CO2, PhCO2, PhO) to [2-(1-cyclohexenyl)ethynyl]carbene complexes 1b and 1c (M=W, Cr, respectively), affording highly strained "dimers" 11/11' and "trimers" 12 of the carbene ligand. The first reaction step involved the formation of 1-metalla1,3,5-hexatrienes 7, which readily gave tetrahydroindenes 8 by pi cyclization and extrusion of the metal unit. "Dimers" 11/11' were generated from tetrahydroindenes 8 by a highly exo selective [4+2] cycloaddition of compounds 1b and 1c to afford 1-metalla-1,3,5-hexatriene intermediates 9, and a spontaneous pi cyclization of the latter compounds involving the disengagement of the metal unit. Propenylidene cyclohexenes 13/13' were formed in "ene"-type side reactions to the pi cyclization of 1-metalla-1,3,5-hexatrienes 7, by loss of the metal unit. "Dimers" 11 were transformed into "trimers" 12 by a [4+2] cycloaddition and subsequent pi-cyclization of the resulting 1-metalla-1,3,5-hexatriene system. The course of the reaction was elucidated by means of model reactions with (2-phenylethynyl)carbene complex 14, in which 1-metalla-1,3,5-hexatriene intermediates 16 and 17 were isolated and characterized. Alkynyl benzene derivatives 19 were obtained by an unprecedented ring-expansion of a cyclopentadiene unit of "dimers" 11a and 11c, involving the insertion of a carbene carbon atom of compound 14 into a C=C bond. A reaction cascade leading to "dimers" 24/24' could also be triggered by treatment of compounds 2 with [2-(1-cycloheptenyl)ethynyl]carbene tungsten complex 1d.     

Click chemistry methodology in the synthesis of anabasine and cytisine conjugates with isoxazole derivatives

Cytisine and anabasine derivatives containing an acetylenic fragment were used as building blocks in 1,3-dipolar cycloaddition reactions with substituted N-hydroxybenzenecarboximidoyl chlorides, catalyzed by copper(I) salt. The reactions with N-propargylcytisine were not selective, and the products were mixtures of 3,5-disubstituted isoxazoles and small amounts (5–8%) of 3,4-disubstituted isomers. 1,3-Dipolar cycloaddition with N-propargylanabasine afforded 3,5-disubstituted isoxazole derivatives with high regioselectivity.     

Synthesis of 2-ethynylaziridines

2-Ethynyl-substituted aziridines were obtained by the reaction of acetylenic -amino and -azido alcohols with triphenylphosphine and carbon tetrachloride in the presence of triethylamine. The cycloaddition of carbenes and diazomethane to an acetylenic imine was investigated. 2-Ethynylaziridines were obtained in the case of carbonylalkoxycarbenes. The regioselectivity of the cycloaddition of carbenes to an acetylenic imine is demonstrated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 656–661, May, 1982.     

Experimental and theoretical studies of Diels-Alder dimerization of 1,2,3,4,5-pentachlorocyclopentadiene and of Diels-Alder cycloaddition of polychlorinated cyclopentadienes to norbornadiene

Diels-Alder cyclodimerization of 1,2,3,4,5-pentachlorocyclopentadiene (1) affords 2a as the exclusive reaction product. Diels-Alder cycloaddition of 1 to norbornadiene also proceeds stereoselectively to produce a single [4+2] cycloadduct, 4c. The structures of 2a and 4c were established unequivocally via application of single crystal X-ray crystallographic techniques. The origins of the observed diastereofacial selectivity in each of these cycloaddition processes have been investigated by application of semiempirical (AM1 Hamiltonian) and ab initio (Hartree-Fock 3-21G*) calculations. The computational results thereby obtained, which are based upon consideration of the kinetically favored transition state for each of the two cycloaddition reactions studied, are consistent with experiment. These semiempirical and ab initio methods also have been used to investigate the mechanisms of the Diels-Alder reactions that have been used to prepare aldrin and isodrin (7 and 8, respectively). The results thereby obtained suggest that isodrin formation via Diels-Alder cycloaddition of cyclopentadiene to 1,2,3,4,7,7-hexachloronorbornadiene proceeds with kinetic control of product stereochemistry.     

Structures of the phosphinidene germylenoid HP=GeLiF and its cycloaddition reaction with ethylene

The structures of phosphinidene germylenoid HP=GeLiF were studied for the first time by using DFT (density functional theory) calculations. The geometries were optimized at the B3LYP/6-311+G (d, p) level at first and then the single-point energies were calculated at QCISD/6-311++G (d, p) level. Theoretical calculations predicted that HP=GeLiF has two equilibrium structures, the p-complex (1) and the three-membered-ring (2) structures, in which structure 1 has the lower energy and is more stable than 2. To exploit the reactivity of HP=GeLiF, the cycloaddition reaction of 1 and ethylene was investigated at the same level of theory. From the potential energy profile, we predicted that the cycloaddition reaction has one dominant reaction pathway. The calculated result shows that the dominant reaction pathway is a [2?+?2] cycloaddition reaction which is the interaction of two π bonds in HP=GeLiF and ethylene molecule, and a four-membered-ring P-heterocyclic germylene is formed. Since sp³ hybridization of Ge atom in this four-membered-ring germylene, it may further react with another ethylene and finally forming a spiro-Ge-heterocyclic compound involving phosphorus. This means that this reaction involves a [2?+?2] cycloaddition as the initial step, and then a [2?+?1] cycloaddition carried out.     

Cycloadditions with hetaryl dieneamines a direct route to hetarylazulenes

Hetaryl dieneamines readily available from fused N-aryl azolium salts with secondary amines were found to undergo cycloadditions. With N-phenylmaleinimide and acetylene dicarboxylic ester, [4+2] cycloaddition took place to yield tetrahydroisoindolone (2) and phtalic acid (3) derivatives, respectively. Reaction with fulvene reagent4 resulted in a [6+4] cycloaddition followed by a spontaneous elimination and allowed a convenient route to hetaryl azulenes (5–7).     

2-Alkylisoxazolidine-3,3-dicarboxylic acid derivatives

1,3-Dipolar cycloaddition of,-bis(alkoxycarbonyl)-N-alkylnitrones to olefins gave 2-alkylisoxazolidine-3,3-dicarboxylic acid esters, the yields of which are determined by the steric conditions and are virtually independent of the electronic effect of the substituents attached to the C=C bond of the dipolarophiles. The structures of the compounds obtained were established by analysis of the PMR spectra. The retention of the cis configuration of the substituents in the isoxazolidines obtained from maleic acid esters constitutes evidence for a one-step, four-center, concerted cycloaddition mechanism. The energy parameters for inversion of the nitrogen atom of dimethyl 2,5,5-trimethylisoxazolidine-5,5-dicarboxylate were measured.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 599–603, May, 1979.     

Asymmetric synthesis of the four stereoisomers of 5-deoxystrigol

Two approaches to the strigolactone tricyclic lactone skeleton 2 were investigated using ketene/ketene-iminium cycloaddition to olefins. Finally, the first enantioselective access to the four stereoisomers of 5-deoxystrigol 1 is reported using an intramolecular [2+2] cycloaddition of homochiral ketene-iminium salts 5. Very high asymmetric control was achieved with C-2 symmetric pyrrolidines as chiral auxiliary.     

Concerted cycloaddition reactions: a study using the parabolic model and quantum chemical modeling

Concerted cycloaddition reactions were studied by the method of intersecting parabolas (M3IP) and quantum chemical calculations. Experimental data were processed within the framework of the M3IP method and an algorithm for calculating the activation energies (E) and rate constants (k) for reactions from the enthalpies of reactions was developed. The parameters E and k for twelve cycloaddition reactions not studied previously were calculated. Factors affecting the activation energies were established and evaluated; these include the enthalpy of reaction, substituents, and the molecular structure of reactants. Quantum chemical modeling and topological analysis of transition states (TS) of six concerted cycloaddition reactions were performed. Depending on structure of the starting olefins, the TS of reactions can have either a symmetric or asymmetric geometry. This influences their electronic structures, the energies of chemical bonds, and the activation energies of reactions. A comparison of the activation energy values obtained from the M3IP and DFT(B3lyp/6-311++G** ) calculations revealed good agreement between them.     

"Formal" ruthenium-catalyzed [4+2+2] cycloaddition of 1,6-diynes to 1,3-dienes: formation of cyclooctatrienes vs vinylcyclohexadienes

[reaction: see text] A new "formal" Ru-catalyzed [4+2+2] cycloaddition of 1,6-diynes to 1,3-dienes giving conjugated 1,3,5-cyclooctatrienes and vinylcyclohexadienes is described. This formal cycloaddition is really a tandem process, the Ru(II)-catalyzed formation of (Z)-tetraenes or vinyl-(Z)-trienes followed by a pure thermal conrotatory 8 pi- or disrotatory 6 pi-electrocyclization. The proposed mechanism allows the differences in product ratio to be explained in terms of steric and stereochemical considerations.     

利用分子内Click反应合成哌嗪并三唑和哌嗪并四唑化合物

利用分子内的"点击化学"反应合成了三唑和四唑类化合物。在直接加热或金属铜粉催化下加热的条件下,不饱和炔键和氰基与叠氮基发生分子内的成环反应,以较高的收率分别生成哌嗪并三唑化合物和哌嗪并四唑化合物,其结构经NMR,IR和MS表征。     

Synthesis of locked meso-beta-substituted chlorins via 1,3-dipolar cycloaddition

A novel approach toward "locked" chlorins with increased stability has been studied in detail. The chlorin skeleton is assembled in a convergent fashion from two fragments via a porphyrin forming reaction, followed by 1,3-dipolar cycloaddition of azomethine ylides, which are formed in situ. Central to the success of the process is the presence of two electron-withdrawing groups in vicinal positions at the perimeter of the porphyrin. As a result, the 1,3-dipolar cycloaddition took place regioselectively, on the bond activated by two electron-withdrawing groups. Moreover, the chlorins formed are locked and hence more stable because of the presence of two quaternary carbon atoms. Overall, in just six steps locked chlorins were constructed from easily available materials. The large array of functionalities tolerated in this approach validates it for a broad use in more advanced studies. The correlation between the results of the 1,3-dipolar cycloaddition and dipolarophile (porphyrin) LUMO energy was extensively studied. There was a definite correlation between the reaction time and the LUMO energy level, and a partial correlation between the reaction yield and the distribution of the LUMO. Additionally, various approaches toward crucial building blocks, namely 3,4-disubstituted-2,5-diformylpyrroles, were investigated.     

Chemoselective formation of successive triazole linkages in one pot: "click-click" chemistry

A methodology for the successive regiospecific "clicking" together of three components in one pot via two triazole linkages is reported. The protocol utilizes copper(I)-mediated alkyne-azide cycloaddition reactions combined with a silver(I)-catalyzed TMS-alkyne deprotection under mild hydroalcoholic conditions. We exemplify the approach with peptide-based components to illustrate its compatibility with polyfunctionalized biomolecules. The method constitutes a promising tool for peptide ligation. We also provide a procedure for directly using TMS-alkynes as the cycloaddition partner in classical "click" chemistry.     

Synthesis of ethyl 3-phenyl-4-(trifluoromethyl)isoxazole-5-carboxylate via regioselective dipolar cycloaddition

Efforts to prepare ethyl 3-phenyl-4-(trifluoromethyl)isoxazole-5-carboxylate (1) by developing a regioselective 1,3-dipolar cycloaddition between phenyl nitrile oxide and various 4,4,4-trifluoromethyl crotonates are described. The substitution at the C2-position of crotonate dipolarophile 4 significantly influenced the regiochemistry and yield of the cycloaddition. Enol and enol ether-based crotonates underwent regioselective cycloadditions with phenyl nitrile oxide to provide 4-trifluoromethyl isoxazoles in good yields.     

Generation of thiocillin ring size variants by prepeptide gene replacement and in vivo processing by Bacillus cereus

The thiocillins from Bacillus cereus ATCC 14579 are natural products from the broader class of thiazolyl peptides. Their biosynthesis proceeds via extensive post-translational modification of a ribosomally encoded precursor peptide. This post-translational tailoring involves a key step formal cycloaddition between two distal serine residues. In the wild-type structure, this cycloaddition forms a major macrocycle circumscribed by 26-atoms (shortest path). Results presented herein demonstrate the promiscuity of this last step by means of a set of "competition" experiments. Cyclization proceeds in many cases to provide altered ring sizes, giving access to several variant rings sizes that have not previously been observed in nature.     

One-pot multistep synthesis of bipolar carbazolo-phenazines: Hydrogen bond control of Diels-Alder cycloaddition and application for fluoride sensing

Access to novel bipolar carbazolo-phenazines is demonstrated by one-pot IBX-initiated multistep cascade, which involves oxidation of 2-naphthols to 1,2-naphthoquinones, Diels-Alder cycloaddition, aerial dehydroaromatization and cyclocondensation. With unprotected dienic indolylacrylates, NH?O hydrogen bonding in the transition state controls the product selectivity almost exclusively in favor of Diels-Alder cycloaddition over the competing Michael addition. The utility of one of the carbazolo-phenzines as applied to selective naked-eye sensing of fluoride is demonstrated.     

Multicomponent formation route to a new class of oxygen-based 1,3-dipoles and the modular synthesis of furans

A new class of phosphorus-containing 1,3-dipoles can be generated by the multicomponent reaction of aldehydes, acid chlorides and the phosphonite PhP(catechyl). These 1,3-dipoles are formally cyclic tautomers of simple Wittig-type ylides, where the angle strain and moderate nucleophilicity in the catechyl-phosphonite favor their cyclization and also direct 1,3-dipolar cycloaddition to afford single regioisomers of substituted products. Coupling the generation of the dipoles with 1,3-dipolar cycloaddition offers a unique, modular route to furans from combinations of available aldehydes, acid chlorides and alkynes with independent control of all four substituents.

A new class of phosphorus-containing 1,3-dipoles has been developed, which, when coupled with cycloaddition, offers modular synthesis of furans with independent control of all four substituents.