PtFe掺杂石墨烯抗CO中毒性能的理论研究

基于密度泛函理论第一性原理研究了以单空位缺陷(SV)石墨烯为载体的Pt,Fe及PtFe二元金属催化剂的抗CO中毒能力.结果表明,对于单金属原子Pt和Fe,Fe更易吸附在SV石墨烯上;而对于PtFe二元金属催化剂,SV石墨烯对其固定能力明显好于Pt-SV,即Pt催化剂中掺杂Fe大大增加了SV石墨烯对金属催化剂的稳定性.Pt,Fe及PtFe二元金属催化剂抗CO中毒能力的研究结果表明,PtFe-6结构的抗CO中毒能力明显强于Pt-SV,接近于Fe-SV的抗CO中毒能力,在所有二元金属催化剂中PtFe-6的稳定性最好,明显优于Pt在SV石墨烯上的稳定性.通过在Pt中加入非贵金属Fe既可提高DMFC中阳极Pt催化剂的抗CO中毒能力,又可提高其催化活性.     

PtRu/C电催化剂上甲醇吸附氧化过程的电化学原位红外光谱

采用调变的多元醇法制备了高分散的Pt/C, PtRu/C和Ru/C电催化剂. XRD计算结果表明, PtRu/C电催化剂的平均粒径和合金度分别为2.2 nm和71%. 采用电化学方法和原位傅里叶变换红外反射光谱方法(in situ FTIRS)研究了甲醇在3种电催化剂上的吸附氧化过程, 发现PtRu/C对甲醇的催化活性明显高于Pt/C, Ru的加入一方面影响了甲醇在Pt上的解离吸附性能, 另一方面提供了Ru-OH物种, 从而抑制了低电位下电催化剂中毒. 红外光谱研究结果表明, 线性吸附态CO(COL)是主要毒化物种, 反应产物主要是CO2, 还有少量的甲酸甲酯. 根据实验结果讨论了甲醇在PtRu/C电催化剂上的氧化机理.     

Synthesis of PtRu5(CO)14(PBu(t)3)(mu-H)2(mu6-C) and its reactions with Pt(PBut3)2, HGePh3, and HSnPh3

Reaction of PtRu5(CO)15(PBut3)(C), 3, with hydrogen at 97 degrees C yielded the new dihydride-containing cluster compound PtRu5(CO)14(PBut3)(mu-H)2(mu6-C), 5. Compound 5 was characterized crystallographically and was shown to contain an octahedral cluster consisting of one platinum and five ruthenium atoms with a carbido ligand in the center. Two hydrido ligands bridge two oppositely positioned PtRu bonds. Compound 5 reacts with Pt(PBut3)2 to yield Pt2Ru5(CO)14(PBut3)2(mu-H)2(mu6-C), 6, a Pt(PBut3) adduct of 5, by adding a Pt(PBut3) group as a bridge across one of the Ru-Ru bonds in the square base of the Ru5 portion of the cluster. Compound 6 is dynamically active on the NMR time scale by a mechanism that appears to involve a shifting of the Pt(PBut3) group from one Ru-Ru bond to another. Two new complexes, PtRu5(CO)13(PBut3)(mu-H)3(GePh3)(mu5-C), 7, and PtRu5(CO)13(PBut3)(mu-H)2(mu-GePh2)(mu6-C), 8, were obtained from the reaction of 5 with HGePh3. The cluster of 7 has an open structure in which the Pt(PBut3) group bridges an edge of the square base of the square pyramidal Ru5 cluster. Compound 7 also has three bridging hydrido ligands and one terminal GePh3 ligand. When heated to 97 degrees C, 7 is slowly converted to 8 by cleavage of a phenyl group from the GePh3 ligand and elimination of benzene by its combination with one of the hydrido ligands. The PtRu5 metal cluster of 8 has a closed octahedral shape with a GePh2 ligand bridging one of the Ru-Ru bonds. Two tin-containing compounds, PtRu5(CO)13(PBut3)(mu-H)3(SnPh3)(mu5-C), 9, and PtRu5(CO)13(PBut3)(mu-H)2(mu-SnPh2)(mu6-C), 10, which are analogous to 7 and 8 were obtained from the reaction of 5 with HSnPh3.     

PtRu catalysts supported on heteropolyacid and chitosan functionalized carbon nanotubes for methanol oxidation reaction of fuel cells

A simple self-assembly approach has been developed to functionalize carbon nanotubes (CNTs) with chitosan (CS) and heteropolyacids (HPAs) of phosphomolybdic acid (H(3)PMo(12)O(40), HPMo) and phosphotungstic acid (H(3)PW(12)O(40), HPW). The non-covalent functionalization method, which introduces homogenous surface functional groups with no detrimental effect on graphene structures of CNTs, can be carried out at room temperature without the use of corrosive acids. The PtRu nanoparticles supported on HPAs-CS-CNTs have a uniform distribution and much smaller size as compared to those of the PtRu nanoparticles supported on conventional acid treated CNTs (PtRu/AO-CNTs). The onset and peak potentials for CO(ad) oxidation on PtRu/HPAs-CS-CNTs catalysts are more negative than those on PtRu/AO-CNTs, indicating that HPAs facilitate the electro-oxidation of CO. The PtRu/HPMo-CS-CNTs catalyst has a higher electrocatalytic activity for methanol oxidation and higher tolerance toward CO poisoning than PtRu/HPW-CS-CNTs. The better electrocatalytic enhancement of HPMo on the PtRu/HPAs-CS-CNTs catalyst is most likely related to the fact that molybdenum-containing HPAs such as HPMo have more labile terminal oxygen to provide additional active oxygen sites while accelerating the CO and methanol oxidation in a similar way to that of Ru in the PtRu binary alloy system.     

One-pot synthesis of bi-disperse FePt nanoparticles and size-selective self-assembly into AB2, AB5, and AB13 superlattices

By chemically modifying the nucleation burst that generates monodisperse FePt nanocrystals, a mixture of Pt and Fe(x)Pt(1-x) nanoparticles forms during a one-pot reaction that includes a small amount of Cu as a catalyst; size-selective precipitation yields a bi-disperse population of Fe(x)Pt(1-x) nanoparticles, which can assemble into high-quality AB2, AB5, and AB13 superlattice structures.     

Synthesis of PtRu nanoparticles from the hydrosilylation reaction and application as catalyst for direct methanol fuel cell

Nanosized Pt, PtRu, and Ru particles were prepared by a novel process, the hydrosilylation reaction. The hydrosilylation reaction is an effective method of preparation not only for Pt particles but also for other metal colloids, such as Ru. Vulcan XC-72 was selected as catalyst support for Pt, PtRu, and Ru colloids, and TEM investigations showed nanoscale particles and narrow size distribution for both supported and unsupported metals. All Pt and Pt-rich catalysts showed the X-ray diffraction pattern of a face-centered cubic (fcc) crystal structure, whereas the Ru and Ru-rich alloys were more typical of a hexagonal close-packed (hcp) structure. As evidenced by XPS, most Pt and Ru atoms in the nanoparticles were zerovalent, except a trace of oxidation-state metals. The electrooxidation of liquid methanol on these catalysts was investigated at room temperature by cyclic voltammetry and chronoamperometry. The results concluded that some alloy catalysts showed higher catalytic activities and better CO tolerance than the Pt-only catalyst; Pt56Ru44/C have displayed the best electrocatalytic performance among all carbon-supported catalysts.     

Density functional theory study of water activation and COads + OHads reaction on pure platinum and bimetallic platinum/ruthenium nanoclusters

A density functional theory study of the elementary steps that lead to the removal of CO(ads(Pt)) over alloyed and sequentially deposited Pt/Ru bimetallic nanoclusters is presented. The reaction energies and activation barriers for the H2O(ads(Ru)) dissociation and CO(ads(Pt)) + OH(ads(Ru)) reaction are estimated in solid-gas interface and in a microsolvated environment to determine which surface morphology is more tolerant to COads poisoning. On the basis of the energetics, the sequentially deposited Pt/Ru nanocluster is predicted to be a much more promising anode catalyst than the alloy cluster surface in fuel cell applications.     

Composition effects of FePt alloy nanoparticles on the electro-oxidation of formic acid

The catalytic activities of FexPt100-x alloy nanoparticles at different compositions (x=10, 15, 42, 54, 58, and 63) in the electro-oxidation of formic acid have been investigated by using cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance spectroscopy (EIS). It was observed that the electrocatalytic performance was strongly dependent on the FePt particle composition. In chronoamperometric measurements, the alloy particles at x approximately 50 showed the highest steady-state current density among the catalysts under study and maintained the best long-term stability. In addition, on the basis of the anodic peak current density, onset potentials, and the ratios of the anodic peak current density to the cathodic peak current density in CV studies, the catalytic activity for HCOOH oxidation was found to decrease in the order of Fe42Pt58>Fe54Pt46 approximately Fe58Pt42>Fe15Pt85>Fe10Pt90>Fe63Pt37. That is, within the present experimental context, the alloy nanoparticles at x approximately 50 appeared to exhibit the maximum electrocatalytic activity and stability with optimal tolerance to CO poisoning. Consistent responses were also observed in electrochemical impedance spectroscopic measurements. For the alloy nanoparticles that showed excellent tolerance to CO poisoning, the impedance in the Nyquist plots was found to change sign from positive to negative with increasing electrode potential, suggesting that the electron-transfer kinetics evolved from resistive to pseudoinductive and then to inductive characters. However, for the nanoparticles that were heavily poisoned by adsorbed CO species during formic acid oxidation, the impedance was found to be confined to the first quadrant at all electrode potentials. The present work highlights the influence of the molecular composition of Pt-based alloy electrocatalysts on the performance of formic acid electro-oxidation, an important aspect in the design of bimetal electrocatalysts in fuel cell applications.     

Bandgap engineering of monodispersed Cu(2-x)S(y)Se(1-y) nanocrystals through chalcogen ratio and crystal structure

Bandgap engineering is important in light-absorption optimization of nanocrystals (NCs) for applications such as highly efficient solar cells. Herein, a facile one-pot method is developed to synthesize monodispersed ternary alloyed copper sulfide selenide (Cu(2-x)S(y)Se(1-y)) NCs with tunable composition, structure, and morphology. The energy bandgaps can be tuned with the chalcogen ratio, and the crystal structure of the NCs is found to produce an effect on their bandgap and light absorption. The results are significant in bandgap engineering of semiconductor NCs.     

One-pot noninjection synthesis of Cu-doped Zn(x)Cd(1-x)S nanocrystals with emission color tunable over entire visible spectrum

Unlike Mn doped quantum dots (d-dots), the emission color of Cu dopant in Cu d-dots is dependent on the nature, size, and composition of host nanocrystals (NCs). The tunable Cu dopant emission has been achieved via tuning the particle size of host NCs in previous reports. In this paper, for the first time we doped Cu impurity in Zn(x)Cd(1-x)S alloyed NCs and tuned the dopant emission in the whole visible spectrum via variation of the stoichiometric ratio of Zn/Cd precursors in the host Zn(x)Cd(1-x)S alloyed NCs. A facile noninjection and low cost approach for the synthesis of Cu:Zn(x)Cd(1-x)S d-dots was reported. The optical properties and structure of the obtained Cu:Zn(x)Cd(1-x)S d-dots have been characterized by UV-vis spectroscopy, photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The influences of various experimental variables, including Zn/Cd ratio, reaction temperature, and Cu dopant concentration, on the optical properties of Cu dopant emission have been systematically investigated. The as-prepared Cu:Zn(x)Cd(1-x)S d-dots did show PL emission but with quite low quantum yield (QY) (typically below 6%). With the deposition of ZnS shell around the Cu:Zn(x)Cd(1-x)S core NCs, the PL QY increased substantially with a maximum value of 65%. More importantly, the high PL QY can be preserved when the initial oil-soluble d-dots were transferred into aqueous media via ligand replacement by mercaptoundeconic acid. In addition, these d-dots have thermal stability up to 250 °C.     

A novel route for preparation of PtRuMe (Me = Fe,Co, Ni) and their catalytic performance for methanol electrooxidation

PtRuMe (Me = Fe, Co, Ni) catalysts dispersed on multi-wall carbon nanotubes (MWCNTs) were prepared by ultrasonic-assisted chemical reduction. X-ray diffraction (XRD) showed that Pt existed as face-centered cubic structure, while Ru and Me alloyed with Pt. The calculated particle sizes from XRD data are of 3.40, 3.40, 2.61 and 3.06 nm for PtRu, PtRuFe, PtRuCo and PtRuNi, respectively, and are consistent with TEM results. The electrochemical measurements showed that the addition of Me to PtRu enhances the electrocatalytic properties for methanol oxidation and PtRuNi has the best catalytic activity and stability.     

Dynamical intramolecular metal-to-metal ligand exchange of phosphine and thioether ligands in derivatives PtRu5(CO)16(mu6-C)

The complexes PtRu(5)(CO)(15)(PMe(2)Ph)(mu(6)-C) (2), PtRu(5)(CO)(14)(PMe(2)Ph)(2)(mu(6)-C) (3), PtRu(5)(CO)(15)(PMe(3))(mu(6)-C) (4), PtRu(5)(CO)(14)(PMe(3))(2)(mu(6)-C) (5), and PtRu(5)(CO)(15)(Me(2)S)(mu(6)-C) (6) were obtained from the reactions of PtRu(5)(CO)(16)(mu(6)-C) (1) with the appropriate ligand. As determined by NMR spectroscopy, all the new complexes exist in solution as a mixture of isomers. Compounds 2, 3, and 6 were characterized crystallographically. In all three compounds, the six metal atoms are arranged in an octahedral geometry, with a carbido carbon atom in the center. The PMe(2)Ph and Me(2)S ligands are coordinated to the Pt atom in 2 and 6, respectively. In 3, the two PMe(2)Ph ligands are coordinated to Ru atoms. In solution, all the new compounds undergo dynamical intramolecular isomerization by shifting the PMe(2)Ph or Me(2)S ligand back and forth between the Pt and Ru atoms. For compound 2, DeltaH++ = 15.1(3) kcal/mol, DeltaS++ = -7.7(9) cal/(mol.K), and DeltaG(298) = 17.4(6) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 4, DeltaH++ = 14.0(1) kcal/mol, DeltaS++ = -10.7(4) cal/(mol.K), and DeltaG(298) = 17.2(2) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 6, DeltaH++ = 18(1) kcal/mol, DeltaS++ = 21(5) cal/(mol.K) and DeltaG(298) = 12(2) kcal/mol. The shifts of the Me(2)S ligand in 6 are significantly more facile than the shifts for the phosphine ligand in compounds 2-5. This is attributed to a more stable ligand-bridged intermediate for the isomerizations of 6 than that for compounds 2-5. The intermediate for the isomerization of 6 involves a bridging Me(2)S ligand that can use two lone pairs of electrons for coordination to the metal atoms, whereas a tertiary phosphine ligand can use only one lone pair of electrons for bridging coordination.     

Au nanowires with high aspect ratio and atomic shell of Pt-Ru alloy for enhanced methanol oxidation reaction

The methanol oxidation reaction(MOR) is the limiting half-reaction in direct methanol fuel cell(DMFC).Although Pt is the most active single-metal electrocatalyst for MOR,it is hampered by high cost and CO poisoning.Constructing a Pt or Ru monolayer on a second metal substrate by means of galvanic replacement of underpotentially deposited(UPD) Cu monolayer has been shown as an efficient catalyst design strategy for the electrocatalysis of MOR because of the presumed 100% utilization of atoms and resistance to CO poisoning.Herein,we prepared one-dimensional surface-alloyed electrocatalyst from predominantly(111) faceted Au nanowires with high aspect ratio as the substrate of under-potential deposition.The electrocatalyst comprises a core of the Au nanowire and a shell of catalytically active Pt coated by Ru.Coverage-dependent electro-catalytic activity and stability is demonstrated on the Pt/Ru submonolayers on Au wires for MOR.Among all these catalysts,Au@Pt_(ML)@Ru_(ML) exhibits the best electrocatalytic activity and poisoning tolerance to CO.This presents a viable method for the rational catalyst design for achieving high noble-metal utilization efficiency and high catalytic performance.     

阵列纳米管中铂:钌原子比对甲醇电催化氧化活性的影响（英文）

采用电化学沉积技术在3-氨丙基三甲基硅氧烷修饰的多孔氧化铝膜板中制备了具有不同Pt/Ru原子比的双元Pt/Ru阵列纳米管电极（NTAEs）。分别用X-射线衍射和扫描电镜表征了催化剂结构和形态。电化学结果表明：通过控制前驱沉积液的浓度可得到不同PtRu原子比的NTAEs。所制备的Pt 或 Pt/Ru合金阵列纳米电极的真实表面积大,催化活性强,有利于物质传输,对甲醇电氧化显示出显著的催化性能。实验中还系统研究了催化剂组成与CO和CH3OH电催化氧化性能的关系,发现Pt/Ru=50:50的阵列纳米管电极对CO电氧化显示出最好的催化活性;对甲醇电氧化,则Ru原子比为40%的催化剂显示最佳催化性能。     

Structures and catalytic properties of PtRu electrocatalysts prepared via the reduced RuO2 nanorods array

Structures and properties of PtRu electrocatalyts, derived from the aligned RuO2 nanorods (RuO2NR), are investigated using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and cyclic voltammetry toward COads and methanol oxidation. The catalytic activity of methanol oxidation and the CO tolerance are promoted significantly by reducing RuO2 into Ru metal before decorating with Pt. Reduction of RuO2NR was carried out by either thermal decomposition at 650 degrees C in vacuum or H2-reduction at 130 degrees C in low-pressure hydrogen. Reduction assisted by hydrogen allows infiltrating decomposition at low temperature and produces an array of nanorods with rugged walls featuring small Ru nuclei and larger surface area. Pt-RuNR, whose surface Pt:Ru ratio=0.58:0.42 was prepared by decorating with 0.1 mg cm(-2) Pt on the H2-reduced array containing 0.39 mg cm(-2) Ru, demonstrates a favorable combination of CO tolerance and high methanol oxidation activity superior to other RuO2NR-derived catalysts. When compared with a commercial electrocatalyst of PtRu (1:1) alloy (<4 nm), the activity of Pt-RuNR in methanol oxidation is shown to be somewhat lower at potential<0.48 V and higher at potential>or=0.48 V.     

Nanosized (mu12-Pt)Pd164-xPtx(CO)72(PPh3)20 (x approximately 7) containing Pt-centered four-shell 165-atom Pd-Pt core with unprecedented intershell bridging carbonyl ligands: comparative analysis of icosahedral shell-growth patterns with geometrically related Pd145(CO)x(PEt3)30 (x approximately 60) containing capped three-shell Pd145 core

Presented herein are the preparation and crystallographic/microanalytical/magnetic/spectroscopic characterization of the Pt-centered four-shell 165-atom Pd-Pt cluster, (mu(12)-Pt)Pd(164-x)Pt(x)(CO)(72)(PPh(3))(20) (x approximately 7), 1, that replaces the geometrically related capped three-shell icosahedral Pd(145) cluster, Pd(145)(CO)(x)(PEt(3))(30) (x approximately 60), 2, as the largest crystallographically determined discrete transition metal cluster with direct metal-metal bonding. A detailed comparison of their shell-growth patterns gives rise to important stereochemical implications concerning completely unexpected structural dissimilarities as well as similarities and provides new insight concerning possible synthetic approaches for generation of multi-shell metal clusters. 1 was reproducibly prepared in small yields (<10%) from the reaction of Pd(10)(CO)(12)(PPh(3))(6) with Pt(CO)(2)(PPh(3))(2). Its 165-atom metal-core geometry and 20 PPh(3) and 72 CO ligands were established from a low-temperature (100 K) CCD X-ray diffraction study. The well-determined crystal structure is attributed largely to 1 possessing cubic T(h) (2/m3) site symmetry, which is the highest crystallographic subgroup of the noncrystallographic pseudo-icosahedral I(h) (2/m35) symmetry. The "full" four-shell Pd-Pt anatomy of 1 consists of: (a) shell 1 with the centered (mu(12)-Pt) atom encapsulated by the 12-atom icosahedral Pt(x)Pd(12-x) cage, x = 1.2(3); (b) shell 2 with the 42-atom nu(2) icosahedral Pt(x)Pd(42-x) cage, x = 3.5(5); (c) shell 3 with the anti-Mackay 60-atom semi-regular rhombicosidodecahedral Pt(x)Pd(60-x) cage, x = 2.2(6); (d) shell 4 with the 50-atom nu(2) pentagonal dodecahedral Pd(50) cage. The total number of crystallographically estimated Pt atoms, 8 +/- 3, which was obtained from least-squares (Pt(x)/Pd(1-x))-occupancy analysis of the X-ray data that conclusively revealed the central atom to be pure Pt (occupancy factor, x = 1.00(3)), is fortuitously in agreement with that of 7.6(7) found from an X-ray Pt/Pd microanalysis (WDS spectrometer) on three crystals of 1. Our utilization of this site-occupancy (Pt(x)Pd(1-x))-analysis for shells 1-3 originated from the microanalytical results; otherwise, the presumed metal-core composition would have been (mu(12)-Pt)Pd(164). [Alternatively, the (mu(12)-Pt)M(164) core-geometry of 1 may be viewed as a pseudo-Ih Pt-centered six-shell successive nu(1) polyhedral system, each with radially equivalent vertex atoms: Pt@M(12)(icosahedron)@M(30)(icosidodecahedron)@M(12)(icosahedron)@M(60)(rhombicosidodecahedron)@M(30)(icosidodecahedron)@M(20)(pentagonal dodecahedron)]. Completely surprising structural dissimilarities between 1 and 2 are: (1) to date 1 is only reproducibly isolated as a heterometallic Pd-Pt cluster with a central Pt instead of Pd atom; (2) the 50 atoms comprising the outer fourth nu(2) pentagonal dodecahedral shell in 1 are less than the 60 atoms of the inner third shell in 1, in contradistinction to shell-by-shell growth processes in all other known shell-based structures; (3) the 10 fewer PR3 ligands in 1 necessitate larger bulky PPh(3) ligands to protect the Pd-Pt core-geometry; (4) the 72 CO ligands consist of six bridging COs within each of the 12 pentagons in shell 4 that are coordinated to intershell metal atoms. SQUID magnetometry measurements showed a single-crystal sample of 1 to be diamagnetic over the entire temperature range of 10-300 K.     

Studies on State and Structure of Noble Metals in Electrocatalyst Made by Coprecipitation Method

The electrocatalysts of Pt/C,PtRu/C and Ru/C were prepared by the impregnation method.The facet characterization.The dispersion and the particle size for the catalysts were determined by means of X-ray diffraction and transmission electron microscopy,X-ray photoelectron spectroscopy was also used to analyze the state and the valency of the noble metals.The results show that the particle size was in nanometer range and the binary metals have come into being an alloy.The platinum in the catalysts existed in zero valency.The valency of the ruthenium on the surface is different from that in the body,while the ruthenium on the surface existed in oxide-form.PtRu/C and Pt/C are of good activity of the electrooxidation of hydrogen except Ru/C.PtRu/C is more tolerant of CO than Pt/C,and CO is only adsorbed on Pt.     

Soluble precursors for CuInSe2, CuIn(1-x)Ga(x)Se2, and Cu2ZnSn(S,Se)4 based on colloidal nanocrystals and molecular metal chalcogenide surface ligands

We report a new platform for design of soluble precursors for CuInSe(2) (CIS), Cu(In(1-x)Ga(x))Se(2) (CIGS), and Cu(2)ZnSn(S,Se)(4) (CZTS) phases for thin-film potovoltaics. To form these complex phases, we used colloidal nanocrystals (NCs) with metal chalcogenide complexes (MCCs) as surface ligands. The MCC ligands both provided colloidal stability and represented essential components of target phase. To obtain soluble precursors for CuInSe(2), we used Cu(2-x)Se NCs capped with In(2)Se(4)(2-) MCC surface ligands or CuInSe(2) NCs capped with {In(2)Cu(2)Se(4)S(3)}(3-) MCCs. A mixture of Cu(2-x)Se and ZnS NCs, both capped with Sn(2)S(6)(4-) or Sn(2)Se(6)(4-) ligands was used for solution deposition of CZTS films. Upon thermal annealing, the inorganic ligands reacted with NC cores forming well-crystallized pure ternary and quaternary phases. Solution-processed CIS and CZTS films featured large grain size and high phase purity, confirming the prospects of this approach for practical applications.     

CO_xM_(4—x)异金属四面体簇羰基化合物的量子化学研究

本文对十个CO_xM_(4-x)异金属四面体簇合物体系进行了量化计算(DV-X_a方法)。结果表明:CO_xM_(4-x)异金属簇与Co_4四面体簇化学键相似,但其他金属(M)的引入,使四面体簇价带收缩,Co的3d能级展宽,体系费米能级升高。在Co与Fe、Ru等ⅦB族元素形成的双金属簇中,Co在簇中所占比例愈大,贡献的电荷就愈多;而在Co与Mo、W等ⅥB族元素形成的四面体簇中,Mo、W为电荷主要提供者。     

Dinuclear ruthenium and iron complexes containing palladium and platinum with tri-tert-butylphosphine ligands: synthesis, structures, and bonding

The reaction of Pd(PBu(t)(3))(2) with Ru(CO)(5) yielded the dipalladium-diruthenium cluster complex Ru(2)(CO)(9)[Pd(PBu(t)(3))](2), 10. The reaction of Pt(PBu(t)(3))(2) with Ru(CO)(5) at room temperature afforded the diplatinum-diruthenium cluster complex Ru(2)(CO)(9)[Pt(PBu(t)(3))](2), 12, and the monoplatinum-diruthenium cluster PtRu(2)(CO)(9)(PBu(t)(3)), 11. All three complexes contain a diruthenium group with bridging Pd(PBu(t)(3)) or Pt(PBu(t)(3)) groups. Compound 11 can be converted to 12 by reaction with an additional quantity of Pt(PBu(t)(3))(2). The reaction of 12 with hydrogen at 68 degrees C yielded the dihydrido complex Pt(2)Ru(2)(CO)(8)(PBu(t)(3))(2)(micro-H)(2), 13. This complex contains a Ru(2)Pt(2) cluster with hydride ligands bridging two of the Ru-Pt bonds. The reaction of Fe(2)(CO)(9) with Pt(PBu(t)(3))(2) yielded the platinum-diiron cluster complex PtFe(2)(CO)(9)(PBu(t)(3)), 14, which is analogous to 11. All new complexes were characterized crystallographically. Molecular orbital calculations of 10 reveal an unusual delocalized metal-metal bonding system involving the Pd(PBu(t)(3)) groups and the Ru(2)(CO)(9) group.