Synthesis and characterization of tin(IV) antimonate and study of its ion-exchange equilibria

Tin(IV) antimonate with different Sb/Sn molar ratios has been prepared. The characterization of the product materials was carried out using X-ray diffraction pattern, themal analysis and infrared spectra. The saturation capacities of sodium and cesium were found to increase with Sb/Sn molar ratios. TheK _d values on thermal treatment of tin(IV) antimonate, as a cation exchanger, have been measured for some heavy metal ions in the temperature range of 50–400 °C. The maximum adsorption of 10^–4M of the metal ions studied was obtained at 400 °C. The selectivity sequence was Eu³⁺>Co²⁺>Sr²⁺>Cs⁺ for the sample heated up to 400 °C. No adsorption was observed on the sample heated at 700 °C because of the formation of SnO₂ and Sb₆O₁₃.     

Removal of Some Radionuclides Using Stannic Silicovanadate as Inorganic Ion Exchanger

Adsorption of cesium (Cs⁺), strontium (Sr²⁺), and europium (Eu³⁺) onto stannic silico vanadate as ion exchange material, and the effects of experimental conditions on adsorption were considered. The material were characterized by X-ray diffractometer system (XRD), scanning electron microscopy (SEM), X-ray fluorescence spectrometry (XRF), infrared (IR), and thermal analysis (TGA and DTA). The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity. The thermodynamic parameters such as ΔG*, ΔS*, and ΔH* have also been calculated for the adsorption of Cs⁺, Sr²⁺, and Eu³⁺ onto stanic silicovanadate, showing that the overall adsorption process is spontaneous and endothermic.     

Extraction of actinides and fission products from salt solutions using polyethylene glycols (PEGs)

The extraction behavior of several metal ions viz., Am³⁺, Eu³⁺, UO₂ ²⁺, Th⁴⁺, Sr²⁺ and Cs⁺ was investigated from sulphate medium employing phosphotungstic acid (PTA) and polyethylene glycol (PEG). The influence of various parameters such as pH, PTA concentration, PEG concentration and salt concentration was studied. The order of extraction followed the trend: Am³⁺>Eu³⁺>>Th⁴⁺>UO₂ ²⁺>Sr²⁺>Cs⁺ which deviate significantly from the reported order with conventional solvents. The relatively poor extraction of UO₂ ²⁺, Sr²⁺ and Cs⁺ was ascribed to their lack of interaction with the phosphotungstate anion. The separation behaviour of Am³⁺ vis-a-vis Eu³⁺ was also investigated under different experimental conditions.     

Kinetic aspects of the ion-exchange reactions of Cs<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, Sr<Superscript>2+</Superscript>and Eu<Superscript>2+</Superscript> ions on the H<Superscript>+</Superscript> form of chromium hexacyanoferrate(II)

Summary This paper reports the radiochemical study of the ion-exchange of Cs⁺, Na⁺, Sr²⁺ and Eu³⁺ ions with H⁺ by chromium hexacyanoferrate(II) which was prepared in a granular form using a gel method. The slow steps which determine the rate of exchange of these ions are directly proportional to the particle diameter and this is confirmed from the linearity test of Bt vs. t plots at different particle diameters. Boyed’s equation and Reichenberg’s tables were used for evaluating all the kinetic parameters. The results reveal that the effective particle radii are unchanged for both chromium hexacyanoferrate(II) dried at 60 and 120 °C. The obtained data were analyzed using McKay plots and Arrhenius equation and the kinetic and thermodynamic parameters, e.g., effective diffusion coefficient, activation energies and entropies of activation have been evaluated. The mobility of these ions inside the particles of chromium hexacyanoferrate(II) decrease in the order of Eu³⁺>Sr²⁺>Na⁺⊃Cs⁺.     

Selective ion exchange onto Slovakian natural zeolites in aqueous solutions

Ion exchange isotherms have been measured and plotted for the uptake of cesium, barium, cobalt, zinc, silver and amonium onto clinoptilolite- and mordenite-rich tuffs of Slovakian origin selectively for both the natural and near homoionic Na form as well, using the radioanalytical determination. The higher quality clinoptilolite-rich tuff has been proven to be effective for a potential radionucleides removal in native form according to the following selectivity sequence: Ag⁺,Ba²,Cs⁺>NH₄ ⁺>Co²⁺, while parent tuff in Na exchanged variety exhibited a little different sequence according to: Ag⁺?>?NH₄ ⁺?>?Ba²⁺?>?Cs⁺. The raw and Na exchanged mordenite-rich tuffs proved subsequently more or less similar selectivity : Ag⁺?>?Zn²⁺?>?Cs⁺, Ba²⁺?>?Co²⁺ and Ag⁺?>?Zn²⁺.     

Preparation of hybrid ion exchanger based on acrylamide for sorption of some toxic metal ions from aqueous waste solutions

Crystalline phases of polyacrylamide titanium tungstophosphate composite material has been synthesized via sol–gel method. The properties of its were determined using different technique. The ion-exchange capacities of the hybrid material for Cs⁺, Co²⁺ and Eu³⁺ ions it was found that 6.22, 2.76 and 1.38 mequiv. g^–1 respectively. The material was found that highly selective for Eu³⁺ and the selectivity sequence for sorption of Cs⁺, Co²⁺ and Eu³⁺ ions on polyacrylamide titanium tungstophosphate was found that; Eu³⁺ > Cs⁺ > Co²⁺. Thermodynamic parameters have been calculated for the studied ions showing that the overall adsorption process is spontaneous and endothermic. The experimental isotherm data were analyzed using the Langmuir and Freundlich models.     

Coordination of Actinide Single Ions to Deformed Graphdiyne: Strategy on Essential Separation Processes in Nuclear Fuel Cycle

The coordination of actinides and lanthanides, as well as strontium and cesium with graphdiyne (GDY) was studied experimentally and theoretically. On the basis of experimental results and/or theoretical calculations, it was suggested that Th⁴⁺, Pu⁴⁺, Am³⁺, Cm³⁺, and Cs⁺ exist in single‐ion states on the special triangular structure of GDY with various coordination patterns, wherein GDY itself is deformed in different ways. Both experiment and theoretical calculations strongly indicate that UO₂²⁺, La³⁺, Eu³⁺, Tm³⁺ and Sr²⁺ are not adsorbed by GDY at all. The distinguished adsorption behaviors of GDY afford an important strategy for highly selective separation of actinides and lanthanides, Th⁴⁺ and UO₂²⁺, and Cs⁺ and Sr²⁺, in the nuclear fuel cycle. Also, the present work sheds light on an approach to explore the unique functions and physicochemical properties of actinides in single‐ion states.     

Factors affecting the sorption behavior of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> using biosorbent material

In this study, saw dust has been used as precursor for production of low cost activated carbon using potassium hydroxide (KOH) and steam activation technique. The activated carbon was used to remove Cs⁺ and Sr²⁺ ions from aqueous solutions by batch operation, and the extent of adsorption was investigated as a function of solution pH, temperature, shaking time, and initial concentration. The influence of interfering ions was also investigated. The removal of metal ions was pH dependent and the adsorption capacity reaches its maximum 43% and 61.5% at pH 5.0 and 6.0 for Cs⁺ and Sr²⁺ ions, respectively. Thermodynamic studies showed different behaviours where an endothermic, non-spontaneous process was shown for Cs⁺ while an exothermic, spontaneous process was obtained for Sr²⁺. The kinetic data of both ions was described well by pseudo-second order rate equation. The two equilibrium models (Langmuir and Freundlich) have been also applied. Desorption studies indicated that HCl was the most effective desorbing eluent. The investigated adsorbent showed good results towards cesium and strontium removal from aqueous media that could be a promising method due to its low-cost and good efficiency.     

Selectivity for Cs and Sr in Nb-substituted titanosilicate with sitinakite topology

The 25% niobium substituted crystalline titanosilicate with the composition Na_1.5Nb_0.5Ti_1.5O₃SiO₄·2H₂O (Nb-TS) was synthesized under hydrothermal conditions. Its selectivity for radioactive ¹³⁷Cs and ⁸⁹Sr was compared with the TS, Na₂Ti₂O₃SiO₄·2H₂O, having sitinakite topology. The Nb-TS shows significantly higher uptake value for ¹³⁷Cs but lower for ⁸⁹Sr than the TS. To investigate the origin of selectivity, the ion exchanged Cs⁺ and Sr²⁺ forms with the composition, Cs_xNaH_yNb_0.5Ti_1.5O₃SiO₄·zH₂O (x=0.1, 0.2 and 0.3, x+y=0.5 and z=1-2) and Sr_0.2Na_0.6H_0.5Nb_0.5Ti_1.5O₃SiO₄·H₂O, respectively, were structurally characterized from the X-ray powder diffraction data using the Rietveld refinement technique. Simultaneously the kinetics of ¹³⁷Cs and ⁸⁹Sr uptake was investigated for the Nb^V free and doped samples. While the Cs⁺ and Sr²⁺ exchanged form of Nb-TS and the Cs⁺ exchanged form of TS retain the symmetry of the parent compound, the Sr²⁺ exchanged form of TS undergoes a symmetry change. The differences in the uptake of Cs⁺ and Sr²⁺ result from the different coordination environments of cesium and strontium in the eight-ring channel, that result from various hydration sites in the tunnel. The origin of selectivity appears to arise from the higher coordination number of cesium or strontium. Other effects due to Nb^V substitution are reflected in the increase of both, the a- and c-dimensions and thus the unit cell volume, and the population of water vs. Na⁺ in the channel to charge-balance the Nb⁵⁺↔Ti⁴⁺ substitution.     

Thermodynamic modeling for the removal of Cs+, Sr2+, Ca2+and Mg2+ions from aqueous waste solutions using zeolite A</p> </p>

Summary The batch removal ofCs⁺, Sr²⁺, Ca²⁺and Mg²⁺ions from aqueous solutions using synthetic zeolite A was investigated. The influence of the initial ion concentration, pH and temperature was studied. The obtained isotherm data have been correlated with Langumir, Freundlich, and Dubinin-Radushkevich(D-R) isotherm models. The effect of the temperature on the equilibrium distribution values has been utilized to evaluate the standard thermodynamic parameters such as free energy (DG), enthalpy (DH) and entropy (DS). Based on the D-R isotherm expression, the maximum ion-exchange capacity and the mean free energy of each studied ion has been determined. The selectivity sequence, deduced from the equilibrium isotherm data is: Sr²⁺>Ca²⁺>Mg²⁺>Cs⁺>Na⁺.</p> </p>     

Spectrophotometric studies of alkali and alkali earth metal ions complexes of mono amino derivative of calix[4]arene

The synthesis and complexive abilities of 5,11,17-tris(tert-butyl)-23 amino-25,26,27,28-tetra-propoxycalix[4]arene towards alkali cations Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and alkali earth cations Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ in methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex with all the cations by 1: 1 metal to ligand ratios. The selectivity presented considering the calculated formation constants are in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ and Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ with the ligand.     

Selective adsorption of europium/III/ and americium/III/ in non-proliferative mycobacterial suspensions

The absorption effect of 5% w/w non-proliferative cell suspensions of Mycobacterium smegmatis on labelled solutions of Eu³⁺ ions, both alone and in admixtures with Am³⁺, Co²⁺ and Cs⁺, was studied at pH 1.0 as a function of time and cationic concentration. For 10 M concentrations of Eu, Co and Cs, selective adsorption of the trivalent lanthanide and actinide ions was practically quantitative after 90 min; no significant adsorption was observed for cobalt and cesium ions. Column adsorption measurements with the mycobacterial biomass showed that desorption of the M³⁺ ions did not occur at less than 2M HCl and remained incomplete even at higher acidities.     

Cation exchange, interlayer spacing, and thermal analysis of Na/Ca-montmorillonite modified with alkaline and alkaline earth metal ions

Na-montmorillonites were exchanged with Li⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺, while Ca-montmorillonites were treated with alkaline and alkaline earth ions except for Ra²⁺ and Ca²⁺. Montmorillonites with interlayer cations Li⁺ or Na⁺ have remarkable swelling capacity and keep excellent stability. It is shown that metal ions represent different exchange ability as follows: Cs⁺?>?Rb⁺?>?K⁺?>?Na⁺?>?Li⁺ and Ba²⁺?>?Sr²⁺?>?Ca²⁺?>?Mg²⁺. The cation exchange capacity with single ion exchange capacity illustrates that Mg²⁺ and Ca²⁺ do not only take part in cation exchange but also produce physical adsorption on the montmorillonite. Although interlayer spacing d ₀₀₁ depends on both radius and hydration radius of interlayer cations, the latter one plays a decisive role in changing d ₀₀₁ value. Three stages of temperature intervals of dehydration are observed from the TG/DSC curves: the release of surface water adsorbed (36?C84?°C), the dehydration of interlayer water and the chemical-adsorption water (47?C189?°C) and dehydration of bound water of interlayer metal cation (108?C268?°C). Data show that the quantity and hydration energy of ions adsorbed on montmorillonite influence the water content in montmorillonite. Mg²⁺-modified Na-montmorillonite which absorbs the most quantity of ions with the highest hydration energy has the maximum water content up to 8.84%.     

Diffusion mobility of alkali metals in perfluorinated sulfocationic and carboxylic membranes as probed by <Superscript>1</Superscript>H, <Superscript>7</Superscript>Li, <Superscript>23</Superscript>Na,and <Superscript>133</Superscript>Cs NMR spectroscopy

Water self-diffusion and ion mobilities in various ionic forms (H⁺, Li⁺, Na⁺, Rb⁺, Cs⁺, and Ba²⁺) of perfluorinated sulfocationic membranes MF-4SK were studied by NMR and impedance spectroscopy. When degrees of hydration are low, the self-diffusion coefficients of water and ionic conductivities are considerably affected by the water content of the membrane. The self-diffusion coefficients decrease in the order H⁺ > Ba²⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺, whereas the ion mobility decreases in the order H⁺ > Li⁺ > Na⁺ > Cs⁺ > Ba²⁺.     

Distribution studies of metal ions on arsenophosphates of Sn(IV) and Cr(III) and on amine Sn(II) hexacyanoferrates (II) using radio tracers: Separation of Sr2+−Cs+, Hg2+−Ag+ and Hg2+−Zn2+

Summary Distribution studies of some metal ions have been made on Sn(IV) and Cr(III) arsenophosphates and on some samples of Sn(II) amine hexacyanoferrates(II), using radiotracers. The K_d values of Cs⁺ and Rb⁺ have been followed at varying HNO₃ concentrations also. As a result 3 useful binary separations have been achieved on Sn(IV) and Cr(III) arsenophosphates, such as Sr²⁺–Cs⁺, Hg²⁺–Ag⁺ and Hg²⁺–Zn²⁺.     

Water self-diffusion and ionic conductivity in perfluorinated sulfocationic membranes MF-4SK

Water self-diffusion and ion mobilities in various ionic forms (H⁺, Li⁺, Na⁺, Rb⁺, Cs⁺, and Ba²⁺) of perfluorinated sulfocationic membranes MF-4SK were studied by NMR and impedance spectroscopy. When degrees of hydration are low, the self-diffusion coefficients of water and ionic conductivities are considerably affected by the water content of the membrane. The self-diffusion coefficients decrease in the order H⁺ > Ba²⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺, whereas the ion mobility decreases in the order H⁺ > Li⁺ > Na⁺ > Cs⁺ > Ba²⁺.     

Affinity and removal of radionuclides mixture from low-level liquid waste by synthetic ferrierites

The affinity and removal efficiency of ¹³⁷Cs⁺, ¹³³Ba²⁺, ⁸⁵Sr²⁺ and ²⁴¹Am³⁺ mixture from aqueous solutions using two synthetic ferrierites HSZ 700KOA and 700KOD commercially used as a catalyst in oil industry were investigated. The uptake of metal ions as a function of different parameters has been studied using batch equilibrium technique. Kinetic curves showed that the equilibrium was mostly reached within 45 min for Cs⁺ and Ba²⁺ and revealed to be longer for Sr²⁺ and Am³⁺. Using Freundlich and Langmuir adsorption isotherms, the results showed that the affinity and adsorption capacity of 700KOA and 700KOD follow the order: Cs⁺ > Ba²⁺ > Sr²⁺ > Am³⁺ with higher values for first material. Both adsorbents exhibited significant high capacity for Cs⁺ relative to other cations giving q _max 1.97 and 1.78 mmol g⁻¹ for 700KOA and 700KOD, respectively. All metals uptake found to be concentration dependant and independent of the pH over 2 to 10 range except Am³⁺; this reveals that the adsorption mechanism is controlled mainly by pure ion exchange reaction for Cs⁺, Ba²⁺, Sr²⁺ and by surface complexation mechanism for Am³⁺. These simple nontoxic materials are recommended to be used for radioactive waste treatment especially fission product ¹³⁷Cs and activation product ¹³³Ba.     

Pore-functionalized polymer membranes for preconcentration of heavy metal ions

Functionalized membranes containing carboxylate, phosphate and sulfonate groups were prepared by UV-initiator induced graft polymerization of the functional monomer (acrylic acid, ethylene glycol methacrylate phosphate (EGMP) and 2-acrylamido-2-methyl-1-propane sulfonic acid) with a crosslinker (methylenebisacrylamide) in the pores of poly(propylene) host membranes. The functionalized membranes thus obtained were characterized by gravimetry, FTIR spectroscopy, radiotracers and scanning electron microscopy for the degree of grafting and water uptake, presence of functional groups, ion-exchange capacity, and physical structure of the membranes, respectively. The uptakes of Cs⁺, Ag⁺, Sr²⁺, Cd²⁺, Hg²⁺, Zn²⁺, Eu³⁺, Am³⁺, Hf⁴⁺ and Pu⁴⁺ ions in the functionalized membranes were studied as a function of acidity of the equilibrating aqueous solution. Among the functionalized membranes prepared in the present work, the EGMP-grafted membrane (with phosphate groups) showed acid concentration dependent selectivity towards multivalent metal ions like Eu³⁺, Am³⁺, Hf⁴⁺ and Pu⁴⁺. The solvent extraction studies of EGMP monomer in methyl isobutyl ketone (MIBK) solvent indicated that divalent and trivalent metal ions form complexes with EGMP in 1:2 proportion, but the distribution coefficients of trivalent metal ions were significantly higher that for the divalent ions. The uptakes of Eu³⁺ ions in monomeric EGMP (dissolved in MIBK) and polymeric EGMP (in the forms of crosslinked gel and membrane) were studied as a function of concentration of H⁺ ions in the equilibrating solution. This study indicated that polymeric EGMP has better binding ability towards Eu³⁺ as compared to monomeric EGMP. The variation of distribution coefficients of Eu³⁺/Am³⁺ in gel and membrane as a function of H⁺ ion concentration in the equilibrating aqueous solution indicated that ionic species held in the membrane and gel were not same. These results indicated that proximity of functional groups (phosphate) plays an important role in metal ion binding with polymeric EGMP.     

Chromium antimonate as an ion-exchanger

Summary Chromium antimonate has been synthesised under varying conditions of precipitation and the cation-exchange properties of the various samples are reported. Systematic study has resulted in a product suitable for column operations. The effect of equilibration time, concentration of the electrolyte, size and charge of the ion and drying temperature on exchange capacity is reported. The chemical stability and regeneration power of the sample are also investigated. The plots of log K_d against pH for Rb⁺, Cs⁺, Tl⁺, Ca²⁺, Zn²⁺, and Tl³⁺ ions suggest a predominently ion-exchange mechanism in the case of Rb⁺ and Cs⁺ ions. K_d values of 27 metal ions have been determined and some chromatographic separations of analytical and radiochemical importance based on them have been achieved on chromium antimonate columns.Presented at the Annual Convention of Chemists (India), Roorkee, December 1975.     

Separation of strontium from simulated waste in K2SO4/Nitrate medium containing Sr2+, Eu3+, Ce3+, Pd2+, Rh3+, Ru3+, UO 2 2+ , Fe3+, Cr3+, Ni2+, Al3+, Ca2+ and Cs+, by strongly basic anion exchanger

In this work Strontium was separated selectively form, Pd²⁺, Ni²⁺ and Ca³⁺ using anionic resins of Amberlite type IRA-900 and IRA-410 from nitrate medium. The Separation of strontium by strongly basic anion exchangers IRA-410 and IRA-900 from simulated waste containing, Sr²⁺, Eu³⁺, Ce³⁺, Pd²⁺, Rh³⁺, Ru³⁺, VO₂ ²⁺, Fe³⁺, Cr³⁺, Ni²⁺, Al³⁺, Ca²⁺, and Cs⁺, in K₂SO₄/nitrate medium which adsorbed as strontium sulphate complex was achieved through ligand- ligan exchange. The elution of strontium carried out via “loading” the column with a solution of 0.03N EDTA in presence of 0.1N NaNO₃ at pH7 where Sr²⁺ has low K_d value. An inductively Coubled Plasma — Optical Emission Spectrometry (ICP — OES) of ARL type model 3520, was used for elemental analysis.