Synthesis,spectral characterization,and evaluation of antimicrobial activity of O,O′-alkanediyl S-(N-phthalimidomethyl) dithiophosphates and zinc bis(O,O′-alkanediyl) dithiophosphates

The synthesis of novel dithiophosphate derivatives has been achieved. Two O,O′-alkanediyl S-(N-phthalimidomethyl) dithiophosphates and two Zinc bis(O,O′-alkanediyl) dithiophosphates are synthesized by an easy and facile chemical synthetic route. Zinc bis[O,O′-(2-methylpentane-2,4-diyl) dithiophosphate] L¹, Zinc bis[O,O′-(2-ethylhexane-1,3-diyl) dithiophosphate] L², O,O′-(2-methylpentane-2,4-diyl) S-(N-phthalimidomethyl) dithiophosphate L³ and O,O′-(2-ethylhexane-1,3-diyl) S-(N-phthalimidomethyl) dithiophosphate L⁴ are synthesized from the respective ammonium salts. Compounds L¹, L², L³, and L⁴ are characterized by (CHN) elemental analysis, ESI mass, FT-IR, ¹H, ¹³C, and ³¹P NMR techniques. The crystal structure of ammonium O,O′-(2-methylpentane-2,4-diyl) dithiophosphate is discussed. L¹, L², L³, and L⁴ were evaluated for antimicrobial activity. It was found that the phthalimide derivatives L³ and L⁴ showed much better antifungal potential against some species of fungus. The Zinc dithiophosphates L¹ and L² showed good antibacterial activity against Bacillus cereus and Escherichia coli.     

Trichloro- and triisopropoxy-niobium(V) and tantalum(V) bis -( O,O ′-alkylene dithiophosphates): synthesis and characterization

Trichloro- and triisopropoxy-niobium(V) and tantalum(V) alkylene dithiophosphates, (M = Nb(V) or Ta(V); G =–CHMeCHMe–,–CMe₂CMe₂–,–CH₂CMe₂CH₂–,–CH₂CEt₂CH₂–or–CMe₂CH₂CHMe–and X = Cl or OPrⁱ) have been synthesized by reaction of metal(V) chloride, MCl₅, or triisopropoxymetal(V) dichloride, (PrⁱO)₃MCl₂, with the sodium salts of O,O′-alkylene dithiophosphoric acids, in 1 : 2 molar ratio in THF under anhydrous conditions. These pink-purple or light-yellow compounds are viscous, semi-solid or solid, hydrolyzable and soluble in common organic solvents. These compounds have been characterized by elemental analyses, molecular weight determinations and spectral studies like IR and heteronuclear NMR (¹H, ¹³C and ³¹P), which indicated a bidentate mode of chelation of dithio ligands, leading to a pentagonal bipyramidal geometry around the niobium(V) or tantalum(V) centers.     

Synthesis and Characterization of Chlorobis(cyclopentadienyl) Titanium(IV) and Zirconium(IV) O,O’-Dialkyl and Alkylene Dithiophosphates

Abstract

Reactions of O,O′-dialkyl and alkylene dithiophosphoric acids with bis (cyclopentadienyl) titanium(IV) and zirconium (IV) dichloride in a 1:1 molar ratio in refluxing benzene proceeds with elimination of HCl and formation of the substituted derivatives, Cp₂MCl[S₂P(OR)₂] (where R = Et, Pr-n, Pr-i, Bu-i and Ph), Cp₂MCl[S₂POGO] (where G = ?CH₂CMe₂CH₂?, ?CH₂CEt₂CH₂? and ?CMe₂CMe₂?), (M = Ti and Zr). The complexes are dark red and yellow solids, soluble in common organic solvents and monomeric in nature. These have been characterized on the basis of elemental analyses, molecular weight determinations, IR, and NMR (¹H, ¹³C, and ³¹P).

GRAPHICAL ABSTRACT      

Preparation and characterization of organogermanium O,O′-dimethyl and diethyl-dithiophosphates

Organogermanium derivatives of dithiophosphoric acid of general formula R₄−_nGe[SP(S)(OR′)₂]_n, where n = 1–3, R, = Me, Ph and R′ = Me, Et, have been prepared and characterized by means of ¹H, ¹³C NMR and vibrational spectroscopy and mass spectrometry. The spectroscopic results indicate that the dithiophosphate groups are monodenate and that an approximate tetrahedral geometry about the germanium atom is maintained. This is in part confirmed by a preliminary X-ray crystallographic determination of PhGe[SP(S)(OMe)₂]₃, whose crystals are orthorhombic, space group Pn2₂₁a, a 13.674(4), b 14.566(3), c 13.154(3) Å, V 26201(1) ų and Z = 4 from 1225 observed reflections [1 > 2σI].     

Oxomolybdenum(VI) complexes with glycine bisphenol [O,N,O,O′] ligand: synthesis and catalytic studies

The oxomolybdenum(VI) complex [MoOCl(L)] with a tetradentate glycine bisphenol ligand (H₃L) was prepared by reaction of [MoO₂Cl₂(DMSO)₂] with a ligand precursor in hot toluene. The product was isolated in moderate yield as separable cis and trans isomers along with the third minor component, [MoO₂(HL)]. The solid-state structure of trans-[MoOCl(L)] was determined by X-ray diffraction. The ligand has tetradentate coordination through three oxygens and one nitrogen, which is located trans to the terminal oxo whereas the sixth coordination site is occupied by a chloride. Both cis and trans isomers of [MoOCl(L)] are active catalysts for epoxidation of cis-cyclooctene and sulfoxidation of tolyl methyl sulfide. The cis isomer gave higher activity in epoxidation and sulfoxidation reactions at room temperature than the trans isomer but they performed identically at 50?°C.     

Syntheses and crystal structures of (18-crown-6)bis(perchlorato-O,O′)strontium and (18-crown-6)bis(perchlorato-O,O′)barium

Two complexes, namely, (18-crown-6)bis(perchlorato-O,O′)strontium (I) and (18-crown-6)bis(perchlorato-O,O′)barium (II), are synthesized. Their crystal structures are determined by X-ray diffraction analysis. The structures of I (space group P2₁/c, a = 15.266 Å, b = 11.080 Å, c = 13.235 Å, β = 109.20°, Z = 4) and II (space group P2₁/n, a = 8.330 Å, b = 11.202 Å, c = 11.752 Å, β = 98.38°, Z = 2) are solved by a direct method and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.077 (I) and 0.041 (II) against 3714 (I) and 2478 (II) independent reflections (CAD-4 diffractometer, λMoK _α radiation). Complex molecules [Sr(18C6)(ClO₄)₂] in the structure of I and [Ba(18C6)(ClO₄)₂] in II (in the inversion center)—are of the host-guest type. The Sr²⁺ or Ba²⁺ cation is localized in the center of a cavity of the 18-crown-6 ligand and coordinated by its all six O atoms. In compounds I and II, the coordination polyhedron of the Sr²⁺ and Ba²⁺ cations (coordination number 10) can be described as a distorted hexagonal bipyramid with two bifurcated vertices at two O atoms of two ClO ₄ ^? ligands, which are disordered in I and II and each of them has two orientations.     

O,O′-Alkylene dithiophosphate derivatives of iron(II) and iron(III) and their reactions with nitrogen- and phosphorus-donor bases

Summary Solids of the stoichiometric formulae [Fe{S₂P(OPr-n)₂}₃] and [Fe{S₂PO₂G}₃] (G = —CH₂CMe₂CH₂—, CMe_2–CMe₂— or —CH₂CH₂CHMe—) are precipitated from the reactions of FeCl₃ with ammonium dithiophosphates in water. Soluble complexes of the type [Fe{S₂PO₂G}₂], formed by the reactions of FeCl₂ with NH₄[{S₂PO₂G}] in MeOH, can be extracted with benzene. Adducts of the types [Fe{S₂PO₂G}₂L] and [Fe{S₂PO₂G}₂(PPh₃)₂] are formed by the reaction of [Fe{S₂PO₂G}₂] with L (L = 2,2-bipyridyl or 1,10-phenanthroline) and PPh₃, respectively. All the compounds have been characterized by i.r. and u.v.-vis. spectroscopy and magnetic studies.This paper is dedicated to the late Dr. G. Srivastava, Associate Professor, Department of Chemistry, Rajasthan University, Jaipur.     

Bis(μ3-barbiturato−O,O,O′)-(μ2-aqua)- aqua-barium(II): crystal structure,spectroscopic and thermal properties

A polymeric coordination compound, [Ba(H₂O) ₂(Hba)₂] (1) (H₂ba – barbituric acid, C₄H₄N₂O₃), was obtained. The structure of 1 was solved using powder X-ray diffraction methods. The Ba²⁺ ion in 1 formed a three-capped trigonal prism. The BaO₉ polyhedra, connected with each other by the edges and faces, formed a chain. Several 4- and 12-membered cycles due to the bridging μ₂-H₂O and bridging μ₃-Hba^– also formed implementing a 3-D polymer structure. The structures of 1 and other thiobarbiturate complexes were compared. The replacement of a S atom by an O atom in the heterocyclic ligand Htba^? (thiobarbiturate ion) of the compound Ba(H₂O)₂(Htba)₂ resulted in changes of the coordination number Ba(II) and supramolecular structure. The intermolecular hydrogen bonds O–H?O and N–H?O formed a 3-D net where pronounced 2-D layers of Hba^– ions could be found. A new topological net in 1 was observed. The IR and thermal stability were investigated.     

Synthesis and crystal structure (1,10-diaza-18-crown-6-N,N′,O,O′)dichloromanganese(II)

A new crystalline complex (1,10-diaza-18-crown-6-N,N′,O,O′)dichloromanganese(II) [MnCl₂(DA18C6)] (I) is synthesized and studied by single-crystal X-ray diffraction. The structure of compound I (space group P2₁/c, a = 11.827 Å, b = 7.580 Å, c = 19.715 Å, β = 98.76°, Z = 4) is solved by a direct method and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.026 for all 3055 independent measured reflections (CAD4 automated diffractometer, λMoK _α radiation). The [MnCl₂(DA18C6)] complex molecule in I is of the host-guest type: its Mn²⁺ cation is asymmetrically arranged in the cavity of the DA18C6 ligand and coordinated by its four heteroatoms, namely, the two N atoms and two O atoms, and by the two Cl^? anions. The coordination polyhedron of the Mn²⁺ cation (six-coordination) may be described as a distorted pentagonal bipyramid with one unfilled vertex or as a distorted square pyramid with one split vertex at the two O atoms of the DA18C6 ligand. The DA18C6 ligand in I has an unusual asymmetric conformation. The complex molecules in a crystal of I are linked by a pair of N-H···Cl intermolecular hydrogen bonds into centrosymmetric dimers.     

Substituted Diorganotin(IV) O,O’-Alkylene Dithiophosphates: Synthesis and Spectral Aspects

Six new substituted diphenyltin(IV) O,O′-alkylene dithiophosphates, (C₆H₅)₂Sn(X)S(S) POGO [G = —CH₂C(CH₃)₂CH₂—, X = Cl (1), SCN (3), ClO₄ (5); G = —CH₂C (C₄H₉)(C₂H₅)CH₂—, X = Cl (2), SCN (4), ClO₄ (6)], were synthesized by the reaction of the corresponding ammonium salts of the O,O’-alkylene dithiophosphates with an appropriate organotin(IV) chloride. The compounds were characterized on the basis of elemental and spectral analyses (ESI mass spectrometry, IR, ¹H, ¹³C, ³¹P, and ¹¹⁹Sn NMR). The presence of a four-coordinated Sn atom and monodentate O,O’-alkylene dithiophosphate moiety in compounds 1–4 as well as bidentate O,O’-alkylene dithiophosphate unit in compounds 5,6 is established.     

DFT study of interaction of O, O2, and OH with unreconstructed Pt(hkl) (h, k, l = 0, 1) surfaces—similarities, differences, and universalities

Adsorption of O, O₂, and OH on Pt(111), Pt(100), and Pt(110) surfaces was studied using periodic DFT calculations. It was found that generally adsorbate-surface interaction strengths increase with the decrease in surface packing density. On the Pt(111) surface the dissociation of O₂ molecule was not predicted, but it was predicted on Pt(100) and Pt(110) surfaces. While the strength of the adsorbate-substrate interaction decreases with the rise in surface coverage by O atoms, in the case of OH adsorption adsorbate layer gets stabilized at higher surface coverage through the hydrogen bonding. In spite of all the mentioned differences, single parameter of surface electronic structure was identified, being useful for the explanation of the adsorption trends at different adsorption sites for O and OH adsorption on Pt surfaces of various crystallographic orientations and also provided a deeper understanding of atomic oxygen adsorption as a function of surface coverage.     

Synthesis and Characterization of O,O'-Bis(α-Naphthyl, β-Naphthyl,and 2, 3, 5-Trimethylphenyl)Dithiophosphate Ligands

Abstract

O,O′-Bis(α-Naphthyl, β-Naphthyl and 2,3,5-trimethylphenyl) dithiophosphate ligands have been isolated as triethylammonium salts, (α-C₁₀H₇O-, β-C₁₀H₇O, and (CH₃)₃C₆H₂O)₂PS₂HNEt₃, by the reaction of α-C₁₀H₇OH, β-C₁₀H₇OH, or (CH₃)₃C₆H₂OH with P₂S₅ in presence of Et₃N, in 4:1:2 molar ratio in chloroform under anhydrous conditions. Acidic form of these ligands, (α-C₁₀H₇O-, β-C₁₀H₇O-, or (CH₃)₃C₆H₂O)₂PS₂H, have been obtained by the direct reaction of α-C₁₀H₇OH, β-C₁₀H₇OH-, or (CH₃)₃C₆H₂OH with P₂S₅ in 4:1 molar ratio in presence of microwaves under solvent-free conditions. Both forms of the ligands have been converted into corresponding sodium salts, (α -C₁₀H₇O-, β-C₁₀H₇O-, or (CH₃)₃C₆H₂O)₂PS₂Na. These compounds have been characterized by elemental analyses (C, H, N, and S) and mass, IR, and NMR (¹H, ¹³C and ³¹P) spectroscopic studies.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Triisopropoxyniobium(V) and tantalum(V)bis-O,O′-dialkyl dithiophosphates

Summary Triisopropoxy bis(O,O-dialkyl dithiophosphates), (i-PrO)₃M[S₂P(OR)₂]₂ (M = Nb^v, Ta^v; R = n-Pr, i-Pr, i-Bu and Ph) have been prepared by reacting the appropriate triisopropoxymetal(V)dichloride, (i-PrO)₃MCl₂ (1 mol) with sodium/ammonium dialkyl dithiophosphates (2 mols)in THF. The monomeric products which are viscous liquids, soluble in common organic solvents and highly susceptible to hydrolysis, were characterized by i.r. and n.m.r. spectra which indicate a bidentate mode of attachment of dithiophosphato groups to the metal.     

Synthesis and Characterization of O,O′ Dialkyl and Alkylene Dithiophosphates of Lanthanum(III) and their Adducts with Nitrogen and Phosphorus Donor Bases

Lanthanum(III) tris(dithiophosphates), [La{S₂P(OR)₂}₃] (where R=-CH₂CH₂CH₃ or -C₆H₅) and [La{S₂PO₂G}₃] [where G=-C(CH₃)₂CH₂CH(CH₃)-, -CH₂C(CH₃)₂CH_2-, -C(CH₃)₂C(CH₃)_2- and -CH₂CH₂CH(CH₃)-] were prepared in methanolic solutions of anhydrous LaCl₃ and ammonium dithiophosphates. Addition complexes of the type [La{S₂P(OR)₂}₃·nL] and [La{S₂PO₂G}₃·nL] [where n = 1, L = N₂C₁₀H₈ or N₂C₁₂H₈ and n = 2, L = P(C₆H₅)₃] were prepared by reaction of lanthanum(III) tris(dithiophosphates) and nitrogen or phosphorus donor bases in benzene. These newly synthesized derivatives have been characterized by elemental analyses, molecular weights, IR, ¹H and ³¹P NMR spectral measurements. Coordination numbers of six and eight are suggested for lanthanum(III) in these derivatives.     

Gas phase reactions of Cl2O with X−(D2O)n=0–4 (X = O,OD, O2, DO2, and O3)

The reactions of Cl₂O with the cluster ions X⁻(D₂O)_n=0–4 (X = O, OD, O₂, DO₂, and O₃) were studied in a He buffer gas at temperatures within the range 171–298 K and pressures of 0.27–0.51 Torr, using a flow-tube apparatus. All ions were found to react with Cl₂O at rates slower than predicted by the collision rate and the charge center was transferred from X⁻ to Cl⁻ or ClO⁻. The primary product ions Cl⁻(DOCl) and ClO⁻(DOCl) were observed to react further to produce the ions Cl₃O⁻ and Cl₃O₂⁻. The rate constants for the observed reactions are reported and the role that thermodynamics plays in determining possible reaction channels is discussed.     

γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres: Preparation, formation mechanism, magnetic property, and application in water treatment

In this paper, we report the preparation of γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres by a solvothermal combined with precursor thermal conversion method. These γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres were constructed by three-dimensional self-assembly of nanosheets, forming porous nanostructures. The effects of experimental parameters including molar ratio of reactants and reaction temperature on the precursors were studied. The time-dependent experiments indicated that the Ostwald ripening was responsible for the formation of the hierarchically nanostructured hollow microspheres of the precursors. γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres were obtained by the thermal transformation of the precursor hollow microspheres. Both γ-Fe(2)O(3) and Fe(3)O(4) hierarchically nanostructured hollow microspheres exhibited a superparamagnetic property at room temperature and had the saturation magnetization of 44.2 and 55.4emu/g, respectively, in the applied magnetic field of 20 KOe. Several kinds of organic pollutants including salicylic acid (SA), methylene blue (MB), and basic fuchsin (BF) were chosen as the model water pollutants to evaluate the removal abilities of γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres. It was found that γ-Fe(2)O(3) hierarchically nanostructured hollow microspheres showed a better adsorption ability over SA than MB and BF. However, Fe(3)O(4) hierarchically nanostructured hollow microspheres had the best performance for adsorbing MB.     

Theoretical Study on the Structures and Stability of Isomers and Complex of [Si, C, O, O] System

Introduction[Si,C ,O ,O]systemhasattractedmuchattentioninthefieldsofchemistryandmaterials1 3becauseofthefollow ingseveralcauses .First,theinterestisthepotentialimpor tanceininterstellarspace .Heretofore ,SiC ,SiOandCOhavebeendetectedwithintheinterstellarmediumformanyyears,butno [Si,C ,O ,O]isomerswereobservedinthenebulae .FormanySi containingsystemshavebeenstudiedexperimentallyandtheoretically ,4 8andinviewofthepossibleexistenceofthe [Si,C ,O ,O]radicalininterstellarspace ,weselectthe…     

Theoretical Study on the Structures and Stability of Isomers and Complex of[Si,C,O,O] Sytem

A detailed singlet potential energy surface(PES) of [Si,C,O,O] system including a van der Waals (vdW) comples SiO……CO2,eight isomers,and twelve transiton states is investigated by MP2 and QCISD(T) (single-point)methods.At the final QCISD(T)/6-311 G(2df)//MP2/6-311G(d) level with zero-point energy included,the complex SiO……CO is found to be thermodynamically and kinetically the most stable species.Although eight ismoers are located as local energy minima,they are rather unstable toward isomerization to the dissociation fragments or comples.For the reaction of silocon atoms with carbon dioxide,two competitive reaction channels are found,and the primary pathway,which leads to the products of SiO and CO fragments,is the direct oxygen-abstraction process from carbon dioxide by silicon atom with a41.16 kJ/mol reaction barrier height.Our predications are in good agreement with previous experimental and theoretical studies.     

Dinickel Complexes Bridged by Unusual (N,O,O′)-Coordinated α-Amino Acids: Syntheses,Structural Characterization and Magnetic Properties

Four novel dinickel complexes, coordinated by mixed ligands of tren and racemic amino acids, namely [Ni₂(tren)₂(dl-alaninato)(H₂O)]I₃·2H₂O (1), [Ni₂(tren)₂(dl-leucinato)(H₂O)]I₃·2.5H₂O (2), [Ni₂(tren)₂(dl-phenylalaninato)(H₂O)]I₃·H₂O (3), and {[Ni₂(tren)₂(dl-histinato)](ClO₄)₃·1.5H₂O} _n (4), have been synthesized and structurally characterized by X-ray crystallography, FTIR, u.v. and e.s. spectra. They represent the first series of dinickel(II) complexes bridged by the unusual (N,O,O)-coordinated -amino acids. In complexes (1–3), one of the nickel(II) centers is coordinated by four N-atoms of the tren ligand, one O-atom of the carboxylate group of the amino acidato ligand and one H₂O molecule. The other nickel(II) center is also coordinated by the four N-atoms of the tren ligand, one carboxylic O-atom and the amino N-atom of the amino acidato ligand, resulting in an asymmetric dinuclear core with chromophores of NiN₄O₂ and NiN₅O. In the polymeric {[Ni₂(tren)₂(dl-histinato)](ClO₄)₃·1.5H₂O} _n (4), the imidazole N-atom is also involved in ligation with nickel(II) and both nickel(II) centers have the same chromophore described as NiN₅O. The Ni...Ni distances are in the 5.5199(10)–5.5807(15)Å range. Analyses of the magnetic properties of complexes (1), (3) and (4) show that a weak ferromagnetic interaction exists between the two nickel(II) centers.