Effect of mercury(II) on metal complex labilities determined by direct-current anodic stripping voltammetry on a thin mercury film electrode

The labilities of copper, lead and cadmium complexes with fulvic acid, nitrilotriacetic acid and an iron-humic acid colloid were studied on a preplated thin mercury film electrode and with in-situ plating of mercury on a glassy carbon electrode. In the presence of mercury(II) the apparent labilities based on direct-current anodic stripping voltammetric peak-area measurements increased for each of the cadmium and lead species and for the copper iron-humic acid colloid species. In contrast, for the copper complexes with nitrilotriacetic acid and fulvic acid the lability was not measurably altered by mercury(II); it is inferred that they do not undergo rapid metal exchange with mercury(II).     

Synthesis and thermal decomposition of lanthanide hexacyanochromate(iii) complexes,Ln[Cr(CN)6]·nH2O (Ln=La-Lu; n=3, 4)

New solid complex of nitrilotriacetic acid and bismuth trichloride was synthesized by a solid phase reaction of nitrilotriacetic acid and bismuth trichloride at room temperature. The composition of the sample is BiCl₃[N(CH₂COOH)₃]_2.5. The crystal structure of the complex belongs to triclinic system with the lattice parameters: α=0.7849 nm, β=0.9821 nm, χ=2.0021 nm, α=96.50°, β=98.76° and γ=90.49°. The far-infrared spectra show the bonding between the Bi ion and N atom of nitrilotriacetic acid. The thermal analysis also demonstrates the complex formation between the bismuth ion and nitrilotriacetic acid. The gaseous pyrolysis product and the final residue in the thermal decomposition process are determined to check the thermal decomposition reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

Determination of uranium after its selective extraction as phenylacetate

The method described is based on the extraction of uranium with a chloroform solution of phenylacetic acid from slightly acidic solution containing nitrilotriacetic acid, which masks all interfering metals. After stripping into very dilute hydrochloric acid, uranium is reduced with ascorbic acid and determined complexometrically. The method permits reliable determination of uranium in the presence of all quadri-, ter- and bivalent metals investigated, molybdenum(VI), tungsten(VI), and vanadium(V).     

The Displacement of Sr from Organic Chelates by Hydroxide, Carbonate, and Calcium in Concentrated Electrolytes

The effects of calcium, hydroxide, and carbonate on the displacement of Sr from four organic chelates: ethylenedinitrilotetraacetic acid (EDTA), N-(2-hydroxyethyl)ethylenedinitrilotriacetic acid (HEDTA) nitrilotriacetic acid (NTA), and iminidiacetic acid (IDA) was studied in solutions with high base and carbonate concentration. Comparison of solutions with and without added chelators allowed the speciation changes in solution to be directly determined. Increases in both carbonate and calcium concentration were effective in displacing Sr from the chelators even under high carbonate concentration. Increases in hydroxide were ineffective in removal of Sr from the chelators, even at base concentrations as high as 6M. Under certain specific conditions, most notably when both CaCO₃(s) and SrCO₃(s) are present in solution, chemical equilibrium constraints result in cancelation of activity coefficient changes for aqueous Sr and Ca organic chelate complexes. Under such conditions the predicted ratios of chelated Ca and Sr become independent of the ionic media and predictive relations using known equilibrium constants give very good representations of the experimental data. These results indicate that manipulation of metal ion displacement reactions during chemical processing of Sr–chelate solutions can result in the displacement of Sr from organic chelators. The implications of such strategies in processing high level waste supernatants stored at Department of Energy (DOE) sites is discussed.     

Determination of mercury in air by means of computerized flow constant-current stripping analysis with a gold fibre electrode

Mercury in air was determined after collection in potassium permanganate or sodium carbonate solution. The mercury concentration in these solutions was determined in a computerized flow potentiometric stripping analyzer with a 10-μm gold fibre working electrode, a glassy carbon reference electrode and a platinum counter electrode. After sample electrolysis for 1–10 min, stripping was done in a 1 mg l^?1 gold(III) solution in 0.01 M nitric acid/0.01 M sodium nitrate with a constant stripping current of 0.50 μA. Results obtained for flue gas samples were in good agreement with results from cold-vapor atomic absorption spectrometry.     

speciation of Cadmium(II) Using Donnan Dialysis and Differential-Pulse Anodic Stripping Voltammetry in a Flow-Injection System

Abstract

A flow-injection/Donnan dialysis/differential pulse anodic stripping voltammetry system was developed for the determination of free cadmium concentrations, [Cd²⁺], in solutions containing organically complexed Cd(II). A small dialysis cell with a strong cation-exchange membrane separating the sample and the receiver channels, was equilibrated in a flow-injection system. The ionic strength of sample and receiver solutions was 0.1 M, with NaNO₃ as the bulk electrolyte. By determining a constant fraction of the Cd²⁺ associated with the membrane phase, [Cd²⁺] of the samples could be measured.

Experimentally determined [Cd²⁺] corresponded well with those calculated, using tabulated stability constants, when citric acid, nitrilotriacetic acid, and oxalic acid were added as ligands. Thus, negatively charged and uncharged complexes were excluded from the membrane. Using the experimental design presented, [Cd²⁺]>5 × 10^×8 M could be determined, but there is a great potential for increasing the sensitivity of the method.

In solutions containing 1.0 μM Cd(II) and 200 mg fulvic acid/l, the inorganic fraction (Cd²⁺ CdNO₃ ⁺ decreased from 57% to 10% when the pH increased from 4.04 to 5.51. In a soil solution from an orthic podzol, having a high concentration of dissolved organic carbon (22.4 mM), the inorganic fraction constituted 53% of the total Cd(II) concentration.     

Recovery of zinc from chloride media by batch pertraction in a rotating film contactor

A liquid membrane (pertraction) process of zinc recovery from acidic chloride solutions was studied applying a pertraction in a rotating film contactor (RFC). Tri-n-octylamine (TOA or R₃N) dissolved in n-octane was used as a carrier. The influence of the main process parameters, such as disc rotation velocity, hydrochloric acid concentration in the aqueous phases and carrier concentration in the membrane was investigated. Assuming the existence of two thin reaction layers in the feed and stripping solutions, adjacent to both water–oil interfaces, a mathematical model was developed to describe the zinc transport. On the basis of the experimental data obtained under various conditions and the model proposed, it was found that the extraction step is controlled mainly by the mass transfer resistance, whereas the stripping rate of zinc is controlled predominantly by the rate of zinc–carrier complex decomposition in the stripping side reaction layer.     

Solvent extraction of uranium(VI) into toluene by dicyclohexano-18-crown-6 from mixed aqueous-organic solutions

Extraction behaviour of uranium(VI) from mixed organo-aqueous solutions containing water-miscible protic aliphatic alcohols and several aprotic solvents was investigated by using dicyclohexano-18-crown-6(DC18C6) as an extractant. The organic phase was a binary solution of DC18C6 and toluene while the polar phase was a three component solution of uranyl nitrate, polar additive and aqueous nitric acid. Methanol, ethanol, isobutanol, dioxane, acetone, propylene carbonate and acetonitrile were used as the organic components of the mixed (polar) phase. Propylene carbonate, acetone, acetonitrile and dioxane increased the extractability of U(VI), whereas alcoholic additives showed only an antagonistic effect. The relative increase in extraction was found to be more at lower nitric acid concentrations. Possible reasons for such behaviour are briefly discussed. Recovery of U(VI) from loaded organic phase was easily accomplished using dilute perchloric acid and sulphuric acid. A sample method was standardized for the separation of plutonium(IV) from uranium(VI) based on its reductive stripping.     

Thermoanalytical properties of monobasic nitrilotriacetate salts of alkaline earth metals and zinc

Monobasic metal nitrilotriacetate hydrated salts, MH[N(CH₂COO)₃].xH₂O, have been prepared by the reaction of nitrilotriacetic acid with metal carbonate. DTA studies of these salts both in N₂ and air reveal that these salts initially undergo dehydration and then, through acetate intermediates, decompose to oxycarbonates or oxides.     

Solvent Effects on Complexation of Molybdenum（Ⅵ） with Nitrilotriacetic Acid in Different Aqueous Solutions of Propanol

By using spectrophotometric and potentiometric techniques the formation constants of the species formed in the systems H^＋＋ Mo（Ⅵ）＋nitrilotriacetic acid and H^＋ ＋ nitrilotriacetic acid have been determined in aqueous solutions of propanol at 25 ℃ and constant ionic strength 0.1 molodm^-3 sodium perchlorate. The composition of the complex was determined by the continuous variation method. It was shown that molybdenum（Ⅵ） forms a mononuclear 1 ： 1 complex with nitrilotriacetic acid of the type MoO3L^-3 at -lg[H^＋] =5.8. The formation constants in various media were analyzed in terms of Kamlet and Taft＇s parameters. Linear relationships were observed when lg Ks was plotted versusp. Finally, the results were discussed in terms of the effect of solvent on complexation.     

Transport and separation of carboxylic acids through bulk liquid membranes containing tributylamine

In this study, transport and separation of carboxylic acids (formic, acetic, propionic, and butyric acids) from their aqueous solutions through bulk liquid membrane (BLM) containing tributylamine (TBA) and the parameters affecting the transport were investigated. The influence of the parameters on the separation process such as the stirring of membrane phase, the stripping phase type and concentration, the feed phase type, and the feed:membrane:stripping phase ratio (F/M/S phase ratio) were examined. In the experiments, 10% (w/w) acid solutions (formic, acetic, propionic, and butyric acids) were used as the feed phase, different concentrations of NaOH solutions within the range of 0–2?N were used as the stripping phase, and 0.5?mol/lt TBA, dissolved in oleyl alcohol, was used as the membrane phase. It was determined that the stirring of the membrane phase increases the transport of acids. In the case of 2 N NaOH solution in the stripping phase and F/M/S phase ratio 1:2:1 gave the best recovery (96.75%) for butyric acid. It was observed that BLM was an effective technique for the separation of carboxylic acids from aqueous solutions.     

Technetium(VII) extraction by a primary amine and technetium(VII) coprecipitation with ammonium diuranate in hydrofluoric acid solution

The separation of technetium(VII) from uranium(VI) has beeen studied through experiments on the coprecipitation of Tc(VII) with ammonium diuranate precipitate, and in the extraction of Tc(VII) from an aqueous hydrofluoric acid solution using a primary amine (Primene JMT) as an extractant dissolved inn-heptane. The extraction of Tc(VII) reached a quantitative level after several repetitions of the extraction procedure. Also, the stripping of Tc(VII) into 3M aqueous solution of ammonium carbonate was enhanced to a level over 99% by repeating the stripping cycles.     

三聚磷酸二氢铝与有机胺的插层反应特征

采用IR、XRD、SEM、EDS、DT-TG和滴定实验等技术手段研究主体三聚磷酸二氢铝(ATP)与客体甲胺、乙胺、正丙胺和正丁胺等有机胺的插层反应特性。 实验结果表明,ATP与甲胺、乙胺、正丙胺、正丁胺发生了化学反应,有机胺中的N与ATP层间-OH上的H形成配位键。 这些有机胺通过插层反应改变了ATP的酸性、层间距和热分解温度,但没有改变颗粒的层状形貌。 层间距从0.795 nm增大至1.71 nm,层间距d与有机胺的碳原子数Cn呈线性关系：d=0.229Cn+0.811,R2=0.9986。 有机胺分子链越长则越具有剥离倾向。     

Quantitative chromatographic method for the determination of low levels of nitrilotriacetic and ethylenediaminetetraacetic acids in diethylenetriaminepentaacetic acid

A quantitative method for determination of low levels (0.05%, w/w) of nitrilotriacetic and ethylenediaminetetraacetic acids in diethylenetriaminepentaacetic acid is described. Palmitic acid is added to the chelator as an internal standard before esterification with methanol containing 2%(v/v)H2SO4. The methyl esters of palmitic, nitrilotriacetic, and ethylenediaminetetraacetic acids are first separated from diethylenetriaminepentaacetate by silicic acid column chromatography and are subsequently quantitated by gas-liquid chromatography. The method is both accurate and reproducible with less than 10% relative error. Thin-layer chromatographic separations of the methyl esters, and quantitation at the 1% level, are also described.     

Kinetics and mechanism of base-catalysed degradations of substituted aryl-N-hydroxycarbamates, their N-methyl and N-phenyl analogues

The kinetics and mechanism of the degradation reactions of substituted phenyl N-hydroxycarbamates and their N-methyl and N-phenyl analogues have been studied at pseudo-first-order reaction conditions in aqueous buffers and sodium hydroxide solutions at 20 [degree]C and 60 [degree]C and at I= 1 mol[middle dot]l(-1). The dependence of log k(obs) on pH for phenyl N-hydroxycarbamates at pH < 9 and pH > 13 is linear with the unit slope; at pH 10-12 log k(obs) is pH independent. The Bronsted coefficient [small beta](lg) is about -1 (pH 7-13) and -1.53 (pH > 13) indicating that the degradation reaction of phenyl N-hydroxycarbamates follows an E1cB mechanism giving the corresponding phenol/phenolate and HO-N[double bond, length as m-dash]C[double bond, length as m-dash]O. The latter species undergoes further decomposition to give carbonate, nitrogen and ammonia as final products. In contrast to the phenyl N-hydroxycarbamates the N-methyl derivatives at pH 7-9 undergo degradation to the corresponding phenol/phenolate, carbonate and methylamine via a concerted mechanism ([small beta](lg) is about -0.75). The only exception is 4-nitrophenyl N-hydroxy-N-methylcarbamate in which the predominant break down pathway proceeds via the Smiles rearrangement to give sodium N-methyl-(4-nitrophenoxy)carbamate. At pH > 9 the reaction of N-hydroxy-N-methylcarbamates is kinetically complex: the dependence of absorbance on time is not exponential and it proceeds as a consecutive two-step reaction. N-Hydroxy-N-phenylcarbamate under the same conditions undergoes degradation to phenol, carbonate, aniline and azoxybenzene.     

Effect of Lactic Acid on the Electrochemical Determination of Iodide Ions

The results of a study of the effect of lactic acid on the determination of trace iodide ions by stripping voltammetry (SVA) and potentiometry with ion-selective electrodes are presented. In the latter case, the interference of lactic acid was eliminated by adding 30% ethanol to the test sample, whereas various sample preparation procedures with test sample decomposition were used in SVA.     

Studies on extraction of chromium (VI) from acidic solutions containing various metal ions by emulsion liquid membrane using Alamine 336 as extractant

The extraction of chromium (VI) ions from acidic solutions containing various metal ions by emulsion liquid membrane (ELM) was studied. Liquid membrane consists of a diluent, a surfactant, and an extractant. 0.5 M ammonium carbonate solution was used as stripping solution. Effects of acid concentration in feed solution, type and concentration of stripping solution, mixing speed, surfactant concentration, phase ratio and the influence of membrane characteristics were studied and optimum conditions were determined. Under the optimum conditions, extraction of chromium (VI) was tested and it was possible to selectively extract 99% of chromium from the acidic feed solution. This study also examined the effect of extractant concentration and acid type in the feed solution on the extraction of Cr (VI) ions and almost all of Cr (VI) from the acidic feed solution containing 500 mg/L from each of Co (II), Ni (II), Cd (II), Zn (II), and Cu (II) ions, and 100–500 mg/L Cr (VI) was extracted within 5–10 min.     

Metal Ion Buffer Systems for Ionometry in Water-Ethanol Mixtures and Micellar Medium of Sodium Dodecyl Sulfate

The concentration dissociation constants of nitrilotriacetic acid and the concentration stability constants of Cd(II) complexes with the nitrilotriacetic acid anion in water-ethanol mixtures and of Cu(II) and Cd(II) complexes with o-phenanthroline and 2,2′-bipyridine in micellar solutions of sodium dodecyl sulfate were determined potentiometrically. Based on the concentration constants determined, Cd²⁺ and Cu²⁺ buffer solutions were developed for calibration of a Cd²⁺-selective electrode in water-ethanol mixtures and Cd²⁺ and Cu²⁺-selective electrodes in micellar solutions of sodium dodecyl sulfate within the ranges pCu 9.7–13.5 and pCd 7.5–11.8.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 2, 2005, pp. 273–278.Original Russian Text Copyright © 2005 by Chernysheva, Loginova, Bazilyanskaya.     

Extraction of sulphuric acid from technological solution of hydroxylamine sulphate

The extraction of sulphuric acid from solutions containing hydroxylamine sulphate and ammonium sulphate with Cyanex 923 and the acid stripping from loaded Cyanex 923 are studied at 20 and 50°C. The effect of the numbers of extraction and stripping stages and the volume phase ratios in extraction and stripping upon sulphuric acid recovery is discussed. The process can be design to obtain a high or low recovery of sulphuric acid but with its low or high concentration, respectively.     

Quantum-chemical study of thermodynamics of hydrogen-bonded methylamine-methanol complexes reaction with dimethyl carbonate

Thermodynamic parameters of the reactions of dimethyl carbonate cis-cis and cis-trans conformers with methylamine, methylamine dimer, and methylamine complexes involving linear methanol associates have been computed with the B3LYP and WB97XD quantum-chemical methods. The both methods have given similar results. Thermodynamically, reactions of the cis-trans conformer are preferred over the analogous reactions of the cis-cis conformer, and the reactions with methylamine dimer and methylamine-methanol trimer complex are preferred over the reactions with methylamine monomer. The acid-base properties of the hydrogen-bonded methanol complexes are significantly enhanced with increasing degree of association. Stability of the methylamine complexes with methanol clusters is increased with more of the alcohol molecules involved.