Dansyl-anthracene dyads for ratiometric fluorescence recognition of Cu2+

Dansyl-anthracene dyads 1 and 2 in CH(3)CN-H(2)O (7:3) selectively recognize Cu(2+) ions amongst alkali, alkaline earth and other heavy metal ions using both absorbance and fluorescence spectroscopy. In absorbance, the addition of Cu(2+) to the solution of dyads 1 or 2 results in appearance of broad absorption band from 200 nm to 725 nm for dyad 1 and from 200 nm to 520 nm for dyad 2. This is associated with color change from colorless to blue (for 1) and fluorescent green (for 2). This bathochromic shift of the spectrum could be assigned to internal charge transfer from sulfonamide nitrogen to anthracene moiety. In fluorescence, under similar conditions dyads 1 and 2 on addition of Cu(2+) selectively quench fluorescence due to dansyl moiety between 520-570 nm (for 1)/555-650 nm (for 2) with simultaneous fluorescence enhancement at 470 nm and 505 nm for dyads 1 and 2, respectively. Hence these dyads provide opportunity for ratiometric analysis of 1-50 μM Cu(2+). The other metal ions viz. Fe(3+), Co(2+), Ni(2+), Cd(2+), Zn(2+), Hg(2+), Ag(+), Pb(2+), Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+) do not interfere in the estimation of Cu(2+) except Cr(3+) in case of dyad 1. The coordination of dimethylamino group of dansyl unit with Cu(2+) causes quenching of fluorescence due to dansyl moiety between 520-600 nm and also restricts the photoinduced electron transfer from dimethylamino to anthracene moiety to release fluorescence between 450-510 nm. This simultaneous quenching and release of fluorescence respectively due to dansyl and anthracene moieties emulates into Cu(2+) induced ratiometric change.     

Selective colorimetric sensing of Cu2+ using triazolyl monoazo derivative

Although the high sensitivity, high selectivity and fast response make emission (fluorescence) based technique as one of the most promising tool for developing the chemosensors for metal ions, the past few years have witnessed a demand for the absorption based chemosensors for paramagnetic heavy metal ions, especially Cu(2+). Being paramagnetic, Cu(2+) leads to the low signal outputs ("turn-off") caused by decreased emission which may sometimes give false positive response, rendering the emission based technique less reliable for analytical purposes. Herein, we report synthesis and characterization of a hetarylazo derivative, characterized by a strong charge-transfer band which gets attenuated convincingly in the presence of Cu(2+) leading to distinct naked-eye color change (yellow to purple), and to a lesser extent in the presence of Cd(2+), Zn(2+), Co(2+), Pb(2+), Fe(2+), Ni(2+), Fe(3+) and Hg(2+) for which the naked eye sensitivity was comparatively (w.r.t. Cu(2+)) much less. No response was observed for the other metal ions including Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Mn(2+), Ag(+), Zn(2+), Cd(2+), Pb(2+), and lanthanides Ce(3+), La(3+), Pr(3+), Eu(3+), Nd(3+), Lu(3+), Yb(3+), Tb(3+), Sm(3+), Gd(3+). The proposed sensing mechanism has been ascribed to the stabilization of LUMO after complexation with Cu(2+) and a 1:1 stoichiometry has been deduced.     

Development and applications of fluorescent indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.     

Dual-mode unsymmetrical squaraine-based sensor for selective detection of Hg2+ in aqueous media

A novel chemosensor based on unsymmetrical squaraine dye (USQ-1) for the selective detection of Hg(2+) in aqueous media is described. USQ-1 in combination with metal ions shows dual chromogenic and "turn-on" fluorogenic response selectivity toward Hg(2+) as compared to Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Cu(2+), Cd(2+), Mn(2+), Fe(3+), Ag(+), Pb(2+), Zn(2+), Ni(2+) and Co(2+) due to the Hg(2+)-induced deaggregation of the dye molecule. A recognition mechanism based on the binding mode is proposed based on the absorption and fluorescence changes, (1)H NMR titration experiments, ESI-MS study, and theoretical calculations.     

Solvent dependent fluorescent properties of a 1,2,3-triazole linked 8-hydroxyquinoline chemosensor: tunable detection from zinc(II) to iron(III) in the CH3CN/H2O system

A triazole-containing 8-hydroxyquinoline (8-HQ) ether 2 was efficiently synthesized in two steps from the "click" strategy. Compound 2 gave a strong fluorescence (Φ = 0.21) in nonprotic solvent like CH(3)CN, and a weak fluorescence (Φ = 0.06) in protic solvent like water. In water, a more than 100 nm red shift of the fluorescence maximum was observed for compound 2 in comparison with that in CH(3)CN. This fluorescence difference may be attributed to the intermolecular photoinduced proton transfer (PPT) process involving the protic solvent water molecules. Similarly, this intermolecular PPT process was also observed in the high-water-content CH(3)CN aqueous solution (e.g., CH(3)CN/H(2)O = 5/95, v/v). The water content in the CH(3)CN/H(2)O binary solvent mixture greatly affected the fluorescence intensity (e.g., Φ = 0.06 and 0.25 when CH(3)CN/H(2)O = 5/95 and 95/5, v/v, respectively) and emission wavelength. Using this interesting property, by simple variation of the water content in the CH(3)CN aqueous solution, compound 2 was tuned from a selective "turn-on" fluorescent sensor for Zn(2+) (CH(3)CN/H(2)O = 5/95, v/v) to a ratiometric one for Zn(2+) and a selective "turn-off" one for Fe(3+) (CH(3)CN/H(2)O = 95/5, v/v) over a wide range of pH value. In high-water-content (CH(3)CN/H(2)O = 5/95, v/v) aqueous solution compound 2 shows a selective "turn-on" response toward Zn(2+), with a 10-fold enhancement in the fluorescence intensity at 428 nm and a 62 nm blue shift of the emission maximum (490 to 428 nm) due to the inhibition of intermolecular PPT process upon chelating with Zn(2+). However, in a less polar solvent (CH(3)CN/H(2)O = 95/5, v/v) in which compound 2 has high fluorescence (quantum yield =0.25), it shows a ratiometric response toward Zn(2+), with a continuous decrease of the fluorescence intensity at 399 nm and an increase at 423 nm. More interestingly, in this case, it also exhibits a very sensitive, selective, and ratiometric fluorescence quenching in the presence of Fe(3+), with an 81 nm red shift of the emission maximum (399 to 480 nm) in a wide range of pH through a metal ligand charge transfer (MLCT) effect.     

A BODIPY-based colorimetric and fluorometric chemosensor for Hg(II) ions and its application to living cell imaging

A new monostyryl boron dipyrromethene derivative (MS1) appended with two triazole units indicates the presence of Hg(2+) among other metal ions with high selectivity by color change and red emission. Upon Hg(2+) binding, the absorption band of MS1 is blue-shifted by 29 nm due to the inhibition of the intramolecular charge transfer from the nitrogen to the BODIPY, resulting in a color change from blue to purple. Significant fluorescence enhancement is observed with MS1 in the presence of Hg(2+); the metal ions Ag(+), Ca(2+), Cd(2+), Co(2+), Cu(2+), Fe(2+), Fe(3+), K(+), Mg(2+), Mn(2+), Ni(2+), Pb(2+), and Zn(2+) cause only minor changes in the fluorescence of the system. The apparent association constant (K(a)) of Hg(2+) binding in MS1 is found to be 1.864 × 10(5) M(-1). In addition, fluorescence microscopy experiments show that MS1 can be used as a fluorescent probe for detecting Hg(2+) in living cells.     

A chelation enhanced selective fluorescence sensing of Hg2+ by a simple quinoline substituted tripodal amide receptor

Two tris(2-aminoethyl)amine (tren) based tripodal amide fluoroionophores, 1 and 2, functionalized with quinoline (chelating fluorophore) and naphthalene (non-chelating fluorophore) respectively, are synthesized in good yields. Fluoroionophore 1 shows a selective UV-Vis spectral shift in the case of Hg(2+) in acetonitrile among different metal ions like Li(+), Na(+), Ca(2+), Mg(2+), Cr(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), and Ag(+). On the other hand, fluoroionophore 2 shows no selectivity towards any of the above metal ions in the UV-Vis study. Furthermore, 1 shows a selective chelation induced fluorescence enhancement in the presence of Hg(2+) whereas 2 shows the enhancement of fluorescence with most of the metal ions via a photoinduced charge transfer mechanism. The naked eye detection of Hg(2+) in an acetonitrile solution of 1 shows a greenish fluorescence upon UV light irradiation. The isolated Hg(2+) complex of 1, 3, shows a similar UV-Vis and fluorescence spectral output as observed from in situ spectroscopic studies of 1 in the presence of Hg(2+). Infra-red (IR) and (1)H- NMR studies also reveal the interaction of Hg(2+) with the quinoline nitrogen atoms as well as with the amide functionality.     

A squaraine-based colorimetric and "turn on" fluorescent sensor for selective detection of Hg2+ in an aqueous medium

A novel squaraine-based chemosensor SQ-1 has been synthesized, and its sensing behavior toward various metal ions was investigated by UV-vis and fluorescence spectroscopies. In AcOH-H(2)O (40:60, v/v) solution, Hg(2+) ions coordinate with SQ-1 causing a deaggregation which induces a visual color and absorption spectral changes as well as strong fluorescence. In contrast, the addition of other metals (e.g., Pb(2+), Cd(2+), Cu(2+), Zn(2+), Al(3+), Ni(2+), Co(2+), Fe(3+), Ca(2+), K(+), Mg(2+), Na(+), and Ag(+)) does not induce these changes at all. Thus SQ-1 is a specific Hg(2+) sensing agent due to the inducing deaggregation of the dye molecule by Hg(2+).     

Indole-based chemosensor for Hg2+ and Cu2+ ions: applications in molecular switches and live cell imaging

An indole based "ratiometric" and "turn-off" tris(N-methylindolyl)methane based chemosensor depicting a contrasting fluorescent behavior towards Hg(2+) and Cu(2+) ions, exhibited NOR and YES logic functions, and also imaged intracellular Hg(2+) in cervix cancer (HeLa) cells.     

Highly sensitive, selective, and rapid fluorescence Hg2+ sensor based on DNA duplexes of poly(dT) and graphene oxide

Coupling T base with Hg(2+) to form stable T-Hg(2+)-T complexes represents a new direction in detection of Hg(2+). Here a graphene oxide (GO)-based fluorescence Hg(2+) analysis using DNA duplexes of poly(dT) that allows rapid, sensitive, and selective detection is first reported. The Hg(2+)-induced T(15)-(Hg(2+))(n)-T(15) duplexes make T(15) unable to hybridize with its complementary A(15) labelled with 6'-carboxyfluorescein (FAM-A(15)), which has low fluorescence in the presence of GO. On the contrary, when T(15) hybridizes with FAM-A(15) to form double-stranded DNA because of the absence of Hg(2+), the fluorescence largely remains in the presence of GO. A linear range from 10 nM to 2.0 μM (R(2) = 0.9963) and a detection limit of 0.5 nM for Hg(2+) were obtained under optimal experimental conditions. Other metal ions, such as Al(3+), Ag(+), Ca(2+), Ba(2+), Mg(2+), Zn(2+), Mn(2+), Co(2+), Pb(2+), Ni(2+), Cu(2+), Cd(2+), Cr(3+), Fe(2+), and Fe(3+), had no significant effect on Hg(2+) detection. Moreover, the sensing system was used for the determination of Hg(2+) in river water samples with satisfactory results.     

A new fluorescent and colorimetric probe for Cu2+ in live cells

Based on a change in structure between spirocyclic (non-fluorescent) and ring-open (fluorescent) forms of rhodamine-based dyes, a new fluorescent and colorimetric Cu(2+) probe was designed and synthesized. Upon treatment with Cu(2+), the weakly fluorescent probe exhibited a strong fluorescence response with high selectivity. In addition, the turn-on fluorescent probe upon the addition of Cu(2+) was applied in live cell imaging.     

2,1,3-Benzoxadiazole-based selective chromogenic chemosensor for rapid naked-eye detection of Hg2+ and Cu2+

We report a simple twisted intramolecular charge transfer (TICT) chromogenic chemosensor for rapid and selective detection of Hg(2+) and Cu(2+). The sensor was composed of an electron-acceptor 4-fluoro moiety and an electron-donor 7-mercapto-2,1,3-benzoxadiazole species where the S together with the 1-N provided the soft binding unit. Upon Hg(2+) and Cu(2+) complexation, remarkable but different absorbance spectra shifts were obtained in CH(3)CN-H(2)O mixed buffer solution at pH 7.6, which can be easily used for naked-eye detection. The sensor formed a stable 2:1 complex with Cu(2+), and both 2:1 and 3:1 complexes with Hg(2+). While alkali-, alkaline earth- and other heavy and transition metal ions such as Na(+), Mg(2+), Mn(2+), Co(2+), Ni(2+), Ag(+), Zn(2+), Pb(2+) and Cd(2+) did not cause any significant spectral changes of the sensor. This finding is not only a supplement to the detecting methods for Hg(2+) and Cu(2+), but also adds new merits to the chemistry of 4,7-substituted 2,1,3-benzoxadiazoles.     

Highly sensitive and fast responsive fluorescence turn-on chemodosimeter for Cu2+ and its application in live cell imaging

A rhodamine B derivative 4 containing a highly electron-rich S atom has been synthesized as a fluorescence turn-on chemodosimeter for Cu(2+). Following Cu(2+)-promoted ring-opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu(2+); this suggests that chemodosimeter 4 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu(2+). Importantly, 4 can selectively recognize Cu(2+) in aqueous media in the presence of other trace metal ions in organisms (such as Fe(3+), Fe(2+), Cu(+), Zn(2+), Cr(3+), Mn(2+), Co(2+), and Ni(2+)), abundant cellular cations (such as Na(+), K(+), Mg(2+), and Ca(2+)), and the prevalent toxic metal ions in the environment (such as Pb(2+) and Cd(2+)) with high sensitivity (detection limit < or =10 ppb) and a rapid response time (< or =1 min). Moreover, by virtue of the chemodosimeter as fluorescent probe for Cu(2+), confocal and two-photon microscopy experiments revealed a significant increase of intracellular Cu(2+) concentration and the subcellular distribution of Cu(2+), which was internalized into the living HeLa cells upon incubation in growth medium supplemented with 50 muM CuCl(2) for 20 h.     

Salicylimine-based fluorescent chemosensor for aluminum ions and application to bioimaging

In this study, an assay to quantify the presence of aluminum ions using a salicylimine-based receptor was developed utilizing turn-on fluorescence enhancement. Upon treatment with aluminum ions, the fluorescence of the sensor was enhanced at 510 nm due to formation of a 1:1 complex between the chemosensor and the aluminum ions at room temperature. As the concentration of Al(3+) was increased, the fluorescence gradually increased. Other metal ions, such as Na(+), Ag(+), K(+), Ca(2+), Mg(2+), Hg(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Pb(2+), Cr(3+), Fe(3+), and In(3+), had no such significant effect on the fluorescence. In addition, we show that the probe could be used to map intracellular Al(3+) distribution in live cells by confocal microscopy.     

Experimental and computational studies of selective recognition of Hg2+ by amide linked lower rim 1,3-dibenzimidazole derivative of calix[4]arene: species characterization in solution and that in the isolated complex, including the delineation of the nanostructures

Amide linked lower rim 1,3-dibenzimidazole derivative of calix[4]arene, L has been shown to be sensitive and selective to Hg(2+) in aqueous acetonitrile solution based on fluorescence spectroscopy, and the stoichiometry of the complexed species has been found to be 1:1. The selectivity of L toward Hg(2+) has been shown among 11 M(2+) ions, viz., Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), Ca(2+), and Mg(2+) studied, including those of the mercury group and none of these ions impede the recognition of Hg(2+) by L. Role of the solvent on the recognition of Hg(2+) has been demonstrated. The role of calix[4]arene platform and the benzimidazole moieties in the recognition of Hg(2+) by L has been delineated upon performing such studies with five different molecules of relevance as reference molecular systems. The binding cores formed by the receptor L and the reference compounds have been established based on the single crystal XRD structures, and the preferential metal ion binding cores have been discussed. The binding of Hg(2+) with L has been further established based on (1)H and (13)C NMR, ESI MS, absorption, and fluorescence lifetime measurements. Some of these techniques have been used to establish the stoichiometry of the species formed. The complex species formed between L and Hg(2+) have been isolated and characterized and found to be 1:1 species even in the isolated complex. Whereas transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) provided the nanostructural behavior of L, the TEM and SEM demonstrated that the mercury complex has different characteristics when compared to L. The TEM, SEM, and powder XRD studies revealed that whereas L is crystalline, that of the mercury complex is not, perhaps a reason for not being able to obtain single crystals of the complex. Binding characteristics of Hg(2+) toward L have been established based on the DFT computational calculations.     

Lower rim 1,3-di{4-antipyrine}amide conjugate of calix[4]arene: synthesis, characterization, and selective recognition of Hg2+ and its sensitivity toward pyrimidine bases

The structurally characterized lower rim 1,3-di{4-antipyrine}amide conjugate of calix[4]arene (L) exhibits high selectivity toward Hg(2+) among other biologically important metal ions, viz., Na(+), K(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), and Ag(+) as studied by fluorescence, absorption, and ESI MS. L acts as a sensor for Hg(2+) by switch-off fluorescence and exhibits a lowest detectable concentration of 1.87 ± 0.1 ppm. The complex formed between L and Hg(2+) is found to be 1:1 on the basis of absorption and fluorescence titrations and was confirmed by ESI MS. The coordination features of the mercury complex of L were derived on the basis of DFT computations and found that the Hg(2+) is bound through an N(2)O(2) extending from both the arms to result in a distorted octahedral geometry with two vacant sites. The nanostructural features such as shape and size obtained using AFM and TEM distinguishes L from its Hg(2+) complex and were different from those of the simple mercuric perchlorate. L is also suited to sense pyrimidine bases by fluorescence quenching with a minimum detection limit of 1.15 ± 0.1 ppm in the case of cytosine. The nature of interaction of pyrimidine bases with L has been further studied by DFT computational calculations and found to have interactions through a hydrogen bonding and NH-π interaction between the host and the guest.     

Exploring the emissive properties of new azacrown compounds bearing aryl, furyl, or thienyl moieties: a special case of chelation enhancement of fluorescence upon interaction with Ca(2+), Cu(2+), or Ni(2+)

Three new compounds bearing furyl, aryl, or thienyl moieties linked to an imidazo-crown ether system (1, 2, and 3) were synthesized and fully characterized by elemental analysis, infrared, UV-vis absorption, and emission spectroscopy, X-ray crystal diffraction, and MALDI-TOF-MS spectrometry. The interaction toward metal ions (Ca(2+), Cu(2+), Ni(2+), and Hg(2+)) and F(-) has been explored in solution by absorption and fluorescence spectroscopy. Mononuclear and binuclear metal complexes using Cu(2+) or Hg(2+) as metal centers have been synthesized and characterized. Compounds 2 and 3 show a noticeable enhancement of the fluorescence intensity in the presence of Ca(2+) and Cu(2+) ions. Moreover compound 3 presents a dual sensory detection way by modification of the fluorimetric and colorimetric properties in the presence of Cu(2+) or Hg(2+). EPR studies in frozen solution and in microcrystalline state of the dinuclear Cu(II)3 complex revealed the presence of an unique Cu(2+) type.     

A methionine-based turn-on chemical sensor for selectively monitoring Hg2+ ions in 100% aqueous solution

Dansyl-labeled methionine is synthesized by solid-phase synthesis, and found to be a highly sensitive and selective sensor for Hg(2+). The sensor sensitively detects Hg(2+) ions in aqueous solution by a turn-on response; however, the sensor detects Hg(2+) ions by a turn-off response in organic and mixed aqueous-organic solutions. We investigated the binding stoichiometry, binding constant, and binding mode of the sensor under various solvent conditions. In 100% aqueous solution, 2 : 1 complexation of the sensor with Hg(2+) ions is more favorable than 1 : 1 complexation, whereas the sensor preferentially forms a 1 : 1 complex in 100% CH(3)CN or in 50% CH(3)CN-aqueous solutions. Results reveal that the stoichiometry of the sensor-Hg(2+) complex plays an important role in the type of response to Hg(2+) ions, and that 2 : 1 complexation is required for a turn-on response to Hg(2+) ions in aqueous solution.     

Highly sensitive and selective fluorescent sensor for Zn2+/Cu2+ and new approach for sensing Cu2+ by central metal displacement

An "off-on" Zn(2+) and "on-off" Cu(2+) fluorescent chemosensor C was designed and synthesized. The binding of C and Zn(2+)/Cu(2+) is chemically reversible by the addition of EDTA disodium solution; moreover, the fluorescence emission signal of ZnC decreased with the addition of Cu(2+), demonstrating that ZnC could detect Cu(2+)via metal displacement.     

Photoinduced electron transfer (PET) based Zn2+ fluorescent probe: transformation of turn-on sensors into ratiometric ones with dual emission in acetonitrile

Ratiometric sensors for the detection of metal ions have gained increasing attention due to its self-calibration tendency for the environmental effects. In this context, we have synthesized and characterized a dual emitting ratiometric Zn(2+) probe (1) having acridinedione as a fluorophore and N,N-bis(2-pyridylmethyl)amine (BPA) as a receptor unit. Existence of two different conformation of the molecule with photoinduced electron transfer (PET) from amine moiety to the acridinedione fluorophore leads to dual emission, namely locally excited (425 nm) and anomalous charge transfer emission (560 nm) in aprotic solvents. In the presence of one equivalent of Zn(2+), a 15-fold fluorescence enhancement in the locally excited state together with the quenching of charge transfer emission is observed. The intensity changes at the two emission peaks allow a ratiometric detection of Zn(2+) under PET signaling mechanism. The utilization of PET process for the ratiometric fluorescence change will further signify the importance of PET mechanism in sensing action. Addition of Zn(2+) to 1 in acetonitrile/water mixtures shows a single emission peak with fluorescence enhancement.