Self-assembly control of a pyridine-containing diblock copolymer by perfluorinated counter anions during salt-induced micellization

The micelle formation of poly[(4-pyridinemethoxymethyl)styrene]-block-polystyrene (PPySt-b-PSt) was studied in the nonselective solvent using perfluoroalkyl carboxylic acids. PPySt-b-PSt showed no self-assembly into micelles in THF, because this solvent was nonselective for the copolymer. Dynamic light scattering demonstrated that the diblock copolymer formed the micelles in the solvent in the presence of perfluoroalkyl carboxylic acids in which the number of carbons in the perfluoroalkyl chains was over eight. ¹H NMR revealed that the micellization proceeded through the salt formation of the pyridinium perfluoroalkyl carboxylate and through the aggregation of the perfluoroalkyl chains in the counter anions. The hydrodynamic radius and the aggregation number of the micelles increased with an increase in the length of the perfluoroalkyl chain. The copolymer needed less carboxylic acid with longer perfluoroalkyl chain to form the micelles. The copolymer produced the micelles with lower aggregation number and higher critical micelle concentration at higher temperature, although the micellar size was almost independent of the temperature. The micelles were unstable with respect to the variation in the temperature, and were dissociated into the unimers with the increase in the temperature. The micelles, however, were reconstructed by decreasing the temperature. This dissociation–reconstruction of the micelles was controlled reversibly not only by the temperature but also by the concentration of the perfluoroalkyl carboxylic acid. An increase in the acid concentration suppressed the dissociation into the unimers, while promoting the reconstruction of the micelles.     

Direct preparation of core cross-linked micelles in a nonselective solvent

This is the first light scattering study demonstrating that the size of micelles, the aggregation number, and the mobility of the core blocks of the micelles could be controlled by the length of the cross-linker in the micellar cores. The core cross-linked micelles were prepared using a poly[(4-pyridinemethoxy-methyl)styrene]-block-polystyrene (PPySt-b-PSt) diblock copolymer and perfluoroalkyl dicarboxylic acid. The PPySt-b-PSt copolymer formed the micelles in THF, a nonselective solvent, in the presence of the perfluoroalkyl dicarboxylic acid. The light scattering studies demonstrated that the micellar size and aggregation number were dependent on the chain length of the perfluoroalkyl dicarboxylic acid. Perfluoroazelaic acid produced micelles with a larger hydrodynamic radius and higher aggregation number than tetrafluorosuccinic acid. The micellization proceeded through the formation of the pyridinium carboxylate and the cross-linkage between the PPySt blocks via the dicarboxylic acid. The core cross-linked micelles were thermally stable and maintained its structure with changes in the temperature. A ¹H NMR analysis revealed that the micelles prepared by perfluoroazelaic acid had more mobility of the core blocks than those by tetrafluorosuccinic acid.     

Micelle formation of a nonamphiphilic poly(vinylphenol)-<Emphasis Type="Italic">block</Emphasis>-polystyrene diblock copolymer in ethyl acetate

The micelle formation of a poly(vinylphenol)-block-polystyrene diblock copolymer was studied in ethyl acetate, a nonselective solvent using α,ω-diamine. The copolymer formed micelles in ethyl acetate in the presence of a small amount of the α,ω-diamine. Light scattering studies demonstrated that the micellization was dependent on the grade, the bulkiness, and the conformation of the diamines. The copolymer needed more diamine with the increasing grade of the diamine, due to a decrease in the basicity of the diamine. The bulkiness of the diamines also reduced the efficiency of the micellization by hindering the formation of the hydrogen bond cross-linking. Similarly, the conformation of the diamine affected the micellization, since the conformation determined the intramolecular spatial distance between the animo groups. Trans-1,2-cyclohexanediamine was more effective than the cis-isomer to produce the micelles. Furthermore, (1S,2S)-(+)-1,2-cyclohexanediamine, one of the mirror image isomers composing the trans-isomer, was more effective in producing the micelles than the trans-isomer. The interaction between the mirror image isomers also obstructed the micellization. The micellization, coupled with the thermoresponsivity of the micelles, were influenced by the solvent quality. The dissociation of the micelles into unimers was suppressed in ethyl acetate, while the reconstruction was promoted, in comparison with those in 1,4-dioxane and THF.     

Oxidation-induced micellization of a diblock copolymer containing stable nitroxyl radicals

Oxidation-induced micellization was attained for a diblock copolymer containing 2,2,6,6-tetramethylpyperidine-1-oxyl (TEMPO). Poly(4-vinylbenzyloxy-TEMPO)-block-polystyrene (PVTEMPO-b-PSt) showed no self-assembly in carbon tetrachloride, a nonselective solvent. Dynamic light scattering demonstrated that the copolymer self-assembled into micelles of 49.5-nm hydrodynamic diameter when chlorine gas was added to the copolymer solution. The UV and electron spin resonance (ESR) analyses verified that as TEMPO was oxidized into the one-electron oxidant, that is, oxoaminium chloride (OAC) by the chlorine, the nonamphiphilic block copolymer became amphiphilic in nature, and thus, the polymers underwent micellization. An investigation of the relation between the micellization and the oxidation degree of the TEMPO into the OAC revealed that the micellization was induced by only 16% of the OAC. It was confirmed that the POAC-b-PSt micelles were spherical in shape by transmission electron microscopy observation. The micelles served as a two-electron oxidizing agent for benzyl alcohol to quantitatively give benzaldehyde. The micellar structure was maintained after the oxidation of benzyl alcohol without any dissociation into unimers because the OAC was converted into an insoluble hydroxylamine–hydrochloride salt. On the other hand, the micelles reacted with N,N,N′,N′-tetramethyl-1,4-phenylenediamine (TMPD) to produce Wurster’s blue chloride by a one-electron transfer from TMPD to the OAC, converting themselves into PVTEMPO-b-PSt unimers.     

Micelle formation induced by photolysis of a poly(<Emphasis Type="Italic">tert</Emphasis>-butoxystyrene)-<Emphasis Type="Italic">block</Emphasis>-polystyrene diblock copolymer

We found the novel photolysis-induced micellization of the poly(tert-butoxystyrene)-block-polystyrene diblock copolymer (PBSt-b-PSt). PBSt-b-PSt with a molecular weight of Mn(PBSt-b-PSt) = 15,000-b-97,000 showed no self-assembly in dichloromethane and existed as isolated copolymers with a hydrodynamic diameter of 16.6 nm. Dynamic light scattering demonstrated that the copolymer produced micelles with a 63.0 nm hydrodynamic diameter when the copolymer solution was irradiated with a high-pressure mercury lamp at room temperature in the presence of bis(alkylphenyl) iodonium hexafluorophosphate, a photoacid generator. The ¹H NMR analysis revealed that the micellization resulted from the photolysis of the PBSt blocks into insoluble poly(vinyl phenol) blocks based on the fact that the signal intensity of the tert-butyl protons decreased over time during the irradiation. It was found that the micellization rapidly proceeded as the degree of the photolysis reached over 50% and was completed at 90%.     

Thermodynamics and kinetics on micelle formation of a nonamphiphilic poly(vinylphenol)-<Emphasis Type="Italic">block</Emphasis>-polystyrene by α,ω-diamine

A poly(vinylphenol)-block-polystyrene diblock copolymer (PVPh-b-PSt) forms micelles in the presence of 1,4-butanediamine (BDA) in 1,4-dioxane, a nonselective solvent. The micellization proceeds through the formation of hydrogen bond cross-linking between the PVPh blocks via BDA, and the dissociation and reconstruction of the micelles is reversibly controlled by temperature. We explored the thermodynamics and kinetics on the micellization of the nonamphiphilic PVPh-b-PSt copolymer by BDA. Light scattering studies demonstrated that an equilibrium existed between the micelles and the unimers. The equilibrium constants were determined for the dissociation and the reconstruction of the micelles on the basis of variation in the aggregation number of the micelles. The equilibrium constant of the dissociation showed a good agreement with the reciprocal of the equilibrium constant of the reconstruction. Based on the equilibrium constants, the standard Gibbs energy, enthalpy, and entropy of the dissociation and reconstruction were estimated. The standard enthalpy was Δ H° = 30–40 kJ mol⁻¹ for the dissociation. The enthalpy of the reconstruction was obtained as a negative value, however, there was a negligible difference in the absolute values of Δ H° between the dissociation and the reconstruction. The rate constant of the micellization was ca. 10² times larger than the back reaction, and increased with a decrease in the temperature.     

Micelle formation induced by photo-Claisen rearrangement of poly(4-allyloxystyrene)-block-polystyrene

A novel micelle formation induced by the photo-Claisen rearrangement was attained using a poly(4-allyloxystyrene)-block-polystyrene (PASt-b-PSt) diblock copolymer. The photoreaction was performed in cyclohexane at room temperature without a catalyst. The conversion of the 4-allyloxystyrene units reached 90% by irradiation for 24 h. The photo-Claisen rearrangement of PASt-b-PSt into poly(3-allyl-4-hydroxystyrene)-block-PSt quantitatively proceeded up to a 20% conversion; however, the elimination of the allyl groups competitively occurred over the 20% conversion. The degrees of the photorearrangement and elimination showed good agreement in their material balance throughout the course of the reaction. Both of the photorearrangement and elimination finally reached ca. 50% degrees over 60% conversion. The light-scattering studies demonstrated that the PASt-b-PSt copolymer with a 36-nm hydrodynamic diameter as unimers formed micelles with a 98-nm diameter by irradiation.     

Reversible control of self-assembly of a diblock copolymer supporting Wittig reagent

The reversible control of self-assembly of a diblock copolymer supporting Wittig reagent was attained by changing the volume ratio of the mixed solvent. Poly(4-vinylbenzyltriphenylphosphonium chloride)-block-polystyrene (PPCl-b-PSt) self-assembled into micelles with the PPCl block cores in C₆H₆. The micelles were completely dissociated into unimers by the addition of CH₃CN at a 5/5 volume ratio of C₆H₆/CH₃CN. As a result of further increasing the CH₃CN, the reversed micelles with the PPCl block shells were produced. The copolymer served as the Wittig reagent for 9-anthracenecarboxaldehyde to produce a block copolymer with the pendent anthracene. The resulting copolymer also provided micelles in C₆H₆.     

Identification and determination of carboxylic acids in food samples using 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) as labeling reagent by HPLC with FLD and APCI/MS

A new labeling reagent for carboxylic acids, 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) has been designed and synthesized. It was used to label eight fatty acids (lauric acid, myristic acid, palmitic acid, stearic acid, arachidic acid, oleic acid, linoleic acid and linolenic acid) and four hydroxy pentacyclic triterpene acids (oleanolic acid, ursolic acid, betulinic acid and maslinic acid), successfully. APIETS could easily and quickly label carboxylic acids in the presence of K₂CO₃ catalyst at 85 °C for 35 min in N,N-dimethylformamide solvent. The carboxylic acids derivatives were separated on a C₈ reversed-phase column with gradient elution and fluorescence detection at λ_ex/λ_em = 315/435 nm. Identification of these derivatives was carried out by online mass spectrometry with atmospheric pressure chemical ionization in positive ion mode. The detection limits obtained were 13.37-30.26 fmol (signal-to-noise ratio of 3). The proposed method has been applied to the quantification of carboxylic acids in sultana raisin (Thompson seedless), hawthorn flake (Crataegus pinnatifida Bge.), Lycium barbarum seed oil and Microula sikkimensis seed oil with recoveries over 95.3%. It has been demonstrated that APIETS is a prominent labeling reagent for determining carboxylic acids with high performance liquid chromatography.     

Interaction of 3-amino-2-(isoxazol-3-yl)-4-methoxymethyl-6-methyl-thieno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridine with Raney nickel

3-Amino-2-(isoxazol-3-yl)-4-methoxymethyl-6-methylthieno[2,3-b]pyridine was synthesized by the reaction of 2(1H)-thioxopyridine-3-carbonitrile with 3-chloromethylisoxazole in the presence of two equivalents of KOH. Boiling of 3-amino-2-(isoxazol-3-yl)-4-methoxymethyl-6-meth-ylthieno[2,3-b]pyridine with Raney nickel results in 4-aminothieno[2,3-b;4,5-b′]dipyridine or 5-(4-amino-2-pyridyl)pyridine depending on the reaction conditions. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 669–670, March, 2008.     

4-Oxo-3,4-dihydroquinazolinyl- and Benzimidazolylacetonitriles in Annelation Reactions of a Haloquinoline Ring

The interaction of 4-oxo-3,4-dihydroquinazolinyl- and benzimidazolylacetonitriles with 2,6-dihalobenzaldehydes leads to 3-(2,6-dihalophenyl)-2-(4-oxo-3,4-dihydro-2-quinazolinyl)acrylonitriles and 2-(1H-benzo[d]imidazol-2-yl)-3-(2,6-dihalophenyl)acrylonitriles respectively. As a result of intramolecular cyclization of these nitriles 4-halo-12-oxo-12H-quino[2,1-b]quinazoline-6-carbonitriles and 4-halobenzo[4,5]imidazo[1,2-a]quinoline-6-carbonitriles respectively are formed.     

4-(3-Cyanopyridin-2-ylthio)acetoacetates in synthesis of heterocycles

Substituted 2-amino-4-aryl-3-cyano-5-oxo-5,6-dihydro-4H-pyrano[2,3-d]pyrido[3",2":4,5]thieno[3,2-b]pyridines were synthesized by the reactions of 4-hydroxy-1H-thieno[2,3-b;4,5-b]dipyridin-2-ones with arylidenemalononitriles or by the three-component reactions of hydroxythienodipyridinones with aldehydes and malononitrile in DMF in the presence of triethylamine. Methods for syntheses of substituted 3-alkoxycarbonyl-6-amino-4-aryl-2-(3-cyanopyridin-2-ylthiomethyl)-4H-pyrans were developed on the basis of the reactions of 4-(3-cyanopyridin-2-ylthio)acetoacetates and arylidenemalononitriles or aldehydes and malononitrile. Ethyl 4-(3-cyanopyridin-2-ylthio)acetoacetate and 4-methoxybenzylidenecyanothioacetamide were used for the synthesis of 6-(pyridin-2-ylthiomethyl)-3-cyanopyridine-2(1H)-thione.     

New synthetic approach to substituted isoindolo[2,1-a]quinoline carboxylic acids via intramolecular Diels-Alder reaction of 4-(N-furyl-2)-4-arylaminobutenes-1 with maleic anhydride

Acylation of substituted 4-(furyl-2)-4-arylaminobut-1-enes with maleic anhydride provided 2-allyl-6-carboxy-4-oxo-3-aza-10-oxatricyclo[5.2.1.0^1,5]dec-8-enes in high yield under mild reaction conditions. The Diels-Alder adducts are formed via an initial amide formation followed by a stereoselective intramolecular [4+2] exo-cycloaddition reaction. Treatment of the tricyclic compounds with phosphoric acid at high temperatures (70-120 °C) promoted cyclic ether opening, intramolecular cyclization and aromatization to give the corresponding tetracyclic compounds, 5,6,6a,11-tetrahydro-10-carboxyisoindolo[2,1-a]quinolines, in moderate yields. The influence of the acid and the reaction temperature on the cyclization reactions are also discussed.     

Synthesis of substituted benzoxazinylthieno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridines by the reaction of (3-cyanopyridin-2-ylthio)acetic acids or their amides with <Emphasis Type="Italic">o</Emphasis>-aminophenyl(diphenyl)carbinol

A general method for the synthesis of 3-amino-2-(4,4-diphenyl-4H-3,1-benzoxazin-2-yl)thieno[2,3-b]pyridines was proposed. The method involves reactions of (3-cyanopyridin-2-ylthio)acetic acids or their amides with o-aminophenyl(diphenyl)carbinol in nitromethane in the presence of perchloric acid followed by neutralization of the resulting salts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2759–2762, December, 2004.     

Determination of Free Fatty Acids in Bryophyte Plants and Soil by HPLC with Fluorescence Detection and Identification by Online MS

A method for the determination of long and short chain free fatty acids (FFAs), using 1-[2-(p-toluenesulfonate)-ethyl]-2-phenylimidazole-[4,5-f]-9,10-phenanthrene (TSPP) as labeling reagent, has been developed. Identification of FFA derivatives was carried out by HPLC-MS with atmospheric pressure chemical ionization (APCI) in positive ion mode. Gradient elution on an Agilent Eclipse XDB-C₈ column gave good separation of the derivatives. Excellent linear responses were observed and good compositional data could be obtained from as little as 200 mg of bryophyte plants and soil samples. Facile TSPP derivatization coupled with HPLC-APCI-MS analysis allowed the development of a highly sensitive method for the quantitative analysis of trace level of FFAs from biological and natural environmental samples.     

HPLC enantioseparation of phenylalanine analogs by application of (S)-N-(4-nitrophenoxycarbonyl)phenylalanine methoxyethyl ester as a new chiral derivatizing agent

Summary The indirect stereochemical resolution of the enantiomers of phenylalanine analogs was studied by high-performance liquid chromatographic methods. The resolution was performed by applying pre-column derivatization with (S)-N-(4-nitrophenoxycarbonyl)phenylalanine methoxyethyl ester, (S)-NIFE, as a new chiral derivatizing agent. Its applicability is demonstrated by the derivatization and separation of a series of ring-and α-methyl-substituted phenylalanines and phenylalanine amides, and especially by the derivatization of sterically hindered, less reactive α-methyl-substituted phenylalanine analogs. The diastereomeric, derivatives produced were separated by reversed-phase high-performance liquid, chromatography. The conditions of both derivatization and separation were optimized. The method described offers good enantioselectivity for various chiral amino compounds derived from chemo-enzymatic processes.     

Reaction of 6-methoxybenzo[b]furan-3(2H)-one and benzo[b]thiophen-3(2H)-one with 2-aryl-1,1-dicyanoethylenes as a convenient synthetic route to substituted 2-amino-4-aryl-1,3-dicyano-7-methoxydibenzo[b,d]furans and 2-amino-4-aryl-3-cyano-4H-benzothieno[3,2-b]pyrans

The reactions of 6-methoxybenzo[b]furan-3(2H)-one with 2-aryl-1,1-dicyanoethylenes and malononitrile or with aromatic aldehyde and two moles of malononitrile afford 2-amino-4-aryl-1,3-dicyano-7-methoxydibenzo[b,d]furans. The reactions of benzo[b]thiophen-3(2H)-one with 2-aryl-1,1-dicyanoethylenes or with aromatic aldehyde and one mole of malononitrile produce 2-amino-4-aryl-3-cyano-4H-benzothieno[3,2-b]pyrans.     

The Use of 4-(Bromomethylene)-5,5-dimethyl-1,3-dioxolan-2-one as “Masked” α-Bromo-α'-Hydroxy Ketone in the Synthesis of Heterocyclic Systems

4-(Bromomethylene)-5,5-dimethyl-1,3-dioxolan-2-one was obtained on the basis of the readily obtainable 4-methylene-5,5-dimethyl-1,3-dioxolan-2-one. It forms 2-imidazo[1,2-a]pyridin-2-yl-2-propanol with 2-aminopyridine, 11a-hydroxy-1,1-dimethyl-3-oxo-1,5,11,11a-tetrahydro[1,3]oxazolo[3,4-a]pyrido[1,2-d]-10-pyrazinium bromide with 2-(aminomethyl)pyridine, and the corresponding derivative of 4-hydroxyoxazolidin-2-one with 2-(3,4-dimethoxyphenyl)ethylamine. The last product was converted by intramolecular amidoalkylation without isolation into 10b-(bromomethyl)-8,9-dimethoxy-1,1-dimethyl-1,5,6,10b-tetrahydro[1,3]oxazolo[3,4-a]isoquinolin-3-one.