Addition of H2-D2 Mixtures to 2-Butyne and Norbornene Catalyzed by Solutions of Chlorotris(triphenylphosphine)rhodium(I), Hydridocarbonyltris(triphenylphosphine)rhodium(I), and Hydridotetrakis(5-phenyl-5-H-dibenzophosphole)rhodium(I)

The use of H₂/D₂ mixtures in place of H₂ as a probe of the mechanisms of hydrogenation is explored using the catalyst precursors chlorotris(triphenylphosphine)rhodium(I) (I), hydridocarbonyltris(triphenylphosphine) rhodium(I) (II), and hydridotetrakis(5-phenyl-5-H-dibenzophosphole)rhodium (I) (III). Benzene solutions of these complexes catalyze the H₂-D₂ equilibration, the relative rates decreasing in the order III > II > I. The accepted mechanism of hydrogenation catalyzed by I does not accommodate the observed isotopic exchange, which is inhibited by added acids (trifluoroethanol, 1,3,4-trichlorophenol) and accelerated by small amounts of triethylamine; the formation of hydridotris(triphenylphosphine)rhodium(I) is implicated. The H₂ and D₂ added to an unsaturated hydrocarbon is randomized with complexes II and III as the catalyst, whereas the molecular identity of H₂ and D₂ is retained if the dihydrido is the catalyst. __________ From Kinetika i Kataliz, Vol. 46, No. 6, 2005, pp. 891–900. Original English Text Copyright ? 2005 by Lin, Siegel. This article was submitted by the authors in English. The experiments were conducted at the University of Arkansas.     

Radiolysis in H2O/D2O mixtures. Hydrogen production under LOCA simulation

The hydrogen isotope radiolytic yields, G(H₂), G(HD) and G(D₂) were determined in H₂O/D₂O mixtures under chemical conditions close to a LOCA in a PHWR like Atucha I Nuclear Station, that is 2·10^–3 MH₃BO₃ and p(H+D)=8.5±0.2. The total hydrogen radiolytic yield G(H₂+HD+D₂) as a function of the deuterium atom fraction goes through a flat maximum at about 0.58. This result in dicates that the 4% flammability limit for hydrogen in the reactor's containment with be reached sooner than what is expected assuming a linear combination of pure H₂ and D₂ radiolytic yields. Hydrogen radiolytic production in 10^–3 M KBr in H₂O/D₂O mixtures gives the same results as in the boric solutions suggesting a bimolecular B(OH) ₄ ^– +OH reaction. Identical isotope concentration factors were calculated for both solutions.     

Stacking reactions of the borole complex Cp*Rh(η5-C4H4BPh) with the dicationic fragments [Cp*M]2+ (M = Rh or Ir)

The reaction of the (borole)rhodium iodide complex [(η-C₄H₄BPh)RhI]₄ with Cp^*Li afforded the sandwich compound Cp^*Rh(η-C₄H₄BPh) (4). The reactions of compound 4 with the solvated complexes [Cp^*M(MeNO₂)₃]²⁺(BF ₄ ⁻ )₂ gave triple-decker cationic complexes with the central borole ligand [Cp^*Rh(η-η⁵:η⁵-C₄H₄BPh)MCp^*]²⁺(BF ₄ ⁻ )₂ (M = Rh (5) or Ir (7)). The structure of complex 4 was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1525–1527, September, 2006.     

Hydrolyse acide du p-nitrophényl-diazométhane dans les mélanges H2O?D2O: analyse des effets isotopiques

The velocity of the hydrogen ion catalysed hydrolysis of p-nitrophenyl-diazo-methane (I) has been measured in H₂O? D₂O mixtures, giving an isotopic α_i = 0.49. The product isotope effect r = 5.1, determined from product analyses, combined with the (overall) solvent isotope effect k_H/k_D = 2.81, yields the primary kinetic isotope effect (k_H/k_D)^I = 3.8, and the secondary kinetic isotope effect (k_H/k_D)^II = 0.75. The CICH₂COOH-catalysed hydrolysis of I in H₂O? D₂O mixtures gave a straight-line plot of k_n/k_H versus the atomic fraction n of deuterium. With four carboxylic acids, as catalysts, values of about 4.3 for the kinetic (overall) isotope effects were observed.     

Freezing Point of Mixtures of H2 16O with H2 17O and Those of Aqueous CD3CH2OH and CH3 13CH2OH Solutions

The freezing point of mixtures of H₂ ¹⁶O with H₂ ¹⁷O was measured as a function of the molal concentration. The freezing points rose linearly with increasing molal concentration above that of pure ordinary water, H₂ ¹⁶O, at 273.15 K. This confirms Kiyosawa's previous conclusion [K. Kiyosawa, J. Solution Chem. 20, 583 (1991).], drawn from findings on changes in the freezing point of mixtures of H₂ ¹⁶O with H₂ ¹⁸O or D₂ ¹⁶O that even a difference in the number of neutrons in the hydrogen or oxygen atoms of water molecules makes them behave as different entities with respect to the colligative properties of solutions. This has been confirmed to also occur in mixtures of H₂ ¹⁶O with H₂ ¹⁷O.     

1,2,3,4,7-Pentamethylindenyl complex [(η5-C9H2Me5)RhI2]2 as a synthon for the [(η5-C9H2Me5)Rh]2+ fragment

The reaction of the iodide complex [(η⁵-C₉H₂Me₅)RhI₂]₂ (1) or the acetonitrile complex [(η⁵-C₉H₂Me₅)Rh(MeCN)₃]²⁺ with Tl[Tl(η-7,8-C₂B₉H₁₁)] afforded rhodacarborane (η⁵-C₉H₂Me₅)Rh(7,8-C₂B₉H₁₁) (2). The cationic triple-decker complex with the bridging boratabenzene ligand [Cp*Fe(μ-η:η-C₅H₃Me₂BMe)Rh(η⁵-C₉H₂Me₅)]²⁺ (3) was synthesized by the reaction of the nitromethane solvate [(η⁵-C₉H₂Me₅)Rh(MeNO₂)₃]²⁺ with the sandwich compound Cp*Fe(η-C₅H₃Me₂BMe). The structure of 2 was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1623–1625, August, 2008.     

Formation, structure, and reactivities of 1:1 adducts between quadricyclane and (η-cyclopentadienyl)(1,2-diphenyl- or -dimethoxycarbonyl-1,2-ethenedithiolato)rhodium(III)

The rhodiadithiolene complexes [Rh(Cp)(S₂C₂Z₂)] (Z=Ph (1a) and COOMe (1b)) reacted with quadricyclane (Q) to give 1:1 adducts [Rh(Cp)(S₂C₂Z₂) (C₇H₈)] (Z=Ph (2a) and COOMe (2b)) in which Rh and S of the complexes are bridged by C(7) (bridge carbons) and C(5) (edge carbons) of norbornene (C₇H₈), respectively. The structure of the adduct 2a was re-investigated and determined by X-ray structural analysis. The rhodiadithiolene complexes and those adducts showed the catalytic activities for the thermal isomerization from Q to norbornadiene (NBD). Adduct 2a photochemically dissociated to give the original complex 1a and NBD upon irradiation with a high-pressure mercury lamp. Skeletal rearrangements of the hydrocarbon moiety were confirmed in the formation of these adducts and in their photo-dissociation, according to deuterium labeling experiments.     

Mechanism of the thermal decomposition of (η5-C5H5)Fe(CO)2(η1-acenaphthenyl)

The complexes (η⁵-C₅H₅)Fe(CO)₂(η¹-acenaphthenyl) (I), (η⁵-C₅H₅)Fe(CO)₂ (η¹-trans-β-deuterioacenaphthenyl) (II), and (η-C₅D₅)Fe(CO)₂, (η¹-acenaphthenyl) (XIII) have been prepared and their thermal decomposition studied in vacuo and in refluxing toluene. All three complexes decompose to produce mixtures of acenaphthene (VII), acenaphthylene (VIII), and [C₅H₅Fe(CO)₂]₂ (VI). Biacenaphthenyl (IX) is also obtained from the thermolysis of I in toluene. The formation of alkene VIII, and, to a lesser extent, alkane VII is suppressed by external CO. Thermolysis of I in toluene-d₈ and of II in vacuo and in toluene produces deuterium-enriched VII. The acenaphthene generated from the decomposition of XIII also contains deuterium. The above observations are accomodated by a mechanistic scheme involving competing β-elimination, ironcarbon bond homolysis to produce the acenaphthenyl radical, and CpH abstraction by an undetermined pathway.     

Fourier transform-IR and 1H NMR studies on the structure of water solubilized by reverse aggregates of calcium bis(2-ethylhexyl) sulfosuccinate in organic solvents

The structure of water solubilized by reverse aggregates of calcium bis(2-ethylhexyl) sulfosuccinate in deuterobenzene and toluene has been probed by Fourier transform-IR and ¹H NMR spectroscopies. The ν_OD band of solubilized HOD (4% D₂O in H₂O) has been recorded as a function of the [water]/[surfactant] molar ratio, W/S. Curve fitting of this band showed the presence of a main peak at 2550 ± 13 cm⁻¹ and a small one at 2405 ± 15 cm⁻¹. As a function of increasing W/S, the frequency of the main peak decreases, its full width at half-height increases, and its area increases linearly. The ¹H NMR chemical shift of solubilized H₂O–D₂O mixtures at W/S = 18.1 has been measured as a function of the deuterium content of the aqueous nanodroplet. These data were used to calculate the so-called “fractionation factor” of the aggregate-solubilized water, the value of which was found to be unity. The results of both techniques show that reverse aggregate-solubilized water, although different from bulk water, does not seem to coexist in “layers” of different degrees of structure, as suggested, for example by the two-state water-solubilization model. Received: 12 July 1999/Accepted: 30 August 1999     

Mechanism of the expulsion of oh from the [M ? C2H4]+˙ ion from ethyl benzoate

Ion kinetic energy spectra of the esters C₆H₅C¹⁸OOC₂D₅ and C₆H₅COOC₂D₅ show that the ion formed by loss of C₂D₄ from the molecular ion has the deuterium atom attached to the carbonyl oxygen atom. Transfer of this deuterium to the other oxygen can only take place via exchange reactions involving the ortho-hydrogen atoms and requires at least two complete rotations of the side-chain.     

OH−-induced β-elimination reactions with 1-(2-Xethyl)-4-nitrobenzene substrates in solvent mixture H2O/CH3CN and H2O/DMSO: Reactivity and mechanism

The behaviour of 1-(2-bromoethyl) 4-nitrobenzene (1), N,N,N-triethyl-2-(4-nitrophenyl)ethanaminium bromide (2) and N,N-diethyl-N-[2-(4-nitrophenyl)ethyl]octan-1-aminium bromide (3) in the OH⁻-induced elimination reactions with formation of 1-nitro-4-vinylbenzene in mixtures of DMSO/H₂O or CH₃CN/H₂O has been investigated. With all three substrates an increase in dipolar aprotic solvent content implies a limited increase of the second-order rate constant k _OH up to ≅605, and then an exponential increase is observed. The variation of activation parameters ΔH ^# and dGS ^#, measured in DMSO/H₂O mixtures, is parallel for 1 and 2. This similar behaviour of 1 and 2 with respect to variation in solvent composition is evidence that it is not possible to use this technique of solvent effect for the mechanistic diagnosis of elimination reactions.     

Determination of H2 and D2 content in metals and alloys using hot vacuum extraction

A hot vacuum extraction technique for the determination of hydrogen in metal and alloy samples has been standardised. After measuring the total pressure of the evolved gases, individual hydrogen and deuterium intensities are measured using an on-line quadrupole mass spectrometer. Synthetic mixtures of H₂ and D₂, in known concentrations, have been analysed by QMS and an analytical expression correlating the measured [D₂]/[HD] intensity ratio with the mole fraction of deuterium in the synthetic mixture has been arrived at. The precision and accuracy in the measurement of hydrogen is about 10% at 50 ppmw level.     

Synthesis characterization and hydroformylation activity of new mononuclear rhodium(I) compounds incorporated with polar-group functionalized phosphines

A first effort employing a range of polar-group functionalized phosphines (L ₁ –L ₇ ) to design mononuclear Rh(I) compounds of [Rh(quin-8-O)(CO)(L)] (quin-8-O = 8-hydroxy quinolate) is described. The reaction of a Rh(I) precursor [Rh(μ-Cl)(CO)₂]₂ with 8-hydroxyquinoline in the presence of a base followed by phosphines (L ₁ –L ₇ ) produced only a single isomer of [Rh(quin-8-O)(CO)(L)] compounds (1–7) with pendant, i.e. non-bonded, polar-groups (includes carboxyl, hydroxyl and formyl). A relationship between Δgd³¹P chemical shifts and the ν(C≡O) was derived to evaluate and explain the σ-donor properties of these phosphines with respect to the electronic properties of the polar groups and the extent of π-back-bonding to the CO group. These mononuclear Rh(I)-Phosphines were investigated as catalysts in the hydroformylation of 1-hexene and cyclohexene in aqueous two-phase and single-phase solvent systems. The Rh(I) catalysts with strong σ-donor and hydrophilic phosphines provided better yields and selectivities for the hydroformylation products, which is a reverse trend compared to literature reports. When the Rh(I) compounds contained strong σ-donor phosphines, the π-acceptor properties of the pyridine ring of 8-hydroxyquinolate were found to be beneficial for the facile cleavage of the CO group during hydroformylation, and additionally, to improve the kinetic stability of catalysts.     

An electrochemical investigation on the reduction path of the arene complexes [CpM(arene)]2+ and [(η-9-SMe2-7,8-C2B9H10)M(arene)]2+ (M=Rh, Ir)

The reduction behavior of the isoelectronic complexes [CpM^III(η⁶-C₆R₆)]²⁺ (M=Rh, Ir; R=H, Me) and [(η-9-SMe₂-7,8-C₂B₉H₁₀)M^III(η⁶-C₆R₆)]²⁺ (M=Rh, Ir; C₆R₆ = C₆H₆, C₆H₅OMe, C₆H₃Me₃) has been studied by cyclic voltammetry and controlled potential coulometry in acetonitrile and propylene carbonate at 253 and 298 K, respectively. The extent of chemical reversibility of the pertinent sequences Rh(III)/Rh(II)/Rh(I) and Ir(III)/Ir(I) is highly dependent on both the nature of the solvent and the intrinsic electronic properties of the arene substituents. The arene η⁶ coordination makes the derivatives in their lower oxidation states notably short lived, even if, in some cases, the use of propylene carbonate improves their stability or causes the increase in their lifetimes before changing the arene coordination from η⁶ to η⁴. Cations [(η-9-SMe₂-7,8-C₂B₉H₁₀)M(η⁶-C₆R₆)]²⁺ were obtained by the bromide abstraction from [(η-9-SMe₂-7,8-C₂B₉H₁₀)MBr₂]₂ with Ag⁺ in the presence of benzene and its derivatives. The structure of [(η-9-SMe₂-7,8-C₂B₉H₁₀)Ir(η⁶-C₆H₅OMe)](BF₄)₂ was determined by X-ray diffraction.     

A new versatile binuclear seven-coordinate complex of molybdenum(II), [(μ-Cl)2{Mo(μ-Cl)(SnCl3)(CO)3}2]

The two new seven-coordinate anionic complexes of molybdenum(II), binuclear [(μ-Cl)₂{Mo(μ-Cl)(SnCl₃)(CO)₃}₂]²⁻ and mononuclear [MoCl₃(GeCl₃)(CO)₃]²⁻, have been synthesized and characterized by single-crystal X-ray diffraction studies. The binuclear complex exhibits a unique mode of reactivity towards norbornene. In a strictly anhydrous atmosphere the binuclear complex effectively initiates the ring-opening metathesis polymerization reaction of norbornene, but in the presence of water norbornene is efficiently transformed to the binorbornyl ether (C₇H₁₁)₂O.     

Isotope effect in the formation of hydrogen peroxide by the sonolysis of light and heavy water

The kinetics of the formation of hydrogen peroxide by the sonolysis of light and heavy water in argon and oxygen atmospheres was investigated. The sonochemical reaction has a zero order with respect to hydrogen peroxide (H₂O₂, D₂O₂, or DHO₂). The measurement of the kinetic isotope effect (α), defined as the ratio of the reaction rates in H₂O and D₂O, carried out under argon gave a value of 2.2±0.3. The observed isotope effect decreases with an increase in the concentration of light water in H₂O−D₂O mixtures. No isotope effect is displayed in the oxygen atmosphere (α=1.05±0.10). The isotope effect is determined presumably by the mechanism of sonochemical decomposition of water molecules, which includes the H₂O−Ar^* and D₂O−Ar^* energy exchange (where Ar^* are argon atoms in the³P_2.0 excited state) in the nonequilibrium plasma generated by a shock wave, arising upon a cavitation collapse. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 645–649, April, 2000.     

Effect of solvent on the exchange of ethylene for propylene on cis-PtCl2(C3H6)(TPPTS), TPPTS = P(m-C6H4SO3Na)3

To further understand the effect of water as a solvent in organometallic reactions, the lability of η²-alkenes coordinated to platinum(II) phosphine complexes has been studied in water and chloroform as a comparison of solvent effects on the exchange kinetics and alkene complex stability. ¹H NMR techniques with both deuterated chloroform and a deuterium oxide/deuterated methanol mixture as solvent systems were used at temperatures as low as ?50°C. Reaction of cis-PtCl₂L(η²-C₃H₆) [L?=?PPh₃ (triphenylphosphine) (1a), TPPTS (tris(m-sulfonatophenyl)phosphine) 1b] with ethylene to form cis-PtCl₂L(η²-C₂H₄) (2?a, b) was observed with dependence on the rate by starting platinum complex and ethylene. The role of water on this reaction, as well as its effect on the equilibrium, will be discussed. The equilibrium constant shows preference for coordination of ethylene and the temperature dependence indicates the reaction is entropy controlled.     

Allyl isomerization mediated by cyclopentadienyl ruthenium carbonyl compounds

Three new diruthenium complexes, namely (η ⁵-C₅H₄C(CH₂)₄CH=CHCH₃)₂Ru₂(CO)₂(μ-CO)₂ (1), (η ⁵-C₅H₄CEt₂CH=CHCH₃)₂Ru₂(CO)₂(μ-CO)₂ (2), and (η ⁵-C₅Me₄CH=CHCH₃)₂Ru₂(CO)₂(μ-CO)₂ (3), were synthesized and characterized by elemental analysis, IR and ¹H-NMR spectra. The crystal structures of complexes 1 and 2 were determined by X-ray single-crystal diffraction and showed that the allyl reagents used in their synthesis underwent isomerization to give the corresponding methyl–vinyl complexes. The X-ray crystal structures of complexes 1 and 2 confirm the presence of both bridging and terminal CO groups. A possible mechanism for the observed alkene isomerizations is discussed.     

Synthesis and structural characterization of ethylene–norbornene copolymer with high norbornene content catalyzed by β-diketiminato nickel/methylaluminoxane

Ethylene–norbornene (E–N) copolymerizations were carried out by using β-diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6-ⁱPr₂C₆H₃, 1; Ar = 2,6-Me₂C₆H₃, 2) in the presence of methylaluminoxane (MAO). Complex 1 bearing bulky isopropyl ortho substituents showed higher activity than 2 for the E–N copolymerization. The activity of the catalytic systems increased with increasing the feed ratio of norbornene/ethylene (N/E), and gave the E–N copolymers with high norbornene content more than 75 mol%. In the microstructures of copolymers generated with the catalytic systems, norbornene microblocks with a length of two or three norbornene units have been detected. Results have shown that the activity and the content of norbornene in copolymer depend on the N/E feed ratio.     

Mechanism of the reduction of molecular nitrogen to hydrazine by niobium (iii) hydroxide

The effect of the concentration of water on the rate of reduction of molecular nitrogen to hydrazine by niobium(iii) hydroxide in alkaline H₂O−MeOH and D₂O−MeOD mixtures was studied. In both cases, the reaction rate is maximum when [H₂O]=4 mol L⁻¹, and the inverse isotopic effect (K ^D/k ^H>1) is observed when [H₂O]<20 mol L⁻¹. Similar regularity was observed for the reaction of hydrogen elimination. It was found that HD is formed in the H₂O−MeOH system in the presence of D₂. The conclusion was made that the ratedetermining stage in hydrazine formation is the transfer of a hydride ion to the dinitrogen molecule coordinated to the binuclear Nb^III center. A kinetic scheme satisfactorily explaining the effect of the concentration of water ([H₂O]=1.5−49.0 mol L⁻¹) on the reaction rate constant was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1600–1604, September, 1997.