A compact graphene Q-switched erbium-doped fiber laser using optical circulator and tunable fiber Bragg grating

We demonstrate a passively Q-switched tunable erbium-doped fiber laser(EDFL)based on graphene as a saturable absorber(SA).A three-port optical circulator(OC)and a strain-induced tunable fiber Bragg grating(TFBG)are used as the two end mirrors in an all-fiber linear cavity.The Q-switched EDFL has a low pump threshold of 23.8 mW.The pulse repetition rate of the fiber laser can be widely changed from 9.3 kHz to 69.7 kHz by increasing the pump power from23.8 mW to 219.9 mW.The minimum pulse duration is 1.7μs and the highest pulse energy is 25.4 nJ.The emission wavelength of the laser can be tuned from 1560.43 nm to 1566.27 nm by changing the central wavelength of the straininduced TFBG.     

Nanosecond Pulse Generation with Silver Nanoparticle Saturable Absorber

Nanosecond pulse generation in an erbium-doped fiber laser (EDFL) passively mode-locked by a silver nanoparticle(SNP)-based saturable absorber(SA) is experimentally demonstrated. The SA is fabricated by depositing a nanosized SNP layer onto the surface of polyvinyl alcohol film through the thermal evaporation process. By inserting the SA into an EDFL cavity, stable mode-locked operation is achieved at 1561.5 nm with the maximum pulse energy up to 52.3 nJ. The laser operates at a pulse repetition frequency of 1.0 MHz with a pulse width of 202 ns. These results suggest that SNPs could be developed as an effective SA for mode-locking pulse generation.     

Zinc-oxide/PDMS-clad tapered fiber saturable absorber for passively mode-locked erbium-doped fiber laser

We propose and demonstrate a passively mode-locked erbium-doped fiber laser(EDFL) based on zincoxide/polydimethylsiloxane(Zn O/PDMS) saturable absorber(SA) that evanescently interacts with the light on a tapered fiber. The Zn O/PDMS composite is coated on the whole surface of the tapered fiber to guarantee the maximum efficiency of the SA device, with a measured insertion loss of 0.87 d B and a modulation depth of 6.4%. The proposed laser can generate soliton mode-locking operation at a threshold power of 33.07 m W. The generated output pulse yields a repetition rate and pulse width of 9.77 MHz and 1.03 ps, respectively. These results indicate that the proposed Zn O/PDMS-clad tapered fiber could be useful as an efficient, compatible, and low-cost SA device for ultrafast laser applications.     

All-fiber polarization locked vector soliton laser using carbon nanotubes

We report an all-fiber mode-locked erbium-doped fiber laser (EDFL) employing carbon nanotube (CNT) polymer composite film. By using only standard telecom grade components, without any complex polarization control elements in the laser cavity, we have demonstrated polarization locked vector solitons generation with duration of ~583 fs, average power of ~3 mW (pulse energy of 118 pJ) at the repetition rate of ~25.7 MHz.     

Mode-locked fiber laser with a manganese-doped cadmium selenide saturable absorber

We demonstrate the generation of mode-locked pulses in an erbium-doped fiber laser(EDFL) by using a new manganese-doped cadmium selenide quantum-dots-based saturable absorber. The laser produces a soliton pulse train operating at 1561.1 nm with a repetition rate of 1 MHz, as the pump power is varied from 113 to 250 m W.At the maximum pump power, we obtain the pulse duration of 459 ns with a signal-to-noise ratio of 50 dB.     

Erbium-Doped Zirconia-Alumina Silica Glass-Based Fiber as a Saturable Absorber for High Repetition Rate Q-Switched All-Fiber Laser Generation

We propose and demonstrate a Q-switched erbium-doped fiber laser(EDFL) using an erbium-doped zirconiaalumina silica glass-based fiber(Zr-EDF) as a saturable absorber. As a 16-cm-long Zr-EDF is incorporated into a ring EDFL cavity, a stable Q-switching pulse train operating at 1565 nm wavelength is successfully obtained.The repetition rate is tunable from 33.97 kHz to 71.23 kHz by increasing the pump power from the threshold of 26 mW to the maximum of 74 mW. The highest pulse energy of 26.67 nJ is obtained at the maximum pump power.     

基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器

报道了一种基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器.该激光器采用环形腔结构,利用自制的三层石墨烯薄膜作为可饱和吸收体实现锁模.同时在腔内插入一个窄带光纤光栅,约束腔内起振的纵模数,适当调节抽运功率和偏振控制器的角度,得到了重复频率为3.8 MHz、脉宽在3.8—94.3 ns之间灵活可调的2μm纳秒锁模脉冲输出,整个脉宽调节范围超过90 ns.此外,由于获得的兆赫兹纳秒锁模脉冲时间带宽积在49—1119范围内,即存在强烈的啁啾,因而可作为2μm波段啁啾脉冲放大系统中的种子源使用.     

Carboxyl graphene oxide solution saturable absorber for femtosecond mode-locked erbium-doped fiber laser

The carboxyl-functionalized graphene oxide(GO-COOH) is a kind of unique two-dimensional(2 D) material and possesses excellent nonlinear saturable absorption property and high water-solubility. In this paper, we prepare saturable absorber(SA) device by depositing GO-COOH nanosheets aqueous solution on a D-shaped fiber. The modulation depth(MD) and saturable intensity of the SA are measured to be 9.6% and 19 MW/cm~2, respectively. By inserting the SA into the erbium-doped fiber(EDF) laser, a passively mode-locked EDF laser has been achieved with the spectrum center wavelength of 1562.76 nm. The pulse duration, repetition rate, and the signal-to-noise ratio(SNR) are 500 fs, 14.79 MHz, and 80 dB,respectively. The maximum average output power is measured to be 3.85 mW. These results indicate that the GO-COOH nanosheets SA can be used as a promising mode locker for the generation of ultrashort pulses.     

基于氧化石墨烯的瓦级调Q锁模Tm:LuAG激光器

在Tm:LuAG全固态激光器中实现了以氧化石墨烯可饱和吸收体为锁模启动元件的瓦级被动调Q锁模运转.本实验装置以可调谐掺钛蓝宝石激光器作为泵浦源,测得Tm:LuAG固态激光器出光阈值最低为325mW,当吸收抽运功率达到3420 mW时,进入稳定的调Q锁模运行状态.当抽运功率达到8.1 W时,对应的最大输出功率为1740 mW,中心波长为2023 nm,重复频率为104.2 MHz,最大单脉冲能量为16.7 nJ,调制深度接近100%.     

Nanosecond Pulses Generation with Samarium Oxide Film Saturable Absorber

Nanosecond pulse generation is demonstrated in a mode-locked erbium-doped fiber laser(EDFL) utilizing a samarium oxide(Sm_2O_3) film. The Sm_2O_3 film exhibits a modulation depth of 33%, which is suitable for modelocking operation. The passively pulsed EDFL operates stably at 1569.8 nm within a pumping power from 109 to 146 m W. The train of generated output pulses has a pulse width of 356 nm repeated at a fundamental frequency of 0.97 MHz. The average output power of 3.91 m W is obtained at a pump power of 146 m W, corresponding to 4.0 nJ pulse energy. The experimental result indicates that the proposed Sm_2O_3 saturable absorber is viable for the construction of a flexible and reliably stable mode-locked pulsed fiber laser operating in the 1.5 m region.     

Passively harmonic mode-locked erbium-doped fiber laser at a 580 MHz repetition rate based on carbon nanotubes film

We propose and demonstrate a passively harmonic mode-locked erbium-doped fiber laser(EDFL) using carbon nanotubes polyvinyl alcohol(CNTs-PVA) film. The laser allows generation of the pulses with a repetition rate of 580 MHz, which corresponds to the 22nd harmonics of a 26.3 MHz fundamental repetition rate under 323 mW pump power. A particularly noteworthy feature of the pulses is the super-mode suppression ratio(SMSR), which is over 40 dB, indicating a stable operation.     

Passively Q-Switched and mode-locked Nd:YVO<Subscript>4</Subscript> laser with sandwich structured wallpaper graphene oxide absorber

We report on a passively Q-switched and mode-locked Nd:YVO₄ laser using a novel low-cost wall-paper graphene oxide absorber. Sandwich structured wallpaper graphene oxide absorber was constructed by a high transmission mirror, a piece of wallpaper graphene oxide absorber and a reflective mirror. The average output power of 310 mW of passively Q-switched and mode-locked laser was successfully achieved. The repetition rate and pulse width of the Q-switched envelope were 213 kHz and 770 ns, respectively. The repetition rate of passively mode-locked pulse within the Q-switched envelope was 81.3 MHz with the pulse energy of 3.8 nJ.     

宽光谱全正色散锁模掺镱光纤激光器

介绍了一种全正色散宽光谱被动锁模掺镱光纤激光器,利用非线性偏振旋转技术实现全正色散掺镱光纤激光器的被动锁模.当泵浦功率输出为500mW时,激光脉冲输出功率大于139mW,重复频率约为28.1MHz,脉冲宽度为3.8ps.为了进一步研究全正色散光纤激光器的宽光谱输出特性,在腔内熔接50m单模光纤,同时去除双折射滤波片,在泵浦功率为500mW时,观察到稳定锁模单脉冲耗散孤子,光谱范围为1 005~1 140nm,输出激光脉冲最大平均功率为90mW,重复频率为3.58MHz,脉冲宽度为519ps.     

Experimental Observation of Bright and Dark Solitons Mode-Locked with Zirconia-Based Erbium-Doped Fiber Laser

We demonstrate the generation of dark and bright solitons with our homemade zirconia-based erbium-doped fiber and graphene oxide(GO) saturable absorber in anomalous dispersion region.The GO is fabricated using an abridged Hummer's method,which is combined with polyethylene oxide to produce a composite film.The film is sandwiched between two optical ferrules and embedded in the laser cavity to enhance its birefringence and nonlinearity.The self-starting bright soliton is easily generated at pump power of 78 mW with the whole length cavity of 14.7 m.The laser produces the bright pulse train with repetition rate,pulse width,pulse energy and central wavelength being 13.9 MHz,0.6 ps,2.74 p J and 1577.46 nm,respectively.Then,by adding the 10 m of single mode fiber into the laser cavity,dark soliton pulse is produced.For the formation of dark pulse train,the measured repetition rate,pulse width,pulse energy and central wavelength are 8.3 MHz,20 ns and 4.98 p J and1596.82 nm,respectively.Both pulses operate in the anomalous region.     

Mode-Locked Erbium-Doped Fiber Laser Using Vanadium Oxide as Saturable Absorber

A mode-locked erbium doped fiber laser(EDFL) is demonstrated using the vanadium oxide(V_2O_5) material as a saturable absorber(SA). The V_2O_5 based SA is hosted into poly ethylene oxide film and attached on fiber ferule in the laser cavity. It shows 7% modulation depth with 71 MW/cm~2 saturation intensity. By incorporating the SA inside the EDFL cavity with managed intra-cavity dispersion, ultrashort soliton pulses are successfully generated with a full width at half maximum of 3.14 ps. The laser operated at central wavelength of 1559.25 nm and repetition frequency of 1 MHz.     

Nanosecond-pulsed erbium-doped fiber lasers with graphene saturable absorber

We demonstrate graphene mode-locked nanosecond erbium-doped fiber laser in an all-fiber ring cavity. The clean and robust pulse train was generated at 27 mW pump power. Resultant central wavelength, repetition rate and pulse width was 1560 nm, 388 kHz and 6 ns, respectively. With two stage fiber amplifier, the output power was 553 mW, corresponding to single pulse energy of 1.4 μJ. In addition, the pulse-width can be varied ranging from 3 ns to 20 ns at repetition rate between 200 kHz and 1.54 MHz by changing the length of the laser cavity.     

氧化石墨烯被动调Q掺铒光纤激光器

报道了基于氧化石墨烯的被动调Q掺铒光纤激光器。激光器采用环形腔结构,调Q器件为自制的氧化石墨烯可饱和吸收镜。泵浦功率在81~505 mW范围内时,得到了重复频率68~124 kHz的稳定的调Q脉冲输出,脉宽为0.47~1.60 s。由于泵浦功率限制,激光器最大输出功率为10 mW, 相应单脉冲能量为80.6 nJ。此种基于氧化石墨烯可饱和吸收体的被动调Q光纤激光器体积小、成本低廉、结构简单、稳定性高、光束质量高,具有广阔的应用前景。     

Highly efficient reduced graphene oxide mode-locked Nd:GGG laser

We report, for the first time to our knowledge, a diode-end-pumped passively mode-locked(ML) Nd-doped gadolinium gallium garnet laser based on a chemically reduced graphene oxide(RGO) saturable absorber mirror. The ML laser gives a pulse duration of 15.1 ps under the maximum average output power of 1.44 W, corresponding to a slope efficiency of 21.1%. The single-pulse energy and peak power are 21.6 n J and 1.43 k W, respectively. The results indicate that our RGO saturable absorber has promising prospects for applications in high-power and high-efficiency ultrafast lasers.     

Graphene oxide-COOH as a new saturable absorber for both Q-switching and mode-locking fiber lasers

Graphene oxide carboxylic acid(COOH), a novel two-dimensional(2D) layered material with its unique optical and electronic properties, is discovered to exhibit the saturation of optical absorption under laser illumination.Applying the liquid-phase exfoliation method, we prepare graphene oxide-COOH dispersions with deionized water and fabricate graphene oxide-COOH polyvinyl alcohol polymer composite film. We further obtain stable Q-switching pulse and mode-locked laser operation with a 22.7 MHz repetition rate and a 1.5 ps pulse duration by incorporating the graphene oxide-COOH-based saturable absorbers into the all-fiber erbium-doped fiber laser cavity. The experimental results show that the proposed graphene oxide-COOH material can act as an effective absorber for pulsed fiber lasers, which demonstrate potential applications in the area of ultrafast optics.     

Figure-eight actively-passively mode-locked erbium-doped fiber laser

The advantages of using nonlinear optical loop mirror (NOLM) to compress pulse with slight amplitude fluctuation and reflected energy loss are analyzed in theory. Experimentally the NOLM is placed in an actively mode-locked erbium-doped fiber ring laser to form a figure-eight actively and passively mode-locked fiber laser. 12 ps mode-locked pulses centered at 1.543 μm were obtained with the modulation frequency of 2.498748700 GHz. 3.715 mW output power is achieved with 50 mW pump power.