Effect of pressure work on free convection flow along a vertical circular cone with suction and variable surface temperature

Free convection laminar flow from a vertical circular cone maintained a variable surface temperature with suction and pressure work effects has been investigated. The governing boundary layer equations are transformed into a non-dimensional form and the resulting nonlinear system of partial differential equations are reduced to local non-similarity equations. The governing non-similarity equations are then solved numerically by implicit finite difference method together with Keller box scheme. Numerical results are presented in terms of velocity and temperature profiles of the fluid as well as the local skin-friction coefficients and the local heat transfer rate for different values of Prandtl number Pr, suction parameter ξ, temperature gradient parameter n and the pressure work parameter ∈. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hydrodynamic and thermal slip flow boundary layers over a flat plate with constant heat flux boundary condition

In this paper the boundary layer flow over a flat plat with slip flow and constant heat flux surface condition is studied. Because the plate surface temperature varies along the x direction, the momentum and energy equations are coupled due to the presence of the temperature gradient along the plate surface. This coupling, which is due to the presence of the thermal jump term in Maxwell slip condition, renders the momentum and energy equations non-similar. As a preliminary study, this paper ignores this coupling due to thermal jump condition so that the self-similar nature of the equations is preserved. Even this fundamental problem for the case of a constant heat flux boundary condition has remained unexplored in the literature. It was therefore chosen for study in this paper. For the hydrodynamic boundary layer, velocity and shear stress distributions are presented for a range of values of the parameter characterizing the slip flow. This slip parameter is a function of the local Reynolds number, the local Knudsen number, and the tangential momentum accommodation coefficient representing the fraction of the molecules reflected diffusively at the surface. As the slip parameter increases, the slip velocity increases and the wall shear stress decreases. These results confirm the conclusions reached in other recent studies. The energy equation is solved to determine the temperature distribution in the thermal boundary layer for a range of values for both the slip parameter as well as the fluid Prandtl number. The increase in Prandtl number and/or the slip parameter reduces the dimensionless surface temperature. The actual surface temperature at any location of x is a function of the local Knudsen number, the local Reynolds number, the momentum accommodation coefficient, Prandtl number, other flow properties, and the applied heat flux.     

The effect of variable viscosity on MHD viscoelastic fluid flow and heat transfer over a stretching sheet

An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.     

Effects of hall current and heat transfer on MHD flow of a Burgers’ fluid due to a pull of eccentric rotating disks

The effect of Hall current and heat transfer on the magnetohydrodynamics (MHD) flow of an electrically conducting, incompressible Burgers’ fluid between two infinite disks rotating about non-coaxial axes perpendicular to the disks is studied. The flow is due to a pull with constant velocities of eccentric rotating infinite disks and an external uniform magnetic field normal to the disks is applied. Exact solutions are obtained for the governing momentum and energy equations. The effects of Hartmann number M, Prandtl number Pr, Eckert number Ec and Hall parameter η are studied.     

Couette flow with transpiration cooling when the viscosity of the fluid depends on temperature

The Couette flow between two parallel porous flat plates for temperature dependent viscosity, with fluid injection at the stationary plate and its corresponding removal through the moving plate has been studied. An empirical relation between viscosity and temperature, based on the experimental results of Prandtl, is taken. The coupled differential equations of the velocity and temperature fields have been solved with the help of a power series in the injection parameter λ. Expressions for shearing stress, velocity and temperature fields and for Nusselt number are obtained for small values of λ.     

传导-辐射和磁流体组合对磁化可渗透平板自然对流影响的数值解法

研究粘性、不可压缩、导电流体,在磁化可渗透竖直平板上作自然对流时,数值地分析辐射和磁流体组合的影响.采用两种方法数值地求解非相似的控制方程:1)对所有吸入参数值ξ,采用有限差分法;2)为小数值和大数值的吸入参数值ξ,分别建立起级数的渐近解.用图形和列表形式,给出Prandtl数Pr,磁Prandtl数Pm,磁力参数S,辐射参数Rd,壁面温度θw的变化,对壁面摩擦因数、热交换率和电流密度的影响.最后分析上述物理参数对速度分布、温度分布和磁场横向分量的影响.     

热幅射对抽吸或喷射三维Couette流温度分布的影响

在固定的底板上有横向正弦射流,而匀速运动的多孔介质顶板以常速率完全抽出的情况下,理论分析了热幅射对三维Couette流动温度分布的影响.在这种射流速度下,流动呈现三维流动.利用图形分析了Prandtl数、幅射参数和射流参数对传热速率的影响.Prandtl数对温度分布的影响比射流参数或幅射参数大得多.     

On the flow of an electrically conducting,incompressible fluid near an accelerated plate in the presence of a parallel plate,under transverse magnetic field

This paper deals with hydromagnetic flow of an electrically conducting, incompressible viscous fluid near an accelerated flat, non-conducting plate, in the presence of another parallel plate, when there is a transversely applied magnetic field. Induced magnetic field is neglected in comparison with the applied magnetic field. Laplace transform techniques are used. The equations are integrated by applying residue principle, and expressions for velocity profiles and skin-friction at both plates are derived for different values of Hartmann number M. It is observed that, with the increase of the value of the Hartmann number M, the velocity profiles are flattened, the shear stress at the stationary plate decreases, as the value of the time T and Hartmann number M increases, but the shear stress at the accelerated plate increases directly in proportion with the increase in time and Hartmann number.     

Flow,heat, and species transfer over a stretching plate considering coupled Stefan blowing effects from species transfer

In this paper, we investigate the flow, heat and mass transfer of a viscous fluid flow over a stretching sheet by including the blowing effects of mass transfer under high flux conditions. Mass transfer in this work means species transfer and is different from mass transpiration for permeable walls. The new contribution from this work is, for the first time, to consider the coupled blowing effects from massive species transfer on flow, heat, and species transfer for a stretching plate. Based on the exact solutions of the momentum equations, which are valid for the whole Navier–Stokes equations, the energy and mass transfer equations are solved exactly and the effects of the blowing parameter, the Schmidt number, and the Prandtl number on the flow, heat and mass transfer are presented and discussed. The solution is given in terms of an incomplete Gamma function. It is found the coupled blowing effects due to mass transfer can have significant influences on velocity profiles, drag, heat flux, as well as temperature and concentration profiles. These solutions provide rare results with closed form analytical expressions and can be used as benchmark problem for numerical code validation.     

Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Lie group analysis of unsteady MHD three dimensional by natural convection from an inclined stretching surface saturated porous medium

Lie group method is investigated for solving the problem of heat transfer in an unsteady, three-dimensional, laminar, boundary-layer flow of a viscous, incompressible and electrically conducting fluid over inclined permeable surface embedded in porous medium in the presence of a uniform magnetic field and heat generation/absorption effects. A uniform magnetic field is applied in the y-direction and a generalized flow model is presented to include the effects of the macroscopic viscous term and the microscopic permeability of porous medium. The infinitesimal generators accepted by the equations are calculated and the extension of the Lie algebra for the problem is also presented. The restrictions imposed by the boundary conditions on the generators are calculated. The investigation of the three-independent-variable partial differential equations is converted into a two-independent-variable system by using one subgroup of the general group. The resulting equations are solved numerically with the perturbation solution for various times. Velocity, temperature and pressure profiles, surface shear stresses, and wall-heat transfer rate are discussed for various values of Prandtl number, Hartmann number, Darcy number, heat generation/absorption coefficient, and surface mass-transfer coefficient.     

Effect of sudden suction on the hydromagnetic natural convection from a vertical plate

The effects of step function change in suction velocity are investigated for a natural convection flow from a vertical porous flat plate of infinite length in the presence of transverse magnetic field for two cases namely (i) when the plate is suddenly raised to a uniform higher temperature, (ii) when the plate suddenly begins to generate a uniform heat flux at its surface. In (i) the coefficient of heat transfer becomes independent of the Hartmann numberM. In either case for a fixed time t except for correct steady state t→ ∞, the effect of the Hartmann number is to decrease both the velocity of the fluid and the skin-friction at the plate. In the correct steady state the velocity field and the skin-fiiction become independent of the Hartmann number.     

On the hydromagnetic flow between two parallel,porous plates

This paper deals with the two-dimensional unsteady flow of a conducting viscous incompressible fluid between two parallel, porous plates, one of which is fixed, while the other is uniformly accelerated, when there is a transverse magnetic field. It is shown that, for a given Hartmann number M, as suction parameter β increases, the velocity at any point of the fluid increases, the Skin friction at the stationary plate increases, while that at the accelerated plate decreases. The results are true, as time T increases, for given Hartmann number M and the suction parameter β. The results also hold good for a given β, as M increases when the magnetic lines of force are fixed relative to the plate, while they are just opposite for the magnetic lines of force fixed relative to the fluid.     

Natural convection boundary layer flow of fluid with temperature-dependent viscosity from a horizontal elliptical cylinder with constant surface heat flux

This study deals with the temperature-dependent viscosity effects on the natural convection boundary layer on a horizontal elliptical cylinder with constant surface heat flux. The mathematical problem is reduced to a pair of coupled partial differential equations for the temperature and the stream function, and the resulting nonlinear equations are solved numerically by cubic spline collocation method. Results for the heat transfer characteristics are presented as functions of eccentric angle for various values of viscosity variation parameters, Prandtl numbers and aspect ratios. Results show that an increase in the viscosity variation parameter tends to accelerate the fluid flow near the surface and increase the maximum velocity, thus decreasing the velocity boundary layer thickness. As the viscosity variation parameter is increased, the surface temperature tends to decrease, thus increasing the local Nusselt number. Moreover, the local Nusselt number of the elliptical cylinder increases as the Prandtl number of the fluid is increased.     

Stagnation point flow of dusty Casson fluid with thermal radiation and buoyancy effects

The aim of the study is to examine the stagnation point flow of a dusty Casson fluid over a stretching sheet with thermal radiation and buoyancy effects. The governing boundary layer equations are represented by a system of partial differential equation. After applying suitable similarity transformations, the resulting boundary layer equations are solved numerically using the Runge Kutta Fehlberg fourth-fifth order method (RKF-45 method). The behaviors of velocity, temperature and concentration profiles of fluid and dusty particles with respect to change in fluid particle interaction parameter, Casson paramter, Grashof number, radiation parameter, Prandtl number, number density, thermal equilibrium time, relaxation time, specific heat of fluid and dusty particles, ratio of diffusion coefficients, Schmidt number and Eckert number are analysed graphically and discussed. Our computed results interpret that velocity distribution decays for higher estimation of Casson parameter while temperature distribution shows increasing behavior for larger radiation parameter.     

Computational treatment of free convection effect on flow of elastico-viscous fluid past an accelerated plate with constant heat flux

Effect of free convection on the visco-elastic fluid (Walter - B’ type) flow past an infinite vertical plate accelerating in its own plane with constant heat flux is examined analytically. It is found that for given values of Grashof number, Prandtl number and Newtonian parameter; flow velocity at any point increases with the increase in time and non-Newtonian parameter, however, it decreases with both, the heating and cooling of the plate.     

Couple stress fluid flow with variable properties: A second law analysis

The present work examines the combined influence of variable thermal conductivity and viscosity on the irreversibility rate in couple stress fluid flow in between asymmetrically heated parallel plates. The dimensionless fluid equations are solved by using homotopy analysis method (HAM) and validated with Runge‐Kutta shooting method (RKSM). The convergent series solution is then used for the irreversibility analysis in the flow domain. The effects of thermal conductivity and viscosity variation parameters, couple stress parameter, Reynolds number, Grashof number, Hartmann number on the velocity profile, temperature distribution, entropy production, and heat irreversibility ratio are presented through graphs, and salient features of the solutions are discussed. The computations show that the entropy production rate decreases with increased magnetic field and thermal conductivity parameters, whereas it rises with increasing values of couple stress parameter, Brinkman number, viscosity variation parameter, and Grashof number. The study is relevant to lubrication theory.     

微极液体在两个多孔圆盘间的MHD流动及其热传导

两个平行的无限大多孔圆盘,圆盘表面有均匀注入时,数值地研究圆盘间不可压缩导电微极流体,在横向外加磁场作用下的轴对称稳定层流.运用von Krmn的相似变换,将非线性运动的控制方程转化为无量纲形式.使用基于有限差分格式的算法,在相应的边界条件下,求解简化后耦合的常微分方程组.讨论Reynolds数、磁场参数、微极参数和Prandtl数,对流动速度和温度分布的影响.在特殊情况下,所得结果与已有文献的工作有着很好的一致性.研究表明,圆盘表面的传热率随着Rynolds数、磁场参数和Prandtl数的增加而增加;剪切应力随着注入的增加而减少,但它随着外部磁场的加强而增加.和Newton流体相比较,微极流体的剪切应力因素较弱,有利于聚合体加工过程中流动和温度的控制.     

Numerical study of magnetohydrodynamic viscous plasma flow in rotating porous media with Hall currents and inclined magnetic field influence

A numerical solution is developed for the viscous, incompressible, magnetohydrodynamic flow in a rotating channel comprising two infinite parallel plates and containing a Darcian porous medium, the plates lying in the x–z plane, under constant pressure gradient. The system is subjected to a strong, inclined magnetic field orientated to the positive direction of the y-axis (rotational axis, normal to the x–z plane). The Navier–Stokes flow equations for a general rotating hydromagnetic flow are reduced to a pair of linear, viscous partial differential equations neglecting convective acceleration terms, for primary velocity (u′) and secondary velocity (v′) where these velocities are directed along the x and y axes. Only viscous terms are retained in the momenta equations. The model is non-dimensionalized and shown to be controlled by a number of dimensionless parameters. The resulting dimensionless ordinary differential equations are solved using a robust numerical method, Network Simulation Methodology. Full details of the numerics are provided. The present solutions are also benchmarked against the analytical solutions presented recently by Ghosh and Pop [Ghosh SK, Pop I. An analytical approach to MHD plasma behaviour of a rotating environment in the presence of an inclined magnetic field as compared to excitation frequency. Int J Appl Mech Eng 2006;11(4):845–856] for the case of a purely fluid medium (infinite permeability). We study graphically the influence of Hartmann number (Ha, magnetic field parameter), Ekman number (Ek, rotation parameter), Hall current parameter (Nh), Darcy number (Da, permeability parameter), pressure gradient (Np) and also magnetic field inclination (θ) on primary and secondary velocity fields. Additionally we investigate the effects of these multiphysical parameters on the dimensionless shear stresses at the plates. Both primary and secondary velocity are seen to be increased with a rise in Darcy number, owing to a simultaneous reduction in Darcian drag force. Primary velocity is seen to decrease with an increase in Hall current parameter (Nh) but there is a decrease in secondary velocity. The study finds important applications in magnetic materials processing, hydromagnetic plasma energy generators, magneto-geophysics and planetary astrophysics.     

Heat transfer in unsteady axisymmetric second grade fluid

This work looks at the heat transfer effects on the flow of a second grade fluid over a radially stretching sheet. The axisymmetric flow of a second grade fluid is induced due to linear stretching of a sheet. Mathematical analysis has been carried out for two heating processes, namely (i) with prescribed surface temperature (PST case) and (ii) prescribed surface heat flux (PHF case). The modelled non-linear partial differential equations in two dependent variables are reduced into a partial differential equation with one dependent variable. The resulting non-linear partial differential equations are solved analytically using homotopy analysis method (HAM). The series solutions are developed and the convergence is properly discussed. The series solutions and graphs of velocity and temperature are constructed. Particular attention is given to the variations of emerging parameters such as second grade parameter, Prandtl and Eckert numbers.