Polymerization initiated by an electron donor–acceptor complex. Part I. Polymerization of methyl methacrylate initiated by liquid sulfur dioxide–pyridine complex in the presence of carbon tetrachloride

The polymerization of methyl methacrylate can be initiated by a charge-transfer complex of liquid sulfur dioxide and pyridine in the presence of carbon tetrachloride. The molar ratio of sulfur dioxide and pyridine which participated in the complex was found from a spectrophotometric study to be 2:1. The polymerization proceeds through free-radical intermediates. The overall rate of polymerization is proportional to the square root of the concentration of the complex, and the values of k_p/k_t^1/2 under the various polymerization conditions were satisfactorily consistent with the literature value. For the activation energy of the overall reaction, 8.2 kcal./mole was obtained, and for initiation, 9.7 kcal./mole was evaluated from the values of k_p/k_t^1/2. It was deduced from a kinetic mechanism for the initiation that a primary radical may be produced from the reduction of carbon tetrachloride by an associated complex consisting of liquid sulfur dioxide–pyridine complex and the monomer.     

Polymerization initiated by an electron donor–acceptor complex. VI. Polymerization of methyl methacrylate initiated by a liquid SO2–nicotine complex and carbon tetrachloride

A kinetic study has been made of polymerization of methyl methacrylate initiated by an electron donor–acceptor complex of liquid SO₂ (electron acceptor) and nicotine (donor) in the presence of carbon tetrachloride. It is concluded that the polymerization proceeds through free-radical intermediates similar to the cases of liquid SO₂–pyridine and liquid SO₂–poly(2-vinylpyridine) complexes. The overall rate of polymerization is proportional to the square root of both liquid SO₂ and nicotine concentrations, and the values of k_p/k_t^½ under various polymerization conditions are in satisfactory agreement with the literature values. For the activation energy of initiation, 13.6 kcal/mole is estimated from the k_p/k_t^½ values obtained at temperatures ranging from 0 to 80°C.     

Polymerization of methyl methacrylate using isatoic anhydride–bromine donor–acceptor complex as the photoinitiator

Isatoic anhydride (IA) alone did not initiate photopolymerization of methyl metacrylate (MMA) at 40°C when exposed to visible light for about 180 min. But IA, when used in combination with bromine (Br₂) as the initiator, initiated the photopolymerization of MMA readily under the same conditions. This behavior was explained by the formation of a donor-acceptor type of complex between IA and Br₂ in the presence of MMA. The polymerization was found to proceed via a free radical mechanism and the radical generation process was considered to follow an initial complexation reaction between the initiator components and monomer. The complex initiator showed nonideal kinetics for the present system (initiator exponent < 0.5) and was analyzed. The monomer exponents varied from 0.83 to 1.15 normally depending on the nature of solvent used. Initiator-dependent chain termination was significant as well as the bimolecular mode of chain termination. © 1993 John Wiley & Sons, Inc.     

Photopolymerization of methyl methacrylate using a morpholine–sulfur dioxide charge-transfer complex as the photoinitiator

Photopolymerization of the vinyl monomer (M) of methyl methacrylate (MMA) was kinetically studied by using near-UV/visible light at 40°C and employing a morpholine (MOR)–sulfur dioxide (SO₂) charge-transfer (C-T) complex as the photoinitiator. The rate of polymerization (R_P) was found to be dependent on the morpholine: sulfur dioxide mole ratio; the 1 : 2 (MOR–SO₂) complex acted as the latent initiator complex C which underwent further complexation with the monomer molecules to give the actual initiating complex I. Using the 1 : 2 (MOR–SO₂) C-T complex as the latent initiator, the observed kinetics may be expressed as R_P [MOR–SO₂]^0.27[M]^1.10. Benzoquinone behaved as a strong inhibitor. Polymers obtained tested positive for the incorporation of a sulphonate-type end group. Polymerization followed a radical mechanism. Kinetic nonideality as revealed by a low initiator exponent and monomer exponent of greater than unity was explained on the basis of a prominent primary radical termination effect. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1973–1979, 1998     

Photopolymerization initiated by charge-transfer complex. VI. Photopolymerization of methyl methacrylate with the use of isoquinoline–chlorine charge-transfer complex

Polymerization of methyl methacrylate in visible light was studied at 30°C using the isoquino-line–chlorine charge-transfer complex as the photoinitiator. Analyses of kinetic and other data indicate that the polymerization proceeds via a radical mechanism and the termination is initiator dependent. Chain termination via degradative chain (initiator) transfer appears to be significant.     

Polymerization of methyl methacrylate with aminoalcohols and carbon tetrachloride initiated by charge-transfer mechanism

Polymerization of methylmethacrylate (MMA) with aminoalcohols, namely ethanolamine (EA), diethanolamine (DEA) and triethanolamine (TEA) in the presence of carbontetrachloride (CCl₄) has been investigated in the dimethylsulfoxide (DMSO) medium by employing a dilatometric technique. The rate of polymerization (R _p) has been evaluated under the conditions and > 1. The kinetic data reveal the possible participation of a charge-transfer complex in the polymerization reaction. In the absence of either CCl₄ or amine, no polymerization of MMA was observed under the present experimental conditions. The polymerization of MMA was inhibited by hydroquinone, indicating a free radical initiation.     

Vinyl polymerization. 364. Polymerization of methyl methacrylate initiated with benzaldehyde

Benzaldehyde (PhCHO) is found to be able to initiate the radical polymerization of methyl methacrylate (MMA). The rate of polymerization is expressed by the following equation: R_p = const[PhCHO]^0.5[MMA]^1.5. The overall activation energy is estimated to be 56.3 kJ mole^?1. The mechanism of polymerization is discussed.     

Polymerization initiated by the charge-transfer complex of styrene and maleic anhydride in the presence of cumene and of cumene and liquid sulfur dioxide

A polymerization was induced with a charge-transfer type of complex consisting of styrene and maleic anhydride in the presence a solvent such as ethyl benzene, cumene, or p-cymene. No polymer was obtained either when the solvent was missing from the polymerization system or when benzene, toluene, or xylene, which are relatively stable to hydrogen abstraction, was added to the polymerization system. An effective initiation, however, took place when cumene or p-cymene, each of which has a labile hydrogen on an α carbon, was added. On the basis of elementary analysis and infrared spectroscopy the formation of copolymer containing substantially equimolar amounts of styrene and maleic anhydride was ascertained. This polymerization was inhibited by the addition of DPPH, suggesting that the system styrene–maleic anhydride–cumene functions much as a conventional free-radical initiator. On the other hand, when a solution of cumene and liquid sulfur dioxide was added to the polymerization system, polystyrene was obtained. This polymerization was inhibited by the addition of a base such as dimethyl-formamide or dimethyl sulfoxide, indicating that the polymerization proceeds through carbonium ion intermediates. The addition of ethyl benzene or of p-cymene brought about the same result as cumene. It is conceivable that the polymerization is induced by the abstraction of hydrogen attached at the α position of cumene by means of the charge-transfer complex of styrene and maleic anhydride.     

Kinetics of donor–acceptor complex polymerization. IV. Limiting yield in the butadiene–acrylonitrile copolymerization

An analysis of the kinetic equation proposed for donor–acceptor systems indicated that the polymer yield at a given time should attain limiting value with increase in rate of initiation. It was essential that the equilibria not be shifted by temperature variation, and the change in rate of initiation was achieved by controlled current passage through the solution. A definite plateau in the yield of polymer was obtained. This was shown not to be due to diffusion control of the rate of initiation.     

Selective initiation of nonconjugated dienes containing electron donor–electron acceptor systems. IV. Polymerization of vinyl ether–styrene monomers

Three isomeric nonconjugated dienes, o-, m- and p-(2-vinyloxyethoxy)styrenes, were selectively polymerized by anionic or radical initiators through the styryl double bond while leaving the vinyl ether moiety intact. The anionic-initiated polymeric products are of high molecular weight and narrow molecular weight distribution as characterized by membrane osmometry and gel-permeation chromatography, respectively. These polymers were subsequently crosslinked by cationic initiators via the vinyl ether moiety on the polymer side chains. Acid-catalyzed hydrolysis of the poly(2-vinyloxyethoxy)styrenes yielded their respective hydroxy-containing polymers, polyvinylphenoxyethanols. The latter were physically and spectroscopically identical to authentic samples prepared by radical polymerization of the corresponding vinylphenoxyethanols, which, in turn, were synthesized by hydrolysis of the (2-vinyloxyethoxy)styrenes. The polyvinylphenoxyethanols were shown to undergo many chemical transformations, such as esterification with 3,5-dinitrobenzoyl chloride, cyanoethylation, and urethane formation.     

Kinetics of polymerization of methyl methacrylate initiated with cyclohexanone. Part I

The kinetics of radical polymerization of methyl methacrylate were investigated in a dioxane solution with cyclohexanone as initiator. It was found that the overall rate of reaction initiated with cyclohexanone (R_p) is proportional to the concentration of monomer and to the square root of the concentration of the initiator. The effect of temperature on the R_p in the temperature range of 65–95°C was discussed. The Arrhenius activation energy E_a estimated for the temperature range of 65–75°C was 137 kJ mol^?1.     

Kinetic studies of nonaqueous polymerization of methyl methacrylate initiated by ferric laurate–n-hexyl amine system

The polymerization of methyl methacrylate was studied in carbon tetrachloride medium with ferric laurate, a metal soap, in combination with n-hexyl amine as the initiator system at 60°C. The rate of polymerization was found to be linear with the monomer concentration and proportional to the square root of both ferric ion and amine concentration. A reaction scheme involving initial complex formation between ferric ion and amine and subsequent reaction of the complex with the solvent molecule to produce free radicals responsible for initiation of polymerization has been postulated to account for the observed results.     

Polymerization of methyl methacrylate initiated by tri-n-butylborane–organic halide systems

The polymerization of methyl methacrylate (MMA) initiated by tri-n-butylborane (TBB) was studied in the presence of various organic halides (R′X). It was found that R′X accelerated the polymerization of MMA. Aliphatic halides were more effective than aromatic halides. Cocatalytic effects of butyl halides decreased in the order: n -BuI > n -BuBr > n -BuCl; n -BuBr ? sec-BuBr > i-BuBr > tert-BuBr. In the polymerization of MMA by TBB- n -BuI, the initial rate of polymerization was found to be proportional to the concentration of MMA and to the square root of the concentration of TBB-n-BuI. The apparent activation energy was 5.3 kcal/mole. From this and other results, it was assumed that the polymerization of MMA by this initiator system proceeds by a radical mechanism via a weak complex between TBB and R′X; alkyl radicals are formed by the interaction of R′X with TBB. The TBB–R′X system can initiate the polymerization of MMA and AN, but is ineffective in the polymerization of styrene.     

Radical polymerization of methyl methacrylate initiated by an enolizable ketone–carbon black system

The polymerization of methyl methacrylate (MMA) initiated by an enolizable ketone (R₁? CO? CH₂? CO? R₂)-carbon black system was investigated. Although enolizable ketone itself could not do so, the polymerization of MMA was initiated by enolizable ketone in the presence of carbon black. In addition, a chloranil-enolizable ketone system was able to initiate the polymerization of MMA. It was found that the enol form of the ketone and quinonic oxygen groups on the carbon black surface played an important role in the initiation system; namely, it was considered that the polymerization was begun by the ketone radical (R₁? CO? CH? CO? R₂) formed by a one-electron transfer reaction from enolate ion to quinonic oxygen groups. The effect of solvent on the process was also studied. The rate of the polymerization increased, depending on the solvent used, in the following order: benzene < 1,4-dioxane < dimethyl sulfoxide < N,N-dimethylformamide < N-methyl-2-pyrrolidone. Furthermore, it became apparent that during the polymerization poly(methyl methacrylate) was grafted onto the carbon black surface (grafting ratio was ca. 40% when benzene was used as solvent) and the carbon black obtained gave a stable colloidal dispersion in organic solvent.     

Organometal-initiated polymerization of vinyl ketones. III. Polymerization of methyl isopropenyl ketone initiated by the triethylaluminum–methyl isopropenyl ketone complex

The kinetics and mechanism of the triethylaluminum–methyl isopropenyl ketone complex-initiated polymerization of methyl isopropenyl ketone (3-methyl-3-butene-2-one) in toluene have been studied over a range of temperature. Equimolar quantities of monomer and triethylaluminum were premixed to form the initiator species prior to the addition of the excess monomer for polymerization. Initial and overall reaction rates indicate a first-order dependence on monomer and initiator concentrations. The overall activation energy for the polymerization is 52 ± 3 kJ/mole. Molecular weight distributions were bimodal, with peaks corresponding to the trimer and high molecular weight material. The kinetic data are consistent with a coordinate polymerization mechanism.     

Non-ideality in vinyl polymerization—VI: Polymerization of methyl methacrylate initiated by benzoyl peroxide

The polymerization of methyl methacrylate in benzene was initiated by benzoyl peroxide and examined by kinetic analysis particularly from the point of view of primary radical termination. It is concluded that the velocity constant for dissociation of the benzoyloxy radical to give the phenyl radical is affected by the nature of the medium.