Oxazolidines versus schiff bases

The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably.     

Massenspektrometrische Untersuchung organischer Stickstoffverbindungen. XXVII—Intramolekulare Redoxreaktionn bei ionisierten ortho-substituierten Nitroaromaten

Collisional activation demonstrates that the stable ions from o-nitrobenzaldehydedimethylacetale possess the structure of ionized o-nitroso benzoic acid methyl ester. Contrary to previous conclusions it is demonstrated that the structure of the stable ions (m/e 135) from different precursors [i.e. o-nitrobenzyl alcohol o-nitrobenzyl cyanide and o-nitrobenzaldoxime is best represented by 2,1-benzisoxazoline-3-one. Ionized o-nitrosobenzaldehtde rearranged to 2,1-benzisoxazoline-3-one prior to collision induced decomposition, whereas 2-benzoxazolinone and 3-hydroxy-1,2-benzisoxazole do not rearrange within 10^?5 s.     

Electron impact studies. CVII—Negative ion mass spectra of the oxime group. Monoximes derived from α-dicarbonyl systems

Specific losses of water are observed from the molecular anions of monoximes of α-diketones. Labelling studies, kinetic energy release values and the +E spectra of ions have been used to aid in the elucidation of the fragmentation pathways. It is proposed that the majority of ions have α-keto nitrile structures.     

Structural changes in polymers of diethyl succinylsuccinate(1,4-diethoxycarbonyl-2,5-dihydroxy-1,4-cyclohexadiene) with diamines at high temperatures

The structural changes of the polymers having the following structures: at high temperatures were studied by the spectroscopic and thermal analysis. When the polymers were heated in air, they were oxidized predominantly to polymers having the structure: The rate of oxidation was fast and the reaction was almost completed within 2 hr at 180°C. In the case of polymer 3, an intramolecular cyclization to form acridone was detected as a minor reaction.     

Zur Darstellung von Cyclophosphaten,Cyclophosphatophosphonaten, Diphosphonaten und Diphosphiten in Harnstoffschmelzen

Preparation of Cyclophosphates, Cyclophosphatophosphonates, Diphosphonates, and Di-phosphites in Urea Melts Ammonium cyclotriphosphate (NH₄)P₃O₉, ammonium cyclotetraphosphate [P^IV? P^IV ? O? ]₂, ammonium cyclotriphosphatophosphonates Ammonium organyldiphosphonates And ammonium diphosphites are prepared in high yields on heating acidic phosphates, phosphonates, and phosphites in urea or urea/ammonium nitrate melts. The mechanism of the dehydration of phosphorus compounds containing POH groups in molten urea is discussed.     

Darstellung und Stabilität von Aroxy-fluor-silanen

Preparation and Stability of Aroxy-fluoro-silanes. Different possibilities for preparation of aroxy-fluoro-silanes (esp. substituted phenoxy-fluoro-silanes) are investigated. The reaction was proved as the best method of preparation. The aroxy-fluoro-silanes are disposed to dismutation reactions.     

Synthesis and properties of polyamides containing imidazoline rings

The novel polyamide containing an imidazoline ring(PAI) was synthesized by a two-stage melt polymerization of dimethyl terephthalate (DMT) with diethylenetriamine (DETA) or triethylenetetramine (TETA). The heat resistance of PAI was superior to that of polyamide which was synthesized only in the first-stage reaction and didn't contain imidazoline ring. Their chemical structures were identified by infrared spectroscopy and NMR. The optimum condition for production was studied by varying several reaction factors, including the contents of H₂O and H₃PO₄, the reaction temperature and the reaction time at second-stage reaction under vacuum. According to study of the characteristics of solution behavior of PAI, both the viscosity and the degree of cyclization could be described by equation of in m-cresol at 30°C.     

Interfaces between coexisting phases in polymer mixtures: What can we learn from Monte Carlo simulations?

Symmetric binary polymer mixtures are studied by Monte Carlo simulation of the bond fluctuation model, considering both interfaces between coexisting bulk phases and interfaces confined in thin films. It is found that the critical behavior of interfacial tension and width is compatible with that of the Ising model, as expected from the universality principle. In the strong segregation limit, only qualitative but not quantitative agreement with the self-consistent field (SCF) theory is found. It is argued that the SCF theory requires but for the short chains studied (N = 32 effective monomer units per chain), the limit is only reached for close to unity. Also, the effective χ-parameter decreases in the interface. It is shown that the interfacial width w does not increase by the adsorption of block copolymers as long as their areal density is still dilute (“mushroom” regime). But a broadening of interfaces does occur for thin films confined between walls at distance D, due to fluctuations that lead to for short-range forces, in agreement with experiment.     

Reactivity of the A-CH=N=NR-CX-B System. 1,3,4-thiadiazoles and Δ2 -thiadiazolines

The reactivity of the - system towards ferric chloride has been investigated. The cyclo-oxidation reaction led to the formation of 2-amino-5-thenoyl-1,3,4-thiadiazoles and 4-methyl-5-imino-2-thenoyl-Δ²-1,3,4-thiadiazolines. Their structures were proven spectro-scopically and chemically (nucleophilic attack and formation of the related 2-amino-1,3,4-thiadiazoles and 4-methyl-5-imino-Δ²-1,3,4-thiadiazolines).     

HNO,an Intermediate in (Light-induced) Rearrangement Reactions of Nitrosooxy Compounds and Nitrosamines

IR-spectroscopic investigations of light-induced rearrangement reactions of nitrosooxymethane (CH³ONO³), nitrosooxyethane (CH₃CH₂ONO) and N,N-dimethylnitrosamine ((CH₃)₂NNO) in low-temperature rare-gas matrices have established that these molecules are transformed in two photolysis steps to the previously unknown C-nitroso compounds nitrosomethanol (CH₂(OH)(NO)), 1-nitrosoethanol (CH₃CH(OH)(NO)), and methyl(nitrosomethyl)amine CH₂(NO)(NH)(CH₃). Evidence for a similar rearrangement reaction has been advanced for N-Nitrosopyrrolidine which is converted to C-nitrosopyrrolidine . The matrix-isolation technique in combination with wavelength-selective irradiation allowed to trap and characterize an intermediate of rearrangement which revealed to be nitroxyl (HNO) complex (CH₂…HNO, CH₃CHO…HNO, CH₃N = CH₂…HNO, and ). Since these findings have a close resemblance with rearrangement reactions of more complex nitrosooxy compounds, nitrosamines, or nitrosohydrazines used in organic synthesis, it is suggested that also in these reactions nitroxyl is present as an intermediate species.     

Living cationic polymerization of 2-chloroethyl vinyl ether: Kinetics,mechanism and application to polymer synthesis

The cationic polymerization of 2-chloroethyl vinyl ether initiated by HI/weak Lewis acid (I₂ or ZnI₂) systems has been studied from both a kinetic-mechanistic and a synthetic viewpoint. At low temperature and in toluene as solvent, the polymerization proceeds via a living process and the kinetic order with respect to monomer varies according to the nature of the Lewis acid activator. This behaviour can be explained by the coordination of the Lewis acid with both the monomer and the chain-end, the latter leading to a strong activation of the -I bond towards monomer insertion. The living polymerization obtained from divinylether precursors leads to -I ended telechelics, and their transformation into dihydroxytelechelic oligomers has been performed. The chemical modification of chloroalkyl side groups by phase transfer catalysis allows the attachment of specific groups without consumption of-OH ends.     

The pyrolyses of tri- and tetramethylethylene in the presence of nitric oxide

The pyrolyses of trimethylethylene and tetramethylethylene have been investigated in the presence and absence of nitric oxide. It appears that apart from a unimolecular split, e.g., a disproportionation reaction such as may play an important role in initiation. Nitric oxide had no effect on H₂ production, which is probably a molecular process. There was similar behavior of both compounds in the presence of NO, indicating that the olefinic hydrogen atom does not play a decisive role. Other aspects of the mechanisms are discussed.     

Précisions apportées au mécanisme de la polymérisation du chlorure de vinyle par le chlorure de tertiobutyle-magnésium en milieu tétrahydrofurannique. Etude par résonance magnétique nucléaire

NMR analysis of the low molecular weight poly(vinyl chloride) obtained from polymerizations initiated by t-BuMgCl in THF solution suggests that all the polymer chains have the structure: Enhanced signal/noise ratio by NMR spectrum accumulation confirms this structure in products of higher molecular weights. Examination of the NMR spectrum of vinyl chloride monomer in THF solution reveals the formation of a monomer–THF complex; it seems that the initiation step of the polymerization is governed by this complexation phenomenon.     

Synthesis of titanium polyesters

Titanium polyesters of the form where Cp denotes cyclopentadiene, have been synthesized by utilizing both the interfacial and solution techniques. Polymer yield increases with reaction time. The reactive titanium reactant in the solution polycondensations is believed to be the Cp₂Ti⁺² cation.     

Modification of poly(vinyl alcohol) through reaction with phosphorus-containing reactants

Crosslinked products of the form: and have been formed from the interfacial condensation of phosphorus diacid halides with poly(vinyl alcohol). Product yield and amounts of phosphorus reactant included in the product increases as the amount of base increases. Product stability in aqueous systems decreases in the order neutral > base > acid.     

A Lipase‐Responsive Vehicle Using Amphipathic Polymer Synthesized with the Lipase as Catalyst

We describe an enzyme‐responsive polymeric vehicle, which is of great interest in controlled drug delivery, biosensing, and other related areas. The polymer synthesized using lipase as catalyst in DMSO has a favorable molecular structure that is quickly hydrolyzed by lipase in aqueous phase, and allows a fast release of encapsulated molecules.

     

Phosphates d'enols. XII—Etude en Spectrometrie de Masse de Derives Diethyliques et di-n-Butyliques

The mass spectrometric fragmentations of diethyl phosphates (1) and di-n-butyl phosphates (2) are influenced by the nature of the substituents R, R′ and R″ fixed on the double bond When R = H, the loss of ethylene or 1-butene is mainly observed. When R = CH₃, the double rearrangement process occurs with alkyl group participation of the enolic chain.     

Pictet‐spengler cyclization in room temperature ionic liquid: A convenient access to tetrahydro β‐carbolines

1,2,3,4‐Tetrahydro‐β‐carbolines have been synthesized in moderate to good yields in short reaction time using the ionic liquid [bbim] BF₄ as reaction medium and promoter. There was no need for the use of an additional catalyst normally employed in Pictet‐Spengler condensation.     

Effects of molecular weight,rubber toughening,and environment on fatigue crack propagation behavior of block amide copolymers

The Fatigue Crack Propagation (FCP) behavior of block amide copolymers is investigated as a function of molecular weight, rubber toughening as well as environmental conditions. The enhancement of FCP resistance with increasing average molecular weight is shown and correlated to features observed on the fracture surface. Particular attention is paid to hysteretic heating, measured with an infrared camera, in the crack tip zone of different average molecular weight copolymers and rubber-toughened copolymer. A FCP approach of stress-cracking in an aqueous solution of zinc chloride is proposed here. An improvement in FCP resistance as the average molecular weight increases, similar to that exhibited in normal environment, appears. The shift in da/dN values over the tested range of can be approximated by an exponential function: