Conventional and microwave irradiation assisted synthesis of new 1,2,4‐triazepine‐3‐thiones

New 1,2,4‐triazepine‐3‐thiones have been obtained during the respective reactions of N‐substituted‐hydrazino carbothioamides with dimethyl acetylenedicarboxylate and dibenzoyl acetylene under prolonged reflux in acetic acid and/or DMF. However, the reaction of the starting materials in DMF under microwave irradiation afforded the same products in higher yields within a few minutes.     

Theory of Multiple‐Detection Size‐Exclusion Chromatography of Complex Branched Polymers

SEC separates complex branched polymers by hydrodynamic volume, rather than by molecular weight or branching characteristics. Equations relating the response of different types of detectors are derived including band broadening, by defining a distribution function N′(M,V_h), the number of chains with molecular weight M and hydrodynamic volume V_h. While the true molecular weight distribution of complex polymers cannot be determined by SEC, irrespective of the detector used, the formalism enables multiple detection SEC data to be processed to both analyze the polymer sample and reveal mechanistic information about polymer synthesis. The formalism also shows how the true weight‐ and number‐average molecular weight, and , can be obtained from correct processing of the hydrodynamic volume distributions.

     

Polyimides from dianhydrides and bis(p-aminophenyl) alkane diamines. I

Polyimides were synthesized from pyromellitic dianhydride (PMDA), 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), and three different diamines with the following general structure: where R is ethyl, propyl, or isobutyl. The poly(amic acids) obtained had inherent viscosities ranging from 0.30 to 0.93 and were thermally/chemically converted to polyimides. The thermal stability of the polyimides was evaluated by using dynamic thermogravimetric analysis in air. Physical and thermal properties of these polyimides were compared with that obtained by reacting 2,2-bis(4-aminophenyl) propane and PMDA/BTDA.     

Fabrication of Metal‐Block‐Copolymer Composite Films by a Palladium‐Catalyzed Electroless Nickel‐Plating Process

Summary: Homogeneous films of PI‐b‐PDMAEMA are prepared on top of silicon (100) substrates. The free film surface shows microdomains of PDMAEMA within a PI matrix. These microdomains act as templates for the highly site‐selective synthesis of metal nanoparticles via palladium‐catalyzed electroless nickel plating. The particle formation is studied by atomic force microscopy in tapping mode and implications for a redox reaction and a nanoparticle growth mechanism on the surface of nanopatterned films are discussed.

Chemical structure of the PI‐b‐PDMAEMA copolymer and AFM phase image of a PI‐b‐PDMAEMA film on Si (100) substrate.     

Kinetic study of the gas-phase reaction c-C5H8 + I2 ⇄ c-C5H6 + 2HI the heat of formation and the stabilization energy of the cyclopentenyl radical

The gas-phase dehydrogenation of cyclopentene to cyclopentadiene catalyzed by iodine in the range 178–283°C has been found to obey a rate law consistent with the slow rate-determining step, \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm I} + {\rm c} - {\rm C}_5 {\rm H}_8 \stackrel{4}{\rightarrow}{\rm HI} + {\rm c} - {\rm C}_5 {\rm H}_7 $\end{document}, log [k₄/(1 mole^?1 sec^?1)] = 10.25 ± 0.08 - (12.26 ± 0.18)/θ, where θ = 2.303 R T in kcal/mole. Surface effects are not important. This value of E₄ leads to a value of DH = 82.3 ± 1 kcal/mole and ΔH_f298 = 38.4 ± 1 kcal/mole. From difference in bond strengths in the alkane and the alkene, the allylic resonance stabilization in the cyclopentenyl radical is 12.6 ± 1.0 kcal/mole, in excellent agreement with the value for the butenyl radical. Arrhenius parameters for the other steps in the mechanism are evaluated. The low value of A₄ (compared with A₄ for cyclopentane) suggests a “tighter” transition state for H-atom abstraction from alkenes than from alkanes.     

Post‐Synthesis Functionalization of (Meth)acrylate Based Monoliths via Electron Beam Triggered Graft Polymerization

Porous polymeric monoliths were prepared via electron beam triggered free radical polymerization of (meth)acrylates. Post‐synthesis functionalization of these supports was accomplished via electron beam initiated free radical graft polymerization of methacryloyl‐substituted NHC precursors. The grafted precursors were converted into the corresponding copper complexes. Cu‐loadings were between 1.3 mg · g⁻¹ and 1.5 mg · g⁻¹. These supported catalysts were used in selected CO hydrosilylation and cyanosilylation reactions using a continuous flow setup.

     

Effect of Molecular Weight on Photoinduced Birefringence in a Chiral Liquid Crystalline Azodye Polymer

Summary: The evolution of the photoinduced birefringence in thin films of narrow polymer fractions is studied and compared with the behavior of the non‐fractionated polymer. The Δn_ind value decreases by increasing the degree of polymerization ( ) within the oligomeric range but becomes independent of molecular weight starting from a of ≈70. Thermal pretreatment of the films results in higher photoinduced birefringence. The films show good stability of the photorecording.

Birefringence induced after 10 min, Δn_ind(600) and its growth rate at the same moment versus molecular weight.     

Clay Functionalization and Organization for Delamination of the Silicate Tactoids in Poly(L‐lactide) Matrix

Summary: Three kinds of organoclay, i.e., Cloisite15A® (C15A), Cloisite20A® (C20A), and Cloisite30B® (C30B) were modified with silane to prepare twice functionalized organoclay (TFC). The pristine Cloisite® clays and the TFC were melt compounded with poly(L ‐lactide) (PLLA) and morphology of the composites was observed to elucidate the effects of the d₀₀₁ gallery distance, the epoxy content of TFC, and the compatibility between the organic ammonium surfactant and PLLA on the degree of exfoliation of the clay layers.

Plots of I_TFC/I_Cloisite versus epoxy content for PLLA composites with (a) Cloisite15A® (C15A), (b) Cloisite20A® (C20A), (c) Cloisite30B® (C30B).     

Easy One‐Pot Synthesis of a Reactive Hydrogel from Commercially Available 2‐Isocyanatoethyl Methacrylate and K2S2O5

Addition of commercially available 2‐isocyanatoethyl methacrylate to a water solution of potassium bisulfite unexpectedly yields an anionically charged hydrogel. Structural analysis shows the presence of sulfonato‐blocked isocyanates (with no detectable residual isocyanates), a full polymerization of the vinyl groups, and the appearance of urea functional groups. A mechanism is proposed to explain the gel formation, based on a combination of bisulfite‐initiated free‐radical polymerization, crosslinking by urea bridge formation, and addition of bisulfite ions to isocyanate groups. Some basic physical properties (TGA, swelling) of the gel are presented.

     

Sequence distribution of 1,4 and 3,4 units in polyisoprenes

The ¹³C-NMR spectra of hydrogenated polyisoprenes were investigated. Polyisoprenes containing various ratios of 1,4 and 3,4 units were prepared with n-BuLi/Et₂O and were hydrogenated by using p-toluenesulfonylhydrazide. ¹³C-NMR signals of the hydrogenated polymers were assigned for the triad sequences arising respectively from the 1, 4 and 3, 4 units of polyisoprenes. On the basis of these assignments it was confirmed that 1,4 and 3,4 units were randomly distributed in the polyisoprenes prepared with n-BuLi and that these polymers did not contain appreciable amounts of head-to-head or tail-to-tail 1,4 linkages.     

Synthesis and in vitro antiproliferative activity of new substituted benzo[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines

The synthesis of new planar benzo[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidine derivatives, carrying different side groups in the 2 position, is described. The novel substituted pyrimidines were obtained by reaction of the key intermediate 3‐dimethylamino methylen‐7‐methoxy‐2,3‐dihydrobenzo[3′,2′:5,6]thiopyran‐4(4H)‐one, characterized by a reactive group adjacent to the C?O function, with the suitable binucleophile amidines in a basic medium. All the new compounds were evaluated for the antiproliferative ability by an in vitro assay on two human tumour cell lines (HL‐60 and HeLa), and the 2‐phenyl substituted derivative showed the capacity to inhibit cell growth on HL‐60. Linear flow dichroism measurements indicated the inability to form a molecular complex with DNA.     

Microwave Accelerated Synthesis of N‐Phenylmaleimide in a Single Step and Polymerization in Bulk

Summary: This paper reports the microwave mediated direct synthesis of N‐phenylmaleimide ( 3 ) from maleic anhydride ( 1 ) and aniline ( 2 ) by using microwave irradiation. Good yields and very short reaction times were the main aspects of the method. The reaction conditions and kinetics of this process were investigated. Microwave irradiation in a boiling solvent showed the existence of a significant specific microwave effect. The microwave homopolymerization of 3 in bulk using 2,2′‐azoisobutyronitrile (AIBN) as a free radical initiator was also carried out.

Kinetic curves for the synthesis of N‐phenylmaleimide in a MW and in an oil bath at 144 °C (boiling xylene).     

Oxazolidines versus schiff bases

The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably.     

Darstellung und Stabilität von Aroxy-fluor-silanen

Preparation and Stability of Aroxy-fluoro-silanes. Different possibilities for preparation of aroxy-fluoro-silanes (esp. substituted phenoxy-fluoro-silanes) are investigated. The reaction was proved as the best method of preparation. The aroxy-fluoro-silanes are disposed to dismutation reactions.     

Orienting the Demixion of a Diblock‐copolymer Using 193 nm Interferometric Lithography for the Controlled Deposition of Nanoparticles

DUV interferometric lithography and diblock copolymer self‐organization have successfully been combined to provide a simple and highly collective nanopatterning technique enabling the organization of nanoparticles over several orders of magnitude, from nanometre to millimetre. The nanostructural changes at the surface of the polymer film after thermal annealing have been monitored by AFM and the process parameters optimized for obtaining a long‐range organization of the lamellar domains. In particular, the impact of the annealing conditions and geometric parameters of the substrate patterns have been investigated. The nanopatterns resulting from the lamellar demixion of (PS‐b‐MMA) were used for a controlled deposition of nanoparticles. The affinity of the hydrophobic particles for the PS block was demonstrated, opening new doors towards the preparation of high‐density arrays of nanoparticles with potential applications in data storage.

     

Electron impact studies. CVII—Negative ion mass spectra of the oxime group. Monoximes derived from α-dicarbonyl systems

Specific losses of water are observed from the molecular anions of monoximes of α-diketones. Labelling studies, kinetic energy release values and the +E spectra of ions have been used to aid in the elucidation of the fragmentation pathways. It is proposed that the majority of ions have α-keto nitrile structures.