Preparation and (13C)NMR spectroscopy of stereoregular poly(methacrylic acid)

Several procedures for synthesis of stereoregular poly(methacrylic acid) have been examined and the polymer characterized by (¹³C)NMR. Using d⁶ DMSO as solvent for spectroscopy gives better spectra than those previously obtained using aqueous solutions and stereochemical splittings can be resolved in the methyl signals. Free-radical polymerization in toluene solution is a Bernouilli process giving mainly heterotactic/syndiotactic polymer. Polymers produced with free-radical initiation in aqueous solution have a higher, and pH dependent, content of syndiotactic triads. A previously described procedure for producing regular polymers by hydrolysis of poly(trimethylsilyl methacrylate) requires modification to produce isotactic contents of above 90% and does not give truly syndiotactic polymer. In contrast, polymerization with γ-radiation can produce polymers with close to 90% of syndiotactic triads.     

Isospecific polymerizations of alkyl methacrylates with a bis(alkyl)Yb complex and formation of stereocomplexes with syndiotactic poly(alkyl methacrylate)s

Yb[C(SiMe₃)₃]₂ initiates the living polymerization of methyl methacrylate (MMA) at −78°C to give the polymer with M_n of 51.0×10⁴ (M_w/M_n=1.1) and high isotacticity (97%) in a quantitative yield. Mixing of the acetone solution of resulting polymer (M_n=16.3×10⁴) with the acetone solution of syndiotactic poly(MMA) (M_n=15.7×10⁴) prepared by the (C₅Me₅)₂SmMe(THF) initiator produces desired stereocomplex in high yield bearing very high T_m whose tensile modulus is higher than the respective isotactic and syndiotactic poly(MMA)s. Yb[C(SiMe₃)₃]₂ also generated isotactic (98%) poly[2-(dimethylamino)ethyl methacrylate] (DMEMA), and (C₅Me₅)₂SmMe(THF) affords the syndiotactic (97%) polymer in high yields. The combination of isotactic poly(MMA)-block-poly(DMEMA) (97/3) and syndiotactic poly(MMA)-block-poly(DMEMA) (97/3) provides the amphiphathic stereocomplex. In sharp contrast to the catalysis of Yb[C(SiMe₃)₃]₂ in toluene, the addition of THF or HMPA resulted in the formation of syndio-rich poly(MMA).     

Stereospecific polymerization of 9-fluorenyl methacrylate: Tacticity effects on the thermal and photophysical properties of the polymers

Poly(9-fluoreneyl methacrylate) was obtained through anionic polymerization with t-BuLi and t-BuMgBr and through radical polymerization with α,α′-azobisisobutyronitrile. Anionic polymerization with t-BuLi in tetrahydrofuran and radical polymerization afforded syndiotactic polymers (rr ∼ 90%), whereas anionic polymerization with Li and Mg initiators in toluene and CH₂Cl₂ led to isotactic polymers. The thermal and photophysical properties of the polymers were examined. A syndiotactic polymer tended to show higher glass transition and decomposition temperatures than an isotactic polymer. However, polymers with different tacticities were not likely to assume specific, distinctive conformations such as a helix or a π-stacked conformation in solution. An isotactic polymer showed stronger interactions in a CH₂Cl₂ solution with 2,4,7-trinitro-9-fluorenylidenemalononitrile, an electron-acceptor molecule, than a syndiotactic polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4656–4665, 2004     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). IV. Influence of solvent type

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C or 35°C in various solvents in the presence of stereoregular poly(methyl methacrylate) (PMMA). The occurrence of stereospecific replica polymerization appeared to be related to the capability of stereoassociation of isotactic and syndiotactic PMMA. The solvents can be roughly divided into three types. Type A solvents are polar solvents, which promote stereoassociation resulting in gelation and precipitation. Examples are dimethylformamide, dimethyl sulfoxide, and acetone. Type B solvents are nonpolar aromatic solvents like benzene and toluene, wherein stereoassociation is weaker but still leads to gelation. Type C solvents are very good solvents, in which stereoassociation does not occur. Chloroform and dichloromethane belong to this class. In solvents of type A as well as type B, polymerization in the presence of i-PMMA as a polymer matrix was syndiospecific. However, in the presence of s-PMMA as a polymer matrix the polymerization was isospecific only in type A solvents. The syndiotactic or isotactic triad contents of the polymer formed could be as high as ca. 90% at low conversions. In solvents of type C, polymerization in the presence of stereoregular PMMA proceeds according to a normal radical mechanism. Syndiotacticity was always less than 70%. Stereocomplexes formed in situ during replica polymerization were partly crystalline as detected by x-ray diffraction. The highest crystallinity was detected in those formed in type A solvents.     

Uniform polymer in synthetic polymer chemistry

The preparation of uniform polymers and their use in fundamental polymer chemistry are reviewed. A typical method of preparation is a combination of living polymerization and supercritical fluid chromatography separation. Synthetic uniform polymers allow us to solve ambiguous problems in polymer chemistry due to molecular weight distribution and are of significant importance for studies on structure–property relationships. A close inspection of an isotactic uniform chloral oligomer with a symmetrical chemical structure reveals that oligomers are the first examples of stable atropisomers of aldehyde oligomers and that their chiroptical properties are due only to their helical geometries. A molecular-level understanding of the mechanism and stoichiometry of the association process of polymer molecules is possible only with uniform polymers, and stereocomplex formation between isotactic and syndiotactic poly(methyl methacrylate)s in acetone has vigorously been studied by size exclusion chromatography (SEC) and NMR. End-functionalized uniform polymers have enabled us to prepare uniform polymer architectures, such as block, graft, comb, and star polymers. A uniform stereoblock poly(methyl methacrylate) with an isotactic (methyl methacrylate)₄₆-syndiotactic (methyl methacrylate)₄₆ structure shows a single SEC peak in chloroform but three peaks in acetone, which are ascribable to intermolecularly and intramolecularly associated complexes and nonassociated molecules. A three-arm star polymer with one isotactic chain and two syndiotactic chains shows a peculiar SEC behavior in acetone due to a braid type of intramolecular stereocomplex formation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 416–431, 2004     

Asymmetric selective polymerization of racemic 1,2-diphenylethyl methacrylate with the ethylmagnesium bromide-(−)-sparteine complex

Asymmetric selective (or stereoelective) polymerization of racemic 1,2-diphenylethyl methacrylate (DPEMA) with ethylmagnesium bromide (EtMgBr)-(?)-sparteine catalyst was studied in toluene at ?78°C. In the polymerization (S) enantiomer was consumed preferentially and the enantiomeric excess of initially polymerized (S) enantiomer was consumed preferentially and the enantiomeric excess of initially polymerized DPEMA was greater than 90%. Optically pure (R) monomer was recovered at about 70% polymer yield. Poly(DPEMA) obtained with EtMgBr-(?)-sparteine complex was highly isotactic. It was found in the polymerization of optically active DPEMA that optical rotation of poly(DPEMA) was dependent on the tacticity and that isotactic and syndiotactic poly(DPEMA)s showed opposite optical rotations. Circular dichroism spectra of the optically active polymers were measured.     

Heterotactic poly(vinyl alcohol)

Bulky substituents in vinyl trialkylsilyl ethers and vinyl trialkylcarbinyl ethers led to heterotactic polymers (H = 66%). The polymers were converted into poly(vinyl alcohol) (PVA) and further to poly(vinyl acetate), and tacticity was determined as poly(vinyl acetate). Vinyl triisopropylsilyl ether in nonpolar solvents yielded a heterotactic polymer with a higher percentage of isotactic triads than syndiotactic triads (Hetero-I). Vinyl trialkylcarbinyl ethers in polar solvents gave a heterotactic polymer with more syndiotactic triads than isotactic (Hetero-II). Heterotactic PVA was soluble in water and showed characteristics infrared absorptions. Interestingly, Hetero-I PVA showed no iodine color reaction, but Hetero-II showed a much more intense color reaction than a commercial PVA. The mechanism of heterotactic propagation was discussed in terms of the Markóv chain model.     

Influence of microstructure on the hydrodynamic behavior of poly-α-methylstyrene

The theta temperature of poly-α-methylstyrene in cyclohexane has been found to vary with the stereostructure of the polymer. The observed values range from 305.5°K. for highly syndiotactic material (0.95 syndiotactic diads) to 310.0°K. for anio ically polymerized samples (0.67 syndiotactic diads). Results indicate that the unperturbed dimensions of the polymer increase with increasing isotacticity of the chain, whereas the entropy parameter ψ₁, measured in cyclohexane, decreased as the structure became more isotactic. Measurements of the second virial coefficient in toluene showed an increasing interaction with the solvent as the polymer became more syndiotactic.     

Determination of the polymer tacticity from calculation of infrared spectra based on classical molecular simulations

The infrared absorption spectra of poly(tetrafluoroethylene), PTFE, and poly(chlorotrifluoroethylene), PCTFE, are simulated using a method based on a combination of classical molecular simulations of the amorphous polymer phase with Kramers-Kronig relations. The differences and the analogies between experimental and calculated spectra of the non-stereoregular fluoride polymer, PTFE, are first reported. The isotactic and syndiotactic configurations of PCTFE are then investigated. The comparison between experimental and simulated spectra is established on a vibrational analysis. It reveals the preferred syndiotactic configuration adopted by the PCTFE chain.     

Stereoregularity of poly(methyl acrylate)

The stereoregularity of poly(methyl acrylate) and poly(methyl acrylate-αd) was determined from the NMR spectra. A method of quantitative determination of stereoregularity of poly(methyl acrylate) proposed in this paper is based on the fact that in the 100 Mc./sec. NMR spectrum the absorption peaks due to methylene protons in syndiotactic configurations overlap absorptions due to only one of two methylene protons in isotactic configurations. The stereostructure of poly(methy1 acrylates) polymerized with anionic catalysts such as Grignard reagents, n-butyllithium, and LiAlH₄ is generally richer in isotactic diads than in syndiotactic diads. For example, poly(methyl acrylate) polymerized with phenylmagnesium bromide as catalyst at ?20°C. consists of 99% isotactic and 1% syndiotactic diads. In radical polymerization, the isotacticity of poly(methyl acrylate) is independent of polymerization temperature. Poly(methyl acrylates) polymerized with a Ziegler-Natta catalyst consisting of Al(C₂H₅)₂Cl and VCl₄ have configurations similar to those polymerized by radical initiators. The stereoregularity of poly(methyl acrylate-α-d) resembled that of poly(methyl acrylate) polymerized under the same conditions.     

Stereoregulation in the polymerization of methyl α-ethylacrylate by n-BuLi in toluene

The polymerization of methyl α-ethylacrylate was carried out in toluene by n-BuLi at various temperatures. The yield of the polymer decreased with increase in the polymerization temperature and at 30°C and above no polymer was obtained, indicating that the ceiling temperature of this monomer lay between 0 and 30°C. The isotacticity increased with an increase in the polymerization temperature and at 0°C a highly isotactic polymer was obtained. The fractionation of the polymer obtained at ?78°C showed that the polymer was a mixture of isotactic and syndiotactic ones. Upon the addition of a small amount of methanol or water in the polymerization mixture the isotacticity of the polymer increased while the yield decreased. Syndiotactic polymer was obtained in the polymerization by n-BuLi in tetrahydrofuran as well as by diisobutyl aluminum diphenylamide in toluene.     

Thermal and dynamic mechanical relaxation behavior of stereoregular poly(2-hydroxyethyl methacrylate)

Thermal, dynamic mechanical, and dielectric relaxation techniques were used to determine the relaxation behavior of isotactic and syndiotactic poly(2-hydroxyethyl methacrylate) (pHEMA). Activation energies E_a were determined for the dielectric γ relaxation and compared with those of poly(2-methoxyethyl methacrylate) (pMEMA) to determine the influence of hydrogen bonding on side-chain relaxation processes. No difference in E_a was observed between syndiotactic pHEMA and atactic (predominantly syndiotactic) pMEMA. Isotactic pHEMA, however, had E_a + 1 kcal/mole higher than that of syndiotactic pHEMA. This was attributed to improved side-chain packing in the isotactic polymer.     

Conformations et stereoregularite de poly 2 vinyl pyridines—II Etude theorique

The molecular optical anisotropy of isotactic and atactic (anionic) poly 2 vinyl pyridines has been interpreted according to the rotational isomeric state model and in terms of meso and racemic dyads. In the hypothesis of a Bernouillian propagation process, analysis of the results shows that isotactic and atactic compounds contain respectively 98–99% and 9–10% of meso dyads. Therefore the so-called atactic polymer is essentially syndiotactic.     

Identification of a stereoblock poly(methyl methacrylate) sample with a stereocomplex

Acid hydrolysis of a stereoblock poly(methyl methacrylate) sample leads to a mixture of isotactic and syndiotactic poly(methacrylic acid) which can be separated by electrophoresis. The experiment confirms the stereochemical identity between the so-called “stereoblock” poly(methyl methacrylate) and the stereocomplex which syndiotactic and isotactic poly(methyl methacrylate) form in the ratio 2:1. A possible mechanism of replica polymerization is suggested to account for this effect.     

Optoeletronic properties of poly(N‐alkenyl‐carbazole)s driven by polymer stereoregularity

Stereoregular polymers like isotactic poly(N‐butenyl‐carbazole) (i‐PBK), isotactic and syndiotactic poly(N‐pentenyl‐carbazole) (i‐PPK and s‐PPK), and poly(N‐hexenyl‐carbazole) (i‐PHK and s‐PHK) are synthesized using the stereospecific homogeneous “single site” Ziegler‐Natta (Z‐N) catalysts: rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride ( 1 )/methylaluminoxane (MAO) and diphenylmethylidene(cyclopentadienyl)‐(9‐fluorenyl)zirconium dichloride ( 2 )/MAO. Catalytic activity is rationalized by density functional theory (DFT) calculations. All synthesized polymers are fully characterized by NMR, thermal, wide‐angle X‐ray diffraction, and fourier transform infrared spectroscopy analysis. Fluorescence measurements on isotactic and syndiotactic polymer films indicate that all polymers give rise to excimers, both “sandwich‐like” and “partially overlapping.” Excimer formation is essentially driven by the polymer tacticity. Isotactic polymers generate both sandwich‐like and partially overlapping excimers, while syndiotactic polymers give rise especially to partially overlapping ones. A theoretical combined molecular dynamics–time dependent DFT approach is also used to support the experimental results. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 242–251     

NMR spectroscopic,osmometric, and viscometric study of association of syndiotactic poly(methyl methacrylate) in dilute solutions

Association of syndiotactic (s) poly(methyl methacrylates) (PMMAs) in toluene, benzene, and acetonitrile has been studied by NMR spectroscopy, osmometry, and viscometry. It was found that in solutions of highly syndiotactic PMMA in toluene, most of the polymer exists in the associated state. Association takes place by means of stereospecific intermolecular and intramolecular interactions of long parallel syndiotactic sequences. The minimum length of syndiotactic sequences necessary for association of s-PMMA in toluene is 7–8 monomer units. Viscosity data indicate that in dilute solutions the associated structures appear as large formations which do not have the character of compact particles. The formation of the aggregates of PMMA is a relatively slow process. A model of the structure of the aggregates of s-PMMA in toluene is proposed. As compared with that in toluene, the tendency to aggregation in benzene and acetonitrile is negligible. Integral parameters currently used for the characterization of polymer-solvent interaction, like “good” or θ solvent, are not suitable for predicting the tendency of s-PMMA to aggregation. The formation of aggregates evidently has some connection with the effect of the solvent upon the conformational structure of syndiotactic sequences.     

Stereoregularity of poly(isopropyl acrylate) and its racemization during hydrolysis

The diad tacticity of poly(isopropyl acrylate) was measured from the β-proton absorptions of poly(isopropyl acrylate-α,β-d₂) obtained with a 100 MHz NMR spectrometer, and temperature dependence of the tacticity of the polymers obtained by radical polymerization was determined. Enthalpy and entropy differences between isotactic and syndiotactic addition for poly(isopropyl acrylate) were calculated to give the following values: Δ(ΔS) = 0.7 eu; Δ(ΔH) = 0.51 kcal/mole. In the hydrolysis of poly(isopropyl acrylate-α,β-d₂), it was found that the rate of hydrolysis of poly(isopropyl acrylate) was dependent on the molecular weight rather than on the tacticity. As for the rate of racemization during hydrolysis, the rate for syndiotactic polymer was much faster than that for the isotactic polymer. The exchange reaction of deuterium at α-position with hydrogen occurred in all the polymers during hydrolysis reaction.     

Syndiotactic and isotactic poly(tert-butylethylene oxide)

The rate of polymerization of t-BuEO by t-BuOK in DMSO is about one-tenth that of propylene oxide. The slow rate of propagation was accompanied by considerable chain transfer. In the absence of solvent, the polymer obtained was crystalline, different from the isotactic form and therefore must be syndiotactic. The NMR spectra indicate the isotactic polymer exists in solution preferentially in the skew₁ form, while syndiotactic is about 60% skew₁, 40% skew₂. Amorphous polymer accompanying isotactic exists about 50% in the trans conformer, by NMR data.     

Polymerization of D-α-methylbenzyl methacrylate by n-butyllithium and the tacticity and optical rotation of the polymer

D -α-Methylbenzyl methacrylate, [α] = +51.3° (neat), was polymerized by n-butyllithium in toluene–tetrahydrofuran mixtures of various solvent ratios at ?78°C. The polymers obtained were converted into poly(methyl methacrylate)s, which were analyzed for tacticity by high resolution NMR spectroscopy. A linear relationship was obtained between the optical rotation and the isotacticity of poly(D -α-methylbenzyl methacrylate). The extrapolation of the data gave +120° and +99° for [α] of the fully isotactic and syndiotactic polymers, respectively. The copolymerization of the D - and L -isomers in toluene gave copolymers which were less isotactic than the homopolymer of the D -isomer. The optical rotation of the copolymer was proportional to the excess of one isomer in the polymer.     

Nuclear magnetic resonance studies of polymer solutions. I. Poly(methyl methacrylates)

The microscopic interactions of solvent with the diastereoisomeric units of isotactic and syndiotactic poly(methyl methacrylate) have been studied by high-resolution nuclear magnetic resonance. The changes in chemical shifts in various solvents were compared with those of low molecular weight analogs, methyl acetate, and methyl propionate. These changes are caused mainly by the ring-current effect, which has been found to be larger for the low molecular weight analogs than for the polymer. This is especially true when the protons on the polymer backbone are compared with the corresponding ones in the low molecular weight compounds. As one changes from a chloroform solvent to an aromatic solvent, the displacements of the chemical shifts of the polymer can be expressed as percentages of the corresponding shifts of methyl acetate. For syndiotactic poly(methyl methacrylate) in chlorobenzene, benzene, and α-chloronaphthalene, respectively, the percentages are 82, 93, 75 for ester protons; 35, 29, 17 for the backbone methylene protons; and 18, 6.7, 0 for the backbone α-methyl protons. For isotactic poly(methyl methacrylate) in chlorobenzene and benzene, respectively, the percentages are 71, 76 for the ester protons; 41, 38 for the backbone methylene protons; and 41, 32 for the backbone α-methyl protons. These results are discussed in terms of the local stereochemistry of the polymer systems. The exploitation of procedures of this sort in revealing details of polymer behavior in solution indicates dramatic possibilities for future investigations.