Effect of the support and the reduction temperature on the formation of metallic nickel phase in Ni/silica gel precursors of vegetable oil hydrogenation catalysts

Ni/SiO₂ materials with identical composition (SiO₂/Ni = 1.0) have been synthesized by precipitation of Ni(NO₃)₂ · 6H₂O solution with Na₂CO₃ solution on the silica gel, obtained at three different pH values. The present investigation was undertaken in an endeavor to study the effects of the silica gel support type and the reduction temperature on the formation and dispersion of the metallic nickel phase in the reduced Ni/SiO₂ precursors of the vegetable oil hydrogenation catalyst. The physicochemical characterization of the unreduced and reduced precursors has been accomplished appropriately by powder X-ray diffraction, infrared spectroscopy, temperature programmed reduction and H₂-chemisorption techniques. It can be stated that the texture peculiarities of the silica gels used as supports influence on the crystalline state and distribution of the deposited Ni-containing phases during the preparation of the precursors, on the reduction temperature of the investigated solids as well as on the bulk size and surface dispersion of the arising metallic nickel particles. It was shown that two types of Ni²⁺-species are formed during the synthesis procedure, namely basic nickel carbonate-like and Ni-phyllosilicate with different extent of presence, location and strength of interaction. The different location of these species is supposed to result in various strength of Ni-O and Ni-O-Si interaction, thus determining the overall reducibility of the precursors. It was specified that the Ni²⁺-species are strongly bonded to the surface of the silica gel obtained at neutral pH value and weakly bonded to the surface of those prepared in acidic and alkaline conditions. It was established that the precursor, derivates from the silica gel obtained at alkaline conditions, demonstrates both significant reduction of the Ni2+ ions at 430°C and finely dispersed metallic nickel particles on its surface. High dispersion of the metallic nickel might be the crucial reason for achieving of high activity in the vegetable oil hydrogenation.     

Spectrometry: Speciation of Parts PER Billion of Metal Ions Using Silica and C18-Bonded Silica Columns and Graphite Furnace Atomic Absorption Spectrometry

Abstract

It is demonstrated that silica gel columns will quantitatively adsorb free Cu²⁺ and Pb²⁺ ions at pH > 8. These are eluted with 0.1 M HNO₃ but not with methanol. Negatively charged EDTA chelates are not adsorbed. Neutral APDC chelates are partially adsorbed on silica columns, but are quantitatively adsorbed on C18-bonded columns, and are eluted with methanol. The metal ions are partially adsorbed on C18-bonded columns, due to residual silanol groups. A microcolumn (1 mm i.d., 5 cm length) manifold system is described for automatic delivery of eluant (0.12 ml) to a heated atomic absorption graphite atomizer, using either methanol or 0.1 M HNO₃ in methanol eluant, allowing speciation and measurement of parts per billion of metals. These studies demonstrate that by using a mixed column or sequential columns of silica gel and C18-bonded silica, cationic and neutral metal species could be adsorbed, followed by sequential elution and measurement using methanol and then 0.1 M HNO. Negatively charged species could be measured directly in the sample eluant or obtained by difference from a total metal measurement.     

CP/MAS NMR investigations of silica gel surfaces modified with aminopropylsilane

Summary Aminopropyl chemically bonded phases for high performance liquid chromatography (HPLC) have been prepared using mono- and trifunctional methoxyor ethoxysilanes. Three types of silica gel with different surface characteristics were used as support for the chemically bonded phases (CBPs). Surface characteristics of the packings before and after chemical modification were determined by porosity parameters, elemental analysis and CP/MAS NMR spectroscopy.²⁹Si and¹³C CP/MAS NMR investigations gave informations about different interactions between aminosilyl ligands and/or these ligands and/or water molecules condensed in the pores of the silica gel surface. With decreasing pore diameter of the silica gel the proportion of protonated aminopropyl ligand increases.     

Quartz Rod Coated with Modified Silica Gel as a Source of CO and CO2 for Standard Gaseous Mixtures

Quartz rods coated with a thin layer of chemically modified silica gel have been used for the generation of a two-component gaseous standard mixture containing carbon monoxide and carbon dioxide. A new method based on thermal decomposition of immobilized compounds chemically bonded to the surface of silica gel has been used in the generation process. The oxalic acid moiety bonded to the glycydoxypropylsilylated surface of silica gel underwent decarbonylation and decarboxylation at 300°C, yielding carbon monoxide and carbon dioxide. On-line connection of a thermal desorber with the GC/FID enabled calibration of the detector following the process of methanization of CO and CO₂. The following amounts of CO and CO₂ were generated per unit length of the rod: 15.1 × 10⁻⁸ Mol cm⁻¹ (RSD = 5.71%) for CO and 34.2 × 10⁻⁸ Mol cm⁻¹(RSD = 5.16%) for CO₂.     

Diffusion of protons in silica hydrogel

The effect of preparation pH of silica hydrogel on the effective diffusion coefficient of protons in silica hydrogel (D _e , m²/s), on surface area of silica gel (S, m²/s) and on particle size of silica gel (D _p , mm) was studied. Silica hydrosols were obtained by adding water glass to sulfuric acid. The effective diffusion coefficient of proton in silica hydrogel was determined by the method of diffusion from silica hydrogel plane sheet to a stirred solution of a limited volume. A numerical solution was obtained for the diffusion equation using the Regula Falsi method. Regression analyses of experimental data were conducted.Diffusion of protons in silica hydrogel is a complicated process due to a decelerating effect of the porous structure of silica hydrogel and to the accelerating effects of slow ions such as Na⁺ and surface diffusion. The effective diffusion coefficient increased with surface area of silica gel, indicating the diffusion of protons on the surface of the silica particles.     

Material Balance Study of Adsorption of Organic Compounds

It was shown that the structure of a surface complex and the nature of an adsorption bond can be determined from the material balance of adsorption of H⁺and OH^–ions and organic compound. A calculation procedure was considered using adsorption of benzoic acid on silica gel and zirconia as examples. It was established that adsorption of benzoic acid on silica gel was accompanied by the release of H⁺ions resulted from the formation of surface hydrogen bonds, whereas adsorption on zirconia, by the substitution of OH^–ions in coordination sphere of Zr(IV).     

Extraction of metal ions using chemically modified silica gel: a PIXE analysis

Organic ligand with carboxyhydrazide functional group was immobilised on the surface of silica gel and the metal binding capacity of the ligand-embedded silica was investigated. The functional group was covalently bonded to the silica matrix through a spacer of methylene groups by sequential reactions of silica gel with dibromobutane, malonic ester and hydrazine in different media. Surface area value of the modified silica was determined. The changes in surface area were correlated with the structural change of the silica surface due to chemical modifications. A mixture solution of metal ions [K(I),Cr(III),Co(II),Ni(II),Cu(II),Zn(II),Hg(II) and U(VI)] was treated with the ligand-embedded silica in 10(-3) M aqueous solution. The measurement of metal extraction capacity of the silica based ligand was done by multielemental analysis of the metal complexes thus formed by using Proton Induced X-ray Emission (PIXE) technique.     

Surface Structure and Catalytic Performance of CuCl/SiO2-Al2O3 Catalysts for Methanol Oxidative Carbonylation

Aluminum was doped into amorphous silica gel to modify its surface structure. The obtained SiO₂-Al₂O₃ support was used to prepare the CuCl/SiO₂-Al₂O₃ catalyst by solid-state ion exchange, and the catalyst activity for liquid-phase oxidative carbonylation of methanol to dimethyl carbonate was investigated. The results showed that the prepared SiO₂-Al₂O₃ support kept the amorphous structure of the silica gel. The BET specific surface area of the silica gel was decreased to 200 m²/g, and the surface acid sites (including Brønsted acid sites) were increased. In the CuCl/SiO₂-Al₂O₃ catalyst, CuCl was not only dispersed on surface but also was ion exchanged with surface Brønsted acid sites of the SiO₂-Al₂O₃ support to form Cu⁺ species, which resulted in a decrease in BET specific surface area to 148 m²/g. These two kinds of Cu⁺ species on the catalyst surface were both active centers for the oxidative carbonylation of methanol to dimethyl carbonate. When the catalyst was prepared with Si/Al molar ratio of 5 and was calcined at 500 °C, the selectivity and space-time yield of dimethyl carbonate reached 74% and 1.27 g/(g·h), respectively.     

Separation of carbohydrates by liquid chromatography on silica gel,adding adsorption modificators to the eluent

Summary For the separation of carbohydrates by liquid chromatography, utilizing the intermolecular interaction with amino groups on the surface of the adsorbent, two types of adsorbents were used: silica gel modified by adding to the eluent a diamine, and a chemically bonded phase prepared by the reaction of -aminopropyl triethoxy silane with silica gel. Mono- di- and trisaccharides could be separated on silica gel modified by the adsorption of piperazin and ethylene diamine from the eluent. The separation capacity of columns packed with silica gel with bonded NH₂ groups and with silica gel having diamines adsorbed on its surface is similar. The retention volumes of 15 carbohydrates were measured on columns containing silica gel with hydroxylated surface and on silica gel modified with piperazin from the eluent consisting of acetone-water. Comparison of acetone-water and acetonitrile-water as the eluent showed that the former is also suitable for the analysis of carbohydrates.     

Laws and mechanism of adsorption of cations by different ion-exchange forms of silica gel

Using radioactive tracer method, the regularities of adsorption of over 30 mono-, di- and trivalent cations including transition metal and lanthanide ions on the H, Ca- and Al-forms of silica gel are established. It has been shown that the affinity of cations of the same charge to the silica gel surface depends both on the nature of the adsorbing ion and the nature of exchangeable cation on the surface. Adsorption of alkali earth metal ions on the Ca-form of silica gel increases with a decrease of their radius i.e. an inversion of the sequence of adsorption compared to H- or Al-form of this adsorbent or polymeric cation-exchange resins takes place. For lanthanide ions the sequence of adsorption is the same for all ion-exchange forms of the silica gel studied, namely, an increase of adsorption with a decrease of their crystallographic radius, i.e. from La ³⁺ to Lu ³⁺ takes place. The laws observed are explained by taking into account the fact that adsorption of cations by silica gel is determined by both electrostatic interactions and additional covalent/donor–acceptor interactions between the surface and cations. The latter is due to formation of π-bonds between the electron pair in surface oxygen and vacant p-, d- or f-orbital of adsorbing cations.     

High-performance liquid chromatography of metal ions on a bonded stationary phase

Summary High performance liquid chromatography was used to separate Cu²⁺, Ni²⁺, and Zn²⁺ ions. A column packed with a -diketone bonded phase on silica gel and a mobile phase composed of trifluoroacetylacetone in acetone was used for the separation. After post-column reaction with a color-forming reagent, the metals were detected by absorption in the visible region.Currently assigned to 1155th Technical Operations Squadron, McClellan Air Force Base, California, 95652, USA     

Isocratic Separation of Dansylated Biogenic Amines on a C8‐Bonded Silica Column under the LC Elution of Methanol‐Based Mobile Phase

Under the elution of methanol‐based mobile phase, the isocratic resolution of 12 biogenic amines, including 1 aromatic, 2 heterocyclic and 9 aliphatic amines, as the dansylated derivatives has been accomplished in less than 25 minutes on a 15 cm C₈‐bonded column. The resolution can not be reproduced on other examined alkyl‐bonded phases (e.g., C₄ and C₁₈) under the same chromatographic conditions, or in the reversed‐phase mode. The retention, mainly as a result of hydrophobic interaction between analyte and stationary phase, can be adjusted by varying the percentage of methanol in the mobile phase. Also, incorporating acetic acid as additive to the mobile phase to protonate the analyte and silanol groups that are little shielding on the surface of silica gel reduces the dipole‐dipole interaction, and thus the retention scale, which in turn deteriorates the resolution. Furthermore, the elution reversal is plausible for some of analytes as a greater percent of acetic acid is used in the elution. Values of correlation coefficients (R²) range between 0.9995 and 0.9996, indicating good linearity.     

Polyamine-substituted epoxy-grafted silica for aqueous metal recovery

Glycidoxypropyltriethoxysilane (GPS) was used as a reactive silane to graft metal- complexing ligands onto silica gel in aqueous media under mild conditions. The synthesis entailed the reaction of GPS with silica gel, followed by grafting polyamine onto the epoxy functional group. GPS was added to silica gel in ethanol with 5 vol. % water and the mixture was air-dried for 24 h. Subsequently, excess amounts of polyamines: triethylenetetramine, tetraethylenepentamine, and pentaethylenehexamine were individually added to the silanised silica, followed by solvent evaporation and ovendrying at 60°C. The ligand-grafted silica gel particles showed a rapid heavy metal uptake in batch or flow-through experiments with capacities reaching 0.1 mmol g⁻¹ for copper, zinc, cadmium, or lead ions. Columns packed with the modified particles could be readily regenerated by acid-washing with only a small decrease in activity. The particles could be used for the colourimetric detection of heavy metal pollution or for pre-concentration for analytical purposes. Competition between Cu²⁺, Zn²⁺, Pb²⁺, and Cd²⁺ ions for the three synthesised silica showed that Cu²⁺ ions were adsorbed more strongly than the other metal ions. The general method developed can be applied to graft other molecules with terminal amino groups for other purposes.     

Chemically-bonded stationary phases for thin-layer chromatography of metal ions

Summary A numer of bonded stationary phases were investigated for the separation of Cd²⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ by thin-layer chromatography. The effect of structure, surface loading, type of silica gel and mobile phase concentration was considered.     

Preparation of Various Bonded Phases for HPLC Using Monochlorosilanes

Abstract

Monochlorosilanes have been prepared with yields of about 80% through a catalytic hydrosilylation of terminal olefins. Subsequently, the silanes are chemically bonded to silica to obtain: (i) n-octyldimethylsilyl bonded phases with reproducible surface coverage ranging from 0.8 to 3.5 μmol/m², (ii) propyldimethylsilyl bonded phases with different functional groups at the γ-position, all showing a nearly equal surface coverage of some 3.3 μmol/m², and (iii) n-alkyldimethylsilyl bonded phases with chainlengths ranging from 1 to 22 carbon atoms and with surface coverages ranging from 3.9 μmol/m² for RP-1 to 3.0 μmol/m² for the RP-22 bonded phase. A simplified model based on the pore structure of silica allows an explanation and estimation of the maximum surface coverage as a function of the chainlength of the bonded phase.     

Ion Chromatography on Poly(Crown Ether)-Modified Silica Possessing High Affinity For Sodium

Abstract

Stationary phases which have great affinity for Na⁺ were synthesized by incorporating 12-crown-4 polymer on silica gel for liquid chromatography of alkali and alkaline-earth metal ions. The stationary phases interact with Na+ most strongly of all alkali metal ions as expected, and the retention times on liquid chromatography of alkali metal ions were in the sequence Li⁺ < Cs⁺ < Rb⁺ < K⁺ < Na⁺. On the stationary phase, a mixture of Li⁺, Na⁺, and K⁺ can be separated completely by the elution with water/methanol mixture. By the use of spherical type silica gel instead of irregular type one and by effective end-capping of the residual silanol groups, the peak symmetry was improved significantly.     

Superparamagnetic behavior of iron oxides supported on porous silica gels

Spinel iron oxide (Fe₃O₄-γ-Fe₂O₃) particles were supported on microbeads of silica gel by the calcination of the silica gel base adsorbing citric acid and Fe³⁺ ions. The X-ray diffraction patterns and the⁵⁷Fe Mössbauer spectra measured for the spinel iron oxide indicated that the particle size of the oxide was regulated by the mean pore diameter (4–82 nm) of the silica gel support employed. In the case of α-Fe₂O₃ particles prepared by using the same silica gel beads, it was revealed by the Mössbauer spectra and the electron micrographs that there were relatively large particles of the oxide on the surface of the beads, in addition to the particles in the silica gel micropores.     

Solid-phase extraction of trace Cu(II) Fe(III) and Zn(II) with silica gel modified with curcumin from biological and natural water samples by ICP-OES

Silica gel was firstly functionalized with aminopropyltrimethoxysilane obtaining the aminopropylsilica gel (APSG). The APSG was reacted subsequently with curcumin yielding curcumin-bonded silica gel (curcumin-APSG). This new bonded silica gel was used for separation, pre-concentration and determination of Cu(II), Fe(III), Zn(II) in biological and natural water samples by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective adsorption of trace levels of metal ions were optimized with respect to different experimental parameters using batch and column procedures in detail. The optimum pH value for the separation of metal ions simultaneously on the newly sorbent was 4.0. Complete elution of the adsorbed metal ions from the sorbent surface was carried out using 2.0 mL of 0.1 mol L^− 1 of HCl. Common coexisting ions did not interfere with the separation and determination at pH 4.0. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 0.63, 0.46 and 0.37 mmol g^− 1 for Cu(II), Fe(III) and Zn(II) respectively. The time for 95% sorption for Cu(II) Fe(III) and Zn(II) was less than 2 min. The detection limits of the method defined by IUPAC was found to be 0.12, 0.15 and 0.40 ng mL^− 1 for Cu(II), Fe(III) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was lower 3.0% (n = 5). The procedure was validated by analyzing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. This sorbent was successfully employed in the separation and pre-concentration of trace Cu(II), Fe(III) and Zn(II) from the biological and natural water samples yielding 75-fold concentration factor.     

7种胺基键合硅胶的制备及其对重金属Pb2+的吸附

制备了氨丙基键合硅胶（SiO₂-N）、乙二胺-N-丙基键合硅胶（SiO₂-2N）、二乙烯三胺基键合硅胶（SiO₂-3N）、三乙烯四胺基键合硅胶（SiO₂-4N）、四乙烯五胺基键合硅胶（SiO₂-5N）、五乙烯六胺基键合硅胶（SiO₂-6N）和聚乙烯亚胺基键合硅胶（SiO₂-nN）,一步法制备的SiO₂-N和SiO₂-2N的胺基键合密度高达2.07 mmol/g和1.71mmol/g,两步法制备的SiO₂-nN的胺基键合密度为0.02mmol/g,其余胺基键合硅胶中胺基密度约为0.50mmol/g。这7种胺基键合硅胶被用于水溶液中常见重金属离子Pb²⁺的吸附研究。结果表明,在30℃条件下,分别加入10 mL 400 mg/L的Pb²⁺溶液（pH 5）和20 mg胺基键合硅胶进行吸附,10 h后,Pb²⁺吸附量达到最大,吸附过程符合Freundlich等温方程。SiO₂-N、SiO₂-2N、SiO₂-3N、SiO₂-4N、SiO₂-5N、SiO₂-6N和SiO₂-nN对Pb²⁺的吸附量依次为131.28、138.98、85.37、75.22、61.87、79.12和114.06 mg/g,这些胺基键合硅胶在吸附Pb²⁺方面均非常具有潜力。     

New Stationary Phase Prepared by Immobilization of a Copper-Amine Complex on Silica and Its Use for High Performance Liquid Chromatography

Chromatographic silica (10 μm) was chemically modified with the silylating agent: [3-(2-aminoethyl)aminopropyl]trimethoxysilane (AEAPTS). The reaction product was characterized by elemental analysis and infrared and ¹³C and ²⁹Si NMR spectra. The chemically modified silica was treated with Cu(II) in methanol medium. This cation was strongly adsorbed through complexation by the pendant ethylenediamine groups attached to the silica surface. The complex formed on the silica surface was shown to be stable in both aqueous and non-aqueous media. The aim of Cu(II) immobilization is to use this new material as a stationary phase in High Performance Liquid Chromatography (HPLC). Separations of synthetic mixtures of aromatic amines and of polyaromatic hydrocarbons were undertaken using 150×3.9 mm HPLC columns packed with the modified silica, with and without copper ions, to follow the influence of the cation on the chromatographic separation and to verify the efficiency of the new stationary phase for HPLC.