Gold nanoparticle probes for the detection of mercury, lead and copper ions

Monitoring the levels of potentially toxic metal (PTM) ions (e.g., Hg(2+), Pb(2+), Cu(2+)) in aquatic ecosystems is important because these ions can have severe effects on human health and the environment. Gold (Au) nanomaterials are attractive sensing materials because of their unique size- and shape-dependent optical properties. This review focuses on optical assays for Hg(2+), Pb(2+), and Cu(2+) ions using functionalized Au nanomaterials. The syntheses of functionalized Au nanomaterials are discussed. We briefly review sensing approaches based on changes in absorbance resulting from metal ion-induced aggregation of Au nanoparticles (NPs) or direct deposition of metal ions onto Au NPs. The super-quenching properties of Au NPs allow them to be employed in 'turn on' and 'turn off' fluorescence approaches for the sensitive and selective detection of Hg(2+), Pb(2+), and Cu(2+) ions. We highlight approaches based on fluorescence quenching through analyte-induced aggregation or the formation of metallophilic complexes of Au nanodots (NDs). We discuss the roles of several factors affecting the selectivity and sensitivity of the nanosensors toward the analytes: the size of the Au nanomaterial, the length and sequence of the DNA or the nature of the thiol, the surface density of the recognition ligand, and the ionic strength and pH of the buffer solution. In addition, we emphasize the potential of using new nanomaterials (e.g., fluorescent silver nanoclusters) for the detection of PTM ions.     

Synthesis, physical studies and uptake behavior of: copper(II) and lead(II) by Schiff base chelating resins

Two new chelating resins possessing multiple functional groups capable of coordinating with several metal ions are reported. The resins were synthesized by condensing Schiff bases derived from 2-aminophenol, 2-hydroxy-5-chloroaniline and terephthaldehyde with formaldehyde in an alkaline medium. The effects of pH and contact time of the Cu(2+) and Pb(2+) in aqueous solutions on the uptake behavior of the resins were studied. The metal ion uptake behavior of the resins was investigated by the batch method. Both the uptake and the selectivity of the resins towards the investigated metal ions were related to the structure of the resins, type of the metal ion and the uptake conditions. The resins showed maximum uptake capacity for Cu(2+) and Pb(2+) at pH 10. Cu(2+) was seen to undergo preferential adsorption in separate and mixture solutions of Cu(2+) and Pb(2+). Kinetic studies for the resins using Langmiur equation were also performed. The Schiff base monomers and their formaldehyde resins were characterized by elemental analyses, FTIR and (1)H NMR spectroscopy. The thermal stability of the resins was studied using TGA/DTG analysis.     

Lead(II) complex formation with glutathione

A structural investigation of complexes formed between the Pb(2+) ion and glutathione (GSH, denoted AH(3) in its triprotonated form), the most abundant nonprotein thiol in biological systems, was carried out for a series of aqueous solutions at pH 8.5 and C(Pb(2+)) = 10 mM and in the solid state. The Pb L(III)-edge extended X-ray absorption fine structure (EXAFS) oscillation for a solid compound with the empirical formula [Pb(AH(2))]ClO(4) was modeled with one Pb-S and two short Pb-O bond distances at 2.64 ± 0.04 and 2.28 ± 0.04 ?, respectively. In addition, Pb···Pb interactions at 4.15 ± 0.05 ? indicate dimeric species in a network where the thiolate group forms an asymmetrical bridge between two Pb(2+) ions. In aqueous solution at the mole ratio GSH/Pb(II) = 2.0 (C(Pb(2+)) = 10 mM, pH 8.5), lead(II) complexes with two thiolate ligands form, characterized by a ligand-to-metal charge-transfer band (LMCT) S(-) → Pb(2+) at 317 nm in the UV-vis spectrum and mean Pb-S and Pb-(N/O) bond distances of 2.65 ± 0.04 and 2.51 ± 0.04 ?, respectively, from a Pb L(III)-edge EXAFS spectrum. For solutions with higher mole ratios, GSH/Pb(II) ≥ 3.0, electrospray ionization mass spectroscopy spectra identified a triglutathionyllead(II) complex, for which Pb L(III)-edge EXAFS spectroscopy shows a mean Pb-S distance of 2.65 ± 0.04 ? in PbS(3) coordination, (207)Pb NMR spectroscopy displays a chemical shift of 2793 ppm, and in the UV-vis spectrum, an S(-) → Pb(2+) LMCT band appears at 335 nm. The complex persists at high excess of GSH and also at ～25 K in frozen glycerol (33%)/water glasses for GSH/Pb(II) mole ratios from 4.0 to 10 (C(Pb(2+)) = 10 mM) measured by Pb L(III)-edge EXAFS spectroscopy.     

Adsorption of some bivalent heavy metal ions from aqueous solutions by manganese nodule leached residues

The leached residue, generated after selective extraction of Cu, Ni, and Co in sulfur dioxide-ammonia leaching of manganese nodules, was characterized and batch isothermal adsorption experiments were conducted at ambient temperature to evaluate the effectiveness of the water-washed leached residue for removal of different bivalent metal ions from aqueous synthetic solutions. The effects of pH, initial metal ion concentrations, amount of adsorbent, interfering ions, and heat treatment were also investigated. The uptake of metal ions increased with increasing pH. Under identical conditions the adsorption capacity increased in the order Cd(2+)相似文献   

Highly sensitive and fast responsive fluorescence turn-on chemodosimeter for Cu2+ and its application in live cell imaging

A rhodamine B derivative 4 containing a highly electron-rich S atom has been synthesized as a fluorescence turn-on chemodosimeter for Cu(2+). Following Cu(2+)-promoted ring-opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu(2+); this suggests that chemodosimeter 4 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu(2+). Importantly, 4 can selectively recognize Cu(2+) in aqueous media in the presence of other trace metal ions in organisms (such as Fe(3+), Fe(2+), Cu(+), Zn(2+), Cr(3+), Mn(2+), Co(2+), and Ni(2+)), abundant cellular cations (such as Na(+), K(+), Mg(2+), and Ca(2+)), and the prevalent toxic metal ions in the environment (such as Pb(2+) and Cd(2+)) with high sensitivity (detection limit < or =10 ppb) and a rapid response time (< or =1 min). Moreover, by virtue of the chemodosimeter as fluorescent probe for Cu(2+), confocal and two-photon microscopy experiments revealed a significant increase of intracellular Cu(2+) concentration and the subcellular distribution of Cu(2+), which was internalized into the living HeLa cells upon incubation in growth medium supplemented with 50 muM CuCl(2) for 20 h.     

A simple but highly sensitive and selective colorimetric and fluorescent probe for Cu2+ in aqueous media

In this paper, CN-DPA was prepared as an effective colorimetric and fluorescent probe for copper ions (Cu(2+)) in aqueous solution. It exhibits good sensitivity and selectivity for Cu(2+) over other metal ions both in aqueous solution and on a simple colorimetric paper-made test kit. Upon addition of Cu(2+), a remarkable color change from purple to colorless was easily observed by the naked eye, and a fluorescence quenching was also determined. Furthermore, CN-DPA can be used to quantitatively detect Cu(2+). The linear range was 0-5 μM determined by absorption spectrometry. All these selective and sensitive results indicate that CN-DPA could meet the selective requirements for biomedical and environmental application and be sensitive enough to detect Cu(2+) in environmental water samples, even in drinking water, which has a limit of 20 μM defined by the U.S. Environmental Protection Agency.     

Visible-near-infrared and fluorescent copper sensors based on julolidine conjugates: selective detection and fluorescence imaging in living cells

We present novel Schiff base ligands julolidine-carbonohydrazone 1 and julolidine-thiocarbonohydrazone 2 for selective detection of Cu(2+) in aqueous medium. The planar julolidine-based ligands can sense Cu(2+) colorimetrically with characteristic absorbance in the near-infrared (NIR, 700-1000 nm) region. Employing molecular probes 1 and 2 for detection of Cu(2+) not only allowed detection by the naked eye, but also detection of varying micromolar concentrations of Cu(2+) due to the appearance of distinct coloration. Moreover, Cu(2+) selectively quenches the fluorescence of julolidine-thiocarbonohydrazone 2 among all other metal ions, which increases the sensitivity of the probe. Furthermore, quenched fluorescence of the ligand 2 in the presence of Cu(2+) was restored by adjusting the complexation ability of the ligand. Hence, by treatment with ethylenediaminetetraacetic acid (EDTA), thus enabling reversibility and dual-check signaling, julolidine-thiocarbonohydrazone (2) can be used as a fluorescent molecular probe for the sensitive detection of Cu(2+) in biological systems. The ligands 1 and 2 can be utilized to monitor Cu(2+) in aqueous solution over a wide pH range. We have investigated the structural, electronic, and optical properties of the ligands using ab initio density functional theory (DFT) combined with time-dependent density functional theory (TDDFT) calculations. The observed absorption band in the NIR region is attributed to the formation of a charge-transfer complex between Cu(2+) and the ligand. The fluorescence-quenching behavior can be accounted for primarily due to the excited-state ligand 2 to metal (Cu(2+)) charge-transfer (LMCT) processes. Thus, experimentally observed characteristic NIR and fluorescence optical responses of the ligands upon binding to Cu(2+) are well supported by the theoretical calculations. Subsequently, we have employed julolidine-thiocarbonohydrazone 2 for reversible fluorescence sensing of intracellular Cu(2+) in cultured HEK293T cells.     

Simple detection of trace Pb2+ by enrichment on cerium phosphate membrane filter coupled with color signaling

A Pb(2+) selective membrane filter was fabricated from the fibrous CeO(H(2)PO(4))(2).2H(2)O (CeP) crystals by blending with cellulose fiber. Enrichment of ppb level of Pb(2+) was achieved simply by filtration of aqueous sample solution through the membrane filter. Pb(2+) was strongly retained on the membrane filter by accommodation into the interlayer gallery of a CeP crystal. Visual detection of the enriched Pb(2+) was achieved by subsequent color signaling as PbS deposit upon treatment of the membrane filter with 3% Na(2)S solution. The analytical procedure and sample treatment conditions were optimized with respect to pH of the sample solution, filtration rate and masking of interfering ions. Detection of 20 ppb of Pb(2+) was not interfered by the presence of 1000-fold of Ca(2+), Mg(2+), and up to 100-fold of Fe(3+)and Cu(2+) by masking with 1 x 10(-3) mol dm(-3) of iminodiacetic acid (IDA). Most anions including phosphate (20 000 times) did not interfere with the determination of Pb(2+). The present simple method was applied to the determination of Pb(2+) in real samples like mine valley water.     

Controllable organization of a carboxylic acid type gemini surfactant at different pH values by adding Copper(II) ions

The gemini surfactant sodium 4,8-dioctyl-3,9-dioxo-6-hydroxy-4,8-diaza-1,11-undecanedicarboxylate (SDUC), bearing two carboxylic headgroups and two hydrocarbon chains, has been synthesized, and its self-organization characteristics at strong basic and neutral environments have been studied. The results reveal that a transition from micelles to vesicles in SDUC aqueous solution occurs when the pH drops from 12.0 to 7.0. When a small amount of Cu(2+) ion is added to the SDUC solutions at both pH 12.0 and 7.0, remarkable transformations were observed within the SDUC aggregate structures. At pH 12.0, micelles transform into vesicles as Cu(2+) is added, while the vesicles of SDUC are formed at pH 7.0 and these small vesicles tend to fuse into larger ones slowly. Moreover, these SDUC vesicles at pH 7.0 undergo a relatively fast fission process when Cu(2+) is added in. An attempt has been made to explain the mechanism of these transformations.     

Multifunctional modified silver nanoparticles as ion and pH sensors in aqueous solution

Silver nanoparticles capped with mercaptoacetic acid and 2-aminoethanethiol short-chain alkanethiols were prepared by a one-step method in aqueous solution for monitoring pH and a range of heavy metal ions. The mode of transduction is optical, based on the change in aggregation of the nanoparticles in solution. Because of the different ionic interactions between the modified nanoparticles, these nanoparticle sensors can rapidly detect Pb(2+), Cu(2+) and Fe(2+), with detection limits as low as 1 × 10(-5) M, 5 × 10(-7) M and 5 × 10(-5) M respectively, as well as having the ability to detect Cu(2+) ions from Pb(2+) and Fe(2+). Furthermore, the same functionalised nanoparticles are also sensitive to pH; exhibiting a good linear dynamic response between pH 1 and 10.     

Formation of ternary poly(acrylic acid)-surfactant-Cu2+ complexes in aqueous solution: quenching of pyrene fluorescence and pH-controlled "on-off" emitting properties

The formation of binary and ternary complexes of poly(acrylic acid) (PAA) with N, N, N, N-dodecyltrimethylammonium chloride (DTAC) and/or Cu (2+) ions is investigated in dilute aqueous solution through turbidimetry, viscometry, and pyrene fluorescence probing. It is shown that the PAA-DTAC and PAA-Cu (2+) complexation as well as the formation of ternary PAA-DTAC-Cu (2+) complexes are controlled from the pH of the aqueous solution. A pronounced quenching of the emission of pyrene is observed when ternary PAA-DTAC-Cu (2+) complexes are formed, as a result of the close proximity of Cu (2+) ions (complexed along the polymer chain) and the probe (solubilized in the hydrophobic mixed polymer-surfactant aggregates), as indicated from the corresponding Stern-Volmer plots. A significant quenching is also observed when poly(sodium styrene sulfonate) is used instead of PAA, indicating that electrostatically bound Cu (2+) ions are still effective quenchers of the emission of the probes under similar conditions. Finally, it is demonstrated that the formation-deformation of the ternary PAA-DTAC-Cu (2+) complexes upon changing pH may act as a pH-controlled "on-off" switch of the emission of pyrene in aqueous solution.     

Chemometric analysis of voltammetric data on metal ion binding by selenocystine

The behavior of selenocystine (SeCyst) alone or in the presence of various metal ions (Bi(3+), Cd(2+), Co(2+), Cu(2+), Cr(3+), Ni(2+), Pb(2+), and Zn(2+)) was studied using differential pulse voltammetry (DPV) over a wide pH range. Voltammetric data matrices were analyzed using chemometric tools recently developed for nonlinear data: pHfit and Gaussian Peak Adjustment (GPA). Under the experimental conditions tested, no evidence was found for the formation of metal complexes with Bi(3+), Cu(2+), Cr(3+), and Pb(2+). In contrast, SeCyst formed electroinactive complexes with Co(2+) and Ni(2+) and kinetically inert but electroactive complexes with Cd(2+) and Zn(2+). Titrations with Cd(2+), Co(2+), Ni(2+), and Zn(2+) produced data that were reasonably consistent with the formation of stable 1:1 M(SeCyst) complexes.     

Observation of characteristic IR band assignable to dimerized copper ions in montmorillonite

Copper ion-exchanged montmorillonite clays, which had been prepared by ion exchange in an aqueous solution of CuCl(2) at a temperature above 323 K, exhibited the characteristic IR band in the region 3360-3310 cm(-1). No such bands were observed for the samples prepared by using different ion-exchange solutions and at different temperatures. From the spectroscopic observations, it was revealed that the ion-exchanged copper ions (Cu(2+)) are in the form of dimerized species by bridging two hydroxyls, [Cu(2+) <(OH(-)(2) > Cu(2+)], in montmorillonite.     

EPR and speciation simulation study of Cu2+ complexes in an amine-based aqueous precursor system used for preparation of superconducting YBCO coatings

In this work, we investigate the chemistry for an aqueous acetate-triethanolamine-ammonia based YBa(2)Cu(3)O(7-δ) (YBCO) precursor system. These precursor solutions are suited for the chemical solution deposition of superconducting YBCO layers on top of single crystal SrTiO(3) or buffered NiW tapes. The development of this kind of precursor inks often involves trial-and-error experimenting and thus is very time-consuming. To reduce labwork to the minimum, the theoretical prediction of pH stability limits and the complexation behaviour of the different metal ions and complexants in the inks are very important. For this purpose, we simulated, based on literature values, the complexation behaviour of Cu(2+) in the aqueous precursor solutions as a function of pH. To validate the used model, we performed potentiometric pH titrations for solutions with similar composition and checked the correctness of fit between experiment and model. The generated complexometric results are coupled with X-band EPR spectra to further confirm the results. EPR spectra for fully prepared precursor solutions as well as for Cu(2+) reference solutions containing only one type of ligand (acetate, triethanolamine or ammonia) were investigated as a function of pH. We find that, in line with speciation simulation, only acetates are actively complexing the Cu(2+) ions at pH values below 7, while when reaching higher pH levels mainly triethanolamine complexes are formed. Over the entire pH range, no trace of free Cu(2+)or Cu(OH)(2), possibly creating precipitation during gelation and thus complicating further processing, could be found.     

Electrochemical behavior and voltammetric determination of paracetamol on Nafion/TiO2-graphene modified glassy carbon electrode

A simple and sensitive method was developed for the detection of mercury ions with quartz crystal microbalance (QCM), based on the specific thymine-Hg(2+)-thymine (T-Hg(2+)-T) interaction and gold nanoparticle-mediated signal amplification. To enhance the sensitivity of detection a sandwich hybridization approach was adopted in this work. The QCM gold surface was modified with the probe SH-oligonucleotides (Oligo-1) and 6-Mercapto-1-hexanol to form an active surface for the hybridization of a longer ss-DNA (Oligo-2), and then Oligo-3 hybridazated with an excess and matching part of Oligo-2. In all oligonucleotides, there existed T bases. In the presence of Hg(2+) ions, special T-Hg(2+)-T reaction greatly enhanced the hybridization of oligonucleotides and detection sensitivity. The gold nanoparticle (Au NPs) amplifier method further increased the sensitivity of detection. A detection sensitivity of 5nM Hg(2+) was obtained in the QCM system, whereas other coexisting metal ions (such as Ni(2+), Mg(2+), Co(2+), Cr(3+), Pb(2+), Cd(2+), Mn(2+), Ba(2+)) had no significant interference. This method reveals a new approach for the manufacture of a kind of simple and low cost sensors for the Hg(2+) detection.     

Label-free colorimetric sensing of cobalt(II) based on inducing aggregation of thiosulfate stabilized gold nanoparticles in the presence of ethylenediamine

As a sensitive and selective analytical technique, gold nanoparticles-based colorimetric sensing was characterized by its simplicity and cost-effectiveness. Specific methods have been extensively developed for different targets in diverse samples. In this study, a label-free method for sensing Co(2+) in aqueous solutions was described. The target was achieved by the induced aggregation of thiosulfate (S(2)O(3)(2-)) stabilized gold nanoparticles (AuNPs) in the presence of ethylenediamine (en). Co(2+) first reacted with en and formed complexes of Co(en)(3)(2+) in aqueous solutions, which was followed by the oxidation of Co(en)(3)(2+) to Co(en)(3)(3+) by dissolved oxygen. Co(en)(3)(3+) then attacked S(2)O(3)(2-) ligands adsorbed on the AuNPs' surfaces, forming positively charged (en)(2)CoS(2)O(3)(+) on the AuNPs' surfaces, which reduced the surface charges of AuNPs and induced the aggregation of AuNPs. The process was accompanied by a red-shift in the adsorption spectrum and a visible colour change from wine red to blue. Potential effects of relevant experimental conditions, including pH, concentrations of S(2)O(3)(2-) and en, and incubation time were evaluated for optimization of the method. The proposed method is sensitive (LOD = 0.0 4 μM or 2.36 ppb) and selective (by at least 100-fold over other metal ions except for Cu(2+)) toward Co(2+) with a linear range from 0.1 to 0.7 μM. The cost-effective method allows rapid and simple determination of the concentrations of Co(2+) ions in drinking water.     

Interdependence of Anion and Cation Exchanges in Calcium Hydroxyapatite: Pb(2+) and Cl(-)

The ion exchange of Pb(2+) and Cl(-) into calcium hydroxyapatite from aqueous solutions is studied at 293 K. Although the exchange of Cl(-) into CaHAp and PbHAp was not observed, in the presence of both Pb(2+) and Cl(-) in aqueous solution the exchange of both Pb(2+) and Cl(-) into CaHAp occurred, and, at least at intermediate concentrations of HCl, a proportionality between the sorbed quantities of these two ions was observed. The dissolution of CaHAp is shown to be dependent upon the pH, while the quantity of Pb(2+) exchanged into the solid is not a function of the proton content; consequently, the exchange is not primarily a dissolution-precipitation process. Copyright 1999 Academic Press.     

Incorporation of triazole into a quinoline-rhodamine conjugate imparts iron(iii) selective complexation permitting detection at nanomolar levels

Two new rhodamine based probes 1 and 2 for the detection of Fe(3+) were synthesized and their selectivity towards Fe(3+) ions in the presence of other competitive metal ions tested. The probe 1 formed a coloured complex with Fe(3+) as well as Cu(2+) ions and revealed the lack of adequate number of coordination sites for selective complexation with Fe(3+). Incorporation of a triazole unit to the chelating moiety of 1 resulted in the probe 2, that displayed Fe(3+) selective complex formation even in the presence of other competitive metal ions like Li(+), Na(+), K(+), Cu(2+), Mg(2+), Ca(2+), Sr(2+), Cr(3+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), Hg(2+) and Pb(2+). The observed limit of detection of Fe(3+) ions (5 × 10(-8) M) confirmed the very high sensitivity of 2. The excellent stability of 2 in physiological pH conditions, non-interference of amino acids, blood serum and bovine serum albumin (BSA) in the detection process, and the remarkable selectivity for Fe(3+) ions permitted the use of 2 in the imaging of live fibroblast cells treated with Fe(3+) ions.     

Salt effects on the apparent stability of the cucurbit[7]uril-methyl viologen inclusion complex

The effects of the medium ionic composition on the apparent equilibrium association constant (K) for the formation of a 1:1 inclusion complex between the guest methyl viologen (MV(2+)) and the host cucurbit[7]uril (CB7) were studied in aqueous solutions. The K values were found to decrease with increasing ionic strength, with more pronounced effects for solutions containing divalent Ca(2+) ions than for solutions containing monovalent Na(+) ions. The competing ion-dipole interactions between Ca(2+) or Na(+) and MV(2+) ions appear to be responsible for the remarkable modulation of the K values observed in this work.     

Functionalization of organic membranes by polyelectrolyte multilayer assemblies: application to the removal of copper ions from aqueous solutions

The functionalization of an organic polyethersulfone membrane (PES) was performed by alternating deposition of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrene sulfonate) (PSS), leading to the formation of a polyelectrolyte multilayer film (PEM). The resulting assembly was characterized by tangential streaming potential measurements to determine the charge of the modified membranes as a function of the polyelectrolyte solution concentration and as a function of the immersion time of the membrane in the polyelectrolyte solutions. Then, the modified membranes were used to perform the ultrafiltration of aqueous solutions containing copper(II) ions. Different operating conditions were tested including: polyelectrolyte concentration, polyelectrolyte nature, thickness of the PEM film or pH of the Cu(2+) solutions. These filtration experiments demonstrated that it was possible to obtain a satisfactory retention of the copper ions (88%), thus proving that this type of assembly can be useful for the removal of copper ions from contaminated aqueous solutions.