Design and development of a new transformable wheel used in amphibious all-terrain vehicles (A-ATV)

Conventional ground-wheeled vehicles usually have poor trafficability, low efficiency, a large amount of energy consumption and possible failure when driving on soft terrain. To solve this problem, this paper presents a new design of transformable wheels for use in an amphibious all-terrain vehicle. The wheel has two extreme working statuses: unfolded walking-wheel and folded rigid wheel. Furthermore, the kinematic characteristics of the transformable wheel were studied using a kinematic method. When the wheel is unfolded at walking-wheel status, the displacement, velocity and acceleration of the wheel with different slip rates were analyzed. The stress condition is studied by using a classic soil mechanics method when the transformable wheel is driven on soft terrain. The relationship among wheel traction, wheel parameters and soil deformation under the stress were obtained. The results show that both the wheel traction and trafficability can be improved by using the proposed transformable wheel. Finally, a finite element model is established based on the vehicle terramechanics, and the interaction result between the transformable wheel and elastic–plastic soil is simulated when the transformable wheel is driven at different unfold angles. The simulation results are consistent with the theoretical analysis, which verifies the applicability and effectiveness of the transformable wheel developed in this paper.     

Parametric analysis of lugged wheel performance for a lunar microrover by means of DEM

The purpose of this study was to develop a numerical tool to simulate the performance of lugged wheels designed for a lunar microrover. The performance was analyzed using a Discrete Element Method (DEM) whose accuracy was validated for interactions between lugged wheels and soil. DEM analysis indicated that, on flat horizontal lunar surfaces, wheels with 18 10-mm-high lugs would provide less net traction than would wheels with 36 5-mm-high lugs.     

Discrete element method analysis of single wheel performance for a small lunar rover on sloped terrain

The purpose of this study is to analyze the performance of a lugged wheel for a lunar micro rover on sloped terrain by a 2D discrete element method (DEM), which was initially developed for horizontal terrain. To confirm the applicability of DEM for sloped terrain locomotion, the relationships of slope angle with slip, wheel sinkage and wheel torque obtained by DEM, were compared with experimental results measured using a slope test bed consisting of a soil bin filled with lunar regolith simulant. Among the lug parameters investigated, a lugged wheel with rim diameter of 250 mm, width of 100 mm, lug height of 10 mm, lug thickness of 5 mm, and total lug number of 18 was found, on average, to perform excellently in terms of metrics, such as slope angle for 20% slip, power number for self-propelled point, power number for 15-degree slope and power number for 20% slip. The estimation of wheel performance over sloped lunar terrain showed an increase in wheel slip, and the possibility exists that the selected lugged wheel will not be able to move up a slope steeper than 20°.     

Determination of in situ parameters of sandy soils for off-road vehicle mobility

This study focuses on the development of a methodology for the determination of some in situ parameters for off-road vehicle mobility on sandy soils. The stress field in the vicinity of and at the interface between a wedge and soil was determined by solving the stress equations using the method of characteristics. The governing equations were solved numerically by using backward finite difference method. The proposed method allows the prediction of any two of the in situ soil parameters δ, φ, and γ (respectively, the interfacial friction angle between the material of a wedge penetrometer and the soil, the internal friction angle, and the unit weight of the soil), given the value of any one of them and the results of penetration tests of two different apex angle wedges. The predictions and the measured values are in agreement.