表面扩散的Monte Carlo初探

利用ＭｏｎｔｅＣａｒｌｏ方法模拟了理想表面和分形表面上的扩散过程；通过模拟可以发现，表面扩散系数不仅与表面浓度有关，而且还与扩散的时间、表面的几何形貌等有关。在表面覆盖度比较高时，表面扩散系数有一极大值。与理想表面相比，分形表面会使扩散系数减小。     

超疏水表面研究进展

综述了超疏水表面研究进展,简述了超疏水表面研究的理论基础,归纳总结了超疏水表面的制备方法及存在的问题,并介绍了功能超疏水材料研究的最新进展.指出超疏水表面因其独特的自清洁性能而成为功能材料及表面界面科学领域的研究热点之一,并就其今后的发展进行了展望.     

Kinetics and layer organization during the polymerization of coniferyl alcohol at the air-water interface

The initial stage of the polymerization of coniferyl alcohol catalyzed by a peroxydase was studied at the air-water interface. The properties of the monolayers were investigated at constant area and at constant surface pressure by surface pressure, surface potential and ellipticity measurements. On the basis of the results obtained at constant surface area, it is proposed that the formation of a 2D layer occurs up to the inflection point of the surface pressure-area isotherm, and that for larger surface pressures a 3D structure is formed during the polymerization. If the barostat is set at the inflection point (the surface pressure is constant while the surface area increases), the 2D organization of the monolayer is retained. A kinetic model describing the adsorption of the reaction products in a 2D layer is proposed. The kinetic constants were determined from the surface potential, ellipsometry, surface pressure and surface area data.     

渗透汽化膜表面化学结构设计研究

综述了近年来渗透汽化膜表面结构设计调控的研究进展。膜表面结构的设计与优化是提高其分离性能的重要方法。然而高分子表面具有环境响应性,这往往导致高分子材料在使用环境中失去在表面设计时所期待的性能。因此,高分子膜表面的环境响应性是在对膜表面进行设计和调控过程中必须考虑的因素。本文介绍了渗透汽化膜表面结构设计的方法,重点阐述了高分子膜表面环境响应特性对膜表面性质以及渗透汽化性能的影响。指出了利用高分子膜的表面重构行为可以对其表面结构进行优化,从而有效地提高膜的分离选择性。     

Electrophoresis of a spherical dispersion of polyelectrolytes in a salt-free solution

The electrophoretic behavior of a spherical dispersion of polyelectrolytes of arbitrary concentration is analyzed theoretically under a salt-free condition, that is, the liquid phase contains only counterions which come from the dissociation of the functional groups of polyelectrolytes. We show that, in general, the surface potential of a polyelectrolyte increases nonlinearly with its surface charge. A linear relation exists between them, however, when the latter is sufficiently small; and the more dilute the concentration of polyelectrolytes, the broader the range in which they are linearly correlated. If the amount of surface charge is sufficiently large, counterion condensation occurs, and the rate of increase of surface potential as the amount of surface charge increases declined. Also, it leads to an inverse in the perturbed potential near the surface of a polyelectrolyte, and its mobility decreases accordingly. For a fixed amount of surface charge, the lower the concentration of polyelectrolytes and/or the lower the valence of counterions, the higher the surface potential. The qualitative behavior of the mobility of a polyelectrolyte as the amount of its surface charge varies is similar to that of its surface charge.     

Remarks on the shear viscosity of surfaces stabilised with soluble surfactants

A survey is made of previously reported values of the surface shear viscosity of sodium dodecyl sulphate solution which reveals inconsistencies. The origin of these inconsistencies is thought to be due to the fact that, because SDS is a soluble surfactant, the surface deformation rate is governed by a three-dimensional sublayer adjacent to the surface and is therefore inherently experiment-dependent. Because of this, only an apparent surface shear viscosity that is specific to a particular experiment can be measured. However, for an insoluble surfactant, an intrinsic two-dimensional surface viscosity can be clearly defined. Some methods of measuring an apparent surface shear viscosity assume that the surface shear viscosity is the only surface property that determines the drainage rate from foam or individual Plateau borders but there is experimental evidence to show that other surface properties may be significant.     

Monte Carlo Simulation of Polymers Confined Between Two Surfaces in the Presence of Diluent

Structure and surface properties of polymers confined between two surfaces are studied in the presence of diluent by using an off‐lattice Monte Carlo method. When the diluent–chain interaction is weak, the density of diluent beads near the surface increases sharply with increasing the diluent–surface interaction while the chain bead density near the surface decreases gradually. The total bead density near the surface increases with increasing the diluent–surface interaction until it exceeds the total bulk density. This is mainly due to a large increase in the diluent bead density near the surface. Because of the increase of diluent at the surface, chains near the surface change their conformation, i.e., long tails become abundant while short trains and loops are relatively depleted. On the other hand, when the diluent–chain interaction becomes strong, the total bead density near the surface increases slightly, but it exceeds the total bulk density only when the diluent–surface interaction is strong enough, because the diluents approaching the surface induce chain beads to move to the surface due to strong interaction between the chain and diluent.     

Laser treatment of A286 superalloy: corrosion resistance of the treated surface

Laser controlled melting of metal surface provides a local treatment with improved surface properties such as corrosion resistance. In the present study, laser surface treatment of iron base superalloy (A286) is carried out. The corrosion resistance of the laser‐treated surface is examined through potentiodynamic tests using 0.5 N NaCl solution. The microstructural and morphological changes in the laser‐treated layer are investigated incorporating scanning electron microscopy (SEM), X‐ray diffraction (XRD) and energy dispersive spectroscopy. The residual stress formed at the laser‐treated surface is measured using the XRD technique. It is found that laser treatment enhances corrosion resistance of A286 superalloy surface, which is attributed to the formation of fine grains and dense layer at the treated surface. Although locally scattered few corrosion induced microcracks are observed at the treated surface, they are not extended to form large cracks or crack network at the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

High surface area of porous silicon drives desorption of intact molecules

The surface structure of porous silicon used in desorption/ionization on porous silicon (DIOS) mass analysis is known to play a primary role in the desorption/ionization (D/I) process. In this study, mass spectrometry and scanning electron microscopy (SEM) are used to examine the correlation between intact ion generation with surface ablation and surface morphology. The DIOS process is found to be highly laser energy dependent and correlates directly with the appearance of surface ions (Si(n)(+) and OSiH(+)). A threshold laser energy for DIOS is observed (10 mJ/cm(2)), which supports that DIOS is driven by surface restructuring and is not a strictly thermal process. In addition, three DIOS regimes are observed that correspond to surface restructuring and melting. These results suggest that higher surface area silicon substrates may enhance DIOS performance. A recent example that fits into this mechanism is the surface of silicon nanowires, which has a high surface energy and concomitantly requires lower laser energy for analyte desorption.     

Modeling hydrophobic solvation of nonspherical systems: Comparison of use of molecular surface area with accessible surface area

It is shown that the molecular surface and the accessible surface lead to exactly the same results when calculating solvation free energies and transfer free energies, from methods using the surface tension as a parameter if the exact geometric curvature is used with the accessible surface. However, the use of the exact curvature is not necessarily the best approach chemically. Other modifications, including an approximate curvature improves the approach. Such modifications are difficult to include in methods in which the molecular surface rather than the accessible surface is used to calculate solvent effects. A modification of a Gaussian curvature term is necessary if dissociation is to be accounted for properly. The inclusion of a Gaussian curvature term, in addition to the usual mean curvature term, reconciles the difference in magnitude of the microscopic and macroscopic surface tension in the case of the accessible surface area. © 1997 by John Wiley & Sons, Inc.     

Effect of SDBS solution on the surface potential properties of the Zhaozhuang coal

It is of great significance to study the effect of surfactants on the coal surface potential for effective dust suppression in mining faces. The effect of different concentrations of sodium dodecyl benzene sulfonate (SDBS) solution on the surface potential of the Zhaozhuang coal was measured by atomic force microscopy (AFM). The experimental results show that the SDBS solution has significant influence on the surface potential of the Zhaozhuang coal. The electrical characteristics of the coal surface at the nanometer scale are different from those of macroscopic or the mesoscopic level. The surface potential of coal is basically a normal distribution, showing certain electrical characteristics. The mean value of the surface potential of the Zhaozhuang coal is increased with the increase in concentration of the SDBS solution; when the concentration of the SDBS solution is 0.3%, the mean value of surface potential is 5.59 mv, which is about two times of the mean value of the surface potential without SDBS solution added. With the increase of the concentration of the SDBS solution, the maximum value of the surface potential of the Zhaozhuang coal increases, and the minimum value decreases. It shows that the SDBS solution has a significant effect on the potential distribution law and the magnitude of the coal surface. Subsequently, on the basis of the constructed Zhaozhuang coal macromolecule model, xtb and Multiwfn simulation software were used to calculate the molecular surface electrostatic potential value and electron density value of the Zhaozhuang coal molecules after adding water molecules. The variation law for the electrostatic potential surface of the molecule was obtained after adding numbers of water molecules to the surface of the coal molecule. The simulation results show that the area proportion of absolute molecular surface electrostatic potential greater than 10 kcal/mol is increased with the growth in the number of water molecules, while the area proportion of absolute molecular surface electrostatic potential less than 10 kcal/mol is decreased. Because of the free state O─H bond polarity of water molecules, the charges on the molecular surface are rearranged in order to change the electron density on the surface of coal molecules, which affects the overall electrostatic potential of the configuration.     

水在石墨(0001)面簇模型桥位上吸附的量子化学研究

用从头计算方法对水在石墨(0001)面桥位上的吸附进行了研究.用C₆H₈原子簇模拟石墨表面,在6-31G^*水平上计算了水在不同方向和位置上的吸附能量.研究表明:水在石墨面上的吸附很弱,属于物理吸附;在中性或带负电荷的石墨表面,当水分子中的氢原子靠近石墨面时,体系存在能量最小值,而在带正电荷的表面,当氧原子靠近石墨面时存在稳定的吸附点;不论表面带正电荷还是带负电荷,均对水分子的吸附起增强作用.     

二氧化钛(TiO2)表面能的理论研究

用密度泛函理论和虚拟原子轨道方法对二氧化钛-金红石(TiO2)(110)表面的表面能进行了理论计算. 结果表明, 二氧化钛的表面能与表面缺陷的百分率相关. 完整的表面具有最低的表面能, 表面能随着表面缺陷百分率的增大而升高, 这与自然环境下二氧化钛-金红石(TiO2)具有规整的(110)表面一致. 在光催化实验中利用二氧化钛表面的缺陷作催化剂需要考虑到表面的稳定性. 另一方面, 在完整的表面五配位Ti4+上填加氧原子与表面作用时, 表面能起初变化很小, 直到50%的五配位Ti4+被填充后表面能才开始升高.     

Effect of temperature and pressure on surface tension of polystyrene in supercritical carbon dioxide

The surface tension of polymers in a supercritical fluid is one of the most important physicochemical parameters in many engineering processes, such as microcellular foaming where the surface tension between a polymer melt and a fluid is a principal factor in determining cell nucleation and growth. This paper presents experimental results of the surface tension of polystyrene in supercritical carbon dioxide, together with theoretical calculations for a corresponding system. The surface tension is determined by Axisymmetric Drop Shape Analysis-Profile (ADSA-P), where a high pressure and temperature cell is designed and constructed to facilitate the formation of a pendent drop of polystyrene melt. Self-consistent field theory (SCFT) calculations are applied to simulate the surface tension of a corresponding system, and good qualitative agreement with experiment is obtained. The physical mechanisms for three main experimental trends are explained by using SCFT, and none of the explanations quantitatively depend on the configurational entropy of the polymer constituents. These calculations therefore rationalize the use of simple liquid models for the quantitative prediction of surface tensions of polymers. As pressure and temperature increase, the surface tension of polystyrene decreases. A linear relationship is found between surface tension and temperature, and between surface tension and pressure; the slope of surface tension change with temperature is dependent on pressure.     

Activity Coefficients in the Surface Phase of Liquid Mixtures

A novel equation for evaluating surface activity coefficients is obtained from a recent thermodynamic formalism describing the surface phase of liquid mixtures. The input quantities are the surface tension, bulk activity coefficients and pure constituent thermophysical properties. It is demonstrated thermodynamically that the order of magnitude of each component surface and bulk activity coefficients must be the same. This order is intrinsically associated with the sign of excess surface tension. Reliable activity coefficients of ethanol and water in the surface phase of their mixtures are computed and reported for the first time, by using literature data for the required input quantities. It is shown that the so‐called transferring method for estimating surface activity coefficients is severely flawed, because it leads to contradictory values of predicted excess surface tensions depending on which component this prediction is based.     

Numerical computation of surface areas of molecules

For a cubical tesselation of a finite region of space which contains an irregularly shaped surface, a fairly accurate estimate of the surface area is 2/3N a ², whereN is the total number of cubes cut by the surface and a is the length of the edges of the cubes. An estimate of slightly improved accuracy can be obtained by using different increments to the surface area, depending on the number of edges of the corresponding cube cut by the surface and the number of vertices on either side of the surface.     

Thermodynamic quantities of surface formation of aqueous electrolyte solutions X. Aqueous solution of 2:1 valence-type salts

The behaviors of a series of calcium halides and of alkali earth metal chlorides in the air/water surface region were studied in comparison with those of alkali metal halides by measuring the surface tension increments of solutions. The effect of salts with divalent cations on the surface tension increments is more pronounced than that of uni-univalent salts, but there are some similarities between these two types. It seems that the anions cause a marked effect on surface tension which is proportional to the magnitude of hydration in the bulk water. We also observed a decrease in the entropy change of surface formation with increasing concentration. The importance of an electrical double layer at the surface is discussed in relation to these surface tension increments.     

Surface Tension of Ternary Solutions

A theory of the surface tension of ternary solutions is presented. It assumes different molecular sizes of individual components of the solution and takes into account intermolecular interactions both at the surface and in the bulk. The influence of these interactions on the surface tension behavior including the surface buffering effect and the surface phase transition is discussed. Copyright 1999 Academic Press.     

Reduction of polymer surface tension by crystallized polymer nanoparticles

Self-consistent field theory is applied to investigate the effects of crystallized polymer nanoparticles on polymer surface tension. It is predicted that the nanoparticles locate preferentially at the polymer surface and significantly reduce the surface tension, in agreement with experiment. In addition to the reduction of surface tension, the width of the polymer surface is found to narrow. The reduced width and surface tension are due to the smaller spatial extent of the nanoparticles compared to the polymer. This allows the interface to become less diffuse and so reduces the energies of interaction at the surface, which lowers the surface tension. The solubility of the surrounding solvent phase into the polymer melt is mostly unchanged, a very slight decrease being detectable. The solubility is constant because away from the interface, the system is homogeneous and the replacement of polymer with nanoparticles has little effect.     

Electrochemical Fabrication of Nanostructured Surfaces for Enhanced Response

The objective of this work is to explore approaches to enhance electrochemical signals through sequential deposition and capping of gold particles. Gold nanoparticles are electrodeposited from KAuCl₄ solution under potentiostatic conditions on glassy carbon substrates. The number density of the nanoparticles is increased by multiple deposition steps. To prevent secondary nucleation processes, the nanoparticles are isolated after each potentiostatic deposition step by self‐assembled monolayers (SAMs) of decanethiol or mercaptoethanol. The increasing number of particles during five deposition/protection rounds is monitored by assembling electroactive SAMs using a ferrocene‐labeled alkanethiol. A precise estimation of the surface area of the gold nanoparticles by formation of an oxide layer on gold is difficult due to oxidation of the glassy carbon surface. As an alternative approach, the charge flow of the electroactive SAM is used for surface measurement of the gold surface area. A sixfold increase in the redox signal in comparison to a bulk gold surface is observed, and this increase in redox signal is particularly notable given that the surface area of the deposited nanoparticles is only a fraction of the bulk gold surface. After five rounds of deposition there is a gold loading of 1.94 μg cm^?2 of the deposited nanoparticles as compared to 23.68 μg cm^?2 for the bulk gold surface. Remarkably, however, the surface coverage of the ferrocene alkanethiol on the bulk material is only 10 % of that achieved on the deposited nanoparticles. This enhancement in signal of the nanoparticle‐modified surface in comparison to bulk gold is thus demonstrated not to be attributable to an increase in surface area, but rather to the inherent properties of the surface atoms of the nanoparticles, which are more reactive than the surface atoms of the bulk material.