Calorimetry at surfaces using high-resolution core-level photoemission

We have developed a method to measure simultaneously the internal energy of bulk and the first layer atoms of a crystal. The internal energy of bulk and the surface atoms of lithium (110) have been evaluated from 22 K up to above the melting transition, applying the Debye model to the thermal broadening of the respective 1s photoemission lines. Our measurements clearly reveal two phase changes: the known liquid to solid transition and the surface melting, occurring 50 K below the bulk melting point.     

Clusters on surfaces: high-resolution spectroscopy at low temperatures

With controlled growth in nanometer-sized pits we produced silver and gold clusters on a graphite surface. We give a summary of the preparation method and discuss the scanning tunneling imaging and the crystalline orientation of the clusters. The electronic structure of the clusters was studied by an in-situ combination of ultraviolet photoelectron spectroscopy (UPS) and scanning tunneling spectroscopy (STS). For both techniques we obtained an energy resolution in the range of 10 meV employing low sample temperatures. Dynamic final-state effects together with averaging over a cluster-size distribution result in characteristic spectral shapes in UPS, which can be understood referring to STS data taken on individual clusters. Finally, directions for future experiments are pointed out. Received: 13 April 2000 / Accepted: 6 November 2000 / Published online: 9 February 2001     

Relationship between sliding acceleration of water droplets and dynamic contact angles on hydrophobic surfaces

This study measured sliding acceleration of water droplets on hydrophobic solid surfaces and used expanding and contracting method to compare that value with dynamic contact angles. Sliding action of the droplet was classified into three motion categories: constant accelerated motion, constant velocity and stasis. Differences exist in the dependencies of contact radius and the injection-suction rate in dynamic contact angle hysteresis according to these categories. This method is an effective indicator of water droplets’ sliding acceleration.     

Rate-dependent slip of Newtonian liquid at smooth surfaces

Newtonian fluids were placed between molecularly smooth surfaces whose spacing was vibrated at spacings where the fluid responded as a continuum. Hydrodynamic forces agreed with predictions from the no-slip boundary condition only provided that flow rate (peak velocity normalized by spacing) was low, but implied partial slip when it exceeded a critical level, different in different systems, correlated with contact angle (surface wettability). With increasing flow rate and partially wetted surfaces, hydrodynamic forces became up to 2-4 orders of magnitude less than expected by assuming the no-slip boundary condition that is commonly stated in textbooks.     

Aeroacoustics of duct junction flows merging at different angles

This paper reports an exploratory study of the aeroacoustics of a merging flow at a duct junction with the same width in all branches and different merging angles. The focus is put on the acoustic generation due to the flow unsteadiness. The study is carried out by the direct aeroacoustic simulation (DAS) approach, which solves the unsteady compressible Navier–Stokes equations and the perfect gas equation of state simultaneously using the conservation element and solution element (CE/SE) method. The Mach number based on the maximum inlet velocity of side branch is 0.1 and the Reynolds number of the flow based on duct width and this velocity is 2.3×10⁵. The numerical simulations are performed in two dimensions and the aeroacoustics at different merging angles (30°, 45°, 60° and 90°) are studied. Both the levels of unsteady interactions of merging flow structures and the efficiency of the acoustic generation are observed to increase with the merging angles, where the increase in acoustic efficiency can be up to three orders of magnitude. The major acoustic source is found to be the fluctuating wall pressure induced by the flow unsteadiness in the downstream branch. A scaling law between the wall fluctuating force and the acoustic efficiency is also derived.     

Regular waves on vertical falling rivulets at different wetting contact angles

Results of experimental investigation of regular wave conditions for straight rivulets falling down a vertical plane are presented. Field measurements of the local thickness of rivulets were carried out with the help of laser-induced fluorescence. Data on the wave structure of rivulets is shown in a wide range of frequencies of regular waves for different Reynolds numbers of the flow and contact wetting angles. It was observed for all studied wave conditions that transverse width of rivulets and wetting angles are insensitive to the phase of propagating waves. Moreover, it was found that the wave structure of rivulets differs significantly for the cases of low and high values of the contact angle.     

Determination of the tilt angles at surfaces of substrates in liquid crystal cells

A method to determine tilt angles of nematic liquid crystal directors at the surfaces of parallel substrates is described for homeotropic and homogeneous orientation as well as for TN-cells. Graphs which can be used to evaluate the tilt angles for a cyano-biphenyl mixture from simple transmission measurements are given. The direction of extreme optical path difference between plane polarized modes tilts much more than the tilt angle of the molecules.     

变温条件下受激布里渊散射增益系数的实验测量

从理论及实验上分析了介质温度对受激布里渊散射(stimulated Brillouin scattering, SBS)阈值及增益系数的影响.在理论分析的基础上, 提出了一种通过测量SBS阈值来决定介质SBS增益系数的新方法. 实验及测量结果表明, SBS增益系数会随着介质温度的增加而呈现指数上升的趋势. 关键词： 受激布里渊散射 阈值 增益系数     

Dipole-dependent slip of Newtonian liquids at smooth solid hydrophobic surfaces

We present atomic force microscopy observations of the "effective" slippage of various nonpolar and polar liquids on alkylsilane coated glass surfaces. For small contact angle nonpolar liquids, the slip length decreases as one approaches a wetting transition. However, for large contact angle polar liquids it is found that the slip length is primarily influenced by the dipole moment, rather than the wettability of the liquid for the surface, where the slip length decreases with increasing dipole moment.     

Spin-wave eigenmodes of a saturated magnetic square at different precession angles

Using low-loss dielectric magnetic films in combination with space-resolved Brillouin light scattering spectroscopy we have studied nonlinear modification of eigenmode spatial distributions in saturated magnetic squares. We have found that, as the angle of magnetization precession increases, the eigenmode spatial distributions experience significant qualitative changes due to a nonlinear coupling between forming them standing spin waves. We show that the found nonlinear eigenmodes cannot be described by means of the linear theoretical approach even qualitatively.     

Measurement of the water jet velocity at the outlet of nozzles with different profiles

Water jets accelerated by differently configured convergent nozzles of diameters ranging from 4.5 to 5.0 mm are studied. The excess pressure at the nozzle inlet varies from 5 × 10³ to 3.5 × 10⁶ Pa. Velocity measurements are carried out with a spring dynamometer and a free-running Pelton microturbine. The jet strength at the outlet of the nozzle is found to increase by a factor of 4.0–4.5 compared with the water flow strength at the inlet, which depends on the excess pressure and volume flow at the inlet. Reasons for such an effect and a possible source of the additional energy are considered. The 2D Bernoulli equation used instead of the 1D equation routinely applied in nozzle analysis leads to a negative value of the excess pressure at the nozzle exit section and in the jet. Gas evolution and cavitation enhance this effect because of a decrease in the jet density. As a result, the jet is accelerated not only by the inlet pressure but also due to the fact that the potential energy of the flowing medium decreases because of a decrease in its absolute pressure down to the technical vacuum level. The contraction of the jet by the atmospheric air and the establishment of the equilibrium (in air) pressure in the water jet eventually raise its kinetic energy through the internal energy of the air.     

不同光线入射角度下超声速湍流边界层气动光学效应的实验研究

利用基于纳米粒子的平面激光散射技术获取超声速(Ma=3.0)湍流边界层的密度分布,采用光线追迹方法计算其对应的光程差分布,并结合边界层气动光学相似律验证实验结果的可靠性.着重研究了光线入射角度对超声速湍流边界层气动光学效应的影响,并对其内在机理进行了分析.研究表明,气动光学效应对光线入射角度的依赖性源于光线在流场中的传输路径,传输路径的不同导致了光线在流场中的传输距离以及对应密度脉动互相关结果的差异.光线倾斜入射导致其在流场中传输距离增长,进而气动光学效应出现恶化.光线入射方向与壁面垂直方向之间的夹角越大,气动光学效应越显著,而且不同时刻的差异性增加,气动光学效应校正的难度增加.超声速湍流边界层中大量具有特定方向的涡结构导致了湍流边界层气动光学效应的各向异性.当光线倾斜向下游入射时,光线传播方向与流场中的涡结构具有较好的一致性,体现为此方向上密度脉动互相关系数较大,故气动光学效应比较严重.而当光线倾斜向上游入射时,相关系数较小,故气动光学效应较弱.     

Effects of proton irradiation at different incident angles on InAlAs/InGaAs InP-based HEMTs

InP-based high electron mobility transistors(HEMTs) will be affected by protons from different directions in space radiation applications. The proton irradiation effects on InAlAs/InGaAs hetero-junction structures of InP-based HEMTs are studied at incident angles ranging from 0 to 89.9° by SRIM software. With the increase of proton incident angle, the change trend of induced vacancy defects in the InAlAs/InGaAs hetero-junction region is consistent with the vacancy energy loss trend of incident protons. Namely, they both have shown an initial increase, followed by a decrease after incident angle has reached 30°. Besides, the average range and ultimate stopping positions of incident protons shift gradually from buffer layer to hetero-junction region, and then go up to gate metal. Finally, the electrical characteristics of InP-based HEMTs are investigated after proton irradiation at different incident angles by Sentaurus-TCAD. The induced vacancy defects are considered self-consistently through solving Poisson's and current continuity equations. Consequently, the extrinsic transconductance, pinch-off voltage and channel current demonstrate the most serious degradation at the incident angle of 30?, which can be accounted for the most severe carrier sheet density reduction under this condition.     

Correlation of light beams scattered at different angles by a ground glass

A quantitative study of the contrast of Young's fringes obtained with a fully scattering element by double exposure technique as a function of the inclination of the incident beam and the effect of varying the scatterer- photographic plate distance upon the γ - θ curve have been presented.     

Increased temperature bandwidth of second harmonic generator using two KTiOPO4 crystals cut at different angles

We report a second harmonic generator (SHG), whose temperature full-width of half-maximum (FWHM) bandwidth is significantly increased by replacing a single long type-II phase-matched KTiOPO₄ (KTP) crystal with two shorter crystals, which are cut at slightly different phase-matching angles. The total length of the two crystals is the same as that of the longer ones. The experimental results show that the measured temperature FWHM bandwidth of the SHG is significantly increased from 11.8 °C in the single 7 × 7 × 10 mm³ KTP crystal to 60.2 °C when the single KTP is replaced with two of 7 × 7 × 5 mm³ KTP crystals whose phase-matching angle are 1.0° apart. Such a SHG allows stable output when it is operated in the environment of very rough temperature condition.     

Measurement of high frequency ultrasound in liquids using high-resolution Bragg reflection technique

A new light scattering technique has been established for simultaneous measurement of ultrasonic velocity and absorption in liquids over a frequency range from 100 to 1000 MHz. The technique is applied to studies of vibrational relaxation in the uhf range, and the velocity-dispersion and absorption curves in several organic liquids are presented.     

Measurement of soil water using Compton scattering

Compton scattering method has been used as a possible tool in the study of the properties of soil for agricultural purposes. In this study, the soil water is determined by using Compton scattering method. The soil sample was collected from Erzurum and a 2 × 2 in. NaI (Tl) scintillation detector measured Compton scattered radiation from the soil sample. The radioactive source used in the experiment was a ¹³³Ba. The soil samples were irrigated by adding known quantities of water and a standard curve was constructed with the amount of water added versus Compton scattering intensity. It was observed that Compton scattering method in measurement of the soil water has advantages such as practical, inexpensive, non‐destructive and fast analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

Atom dynamics of micro-clusters on atomically smooth surfaces

The partial phonon densities for different displacements of mono-atomic micro-clusters on atomically smooth surfaces of FCC crystals as well as for pyramidal micro-clusters on the surface of a BCC crystal are calculated by the Jacobi matrix method. The stability of these clusters is analyzed and the temperature dependencies of root-mean displacements are obtained for atoms in different positions of such structures.