Distinct electronic effects on reductive eliminations of symmetrical and unsymmetrical bis-aryl platinum complexes

Symmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(2) (R = NMe(2), OMe, CH(3), H, Cl, CF(3)) and electronically unsymmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(C(6)H(4)-4-X) (R = CH(3), X = NMe(2), OMe, H, Cl, F, CF(3); R = OMe, X = NMe(2), H, Cl, F, CF(3); R = CF(3), X = H, Cl, NMe(2); and R = NMe(2), X = H, Cl) were prepared, and the rates of reductive elimination of these complexes in the presence of excess PPh(3) are reported. The platinum complexes reductively eliminated biaryl compounds in quantitative yields with first-order rate constants that were independent of the concentration of PPh(3). Plots of Log(k(obs)/k(obs(H))) vs Hammett substituent constants (sigma) of the para substituents R and X showed that the rates of reductive elimination reactions depended on two different electronic properties. The reductive elimination from symmetrical bis-aryl platinum complexes occurred faster from complexes with more electron-donating para substituents R. However, reductive elimination from a series of electronically unsymmetrical bis-aryl complexes was not faster from complexes with the more electron-donating substituents. Instead, reductive elimination was faster from complexes with a larger difference in the electronic properties of the substituents on the two platinum-bound aryl groups. The two electronic effects can complement or cancel each other. Thus, this combination of electronic effects gives rise to complex, but now more interpretable, free energy relationships for reductive elimination.     

Substituent cross-interaction effects on the electronic character of the C=N bridging group in substituted benzylidene anilines--models for molecular cores of mesogenic compounds. A 13C NMR study and comparison with theoretical results

13C NMR chemical shifts delta(C)(C=N) were measured in CDCl3 for a wide set of mesogenic molecule model compounds, viz. the substituted benzylidene anilines p-X-C6H4CH=NC6H4-p-Y (X = NO2, CN, CF3, F, Cl, H, Me, MeO, or NMe2; Y = NO2, CN, F, Cl, H, Me, MeO, or NMe2). The substituent dependence of delta(C)(C=N) was used as a tool to study electronic substituent effects on the azomethine unit. The benzylidene substituents X have a reverse effect on delta(C)(C=N): electron-withdrawing substituents cause shielding, while electron-donating ones behave oppositely, the inductive effects clearly predominating over the resonance effects. In contrast, the aniline substituents Y exert normal effects: electron-withdrawing substituents cause deshielding, while electron-donating ones cause shielding of the C=N carbon, the strengths of the inductive and resonance effects being closely similar. Additionally, the presence of a specific cross-interaction between X and Y could be verified. The electronic effects of the neighboring aromatic ring substituents systematically modify the sensitivity of the C=N group to the electronic effects of the benzylidene or aniline ring substituents. Electron-withdrawing substituents on the aniline ring decrease the sensitivity of delta(C)(C=N) to the substitution on the benzylidine ring, while electron-donating substituents have the opposite effect. In contrast, electron-withdrawing substituents on the benzylidene ring increase the sensitivity of delta(C)(C=N) to the substituent on the aniline ring, while electron-donating substituents act in the opposite way. These results can be rationalized in terms of the substituent-sensitive balance of the electron delocalization (mesomeric effects). The present NMR characteristics are discussed as regards the computational literature data. Valuable information has been obtained on the effects of the substituents on the molecular core of the mesogenic model compounds.     

The effects of the substitution on the imidazole ligand on the photochemical properties of fac-[Mn(CO)3(phen)(Imidazole)](SO3CF3) complexes

Photochemical and photophysical data are reported for a series of fac-[Mn(CO)(3)(phen)(Im-R)](SO(3)CF(3)) complexes, where phen is 1,10-phenanthroline and Im is imidazole. Intraligand and metal-to-ligand charge transfer (MLCT) transitions are observed in the electronic absorption spectra of these complexes and are sensitive to the nature of the ligand substituent. At room temperature the emission spectra show a clear progression from broad structureless MLCT to highly structured pi-pi* emission on going from R = -H, -CH(3), -C(6)H(5), to -Metro, where Metro is 2-methyl-5-nitroimidazole. Even at low temperatures the latter complexes show only the pi-pi* emission. The trend in the photophysical properties found in the emission spectra parallels the changes in the photochemical properties with the electron-donating or electron-withdrawing power of the substituent on the imidazole ligand. Although MLCT irradiation of the complexes with R = -H, -CH(3) leads to the mer-[Mn(CO)(3)(phen)(Im-R)](+) isomers, the complexes with the imidazole ligand substituted by -C(6)H(5) or -Metro release the Im-R ligand and produce the stereoretentive fac-[Mn(CO)(3)(phen)(S)](+) complexes. The stereochemical fate and mechanistic implications of the photolysis reactions are discussed in terms of the nature of ligand substitution.     

Efficient modulation of hydrogen-bonding interactions by remote substituents

[structure: see text] A series of tetralactam macrocycles having different substituents were prepared, and their binding affinities for an adipamide guest were investigated in CDCl3 by 1H NMR titrations. The association constants strongly depend on the substituents, varying up to DeltaDeltaG = 3.4 kcal/mol; electron-donating substituents (OMe, NMe2) decrease the binding affinity, while electron-withdrawing groups (Cl, NO2) increase it. These large substituent effects have been rationalized by secondary repulsions and partial perturbations of intramolecular hydrogen bonds.     

Control of the mutual arrangement of cyclometalated ligands in cationic iridium(III) complexes. Synthesis, spectroscopy, and electroluminescence of the different isomers

Synthetic control of the mutual arrangement of the cyclometalated ligands (C^N) in Ir(III) dimers, [Ir(C^N)(2)Cl](2), and cationic bis-cyclometalated Ir(III) complexes, [Ir(C^N)(2)(L^L)](+) (L^L = neutral ligand), is described for the first time. Using 1-benzyl-4-(2,4-difluorophenyl)-1H-1,2,3-triazole (HdfptrBz) as a cyclometalating ligand, two different Ir(III) dimers, [Ir(dfptrBz)(2)Cl](2), are synthesized depending on the reaction conditions. At 80 °C, the dimer with an unusual mutual cis-C,C and cis-N,N configuration of the C^N ligands is isolated. In contrast, at higher temperature (140 °C), the geometrical isomer with the common cis-C,C and trans-N,N arrangement of the C^N ligand is obtained. In both cases, an asymmetric bridge, formed by a chloro ligand and two adjacent nitrogens of the triazole ring of one of the cyclometalated ligands, is observed. The dimers are cleaved in coordinating solvents to give the solvento complexes [Ir(dfptrBz)(2)Cl(S)] (S = DMSO or acetonitrile), which maintain the C^N arrangement of the parent dimers. Controlling the C^N ligand arrangement in the dimers allows for the preparation of the first example of geometrical isomers of a cationic bis-cyclometalated Ir(III) complex. Thus, N,N-trans-[Ir(dfptrBz)(2)(dmbpy)](+) (dmbpy = 4,4'-dimethyl-2,2'-bipyridine), with cis-C,C and trans-N,N arrangement of the C^N ligands, as well as N,N-cis-[Ir(dfptrBz)(2)(dmbpy)](+), with cis-C,C and cis-N,N C^N ligand orientation, are synthesized and characterized. Interestingly, both isomers show significantly different photophysical and electroluminescent properties, depending on the mutual arrangement of the C^N ligands. Furthermore, quantum chemical calculations give insight into the observed photophysical experimental data.     

Electronic optimization of heteroleptic Ru(II) bipyridine complexes by remote substituents: synthesis, characterization, and application to dye-sensitized solar cells

We prepared a series of new heteroleptic ruthenium(II) complexes, Ru(NCS)(2)LL' (3a-3e), where L is 4,4'-di(hydroxycarbonyl)-2,2'-bipyridine and L' is 4,4'-di(p-X-phenyl)-2,2'-pyridine (X = CN (a), F (b), H (c), OMe (d), and NMe(2) (e)), in an attempt to explore the structure-activity relationships in their photophysical and electrochemical behavior and in their performance in dye-sensitized solar cells (DSSCs). When substituent X is changed from electron-donating NMe(2) to electron-withdrawing CN, the absorption and emission maxima reveal systematic bathochromic shifts. The redox potentials of these dyes are also significantly influenced by X. The electronic properties of the dyes were theoretically analyzed using density functional theory calculations; the results show good correlations with the experimental results. The solar-cell performance of DSSCs based on dye-grafted nanocrystalline TiO(2) using 3a-3e and standard N3 (bis[(4,4'-carboxy-2,2'-bipyridine)(thiocyanato)]ruthenium(II)) were compared, revealing substantial dependences on the dye structures, particularly on the remote substituent X. The 3d-based device showed the best performance: η = 8.30%, J(SC) = 16.0 mA·cm(-2), V(OC) = 717 mV, and ff = 0.72. These values are better than N3-based device.     

Front Cover: Design,Synthesis and Photophysical Studies of Luminescent Rhodium(III) Complexes in Near-Infrared Region (Eur. J. Inorg. Chem. 11/2023)

A series of near-infrared (NIR)-emitting cyclometalated rhodium(III) complexes have been designed, synthesized and characterized. The NIR luminescence has been realized by rational design of strong σ-donor cyclometalating (C^N) ligand with extended π-conjugation structure for decreasing the energy level of intraligand (IL) state. In addition, the investigation of substituents on the benzo[g]quinoxaline moiety as the carbon-donor demonstrated that the luminescence can be further shifted to the red by the introduction of electron-donating thienyl groups. The luminescence maxima of these complexes are ranging from 763 nm to 792 nm with the luminescence quantum yield (Φ_lum) of 0.41 %–0.66 % in dichloromethane solution. This work demonstrates the first example of NIR-phosphorescent rhodium(III) complexes and provides an alternative for diversifying the development of NIR materials.     

Synthesis, spectroscopic characterization, redox properties and catalytic activity of some ruthenium(II) complexes containing aromatic aldehyde and triphenylphosphine or triphenylarsine

A series of new mixed ligand penta-coordinated square pyramidal ruthenium(II) complexes containing benzaldehyde or its substituents and triphenylphosphine or triphenylarsine have been synthesized and characterized. In the electronic spectra, three well-defined peaks in the visible region were observed and assigned to d-d transitions in D(4h) and low spin axially distortion from O(h) symmetry. The spectrochemical parameters of the complexes were calculated and placed the ligands in the middle of the spectrochemical series. The redox properties and stability of the complexes toward oxidation were related to the electron-withdrawing or releasing ability of the substituent in the phenyl ring of the benzaldehyde. The electron-withdrawing substituents stabilized Ru(2+) complexes, while electron-donating groups favored oxidation to Ru(3+). The mechanism and kinetics of the catalytic oxidation of benzyl alcohol by the complex [RuCl(2)(Pph(3))(C(6)H(5)CHO)(2)] in the presence of N-methylmorpholine-N-oxide have also been studied.     

Complete defluorination of 1,2,3,4-tetramethyl-5-(trifluoromethyl)cyclopentadiene by titanium tetrakis(dimethylamide)--selective formation of a cyclic hexanuclear titanium fluoroamide and 6,6-dimethylaminotetramethylfulvene

1,2,3,4-Tetramethyl-5-(trifluoromethyl)cyclopentadiene (Cp*CF3-H, 1) reacts with [Ti(NMe2)4] (2) under mild conditions to give [Ti(mu-NMe2)(NMe2)(mu-F)(F)]6 (3) in nearly quantitative yield. The molecular structure of 3 consists of a ring of six [TiF2(NMe2)2] edge-bridged octahedra. Titanium complexes containing the Cp*CF3 ligand, which was the primary intention of these investigations, were not observed. C5Me4=C(NMe2)2 (4) was isolated as a by-product. The complete defluorination of an aliphatic CF3 group occurs during the reaction. The reaction mechanism involves the primary formation of a difluorofulvene intermediate C5Me4=CF2 (5), which was monitored by NMR studies. Density functional theory calculations predict a highly charged C6 atom (+0.87) in 5, which is discussed as the driving force of the reaction.     

Stereoselective Formation of Facial Tris-Cyclometalated PtIV Complexes: Dual Phosphorescence from Heteroleptic Derivatives

A stereoselective synthetic route to homo- and heteroleptic facial tris-cyclometalated Pt^IV complexes is reported, involving the oxidative addition of 2-(2-pyridyl)- or 2-(1-isoquinolinyl)benzenediazonium salts to cis-[Pt(C^N)₂] precursors, with C^N=cyclometalated 2-(p-tolyl)pyridine (tpy), 2-phenylquinoline (pq), 2-(2-thienyl)pyridine or 1-phenylisoquinoline (piq), to produce labile diazenide intermediates that undergo photochemical or thermal elimination of N₂. The method allows the preparation of derivatives bearing cyclometalated ligands of low π–π* transition energies. The new complexes exhibit phosphorescence in fluid solution at room temperature arising from triplet ligand-centered (³LC) excited states, which, in the cases of the heteroleptic derivatives, involve the ligand with the lowest π–π* gap. The heteroleptic piq derivatives exhibit fluorescence and dual phosphorescence from different ligand-centered excited states in rigid media, demonstrating the potential of cyclometalated Pt^IV complexes as multi-emissive materials.     

The electronic influence of ring substituents and ansa bridges in zirconocene complexes as probed by infrared spectroscopic,electrochemical, and computational studies

The electronic influence of unbridged and ansa-bridged ring substituents on a zirconocene center has been studied by means of IR spectroscopic, electrochemical, and computational methods. With respect to IR spectroscopy, the average of the symmetric and asymmetric stretches (nu(CO(av))) of a large series of dicarbonyl complexes (Cp(R))(2)Zr(CO)(2) has been used as a probe of the electronic influence of a cyclopentadienyl ring substituent. For unbridged substituents (Me, Et, Pr(i), Bu(t), SiMe(3)), nu(CO(av)) on a per substituent basis correlates well with Hammett sigma(meta) parameters, thereby indicating that the influence of these substituents is via a simple inductive effect. In contrast, the reduction potentials (E degrees ) of the corresponding dichloride complexes (Cp(R))(2)ZrCl(2) do not correlate well with Hammett sigma(meta) parameters, thereby suggesting that factors other than the substituent inductive effect also influence E degrees. Ansa bridges with single-atom linkers, for example [Me(2)C] and [Me(2)Si], exert a net electron-withdrawing effect, but the effect is diminished upon increasing the length of the bridge. Indeed, with a linker comprising a three-carbon chain, the [CH(2)CH(2)CH(2)] ansa bridge becomes electron-donating. In contrast to the electron-withdrawing effect observed for a single [Me(2)Si] ansa bridge, a pair of vicinal [Me(2)Si] ansa bridges exerts an electron-donating effect relative to that from the single bridge. DFT calculations demonstrate that the electron-withdrawing effect of the [Me(2)C] and [Me(2)Si] ansa-bridges is due to stabilization of the cyclopentadienyl ligand acceptor orbital, which subsequently enhances back-donation from the metal. The calculations also indicate that the electron-donating effect of two vicinal [Me(2)Si] ansa bridges, relative to that of a single bridge, is a result of it enforcing a ligand conformation that reduces back-donation from the metal.     

Water attack umpolung aromatic systems to release hydrogen

The synthesis and structures of a series of cyclometalated iridium(III) complexes based on benzoxazole derivatives and triphenylphospine are reported. These complexes have a general formula (C^N)(2)Ir(Cl)(pph(3)) [where C^N is a monoanionic cyclometalating ligand, dfpbo = (difluorophenyl)benzoxazolato, pbo = 2-phenylbenzoxazolato, nbo = 2-(2-naphthyl)benzoxazolato, and pph(3) is a triphenylphospine ligand]. The complexes (dfpbo)(2)Ir(Cl)(pph(3)) (2a), (pbo)(2)Ir(Cl)(pph(3)) (2b), and (nbo)(2)Ir (Cl)(pph(3)) (2c) have been structurally characterized by X-ray crystallography. Complex 2a shows facile umpolung in the phenyl rings of the arylphosphine ligand and displays a catalytic propensity for water splitting.     

Oxidative addition of MeI to some cyclometalated organoplatinum(II) complexes: Kinetics and mechanism

New cyclometalated platinum(II) complexes [PtMe(C^N)L], 1, in which C^N = deprotonated 2-phenylpyridine (ppy), benzo[h]quinoline (bhq) or 2-(p-tolyl)pyridine (tpy) and L = PPh₃ or PMePh₂, were synthesized by the reaction of [PtMe(C^N)(SMe₂)] with 1 equiv of L. The reaction of complexes 1 with MeI gave the cyclometalated Pt(IV) complexes [PtMe₂I(C^N)L], 3. On the basis of kinetic studies, using Uv–visible spectroscopy, it was suggested that the latter oxidative addition reactions were proceeded by an S_N2 mechanism. The rates of the reactions at different temperatures were measured and consistent with the proposed mechanism, large negative ΔS³ values were found for each reaction. Besides, rate of reactions (in CHCl₃) involving the PPh₃ complexes [PtMe(C^N)(PPh₃)], were almost 3–5 times slower than those involving the PMePh₂ complexes [PtMe(C^N)(PMePh₂)]. This was attributed to the electronic and steric effects of PPh₃ ligand as compared with that of PMePh₂ ligand which was further confirmed using density functional theory (DFT) calculations through finding approximate structures for the described complexes.     

Substituent effect on the photophysical properties, electrochemical properties and electroluminescence performance of orange-emitting iridium complexes

A series of bis(2-phenylbenzothiozolato-N,C(2'))iridium(acetylacetonate) [(bt)(2)Ir(acac)] derivatives, 1-4, were synthesized. Different substituents (CF(3), F, CH(3), OCH(3)) were introduced in the benzothiazole ring to study the substituent effect on the photophysical, electrochemical properties and electroluminescent performance of the complexes, and finally to select high-performance phosphors for use in organic light-emitting diodes (OLEDs). All complexes 1-4 and (bt)(2)Ir(acac) are orange-emitting with tiny spectral difference, despite the variation of the substituent. However, the phosphorescent quantum yield increases with the electron-withdrawing ability of the substituent. This is in contrast to the previous observation that the substituent in the phenyl ring bonded to the metal center of (bt)(2)Ir(acac) not only affected the luminescent quantum efficiency but also greatly tuned the emission color of the complexes. Quantum chemical calculations revealed that the substituents in this position do not make a significant contribution to both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), which probably accounts for the fact that they do no strongly influence the bandgap and emission color of the complexes. Orange OLEDs were fabricated using 1-4 as doped emitters. The electron-withdrawing CF(3) and F groups favor improving the electroluminescence efficiency in comparison with that of the parent (bt)(2)Ir(acac), while electron-donating CH(3) and OCH(3) are not favorable for light emission. The complex 1 based OLED exhibited a maximum luminance efficiency of 54.1 cd A(-1) (a power efficiency of 24 lm W(-1) and an external quantum efficiency of 20%), which are among the best results ever reported for vacuum deposited orange OLEDs so far.     

Luminescent cyclometalated dialkynylgold(III) complexes of 2-phenylpyridine-type derivatives with readily tunable emission properties

A novel class of luminescent dialkynylgold(III) complexes containing various phenylpyridine and phenylisoquinoline-type bidentate ligands has been successfully synthesized and characterized. The structures of some of them have also been determined by X-ray crystallography. Electrochemical studies demonstrate the presence of a ligand-centered reduction originating from the cyclometalating C^N ligand, whereas the first oxidation wave is associated with an alkynyl ligand-centered oxidation. The electronic absorption and photoluminescence properties of the complexes have also been investigated. In dichloromethane solution at room temperature, the low-energy absorption bands are assigned as the metal-perturbed π-π* intraligand (IL) transition of the cyclometalating C^N ligand, with mixing of charge-transfer character from the aryl ring to the pyridine or isoquinoline moieties of the cyclometalating C^N ligand. The low-energy emission bands of the complexes in fluid solution at room temperature are ascribed to originate from the metal-perturbed π-π* IL transition of the cyclometalatng C^N ligand. For complex 4 that contains an electron-rich amino substituent on the alkynyl ligand, a structureless emission band, instead of one with vibronic structures as in the other complexes, was observed, which was assigned as being derived from an excited state of a [π(C≡CC(6) H(4) NH(2) )→π*(C^N)] ligand-to-ligand charge-transfer (LLCT) transition.     

Acid-induced degradation of phosphorescent dopants for OLEDs and its application to the synthesis of tris-heteroleptic iridium(III) bis-cyclometalated complexes

Investigations of blue phosphorescent organic light emitting diodes (OLEDs) based on [Ir(2-(2,4-difluorophenyl)pyridine)(2)(picolinate)] (FIrPic) have pointed to the cleavage of the picolinate as a possible reason for device instability. We reproduced the loss of picolinate and acetylacetonate ancillary ligands in solution by the addition of Br?nsted or Lewis acids. When hydrochloric acid is added to a solution of a [Ir(C^N)(2)(X^O)] complex (C^N = 2-phenylpyridine (ppy) or 2-(2,4-difluorophenyl)pyridine (diFppy) and X^O = picolinate (pic) or acetylacetonate (acac)), the cleavage of the ancillary ligand results in the direct formation of the chloro-bridged iridium(III) dimer [{Ir(C^N)(2)(μ-Cl)}(2)]. When triflic acid or boron trifluoride are used, a source of chloride (here tetrabutylammonium chloride) is added to obtain the same chloro-bridged iridium(III) dimer. Then, we advantageously used this degradation reaction for the efficient synthesis of tris-heteroleptic cyclometalated iridium(III) complexes [Ir(C^N(1))(C^N(2))(L)], a family of cyclometalated complexes otherwise challenging to prepare. We used an iridium(I) complex, [{Ir(COD)(μ-Cl)}(2)], and a stoichiometric amount of two different C^N ligands (C^N(1) = ppy; C^N(2) = diFppy) as starting materials for the swift preparation of the chloro-bridged iridium(III) dimers. After reacting the mixture with acetylacetonate and subsequent purification, the tris-heteroleptic complex [Ir(ppy)(diFppy)(acac)] could be isolated with good yield from the crude containing as well the bis-heteroleptic complexes [Ir(ppy)(2)(acac)] and [Ir(diFppy)(2)(acac)]. Reaction of the tris-heteroleptic acac complex with hydrochloric acid gives pure heteroleptic chloro-bridged iridium dimer [{Ir(ppy)(diFppy)(μ-Cl)}(2)], which can be used as starting material for the preparation of a new tris-heteroleptic iridium(III) complex based on these two C^N ligands. Finally, we use DFT/LR-TDDFT to rationalize the impact of the two different C^N ligands on the observed photophysical and electrochemical properties.     

Development of Strong Visible-Light-Absorbing Cyclometalated Iridium(III) Complexes for Robust and Efficient Light-Driven Hydrogen Production

Weak light absorption of common Ir(III) complexes (e. g., using phenylpyridine as the ligand) has hindered their applications in photocatalytic hydrogen generation from water as an efficient photosensitizer. To address this issue, a series of cyclometalated Ir(III) complexes (Ir1–Ir5), featuring different electron-donating substituents to enhance the absorptivity, have been synthesized and studied as photosensitizers (PSs) for light-driven hydrogen production from water. Ir6–Ir7 were prepared as fundamental systems for comparisons. Electron donors, including 9-phenylcarbazole, triphenylamine, 4,4′-dimethoxytriphenylamine, 4,4′-di(N-hexylcarbazole)triphenylamine moieties were introduced on 6-(thiophen-2-yl)phenanthridine-based cyclometalating (C^N) ligands to explore the donor effect on the hydrogen evolution performance of these cationic Ir(III) complexes. Remarkably, Ir4 with 4,4′-dimethoxytriphenylamine achieved the highest turn-over number (TON) of 12 300 and initial turnover frequency (TOF_i) of 394 h⁻¹, with initial activity (activity_i) of 547 000 μmol g⁻¹ h⁻¹ and initial apparent quantum yield (AQY_i) of 9.59 %, under the illumination of blue light-emitting diodes (LEDs) for 105 hours, which demonstrated a stable three-component photocatalytic system with high efficiency. The TON (based on n(H₂)/n(PSr)) in this study is the highest value reported to date among the similar photocatalytic systems using Ir(III) complexes with Pt nanoparticles as catalyst. The great potential of using triphenylamine-based Ir(III) PSs in boosting photocatalytic performance has also been shown.     

BORAZANs: tunable fluorophores based on 2-(pyrazolyl)aniline chelates of diphenylboron

The reaction between 2-pyrazolyl-4-X-anilines, H(pzAnX), (X = para-OMe (L1), Me (L2), H (L3), Cl (L4), CO2Et (L5), CF3 (L6), CN (L7)) and triphenylboron in boiling toluene affords the respective, highly emissive N,N'-boron chelate complexes, BPh2(pzAnX) (X = para-OMe (1), Me (2), H (3), Cl (4), CO2Et (5), CF3 (6), CN (7)) in high yield. The structural, electrochemical, and photophysical properties of the new boron complexes can be fine-tuned by varying the electron-withdrawing or -donating power of the para-aniline substituent (delineated by the substituent's Hammett parameter). Those complexes with electron-withdrawing para-aniline substituents such as CO2Et (5), CF3 (6), and CN (7) have more planar chelate rings, more 'quinoidal' distortion in the aniline rings, greater chemical stability, higher oxidation potentials, and more intense (phiF = 0.81 for 7 in toluene), higher-energy (blue) fluorescent emission compared to those with electron-donating substituents. Thus, for 1 the oxidation potential is 0.53 V versus Ag/AgCl (compared to 1.12 V for 7), and the emission is tuned to the yellow-green but at an expense in terms of lower quantum yields (phiF = 0.07 for 1 in toluene) and increased chemical reactivity. Density functional calculations (B3LYP/6-31G*) on PM3 energy-minimized structures of the ligands and boron complexes reproduced experimentally observed data and trends and provided further insight into the nature of the electronic transitions.     

Synthesis of facial cyclometalated iridium(III) complexes triggered by tripodal ligands

The tripodal ligands composed of the 1,3,5-trisubstituted cyclohexyl moiety as a molecular scaffold and 2-phenylpyridyl moieties as a coordination site were designed. The homoleptic cyclometalated fac-Ir(C^N)(3) complexes could be obtained by the reaction of IrCl(3)·nH(2)O with the designed tripodal ligands. The single crystal X-ray structure determination confirmed the fac configuration and a distorted octahedral geometry with three intramolecular cyclometalated 2-phenylpyridyl ligands surrounding the iridium metal center. Also, the cyclohexyl scaffold was found to serve as a flexible scaffold to induce the fac configuration. The thus-obtained homoleptic cyclometalated fac-Ir(C^N)(3) complexes exhibited a broad emission band in the emission spectra at 298 K.     

Proton electroreduction catalyzed by cobaloximes: functional models for hydrogenases

Cobaloximes have been examined as electrocatalysts for proton reduction in nonaqueous solvent in the presence of triethylammonium chloride. [Co(III)(dmgH)2pyCl], working at moderate potentials (-0.90 V/(Ag/AgCl/3 mol x L(-1) NaCl) and in neutral conditions, is a promising catalyst as compared to other first-row transition metal complexes which generally function at more negative potentials and/or at lower pH. More than 100 turnovers can be achieved during controlled-potential electrolysis without detectable degradation of the catalyst. Cyclic voltammograms simulation is consistent with a heterolytic catalytic mechanism and allowed us to extract related kinetic parameters. Introduction of an electron-donating (electron-withdrawing) substituent in the axial pyridine ligand significantly increases (decreases) the rate constant of the catalytic cycle determining step. This effect linearly correlates with the Hammet coefficients of the introduced substituents. The influence of the equatorial glyoxime ligand was also investigated and the capability of the stabilized BF2-bridged species [Co(dmgBF2)2(OH2)2] for electrocatalyzed hydrogen evolution confirmed.