Interstitial vortex in superconducting film with periodic hole arrays

The response of superconducting Nb films with a diluted triangular and square array of holes to a perpendicular magnetic field are investigated.Due to small edge-to-edge separation of the holes,the patterned films are similar to multi-connected superconducting islands.Two regions in the magnetoresistance R(H) curves can be identified according to the field intervals of the resistance minima.Moreover,in between these two regions,variation of the minima spacing was observed.Our results provide strong evidence of the coexistence of interstitial vortices in the islands and fluxoids in the holes.     

Bandgap properties of Kagomé photonic crystal fibers

Photonic crystal fibers (PCFs) can guide light by the photonic bandgap (PBG) effect created by the periodically arranged air holes in the cladding. In this paper, the bandgap properties of Kagomé photonic crystal fibers (KPCFs) are investigated in detail. First, the bandgap properties of PCFs based on the basic Kagomé lattice are analyzed and compared with the PBGs of PCFs based on honeycomb and triangular lattices. We highlight the similarities between KPCFs and honeycomb PCFs in their PBGs, both having air-guiding regions only at very large air filling fractions (AIFs), whereas the PBGs of triangular PCFs can have large air-guiding regions at smaller AIFs due to the difference in the gap structure. In the second half of this paper, we show how the PBGs of KPCFs can be modified by introducing an extra air hole into the vacant space of the original lattice. In particular, KPCFs with medium-sized air holes can be designed to guide air by introducing extra air holes of a larger size. The air-guiding regions of KPCFs with very large air holes can also be greatly extended by the extra air holes. These air-guiding regions occur at higher normalized frequencies, resulting in larger air hole pitches favorable for fabrication. PACS 42.70.Qs; 42.25.Bs; 42.81.Qb     

GaAs均匀点状结构的分子束外延图形生长

报道了在(311)A腐蚀图形衬底上，用分子束外延(MBE)生长高度规则的三种点状结构的实验研究.样品表面的原子力显微镜和剖面的扫描电子显微镜测试结果表明，在不同尺寸的方形凹面腐蚀图形区域，原凹面之间形成了沿［233］晶向不完全和完全收缩的尖角形点状外延结构；而在方形台面腐蚀图形区域，台顶面之间形成了沿［233］方向收缩的脊形点状结构.分析认为这些均匀有序的三角形点状结构的形成是由非平面(311)A衬底上生长各向异性导致的必然结果，而构成这些点结构的晶面取向与原图形的取向相关.低温阴极荧光谱测试结果清晰地表 关键词：     

Wire network behavior of superconducting films with lower symmetrical mesoscopic hole arrays

Superconducting films with the same hole density but different geometric symmetry have been designed and fabricated. The R(H) curves show obvious periodic oscillations with several dips at fractional matching fields. It is found that the period of the oscillations in the low field is not necessary equal to that derived from the hole density, but consistent with that from the corresponding wire networks when the large disk-like film regions are regarded as nodes. The experimental results of R(H), T_c(H) and j_c(H) at fractional matching fields within the first oscillation also support the rationality of considering films with large-diametered hole arrays as wire networks. Our results demonstrate that the connectivity of superconducting films with large-diametered hole arrays plays a more important role in the oscillations of R(H) curves.     

金膜上亚波长小孔阵列表面等离激元颜色滤波器偏振性质

金属薄膜上制备的表面等离激元颜色滤波器具有很强的颜色可调性. 在200 nm厚的金膜上, 通过聚焦离子束刻蚀, 制备一系列周期逐渐变化的圆形、方形、矩形亚波长尺寸小孔方阵列表面等离激元颜色滤波器, 改变入射光的偏振方向, 观察其超透射滤波现象. 研究发现: 对于矩形小孔阵列, 其透射光颜色随入射光偏振方向的变化而改变; 而对于圆形、方形的小孔阵列, 其透射光颜色对入射光的偏振方向并不敏感. 分析表明, 对于金膜上刻蚀的小孔结构, 虽然结构的周期性导致的表面等离激元极化子会对透射光的颜色变化产生一定影响, 但是随小孔形状变化的局域表面等离激元共振才是影响透射光颜色的决定性因素. 如果入射光没有在小孔中激发出局域表面等离激元, 则表面等离激元极化子对透射光的影响也会消失. 根据不同形状小孔周期结构透射光颜色随入射光的偏振变化特点, 制备出了包含两种小孔形状的复合周期结构. 随着入射光偏振方向的改变, 该结构会显示出不同的颜色图案. 关键词： 表面等离激元极化子 局域表面等离激元 颜色滤波器 亚波长小孔阵列     

电流磁场作用下YBCO颗粒膜的非平衡微波响应

文中从二维 Josephson弱连接网络模型出发 ,讨论了二维超导体系的磁通“涡流 -反涡流”束缚对的激发问题 ,并进一步讨论了涡旋在电流、磁场作用下的激发问题 ,给出了自由涡旋的密度分布 n(I,H ,T)随温度的分布图 ,对比高温超导体的非平稳微波响应曲线图 ,发现两者具有相似的分布特征。该结果表明 ,高温超导体的非平稳微波响应与磁通“涡旋 -反涡旋”束缚对的激发有关。     

Triangular antidot array to honeycomb wire network – Role of interstitial vortices

We present results on interesting vortex matching effects that arise out of the interplay between the geometric shape of the vortex and the geometry of the underlying nano-engineered antidot lattice in Nb thin films. The antidots are in the shape of honeycomb with gradually increasing area such that one essentially goes over from a triangular antidot array to a honeycomb wire network. The fractional matching at 1/2 is absent in the antidot array limit hinting towards a possible role of the interstitial vortices.     

Enlargement of absolute photonic band gap in modified 2D anisotropic annular photonic crystals

We analyze the absolute photonic band gap in two dimensional (2D) square, triangular and honeycomb lattices composed of air holes or rings with different geometrical shapes and orientations in anisotropic tellurium background. Using the numerical plane wave expansion method, we engineer the absolute photonic band gap in modified lattices, achieved by addition of circular, elliptical, rectangular, square and hexagonal air hole or ring into the center of each lattice unit cell. We discuss the maximization of absolute photonic band gap width as a function of main and additional air hole or ring parameters with different shapes and orientation.     

场发射冷阴极微栅孔阵列制备技术

实现了一种采用聚苯乙烯纳米球自组装技术和微机械制造技术加工的场发射阴极用亚微米栅极微孔阵列。设计了一套完整的工艺实验方案,首先采用微球自组装技术获得了亚微米级金属网孔掩膜,然后通过反应离子刻蚀技术获得了亚微米栅极孔阵列,从而实现了集成度高、分布均匀的周期性亚微米孔洞阵列的制备,微孔集成度达到108cm-2。实验研究了氧气刻蚀聚苯乙烯微球的规律。采用金属掩膜,四氟化碳干法刻蚀二氧化硅,获得了深度为500 nm的微孔。实验结果证明该工艺方案是一种获得大面积、均匀分布、集成度高的场发射冷阴极栅孔阵列的有效方法。     

Non-destructive inspection of drilled holes in reinforced honeycomb sandwich panels using active thermography

The aerospace industry is in constant need of ever-more efficient inspection methods for quality control. Product inspection is also essential to maintain the safe operation of aircraft components designed to perform for decades. This paper proposes a method for non-destructive inspection of drilled holes in reinforced honeycomb sandwich panels. Honeycomb sandwich panels are extensively employed in the aerospace industry due to their high strength and stiffness to weight ratios. In order to attach additional structures to them, panels are reinforced by filling honeycomb cells and drilling holes into the reinforced areas. The proposed procedure is designed to detect the position of the holes within the reinforced area and to provide a robust measurement of the distance between each hole and the boundary of the reinforced area. The result is a fast, safe and clean inspection method for drilled holes in reinforced honeycomb sandwich panels that can be used to robustly assess a possible displacement of the hole from the center of the reinforced area, which could have serious consequences. The proposed method is based on active infrared thermography, and uses state of the art methods for infrared image processing, including signal-to-nose ratio enhancement, hole detection and segmentation. Tests and comparison with X-ray inspections indicate that the proposed system meets production needs.     

Magnetic correlations in the Hubbard model on triangular and Kagomé lattices

In order to study the magnetic properties of frustrated metallic systems, we present, for the first time, quantum Monte Carlo data on the magnetic susceptibility of the Hubbard model on triangular and kagomé lattices. We show that the underlying lattice structure determines the nature and the doping dependence of the magnetic fluctuations. In particular, in the doped kagomé case we find strong short-range magnetic correlations, which makes the metallic kagomé systems a promising field for studies of superconductivity.     

Mid-infrared optical resonances in quantum dot photodetectors coupled with metallic gratings with different aperture diameters

The paper is devoted to optical testing of mid-infrared Ge/Si photodetectors obtained by stacking of self-assembled Ge quantum dots in multilayer structures, which are near-field coupled to the adjacent nanoplasmonic arrays of subwavelength holes in metallic films. It is shown that photocurrent and near-field spectra consist of several sets of peaks, which are attributted to surface plasmon waves, localized surface plasmon modes or diffractive Rayleigh anomaly depending on the hole diameter and the angle of incidence θ. We find that for small holes the greatest contribution to the photocurrent enhancement is due to the excitation of the surface plasmon-polariton waves for all θ. As the hole diameter is increased and becomes comparable with the array periodicity, the normal-incident photoresponse improvement is provided by the Rayleigh anomaly. With the increase of incident angle, the photocurrent enhancement is supposed to arise from coupling of the localized shape resonance and propagating plasmon modes.     

Experimental studies of extraordinary light transmission through periodic arrays of subwavelength square and rectangular holes in metal films

We fabricate a series of periodic arrays of subwavelength square and rectangular air holes on gold films, and measure the transmission spectra of these metallic nanostructures. By changing some geometrical and physical parameters, such as array period, air hole size and shape, and the incident light polarization, we verify that both global surface plasmon resonance and localized waveguide mode resonance are influential on enhancing the transmission of light through nanostructured metal films. These two resonances induce different behaviours of transmission peak shift. The transmission through the rectangular air-hole structures exhibits an obvious polarization effect dependent on the morphology. Numerical simulations are also made by a plane-wave transfer-matrix method and in good consistency with the experimental results.     

人工局域表面等离激元诱导的超透射

利用有限元方法研究了理想导体薄膜中齿状孔阵列在微波频段的超透射现象.齿状结构的引入使得孔阵列的透射谱发生红移,在更深的亚波长区实现全透射.近场分析表明分布在齿状孔上的局域态对红移起了关键作用.研究发现单个齿孔支持人工局域表面等离激元多极子模式,与超透射相关的是偶极子模式.该研究方案可以推广到红外与太赫兹频段.     

孪生孔光子晶体光纤

在光子晶体光纤典型的空气孔三角形排布图案中,将每个空气孔替换为一对孪生空气孔对,孪生空气孔对之间有确定的间距和固定的轴向,并由其形成包层的基本单元.在端面中心位置缺失一孪生空气孔对,由高折射率的背景材料将光场束缚于此形成纤芯.在包层中所有的孪生空气孔对按照三角形规则均匀排列.在这种新型结构中,由于所有孪生空气孔对都具有相同轴向而使得两个正交方向上的折射率不对称,从而导致双折射效应.本文利用有限差分法进行数值计算,所设计孪生空气孔对光子晶体光纤在两个正交方向上的折射率差Δneff可达到10－4.孪生空气孔对结构参量可在一定程度上影响双折射效果,增大空气孔或减小孪生空气孔对内部间距都可在一定程度上增大双折射效应.     

Dispersion management with microstructured optical fibers: ultraflattened chromatic dispersion with low losses

We numerically demonstrate ultraflattened chromatic dispersion with low losses in microstructured optical fibers (MOFs). We propose using two different MOF structures to get this result. Both structures are based on a subset of a triangular array of cylindrical air holes; the cross sections of these inclusions are circular, and a missing hole in the fiber's middle forms the core. In this MOF structure the diameters of the inclusions increase with distance from the fiber axis until the diameters reach a maximum. With this new design and with three different hole diameters, it requires only seven rings to reach the 0.2-dB/km level at lambda = 1.55 microm with a variation amplitude of dispersion below 3.0 x 10(-2) ps nm(-1) km(-1) of lambda = 1.5-1.6 microm. With the usual MOF (made from holes of identical diameter), we show that at least 18 hole rings are required for losses to decrease to < 1 dB/km at lambda = 1.55 microm.     

太阳极区冕洞内小尺度结构的紫外光谱研究

SOHO/SUMER太阳紫外光谱仪的N Ⅳ谱线观测到太阳南极区冕洞内存在许多小尺度结构,其空间尺度约1～几角秒,寿命尺度约1～几min。小尺度结构沿狭缝方向呈条状,视向多普勒速度可至几十km·s-1。在有的南极区冕洞区域内,小尺度结构的视向多普勒速度呈红、蓝移准周期性交错分布,持续时间长达100 min。部分小尺度结构在同一观测窗口的高温Ne ⅤⅢ谱线还可清晰显现。有的小尺度结构在Ne ⅤⅢ速度演化图的时间和位置与N Ⅳ 谱线速度图基本一致,但它们在Ne ⅤⅢ速度演化图中更延展和弥散。N Ⅳ紫外光谱显示部分小尺度结构谱线呈现非高斯形状,谱线两翼速度可达150 km·s-1,与太阳过渡区爆发事件的光谱特征相似。太阳过渡区爆发事件常出现在宁静区,SOHO/SUMER太阳紫外光谱仪的N Ⅳ谱线显示在南极区冕洞也可产生爆发事件,且具有较强的动力学特征。     

Holes localized on a Skyrmion in a doped antiferromagnet on the honeycomb lattice: Symmetry analysis

Using the low-energy effective field theory for hole-doped antiferromagnets on the honeycomb lattice, we study the localization of holes on Skyrmions, as a potential mechanism for the preformation of Cooper pairs. In contrast to the square lattice case, for the standard radial profile of the Skyrmion on the honeycomb lattice, only holes residing in one of the two hole pockets can get localized. This differs qualitatively from hole pairs bound by magnon exchange, which is most attractive between holes residing in different momentum space pockets. On the honeycomb lattice, magnon exchange unambiguously leads to f$f$-wave pairing, which is also observed experimentally. Using the collective-mode quantization of the Skyrmion, we determine the quantum numbers of the localized hole pairs. Again, f$f$-wave symmetry is possible, but other competing pairing symmetries cannot be ruled out.     

Cavity resonant mode in a metal film perforated with two-dimensional triangular lattice hole arrays

The transmission property of metallic films with two-dimensional hole arrays is studied experimentally and numerically. For a triangular lattice subwavelength hole array in a 150 nm thick Ag film, both cavity resonance and planar surface modes are identified as the sources of enhanced optical transmissions. Semi-analytical models are developed for calculating the dispersion relation of the cavity resonant mode. They agree well with the experimental results and full-wave numerical calculations. Strong interaction between the cavity resonant mode and surface modes is also observed.     

Low-energy singlets in the Heisenberg antiferromagnet on the kagomé lattice

The spin-1/2 Heisenberg antiferromagnet on the kagomé lattice, is mapped by contractor renormalization to a spin-pseudospin Hamiltonian on the triangular superlattice. Variationally, we find a ground state with columnar dimer order. Dimer orientation fluctuations are described by an effective O(2) model at energies above an exponentially suppressed clock mass scale. Our results explain the large density of low-energy singlets observed numerically, and the nonmagnetic T2 specific heat observed experimentally.