Crown ether styryl dyes

The stoichiometry of complexation of crown ether styryl dyes with Mg²⁺, Ca²⁺, and Ba²⁺ ions and the dependence of the stability constants of these complexes on the length of theN-sulfoalkyl substituent were investigated. Introduction of a terminal sulfo group into theN-ethyl substituent had but a small effect on the stability constant for the complexes with 1 : I stoichiometry. Increase in the length of theN-substituent by one or two methylene groups resulted in a jumpwise rise of this constant. The effect observed was attributed to the formation of the intramolecular ion pair. The dimerization constant for Mg²⁺ complexes increased dramatically when passing from the sulfopropylN-substituent to the sulfobutyl one. The increase in the constant results from the decrease in steric strains in the dimeric complex.For Part 16, see Ref. ITranslated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 605–613, March, 1996.     

Electro-optical triple-channel sensing of metal cations via multiple signalling patterns

We described two molecular systems containing tricyanovinyl dyes as signalling subunits and crown ether macrocycles as binding sites, which act as triple-channel sensing receptors. Signalling was observed through UV-vis, fluorescence and electro-chemical measurements. With these three techniques sensing of certain metal cations was achieved via multiple signalling patterns.     

Recoordination of a metal ion in the cavity of a crown compound: a theoretical study. 1. Conformers of arylazacrown ethers and their complexes with Ca2+ cation

Photoinduced recoordination of Ca²⁺ complexes of the photochromic azacrown ethers is studied by the density functional method. The study included model arylazacrown ethers containing various acceptor groups in the aromatic ring in the para position to the azacrown ether moiety and a real azacrown-containing styryl dye. It is found that both free azacrown ethers and their complexes can adopt two types of conformations: (1) axial conformations, in which the aromatic ring axis passing through the crown ether nitrogen N_cr and the opposite atom of the aromatic ring is perpendicular to the root-mean-square (RMS) plane of the crown ether (least-squares fitted plane for all the crown ether atoms), and (2) equatorial conformations, in which the aromatic ring axis only slightly deflects from the RMS plane of the crown ether. In the equatorial conformers, the metal cation is coordinated only to the O atoms of the azacrown ether cycle, the metal—nitrogen bond is broken, and N_cr is conjugated with the aromatic ring. In the axial conformers, the metal cation is additionally coordinated to N_cr. It is found that the presence of an acceptor group bearing a formal positive charge decreases the relative energy of the equatorial conformer and favors metal—nitrogen bond dissociation, which results in the recoordination of the metal cation. However, a long distance between the charged group and N_cr has the reverse effect. The photoinduced recoordination observed in the alkaline-earth metal complexes of the photochromic azacrown ethers is explained by the transitions between the axial and equatorial conformers facilitated by the charge transfer in the excited state of the complex.     

Styryl dyes. Synthesis and study of the solid-state [2+2] autophotocycloaddition by NMR spectroscopy and X-ray diffraction

New styryl dyes of the pyridine and benzothiazole series were synthesized with the aim of investigating the solid-state [2+2] autophotocycloaddition (PCA) reaction. The ¹H NMR spectroscopy showed that for most of the compounds under study, the visible light irradiation of thin polycrystalline films of the dyes affords cyclobutane derivatives. The rate of the photoreaction depends on the structure of the dye and is higher for compounds, which contain a short N-substituent in the heterocyclic moiety and have strong absorption in the visible region. Dyes bearing electron-releasing substituents in the benzene ring undergo the stereospecific PCA in the syn-head-to-tail dimeric pair to give the only rctt isomer of cyclobutane derivatives. Electron-withdrawing and bulky substituents in the benzene fragment of styryl dyes extend the range of the mutual orientations of the molecules in the dimeric pairs, resulting in the formation of two or even four isomeric cyclobutanes in the PCA reactions. The structures of some dyes were established by X-ray diffraction. In the overwhelming majority of the structures, one of two packing modes, either syn-head-to-tail or syn-head-to-head, with extensive stacking interactions is observed. A rare example of the anti-head-to-head stacking mode was found for the dicationic dye containing the bulky N⁺(Et)Me₂ substituent in the benzene ring. The syn-head-to-tail and anti-head-to-head stacking modes can facilitate the PCA reaction due to the close spatial proximity of the ethylenic bonds and their parallel orientation in the dimeric pairs of the dye molecules. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1797–1819, September, 2007.     

A Conductometric Study of Complexation Reactions Between Dibenzo-18-Crown-6 (DB18C6) with Cu2+, Zn2+, Tl+ and Cd2+ Metal Cations in Dimethylsulfoxide–Ethylacetate Binary Mixtures

The complex formation between Cu²⁺, Zn²⁺, Tl⁺ and Cd²⁺ metal cations with macrocyclic ligand, dibenzo- 18-crown-6 (DB18C6) was studied in dimethylsulfoxide (DMSO)–ethylacetate (EtOAc) binary systems at different temperatures using conductometric method. In all cases, DB18C6 forms 1:1 complexes with these metal cations. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, Genplot. The non-linear behaviour which was observed for variations of log K _f of the complexes versus the composition of the mixed solvent was discussed in terms of changing the chemical and physical properties of the constituent solvents when they mix with one another and, therefore, changing the solvation capacities of the metal cations, crown ether molecules and even the resulting complexes with changing the mixed solvent composition. The results show that the selectivity order of DB18C6 for the metal cations in pure ethylacetate and pure dimethylsulfoxide is: Tl⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ but the selectivity order is changed with the composition of the mixed solvents. The values of enthalpy changes (ΔH°_C) for complexation reactions were obtained from the slope of the van’t Hoff plots and the changes in standard enthalpy (ΔS°_C) were calculated from the relationship: ΔG°_C,298.15=ΔH°_C − 298.15 ΔS°_C. The obtained results show that in most cases, the complexes are enthalpy stabilized, but entropy destabilized and the values of ΔH°_C and ΔS°_C depend strongly on the nature of the medium.     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday     

Lower rim 1,3-di-amide-derivative of calix[4]arene possessing bis-{N-(2,2′-dipyridylamide)} pendants: a dual fluorescence sensor for Zn and Ni

Single crystal XRD structure of the lower rim 1,3-di-amide-derivative of calix[4]arene possessing bis-{N-(2,2′-dipyridylamide)} pendants (L) exhibit two distinct binding cores, viz., N₄ and O₆. L was found to be selective for Zn²⁺ by switch-on and for Ni²⁺ by switch-off fluorescence by forming 1:1 complexes. The binding and the composition of the complex formed have been addressed based on steady state and time-resolved fluorescence spectroscopy in addition to the absorption and ESI MS. As L can detect Zn²⁺ and Ni²⁺ to a concentration as low as 142 and 203 ppb, respectively, L can be a very sensitive molecular probe for these ions. The coordination details of the metal ion-bound complexes have been addressed based on ab initio calculations showing that the stabilization energies are commensurate with the coordination formed.     

Conformationally regulated fluorescent sensors. Study of the selectivity in Zn versus Cd sensing

The Zn²⁺ and Cd²⁺ complexing properties of four ligands containing a 4,4′-substituted biphenyl moiety are described. Ligands 1 and 3, containing only one 1-aza-18-crown-6 cavity, lead to selective complexation of Cd²⁺ versus Zn²⁺. Ligand 4, with two crown cavities linked to a tetramethylbenzidine unit, is able to form 1:1 complexes with Zn²⁺ and Cd²⁺, showing a higher complexing constant with Zn²⁺ than with Cd²⁺, probably due to enthalpic factors. Several complementary experiments suggest that the 1:1 complexes formed by ligand 4 involve both crown cavities acting together to give rise to clamp structures. The formation of this type of zinc complex gives rise to red shifted emission bands and distinct quenching of the fluorescence. A similar situation is observed with cadmium but the change is then less pronounced. When mixtures of both salts are used, ligand 4 selectively responds to zinc. Finally, ligand 2, which also has two crown cavities but contains nitro rather than amino groups in the biphenyl moiety, shows no propensity to form clamp complexes and, for this reason, it complexes cadmium much more strongly than zinc and binds the former selectively when mixtures of both salts are used in complexing experiments.     

Crown-containing styryl dyes

Styryl dyes containing a crown ether group and a heteroaromatic moiety with a sulfoalkylN-substituent (1a,b) undergo photocyclodimerization in acetonitrile in the presence of Mg(ClO₄)₂ to give only the typeA isomer of cyclobutane derivative (2a,b). The photochemical regio- and stereoselectivity of the cycloaddition is explained by self-organization of thetrans-isomers of the styryl dyes upon complexation with the Mg²⁺ cations into dimers with a fixed mutual arrangement of multiple bonds.For part 7, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1449–1452, August, 1993.     

A squaraine-based chemosensor for Hg and Pb

A novel unsymmetrical cationic squaraine dye (USqH⁺), absorbing in the near-infrared region (600-850 nm), was synthesized by reacting a semi-squaric acid derivative 3-[4-(N,N-dioctylamino)phenyl]-4-hydroxycyclobutene-1,2-dione with the squarylium dye, bis(3-methylbenzothiazol-2-ylidene)squaraine. Addition of micromolar amounts of Hg²⁺ and Pb²⁺ to solutions of USqH⁺ in dichloromethane brings about significant changes in its absorption spectrum, resulting in a change in colour of the solution from green to pink. The absorption spectrum of the dye is relatively insensitive to other environmentally relevant metal ions, making it possible to visually detect Hg²⁺ and Pb²⁺ in the presence of other metal ions. Molecular modeling of the complexes at the density functional theory (DFT) and semiempirical PM3 levels strongly suggests that the oxygen atoms are the most likely choice for cation binding. The calculations also indicate a high affinity of Hg²⁺ and Pb²⁺ toward the formation of 2:1 complexes, which is in good agreement with the experimental results.     

Crown ether styryl dyes

A novel styryl dye containing benzodithia-18-crown-6 andN-(4-sulfobutyl)benzothiazolium fragments was synthesized. The complex formation of thecis-isomers of several photochromic styryl dyes containing dithia-15(18)-crown-5(6) fragments with Hg²⁺ and Mg²⁺ ions was studied. The stability constants of the complexes with Mg²⁺ and the relative stability constants of the complexes with Hg²⁺ (with respect to benzo-1,10-dithia-18-crown-6 ether) were measured. The fact that the stability constant increases 11-fold on going from thetrans- to the correspondingcis-isomer was attributed to the formation of an anion-“capped” complex. For Part 22, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2213–2220, December, 1997.     

The Synthesis of Dibenzo[3n]crown-n by Novel Methods and their Cation Binding Studied by Fluorescence Spectroscopy. Part IV

The dibenzo[3n]crown-n were synthesised from1,2-bis(o-hydroxyphenoxy)ethane obtained from 1,2-bis(o-formylphenoxy)ethane via Bayer-Willigeroxidations with H₂O₂/CH₃COOH in good yields. The cyclic condensation of 1,2-bis(o-hydroxyphenoxy)ethanewith dichlorides, and ditosylates of polyethylene glycols in DMF/Me₂CO₃ gave the macrocyclesdibenzo[15]crown-5, dibenzo[18]crown-6, dibenzo[21]crown-7 anddibenzo[24]crown-8. The structures were identified using IR, mass, ¹H and ¹³C NMR spectroscopy. Therecognition of the molecules for the cations, Li⁺, Na⁺, K⁺, Rb⁺ and Zn²⁺were conducted quantitatively with steady state fluorescencespectroscopy. The 1:1 association constants in acetonitrileshowed a good relation of the appropriate size of the macrocyclic ether towards the fitting cationradii. Namely, dibenzo[15]crown-5 was the best for Li⁺ binding and more than 100 times better thanNa⁺ and K⁺. Dibenzo[21]crown-7 was excellent for Rb⁺ binding while K⁺ is 100 timesless preferred. The largest crown ether studied, dibenzo[24]crown-8, exhibited the order of binding power,Rb⁺ > K⁺ > Na⁺. Zn²⁺ displayed, however, a marked binding with only dibenzo[18]crown-6.p>     

Observation of an unusually facile fragmentation pathway of gas-phase peptide ions: a study on the gas-phase fragmentation mechanism and energetics of tryptic peptides modified with 4-sulfophenyl isothiocyanate (SPITC) and 4-chlorosulfophenyl isocyanate (SPC) and their 18-crown-6 complexes

Various peptide modifications have been explored recently to facilitate the acquisition of sequence information. N-terminal sulfonation is an interesting modification because it allows unambiguous de novo sequencing of peptides, especially in conjunction with MALDI-PSD-TOF analysis; such modified peptide ions undergo fragmentation at energies lower than those required conventionally for unmodified peptide ions. In this study, we systematically investigated the fragmentation mechanisms of N-terminal sulfonated peptide ions prepared using two different N-terminal sulfonation reagents: 4-sulfophenyl isothiocyanate (SPITC) and 4-chlorosulfophenyl isocyanate (SPC). Collision-induced dissociation (CID) of the SPC-modified peptide ions produced a set of y-series ions that were more evenly distributed relative to those observed for the SPITC-modified peptides; y(n-1) ion peaks were consistently and significantly larger than the signals of the other y-ions. We experimentally investigated the differences between the dissociation energies of the SPITC- and SPC-modified peptide ions by comparing the MS/MS spectra of the complexes formed between the crown ether 18-crown-6 (CE) and the modified peptides. Upon CID, the complexes formed between 18-crown-6 ether and the protonated amino groups of C-terminal lysine residues underwent either peptide backbone fragmentation or complex dissociation. Although the crown ether complexes of the unmodified ([M + CE + 2H]2+) and SPC-modified ([M* + CE + 2H]2+) peptides underwent predominantly noncovalent complex dissociation upon CID, the low-energy dissociations of the crown ether complexes of the SPITC-modified peptides ([M' + CE + 2H]2+) unexpectedly resulted in peptide backbone fragmentations, along with a degree of complex dissociation. We performed quantum mechanical calculations to address the energetics of fragmentations observed for the modified peptides.     

Gas phase and solution state stability of complexes L…M, where M = Cu, Ni, or Zn and L = R−C(O)NHOH (R = H, NH2, CH3, CF3, or Phenyl)

The structure and gas-phase metal affinities (M = Cu²⁺, Ni²⁺, and Zn²⁺) of formohydroxamic acid derivatives R–C(O)NHOH (R = H, NH₂, CH₃, CF₃ and Phenyl) were studied using the B3LYP/6-311+G(d,p) method of DFT theory. In order to evaluate the conformational behavior of these systems in water, we carried out CPCM-SCRF optimization calculations at the B3LYP/6-311+G(d,p) levels of theory. The obtained optimized geometries and interaction affinities of the gas and solution phase were compared. The following order of stability was found for ionic complexes of the transition metals: Cu²⁺ > Ni(t)²⁺ > Zn²⁺. The same stability order would be expected according to the Irving–Williams order of stability constants. The high-spin complexes of the Ni²⁺ were more stable than the low-spin complexes. The solvent effect reduced the observed relative stability of individual metallic complexes of substituted hydroxamic acids.     

Imidazo-benzo-15-crown-5 ethers bearing arylthienyl and bithienyl moieties as novel fluorescent chemosensors for Pd and Cu

Novel fluorescent ionophores bearing imidazo-arylthienyl or imidazo-bithienyl π-conjugated bridges functionalized with one or two fused benzo-15-crown-5 ethers as receptor units are reported. The sensing ability of the compounds in the presence of metallic cations (Li⁺, Na⁺, K⁺, Ca²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Pd²⁺, and Hg²⁺) and fluoride ion was studied in MeCN/DMSO solutions by absorption and emission spectroscopy. The experimental results indicate that all compounds could act as selective fluorimetric sensors for Cu²⁺ and Pd²⁺ and also for the fluoride ion, in the case of the bis-substituted crown ether derivatives.     

Synthesis, NMR characterization and ion binding properties of 1,3-bridged p-tert-butyldihomooxacalix[4]crown-6 bearing pyridyl pendant groups

1,3-Di(2-pyridylmethoxy)-p-tert-butyldihomooxacalix[4]arene-crown-6 (2) was synthesized for the first time. 2 was isolated in a cone conformation in solution at room temperature, as established by NMR spectroscopy (¹H, ¹³C and NOESY). Complete assignment of both proton and carbon NMR spectra was achieved by a combination of COSY, HSQC and HMBC experiments. The binding properties of ligand 2 towards alkali, alkaline earth, transition and heavy metal cations have been assessed by phase transfer and proton NMR titration experiments. The results are compared to those obtained with other dihomooxacalix[4]arene-crowns-6 and closely-related calix[4]arene-crown derivatives. 2 shows a preference for the soft heavy metal cations (except for Cd²⁺), with a very strong affinity for Ag⁺. Some transition metal cations are also well extracted. 2 forms 1:1 complexes with K⁺, Ca²⁺ and Ag⁺, and ¹H NMR titrations indicate that they should be encapsulated into the cavity defined by the crown ether unit and by the two pyridyl pendant arms. A 1:2 (ML₂) complex is formed with Zn²⁺ and two species, probably 1:1 and 1:2 complexes, are obtained with Pb²⁺.     

Study of Complex Formation Between Dicyclohexano-18-Crown-6 (DCH18C6) with Mg 2+, Ca2+, Sr 2+, and Ba2+ Cations in Methanol–Water Binary Mixtures Using Conductometric Method

The complexation reactions between Mg²⁺,Ca²⁺,Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, dicyclohexano-18-crown-6 (DCH18C6) were studied in methanol (MeOH)–water (H₂O) binary mixtures at different temperatures using conductometric method . In all cases, DCH18C6 forms 1:1 complexes with these metal cations. The values of stability constants of complexes which were obtained from conductometric data show that the stability of complexes is affected by the nature and composition of the mixed solvents. While the variation of stability constants of DCH18C6-Sr ²⁺ and DCH18C6-Ba²⁺versus the composition of MeOH–H₂O mixed solvents is monotonic, an anomalous behavior was observed for variations of stability constants of DCH18C6-Mg²⁺ and DCH18C6-Ca²⁺ versus the composition of the mixed solvents. The values of thermodynamic parameters (ΔH_c°, ΔS_c°) for complexation reactions were obtained from temperature dependence of formation constants of complexes using the van’t Hoff plots. The results show that in most cases, the complexation reactions are enthalpy stabilized but entropy destabilized and the values of thermodynamic parameters are influenced by the nature and composition of the mixed solvents. The obtained results show that the order of selectivity of DCH18C6 ligand for metal cations in different concentrations of methanol in MeOH–H₂O binary system is: Ba²⁺>Sr²⁺>Ca²⁺> Mg²⁺.     

Study of complexation of phenylaza-15-crwon-5, 4-nitrobenzo- 15-crown-5, and benzo-15-crown-5 with Ag+, Tl+ and Pb2+ ions in methanol by competitive potentiometry

The complexation reaction of phenylaza-15-crwon-5, 4- nitrobenzo- 15-crown-5, and benzo-15-crown-5 with Ag⁺, Tl⁺ and Pb²⁺ ions in methanol solution have been studied by a competitive potentiometric method. The Ag⁺/Ag electrode used both as an indicator and reference electrode in a concentration cell. The emf of cell monitored as the crown ethers concentration varies through the titration. The stoichiometry and stability constants of resulting complexes have been evaluated by MINIQUAD. The stoichiometry for all resulting complexes was 1:1. The stability of these metal ions with derivatives of 15-crown-5 are in order phenylaza-15-crown-5 > Benzo-15-crown-5 > 4-nitrobenzo-15-crown-5, and for the each used crown ethers are as Pb²⁺ > Ag⁺ > Tl⁺. The effect of the substituted group on the stability of resulting complexes was considered. The obtained results are novel and interesting.     

Quantum chemical analysis of possible fragmentation of [M + H]<Superscript>+</Superscript> and [M + Na]<Superscript>+</Superscript> complexes of monosubstituted methane,cyclohexane, and benzene derivatives in mass spectrometric studies

The formation and fragmentation energies of the proton and sodium cation complexes with monosubstituted methane, cyclohexane, and benzene derivatives in which carbon atoms are bonded to substituents (NH₂, OH, F, Cl, Br, ONO₂, NO₂, COOH, CN, and Ph) were calculated by the B3LYP/6-31G(d) method. For [M + Na]⁺ complexes, the formation energies are much lower (and differ from one another to a much lesser extent), while the dissociation energies are much higher, than the corresponding energies of the [M + H]⁺ complexes. Na⁺ cation shows a lower selectivity toward localization at functional groups in molecules compared to H⁺. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 246–249, February, 2008.     

SPECTROPHOTOMETRIC STUDY OF THE THERMODYNAMICS OF COMPLEXATION OF LITHIUM AND SODIUM IONS WITH DIBENZO-24-CROWN-8 IN BINARY DIMETHYLFORMAMIDE-ACETONITRILE MIXTURES USING MUREXIDE AS A METALLOCHROMIC INDICATOR

Abstract

Complexation of Li⁺ and Na⁺ with dibenzo-24-crown-8 has been studied in dimethylformamide-acetonitrile mixtures by means of a competitive spectrophotometric technique using murexide as metal ion indicator. Stabilities of the resulting 1:1 complexes were investigated at various temperatures and enthalpies and entropies of complexation were determined from the temperature dependence of the formation constants. Sodium forms a more stable complex with the crown ether than lithium. There is an inverse linear relationship between log K_f and the mole fraction of DMF in the solvent mixtures. The ΔH°-TΔS° plot of all thermodynamic data, obtained for both crown complexes in different solvent mixtures, shows a fairly good linear correlation, indicating the existence of an enthalpy-entropy compensation effect in complexation.