Fe（Ⅲ）—TEA—5—Br—PADAP—H2O2体系中催化波的研究及其应用

在０．２ｍｏｌ·Ｌ＾－１ＮＨ４Ｃｌ－ＮＨ３·Ｈ２Ｏ底液中，（ｐＨ为９．２６），得到一个极为灵敏的Ｆｅ（Ⅲ）－ＴＥＡ－５－Ｂｒ－ＰＡＤＡＰ－Ｈ２Ｏ２配合吸附催化波，其峰电位为－０．７１Ｖ（ｖｓ．ＳＣＥ）。铁浓度在１．８×１０＾－１０￣５．４×１０＾－６ｍｏｌ·Ｌ＾－１范围内与二阶导数波高呈线性关系。对该极谱波的性质进行了研究，证明是一种配合吸附催化波，并成功地应用于各类水样，钒催化剂中微量或痕量铁的     

大量锆存在下铪镧钼杂多酸—耐尔蓝体系测定给

本文研究了耐尔蓝（ＮＢ）－给镧钼杂多酸（ＨｆＬａＭｏ－聚乙烯醇（ＰＶＡ）体系测定铪的超高灵敏光度法。在ＰＶＡ存在下，铪，镧和钼酸铵形成杂多酸，继而与耐尔蓝形成离子缔合物。其适宜条件为〔ＨＣｌｏ４〕＝１．２ｍｏｌ／Ｌ，〔Ｌａ×３＋〕＝２．９×１０＾－７ｍｏｌ／Ｌ，〔ＭｏＯ４×２－〕＝１．１×１０＾－３ｍｏｌ／Ｌ，〔ＮＢ〕＝２．７×１０＾－６ｍｏｌ／Ｌ，ＰＶＡ０．０８％。离子缔合物的最大吸收波长在５９     

安替比林基重氮氨基—2,4—二硝基苯与汞（Ⅱ）的显色反应及其应用

本研究了试剂安替比林基重氮氨基－２４－二硝基苯（ＡＰＤＮＢＴ）与汞的显色反应，在Ｔｗｅｅｎ－８０存在下和ｐＨ＝１０．２～１２．３的缓冲溶液中，ＡＰＤＮＢＴ与汞生成黄色络合物，其络合比为Ｈｇ∶ＡＰＤＮＢＴ＝１∶２，建立了以４４５ｎｍ为参比波长，５３８ｎｍ为测量波长的双波长分光光度法，其表观摩尔吸光系数为２．１×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，线性范围是０     

钍（Ⅳ）与偶氮溴膦—mB和溴化十四烷基吡啶在乙醇—水溶液中的显色反应及其分

在ｐＨ１￣２的酸性介质中,钍（Ⅳ）与偶氮溴膦－ｍＢ（ＢＰＡｍＢ）形成最大吸收波长（λｍａｘ位于６８６ｎｍ的蓝色络合物,摩尔吸光系数（ε）为８．２７×１０＾４Ｌ·ｍｏｌ＾－１·ｃｍ＾－１。在有少量乙醇存在的０．５￣１．０ｍｏｌ／Ｌ盐酸溶液中,钍（Ⅳ）能与ＢＰＡｍＢ和溴化十四烷基吡啶形成更灵敏的三元络合物,最大吸收位于６９５ｎｍ,具有更大的对比度（Δλ＝１３５ｎｍ）和更高的灵敏度。ε值达１．４１×１０     

3,5—二溴—PADAP分光光度法测定微量NO2—离子的研究

系统研究了３,５－二溴－ＰＡＤＡＰ在酸性介质中质子化后与ＮＯ２和ＳＣ怙元离子缔合物的最佳条件。提出了测定微量ＮＯ２的光度新方法,表观摩尔吸光系数ε６３０＝１．２×１０＾４Ｌ·ｍｏｌ＾－１·ｃｍ＾－１,缔合物组成比为ｎ（３,５－ｆｇ ｉｔｈｄ－ＰＡＤＡＰ）：ｎ（ＮＯ２）：ｎ（ＳＣＮ）＝１：１：！。ｓｇ ｉｆ ｙｉｅｔｇｇｆｕｉｉ ｗｓｇ ｋ ｔｍｇ ｊｇ ＮＯ２ｒ ｉｍｐｇ,ｇｎ ｘ ｍａｗ ｙｙｉ     

催化褪色光度法测定痕量钡

Ｂａ＾２＋能在ｐＨ５弱酸性介质中催化十二烷基苯磺酸钠（ＤＢＳ）对铬黑Ｔ（ＥＢＴ０的褪色反应。详细研究了动力学条件,确立测定钡的最适宜催化动力学条件。表观摩尔吸光系数ε６２０＝３．０×１０＾－６Ｌ．ｍｏｌ＾－１ｃｍ＾－１,校正曲线方程为ｌｏｇＡ０／Ａ＝０．００６２６０＋０．０８７０４ＣＢａ＾２＋（μｇ／Ｌ）;线性范围０－１６μｇ／Ｌ（ｒ＝０．９９９１）;     

含有吸附络合物溶液的倒数示波计时电位法的应用

Ｐｂ（Ⅱ）在０．２％乙二胺－５×１０＾－３ｍｏｌ·Ｌ＾－１ＨＯｘ－０．３ｍｏｌ·Ｌ＾－１ＫＯＨ溶液中，有良好的全数示波图，其峰电位Ｅｐ＝－１．０５（ｖｓ．ＳＣＥ），峰高与Ｐｂ＾２＋溶度在４．０×１０＾－７～２．０×１０＾－５ｍｏｌ·Ｌ＾－１内成正比，检测下限可达２．０×１０＾－７ｍｏｌ·Ｌ＾－１。本实验采用倒数示波计时电位法对铝合金“Ａ”中铅进行了测定，并直接通过示波图，对络合物的吸附属于性进行了     

6—硝基喹啉的单扫示波极谱分析

研究了６－硝基喹啉在滴汞电极上的电极过程并建立了它的单扫示波极谱测定。在０．１０ｍｏｌ／ＬＮａＣｌ底液中，６－硝基喹啉的二阶导数阴极波峰电流ｉ＂ｐ（Ｅ＂ｐ＝－０．６６ＶｖｓＳＣＥ）浓度在１．０×１０＾－７－２．５×１０＾－５ｍｏｌ／Ｌ范围内有良好线性关系，检出限为４．２×１０＾－８ｍｏｌ／Ｌ，ＲＳＤ＝１。７％（ｎ＝６）。此外还考察了多种人体内常见微量物质及表面活性剂对ｉ＂ｐ的影响。     

膜富集分光光度法测定微量锌

以５－Ｂｒ－ＰＡＤＡＰ为显色剂，用ＷＸ型混合纤维素滤膜（孔径０．６５μｍ，φ２５ｍｍ）富集微量锌，用乙醇溶解富集物（Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ）分光光度法测定锌，Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ在乙醇溶液中最大吸收波长为５５５ｎｍ，表观摩尔吸光系数１．０９×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锌量在０．１～５．０μｇ／５ｍＬ，范围内符合比耳定律，本法灵敏度高，操作简便，应用于食品，水样中锌     

丁基罗丹明B—钼酸盐光度法连续测定铈和钪

在聚乙烯醇（ＰＶＡ）存在下，丁基罗丹明Ｂ（ＢＲＢ）分别与铈钼、钪钼杂多酸络阴离子形成离子缔合物，其最大吸收均位于５７０ｎｍ，表面摩尔吸光度分别为εＣｅ＝３．９６×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，εＳｃ＝４．７１×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，服从比耳定律范围分别为０－２４μｇ／Ｌ Ｃｅ和０－６０μｇ／ＬＳｃ，测定极限为Ｃｅ１．０μｇ／Ｌ（ｎ＝１２）和Ｓｃ１．９μｇ／Ｌ（ｎ＝１０），对     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.