Silsesquioxane models for geminal silica surface silanol sites. A spectroscopic investigation of different types of silanols

The incompletely condensed monosilylated silsesquioxanes (c-C5H9)7Si7O9(OSiRR'2)(OH)2 (SiRR'2 = SiMe3, SiMe2C(H)CH2, SiMePh2) were reacted with SiCl(4) in the presence of an amine which yielded the dichloro compounds (c-C5H9)7Si7O9(OSiRR'2)O2SiCl2 (1-3). These compounds could be hydrolyzed into the corresponding silsesquioxanes containing geminal silanols, (c-C5H9)7Si7O9(OSiRR'2)O2Si(OH)2 (4-6). At elevated temperatures, the geminal silsesquioxanes 4 and 5 undergo condensation reactions and form the closed-cage silsesquioxane monosilanol, (c-C5H9)7Si8O12(OH). The more sterically hindered geminal silsesquioxane 6 undergoes in solution intermolecular dehydroxylation, yielding the thermodynamically stable dimeric disilanol, [(c-C5H9)7Si7O9(OSiMePh2)(O2Si(OH)-)]2-(mu-O) (7). NMR and FT-IR studies show that the two silanols of the geminal silsesquioxanes 4-6 are different from each other with respect to hydrogen bonding, both in solution and in the solid state. Hydrogen bonding of the geminal silanol-containing silsesquioxanes was examined and compared to hydrogen bonding in silsesquioxanes possessing vicinal or isolated silanol groups. The relative Br?nsted acidity of the geminal silanols was determined using pK(ip) (ion-pair acidity) measurements in THF with UV-vis. These acidities were compared with those of other silsesquioxanes containing silanol groups. Acidities of 4-6 were found to be among the lowest known for silsesquioxanes.     

Textured macro- and mesoporous alumina samples designed in the presence of different surfactant types

This work presents a method that enables the synthesis of porous alumina in the presence of different types of surfactant. The method is based on a sol–gel transition, using surfactants and droplets of a nonpolar phase as templates. The main purpose was to establish a relationship between the templates and the resulting pore structure. The results show that depending on the type of surfactant used (ionic or nonionic), materials presenting variations in the pore family distribution, X-ray powder diffraction patterns and sample morphology were formed. During the synthesis of these alumina samples, the drying step caused loss of the porous structures, so the shrinkage due to different types of surfactants was evaluated.     

Effect of different types of substrate surface treatments on the graphene device performance

Graphene–substrate interface is very crucial for analyzing graphene device performance. In this article, we have shown how the graphene device performance got affected because of different types of substrate surface treatment techniques used before graphene transfer. For fabrication of graphene devices, monolayer chemical vapor deposition (CVD) graphene was transferred onto SiO₂ grown thermally on Si substrate. Forming gas annealed SiO₂/Si shows better device performance as compared with as-grown SiO₂ on Si substrate. A further effect of oxygen plasma and argon plasma cleaning of SiO₂ surface before graphene transfer was investigated. Forming gas annealing improves the performance and plasma treatment degrade the graphene devices' performance.     

Adsorption of carbon monoxide on Lewis acid sites of alumina

It has been found that carbon monoxide is adsorbed on Lewis acid sites of a high acid strength. Potential applicability of carbon monoxide as a gaseous base to determine the strength and amount of acid sites is suggested.

---

, . CO, , .

     

Platinum nanoparticles on different types of titanium dioxide surface: A quantum-chemical modeling

The interaction of a Pt₂₉ nanoparticle with pristine and reduced TiO₂ (110), (100), (101), and (100) surfaces in the rutile and anatase modifications has been modeled by the density functional theory method within the generalized gradient approximation (GGA). It has been demonstrated that the interaction energy of platinum particles with stoichiometric surfaces of titanium dioxide crystals is noticeably lower than for tin dioxide crystals. Like for SnO₂, the reduction of the surface leads in some cases to a significant increase in the energy of interaction with platinum. The reoxidation of such structures should result in platinum fixation on the surface.     

The chemistry of the surface of modified detonation nanodiamonds of different types

The influence of standard chemical treatment used to extract interstellar nanodiamonds from meteorites on the chemical composition of the surface of synthetic nanodiamonds with substantially different properties was studied by thermal desorption mass spectrometry and IR spectroscopy. The chemistry of the surface of nanodiamonds after treatment was substantially different from that of initial particles. The suggestion was made that the chemical structure of the surface of diamond particles in the interstellar space could be reconstructed from the data on meteorite diamonds. Mass spectrometric studies also gave information about possible mechanisms of the release of noble gases from meteorite diamonds at various temperatures.     

Dinitrogen: a selective probe for tri-coordinate Al "defect" sites on alumina

Dinitrogen selectively binds to tri-coordinate Al(III) sites of the (110) termination of γ- and δ-alumina, the "defects" responsible for the low temperature dissociation of methane. Similar observations on η-Al(2)O(3) and extra framework aluminium of microporous aluminosilicates also suggest the presence of Al(III) sites on these materials.     

Effect of different types of radiation on the composition of poly(phosphazene) surface

Changes in the composition of poly[bis(trifluoroethoxy)phosphazene] surface irradiated at ?? = 6700 Å (a laser), at ?? = 9.89 Å (1253.6 eV, X-ray Mg-K?? radiation), and at 4720 Å (a light emitting diode, (LED) for medical applications) were studied in situ by X-ray photoelectron spectroscopy. Both quantitative and qualitative changes in the surface composition compared to routine measurements of the polymer spectra are observed during an analysis of the surface upon long-term X-ray irradiation or with an increase in the X-ray radiation source power. These are the changes in the concentrations of elements and the appearance of additional states of carbon, oxygen, and nitrogen atoms. The composition of the surface irradiated with the laser and LED remains unchanged.     

A study of the surface modification of alumina for GC

Summary A gas chromatographic method for the separation of alkanes and alkenes present in coal mine air has been developed using modified alumina columns. The separation was carried out using a GC equipped with a gas sampling valve, a FID and a surface modified alumina packed column with helium as carrier gas.An investigation was carried out into the effects of surface modifiers on alumina. The study examined the change in retention properties on alumina modified by alkali metal salts and the specific effects of the halide anions and metal cations.The paper describes the preparation of the alumina columns and the effects on selectivity of post heating the stationary phase. The study demonstrated that alumina modified with 2% sodium chloride and post heated to 150°C was the most appropriate stationary phase.     

The growth of silver on an ordered alumina surface

The growth of Ag on an ordered Al2O3 surface was studied by low energy ion scattering spectroscopy (LEIS), scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and temperature programmed desorption (TPD). Three-dimensional (3D) growth of Ag clusters was observed with STM and LEIS, with the cluster size increasing with Ag coverage. The XPS core level binding energies and the Auger parameters indicate a weak interaction between the Ag clusters and the Al2O3 support. Final state effects are determined to be the primary contribution to the Ag core level binding energy shift. Nonzero order kinetics was observed for Ag desorption in TPD with the Ag sublimation energy decreasing with decreasing cluster size.     

Carrol rearrangement on the surface of chromatographic grade alumina

Thermolysis on the surface of Al₂O₃ is proposed as a mild and convenient preparative method for /3,3/-sigmatropic Carrol rearrangement of acetoacetic esters of tertiary allyl alcohols into respective γ-δ-unsaturated ketones.     

Application of surface plasmon resonance spectroscopy for adsorption studies of different types of components on poly(dimethylsiloxane)

Surface plasmon resonance (SPR) spectroscopy is utilized to study in real-time and, by label-free means, the reversible and quasi-irreversible adsorption of small ionic or neutral molecules, pharmaceuticals, and proteins on poly(dimethylsiloxane) (PDMS) surfaces. The SPR sensor is covered with 0.2% (w/v) PDMS in octane. During the timescale of a typical lab-on-a-chip analysis or an electrophoretic separation, it was found that small neutral components containing a hydrophobic part do not adsorb or absorb onto PDMS, while larger, water-soluble polymer-like materials like proteins generally irreversibly adsorb to PDMS. The technique can be used to monitor the kinetics of adsorption and desorption of the molecules. For the non-specific adsorption of teicoplanin to PDMS, a Langmuir-like adsorption isotherm was obtained (K_d = 32 ± 2 μmol L⁻¹).     

Determination of acid sites on carbon surface

Pyridine chemisorbed on acid sites of active carbon was displaced by n-butylamine and the displaced amount was measured spectrophotometrically. This amount, supposed to be proportional to the surface concentration of carboxy groups, depends on the chemical pretreatment of active carbon.

---

, , . , , .

     

Surface plasmon resonance immunosensor for IgE analysis using two types of anti-IgE antibodies with different active recognition sites.

A simple and novel method for the determination of an IgE antibody based on a surface plasmon resonance immunosensor for the diagnosis of an allergy is described. The method involves the use of an anti-IgE(D) antibody and an anti-IgE(H) antibody, which reacts with the Ce2 domain and the Ce3 domain of the IgE antibody. The anti-IgE(D) antibody was immobilized on the gold surface of a sensor chip by physical adsorption. An IgE antibody sample was incubated by adding it to an anti-IgE(H) antibody solution to form an anti-IgE(H) immunocomplex through a reaction of the Ce3 domain of the IgE antibody. The incubated solution was introduced onto the sensor chip and the immunocomplex of the IgE-anti-IgE(H) then reacted with the anti-IgE(D) antibody immobilized on the sensor chip through the Ce2 domain of the IgE antibody part of the IgE-anti-IgE(H) immunocomplex. The detection limit of the present method for the determination of the IgE antibody was about 10 ppb. The affinity constants for the anti-IgE(H) antibody immunocomplex with the IgE antibody in solution and that of the anti-IgE(H) antibody immunocomplex with the IgE antibody immobilized on the sensor chip by a biotin-streptavidin interaction were estimated to be 4.1 x 10(7) M(-1) and 5.8 x 10(6) M(-1), respectively. The affinity constant for the immunocomplex of the anti-IgE(H) antibody with the IgE antibody with the anti-IgE(D) immobilized on the sensor chip was estimated to be 4.9 x 10(7) M(-1), 20-times larger than the affinity constant for the IgE antibody immunocomplex with the anti-IgE(D) antibody immobilized on the sensor chip, based on a direct immunoassay method of the IgE antibody under the same experimental conditions.     

Direct linkage of thrombin to its cell surface receptors in different cell types

When 125I-thrombin was incubated with foreskin fibroblasts, cervical carcinoma cells or fibrosarcoma cells of human origin, or with secondary chick embryo cells or Chinese hamster lung cells, it became directly linked to its cell surface receptors. The thrombin-receptor complex (TH-R) was derived exclusively from a pool of 125I-thrombin that had become specifically bound to the cell surface. The linkage was probably covalent, since the complex was resistant to boiling in sodium dodecyl sulfate and 2-mercaptoethanol. Raising the pH to 12 disrupted TH-R, but did not affect a similar complex between epidermal growth factor and its receptor, suggesting that the linkage of these mitogens to their receptors was different. Mild trypsin treatment removed the ability of cells to form TH-R; however, after a 24-h incubation in serum-free medium, trypsin-treated cells recovered the capacity to form TH-R, suggesting that TH-R resulted from interaction of 125I-thrombin with a cellular rather than a serum component. The mitogenic response of cells to thrombin was inversely related to the fraction of specifically bound 125I-thrombin represented by TH-R. The role of TH-R in mitogenesis may be clarified in future studies by obtaining clones of Chinese hamster lung cells that vary in their capacities to form TH-R and to respond to the mitogenic action of thrombin.     

Uncovering selective and active Ga surface sites in gallia–alumina mixed-oxide propane dehydrogenation catalysts by dynamic nuclear polarization surface enhanced NMR spectroscopy

Gallia–alumina (Ga,Al)₂O_3(x : y) spinel-type solid solution nanoparticle catalysts for propane dehydrogenation (PDH) were prepared with four nominal Ga : Al atomic ratios (1 : 6, 1 : 3, 3 : 1, 1 : 0) using a colloidal synthesis approach. The structure, coordination environment and distribution of Ga and Al sites in these materials were investigated by X-ray diffraction, X-ray absorption spectroscopy (Ga K-edge) as well as ²⁷Al and ⁷¹Ga solid state nuclear magnetic resonance. The surface acidity (Lewis or Brønsted) was probed using infrared spectroscopy with pyridine and 2,6-dimethylpyridine probe molecules, complemented by element-specific insights (Ga or Al) from dynamic nuclear polarization surface enhanced cross-polarization magic angle spinning ¹⁵N{²⁷Al} and ¹⁵N{⁷¹Ga} J coupling mediated heteronuclear multiple quantum correlation NMR experiments using ¹⁵N-labelled pyridine as a probe molecule. The latter approach provides unique insights into the nature and relative strength of the surface acid sites as it allows to distinguish contributions from Al and Ga sites to the overall surface acidity of mixed (Ga,Al)₂O₃ oxides. Notably, we demonstrate that (Ga,Al)₂O₃ catalysts with a high Al content show a greater relative abundance of four-coordinated Ga sites and a greater relative fraction of weak/medium Ga-based surface Lewis acid sites, which correlates with superior propene selectivity, Ga-based activity, and stability in PDH (due to lower coking). In contrast, (Ga,Al)₂O₃ catalysts with a lower Al content feature a higher fraction of six-coordinated Ga sites, as well as more abundant Ga-based strong surface Lewis acid sites, which deactivate through coking. Overall, the results show that the relative abundance and strength of Ga-based surface Lewis acid sites can be tuned by optimizing the bulk Ga : Al atomic ratio, thus providing an effective measure for a rational control of the catalyst performance.

Coordination geometry and Lewis acidity of Ga and Al (bulk and surface) sites in mixed oxide gallia–alumina nanoparticles is correlated with the performance in propane dehydrogenation.     

Interaction of platinum nanoparticles with different types of tin dioxide surface: Quantum-chemical modeling

The interaction of Pt₂₉ nanoparticles with pristine and reduced (110), (100), (011), and (001) SnO₂ surfaces has been modeled using the density functional theory method within the generalized gradient approximation (GGA). It has been demonstrated that, in some cases, the reduction of the surface leads to a considerable increase in the energy of interaction with platinum. The second oxidation of such structures should lead to the platinum fixation on the surface.