Simultaneous determination of the three main inorganic forms of nitrogen by ion chromatography

An ion chromatographic method for the determination of nitrite, nitrate and ammonium simultaneously is described. An appropriate eluent-column-detector combination for separating and detecting these ions is discussed. On a bifunctional ion-exchange column, nitrite and nitrate anions were separated by anion exchange and ammonium cation by cation exchange. Nitrite and nitrate were detected by UV spectrometry and ammonium using a chemically suppressed conductivity detector. The detection limits for the three ions were all below 0.02 ppm (w/w) and the relative standard deviations for the three ions were all less than 0.5%. Several samples such as water, soil and acid rain were analysed with this method and the recoveries of the three ions were all within 100 ± 5%. These results agreed well with those obtained by a standard method.     

玻璃标样结合硫内标归一定量技术在激光剥蚀-等离子体质谱分析硫化物矿物中的应用

以硬石膏矿物标样中Ca相对于S的灵敏度因子为基准,将玻璃标样中主量和痕量元素相对于Ca的灵敏度因子转换成元素相对于S的灵敏度因子,建立了多玻璃标样结合硫内标归一定量技术分析硫化物单矿物多元素的新方法。利用本方法分析了美国合成多金属硫化物矿物标样MASS-1中20种元素,主量元素分析结果的相对误差小于10%,痕量元素分析结果几乎都落在给定值±不确定度范围内。利用本方法对12个硫化物单矿物分析结果表明,绝大多数主量元素含量测定值的相对误差小于10%,且多数主量元素甚至优于以MASS-1为外标、内标归一定量法及内标校准法分析结果,而痕量元素与MASS-1校准结果较为一致。本方法克服了基体不匹配的问题,能比较准确地定量分析硫化物矿物中的主成分S,可用于定量校准硫化物矿物。     

EDTA滴定法测定分银渣中的铅含量

采用氟化铵-盐酸-硝酸-高氯酸溶解样品,加入氢溴酸除去样品中的砷、锑、锡等共存元素,加入硫酸将样品中的铅转化为硫酸铅沉淀,通过过滤与其它元素分离,滴定前加入巯基乙酸掩蔽铋,在乙酸-乙酸钠缓冲体系下,以二甲酚橙为指示剂,建立了采用EDTA络合滴定法测定分银渣中铅含量的方法。实验方法用于测定分银渣中的铅含量,测定结果的相对标准偏差(RSD,n=11)为0.32%～0.90%,加标回收率为100%～102%。能够满足日常测定需求。     

High-throughput determination of atrasentan in human plasma by high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry

Atrasentan (A-147627) is an endothelin antagonist receptor being developed at Abbott Laboratories for the treatment of prostate cancer. A quick and sensitive method for the determination of atrasentan in human plasma has been developed and validated using high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry. A dual-column, single mass spectrometer system is used to provide a reliable and routine means to increase sample throughput. The analytical method involves liquid-liquid extraction and internal standard (A-166790). The plasma samples and internal standard are acidified with 0.3 M hydrochloric acid prior to being extracted into 1:1 (v/v) hexanes--methyl t-butyl ether. The organic extract was evaporated to dryness using heated nitrogen stream and reconstituted with mobile phase. Atrasentan and internal standard were separated with no interference in a Zorbax SB-C(18) analytical column with 2.1 x 50 mm, 5 microm, and a Zorbax C(8) guard column using a mobile phase consisting of 50:50 (v:v) acetonitrile--0.05 M ammonium acetate, pH 4.5, at a flow rate of 0.30 mL/min to provide 4 min chromatograms. For a 250 microL plasma sample volume, the limit of quantitation was approximately 0.3 ng/mL. The calibration was linear from 0.30 to 98.0 ng/mL (r(2) > 0.995). A significant advantage of the method is the ability to employ parallel HPLC separations with detection by a single MS/MS system to provide sensitivity and selectivity sufficient to achieve robust analytical results with a lower limit of quantitation of 0.30 ng/mL and high throughput.     

Applicability of capillary electrophoresis to the analysis of trace rare earth elements in geological samples.

This study developed a methodology to analyze trace rare earth elements (REEs) in geological materials by capillary electrophoresis (CE). Changed from dilute HNO3 into a water medium by heating, REE ions are detectable at approximately 2 ng mL(-1). In the presence of coexisting elements from geological samples, REE separations were carried out. After sample fusion with Na2O2 and interference separation with ammonium pyrrolidinedithiocarbamate chelate, REE analytes were coprecipitated with Mg(OH)2 at pH 8.5, and then prepared into a water medium for CE determination. Using the standard addition method, this protocol was validated by analyses with better than 5% precision. This method was applied to geological materials; the REE results are in consistence with their certified values. With electrokinetic injection, internal standard (IS) selected among lanthanides is a prerequisite of high-quality REE data. An approach was proposed to derive the IS content for further correcting its contribution from unknown samples.     

Separation of iota-, kappa and lambda-carrageenans by capillary electrophoresis

The present study reports a novel method for the separation of the high-molecular-weight anionic polysaccharides, iota, kappa, and lambda carrageenans, in capillary electrophoresis (CE). Carrageenan samples are first derivatised with 9-aminopyrene-1,4,6-trisulfonic acid (APTS), separated in an ammonium acetate background electrolyte (BGE) and detected with laser-induced fluorescence (LIF). The effects of changes of instrumental parameters (temperature, injection mode, field strength) and the composition of the BGE (concentration and pH) are reported, and are explained in terms of the physical chemistry of the BGE and the biopolymers. Optimal separation conditions for kappa, iota, and lambda carrageenans, including an APTS internal standard, were found in a polyvinyl alcohol coated capillary with an ammonium acetate BGE of low concentration (25 mM) and moderate pH (8.0). This BGE gave the best reproducibility in tests on iota/kappa mixtures, with relative standard deviations (RSDs) in migration times and normalised peak areas (relative to the APTS internal standard) of less than 0.1% and 1%, respectively. Using this BGE at 50 degrees C and a voltage of 30 kV, all three carrageenan subtypes were separated in a run time of 3 min.     

Quantitative analysis of original and powdered rocks and mineral inclusions by laser ablation inductively coupled plasma mass spectrometry

Direct analysis of rocks by laser ablation inductively coupled plasma mass spectrometry is described. Both powdered standard rocks and the original rocks were analysed and the results agreed with each other in spite of the difference in the surface states. Microprobe analysis of biotite in granite JG1 was also done directly with a focused laser beam and the results obtained were very close to the solution values given by the conventional aqueous method using biotite separated from an original rock. For quantitative analysis, the measured signal intensity was normalized either by the ablated weight or the barium signal intensity. Forty-two major and minor elements (two of them being used as internal standards) in twelve standard rocks fromt the igneous rock series of the Geological Survey of Japan were determined successfully.     

基体归一定量技术在激光烧蚀-等离子体质谱法锆石原位多元素分析中的应用

探讨了内标法和基体归一法校准的基本原理。基体归一校准法的基本步骤为:先用简单外标法测得样品中尽可能全的主、次、痕量元素含量,氧化物加和后进行100%归一,得到灵敏度校正系数,对所有元素的测定结果进行修正。修正结果的可靠性在很大程度上取决于测定元素是否"完全"。由于锆石的基体元素组成简单且易于测定,很适合用基体归一法校准。在激光剥蚀-电感耦合等离子体质谱法(LA-ICP-MS)微区原位分析中,应用基体归一校准法的最大优点是:可以避免预先用其它微区分析技术对未知样品中的内标元素进行定量。该技术可适用于具有环带结构、难以找到均匀分布的内标元素的地质样品的元素空间分布测定。在高分辨ICP-MS(Element2)和NewWave-UV-213激光系统上,应用基体归一定量技术同时分析了锆石中主、次、痕量共54种元素。对未知锆石样品的分析,基体归一法与内标法结果的一致性令人满意。分析德国蛇纹岩标准玻璃ATHO-G中相对误差<25%的有52个元素,<10%的有36个元素;大多数元素的相对标准偏差<10%。     

Determination of homologues of quaternary ammonium surfactants by capillary electrophoresis using indirect UV detection

This investigation describes the simultaneous separation of two major non-chromophoric quaternary ammonium surfactants, alkyltrimethyl- and dialkyldimethylammonium compounds (ATMACs and DADMACs, respectively), by capillary electrophoresis (CE) using indirect UV detection. The most effective separation conditions was 10 mM phosphate buffer with 57.5% tetrahydrofuran and 3 mM sodium dodecyl sulfate (SDS) at pH 4.3, and the sample hydrodynamic injection of up to 20 s at 1 psi (approximately 60 nl), and an applied voltage of 25 kV (1 psi = 6.9 kPa). Specially, the selection of an appropriate chromophore and an internal standard (I.S.) to improve the peak identification and quantitation was systematically investigated. Decylbenzyldimethyl ammonium chloride (C10-BDMA+C-) as a chromophore with 3 mM sodium dodecyl sulfate provided the best detectability for all homologues. The reproducibility of the migration time and quantitative analysis can be improved by using tetraoctyl ammonium ion as an internal standard, giving the relative standard deviation (R.S.D.) less than 0.8% for the relative migration times, and 2.5-5.5% for the relative peak areas. A good linearity of CE analysis was obtained in the range of 1.0-20 microg/ml with r2 values of above 0.999. The analysis of cationic surfactants in commercial products of hair conditioners and fabric softeners was also performed. Electrospray mass spectrometric method was applied to evaluate the CE method, and the compatible results were obtained.     

冷焰ICP-MS法测定高纯稀土氧化物中铁和钙的研究

用冷焰技术对高纯稀土氧化物中Ｆｅ和Ｃａ的分析方法进行了研究。估算了测定范围和检出限,探讨了内标元素对基体影响的校正作用,测定了加标回收率,对半定量法（ＴＱ）和定量法（ＱＡ）的结果作了比较。表明冷焰条件下,痕量Ｆｅ的测定是可行的,但Ｃａ的测定结果仍不理想;ＱＡ法明显优于ＴＱ法。     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.     

Assay of 1-hydroxy-3-aminopropylidene-1,1-bisphosphonate and related bisphosphonates in human urine and plasma by high-performance ion chromatography

A method is described for the analysis of 1-hydroxy-3-aminopropylidene-1, 1-bisphosphonate and related bisphosphonates in human urine and plasma. Samples are spiked with 1-hydroxy-5-aminopentylidene-1,1-bisphosphonate as an internal standard and calcium chloride is added to precipitate the bisphosphonates. Following centrifugation the precipitate is redissolved in acetic acid, and the bisphosphonates are separated by high-performance ion chromatography on a Dionex AS7 column using nitric acid as mobile phase. The bisphosphonates are oxidised to orthophosphate using post-column addition of ammonium persulphate and this is followed by post-column reaction with molybdenum-ascorbate to yield the phosphomolybdate chromophore which is detected at 820 nm. A detection limit of 10 ng/ml is possible.     

Contributions to accuracy improvement of simultaneous ICP atomic emission spectrometry using multi-line measurements of analyte and internal standard elements Applications for the analysis of permalloy

For successful application of simultaneous ICP atomic emission spectrometry for major component determinations in multi-component materials the accuracy of the method has to be improved. As a contribution to solve this problem a combined procedure for multi-component standard sample preparation, optimum calibration and different variations of internal standard corrections is described. Variance-weighted multi-line calibrations give most accurate results. Internal standard corrections are effective, if the time-dependent spectral line intensity fluctuations of the standard and the analyte elements are well correlated. Their sensitivities against some responsible device parameter variations are investigated. On the basis of multi-line measurements of the analyte and internal standard elements a “group-selected internal standard correction” (GS-ISC) method is applied and results in relative errors of less than 1% even for extreme fluctuations of the raw intensities. For rapid routine determination methods of materials with variable element compositions the added line intensities of the internal standard element can be used to correct the added analyte line raw intensities (“intensity addition internal standard correction” (IA-ISC) method). These accuracy optimization procedures are applied for the analysis of the soft magnetic material permalloy using the internal standard element In.     

Detection of rare earth elements by post-column reaction with xylenol orange and cetylpyridinium bromide

Rare earth elements have been separated by HPLC on octadecyl-bonded silica gel, dynamically modified with ammonium dodecylsulfate, using aqueous solutions of α-hydroxyisobutyric acid as mobile phase. The requirements and characteristics of post-column reaction with xylenol orange and cetylpyridinium bromide were investigated and optimized, and the reaction found to be highly sensitive and sufficiently rapid. The absorbance of the complex at 598 nm was not affected by the presence of α-hydroxyisobutyric acid at concentrations of the latter up to 150 mmol/l; at higher concentrations of the acid, the absorbance decreased slightly. For most of the rare earth elements the response was linear up to 0.2 mmol/l; the relative standard deviation of peak area was, typically, ～1 %. The sensitivity of the method was usually better than 1 μg/ml. The results obtained from the determination of lanthanum, cerium, praseodymium, and neodymium in samples of apatite and bastnesite were in a good agreement with those obtained by ICP-AES.     

Determination of the N-methyl- -aspartate receptor NR2B subunit blocker Ro 63-1908 in rat, cynomolgus monkey and human plasma by high-performance liquid chromatography with column switching and fluorescence detection

A HPLC method with automated column switching was developed and validated for the determination of Ro 63-1908 in rat and cynomolgus monkey plasma. Human plasma was used for calibration and was also included in the validation process. Ro 63-1908 belongs to a class of neuroprotective N-methyl- -aspartate (NMDA) receptor blockers which were in development for the treatment of stroke and traumatic brain injury. The method involves deproteinisation of plasma samples with ethanol and direct injection of the supernatant (1.4 ml) into the HPLC column-switching system. To prevent a breakthrough of the analyte and the internal standard on the precolumn (Purospher RP-18, 75×4 mm) due to the high ethanol content, the injection solution was diluted, on-line, using an additional pump and a T-piece. 1% ammonium acetate–ethanol (100:2, v/v) was used as mobile phase for injection, as well as for on-line dilution, resulting in pre-concentration of the analyte and the internal standard on the precolumn. As Purospher RP-18 is a non-endcapped stationary phase with a special selectivity for amines, the analyte and the internal standard could then be selectively eluted with 30% acetonitrile (without any buffer in the mobile phase) and transferred to the analytical column [consisting of two coupled columns (125+250×4 mm) packed with Superspher 60 RP-select B], where they were separated by gradient elution and detected by fluorescence detection. Compared to the use of a 125 mm long precolumn and dilution of the supernatant with ammonium acetate prior to injection, the 75 mm precolumn and the on-line dilution procedure allowed about one third shorter run times (21 min) and, therefore, a higher sample throughput. The limit of quantification was 1 ng/ml using 0.4 ml plasma. The method was applied to more than 670 plasma samples from pharmacokinetic and toxicokinetic studies and is also suitable for other matrices and NMDA receptor blockers.     

Development and validation of liquid chromatography–mass spectrometry method for the determination of telmisartan in human plasma

A sensitive liquid chromatographic–electrospray ionization mass spectrometric method was developed and validated for fast determination of telmisartan in human plasma. Plasma of 0.1 mL was deprotienated with methanol, centrifugation, evaporation to dryness and dissolving in mobile phase, samples were separated using a Hypersil-Keystone C18 reversed-phase column (150 mm × 2.1 mm i.d., 5 μm), together with a mobile phase containing of acetonitrile–10 mM ammonium acetate (42:58, v/v), 0.2% acetic acid and was isocratically eluted at a flow rate of 0.2 mL/min. Telmisartan and its internal standard, valsartan, were measured by electrospray ion source in positive selective ion monitoring mode. The method demonstrated linearity from 1 to 2000 ng/mL (r = 0.9988). The limit of quantification for telmisartan in plasma was 1 ng/mL with good accuracy and precision. The mean sample extract recovery of the method were higher than 82 and 78% for telmisartan and internal standard (IS), respectively. The within-run and between-run precision ranged from 3.4 to 8.9% and 5.9 to 11.2% (relative standard deviation, R.S.D.), respectively.     

Simultaneous LC–MS–MS Determination of Zolmitriptan and Its Active Metabolite N-Desmethylzolmitriptan in Human Plasma

A specific and sensitive liquid chromatography-electrospray ionization tandem mass spectrometry method was developed for the determination of zolmitriptan and N-desmethylzolmitriptan in human plasma. The analytes and the internal standard (IS) paroxetine were extracted by liquid–liquid extraction with a mixture of saturated ethyl acetate:dichloromethane (4:1) and were separated using an isocratic mobile phase on a XTerra RP18 column. The mobile phase used was acetonitrile: 5 mM ammonium acetate: formic acid (50:50:0.053, v/v/v). Zolmitriptan and N-desmethylzolmitriptan in a range of 0.25–20 ng mL⁻¹ were easily quantified. The validated method can be applied to pharmacokinetic and bioequivalence studies.

     

硫酸铅分离-EDTA滴定法测定铜闪速冶炼烟尘中的铅

建立了用硫酸形成硫酸铅沉淀加以分离,再用EDTA络合滴定法测定铜闪速冶炼烟尘中铅量的方法。试样用盐酸、硝酸、硫酸、氟化氢铵和高氯酸溶解,用硫酸沉淀铅与其它干扰元素分离,沉淀溶解于乙酸-乙酸钠缓冲溶液中,以巯基乙酸掩蔽铋,抗坏血酸掩蔽铁,二甲酚橙作指示剂,用Na2EDTA标准滴定溶液滴定溶液中铅含量,采用火焰原子吸收光谱法测定滤液中铅含量加以补正。实验结果表明,沉淀时硫酸(1+24)加入量为50 mL,无水乙醇加入量为10 mL,乙酸-乙酸钠缓冲溶液加入量为30 mL。方法相对标准偏差(RSD)在0.35%~1.5%,加标回收率为在99.0%~101%。完全满足生产控制分析的要求,同时也可以作为类似物料中铅分析的参考方法。     

高效液相色谱法测定土壤中香豆素类灭鼠药残留

建立了测定土壤中杀鼠灵、杀鼠醚、溴敌隆、氟鼠灵、溴鼠隆5种香豆素类灭鼠药残留量的柱后衍生荧光检测高效液相色谱方法。样品在加入内标物氯杀鼠灵后用丙酮-氨水-甲醇（体积比为100：3：100）混合液提取,浓缩的提取液用5 mL正己烷-氯仿（体积比为3：1）混合液溶解,NH₂固相萃取小柱净化,用15 mL 50 mmol/L四丁基磷酸二氢铵甲醇溶液洗脱分析物,移除溶剂,用甲醇-0.25%（体积分数）乙酸水溶液（体积比为3：2）混合液溶解,过滤后,经高效液相色谱分离,以甲醇-氨水-水（体积比为1：1：8）混合液为衍生试剂进行柱后衍生,采用荧光检测器检测。杀鼠灵、杀鼠醚、溴敌隆、氟鼠灵、溴鼠隆5种鼠药在0.02～10.00 mg/L范围内线性关系良好,相关系数均大于0.999,定量限（LOQ,S/N=10）为2.2～18.5 μg/L。在0.1～0.3 mg/kg添加水平内,5种灭鼠药的回收率为94.6%～118.0%,相对标准偏差（RSD）为0.8%～10.2% （n=3）。实验结果表明该方法灵敏、准确,重复性好。     

EDTA滴定法测定再生锌原料中的锌含量

采用氟化铵-盐酸-硝酸-硫酸分解样品,氨水沉淀分离铁、锰、铅等共存元素,滤液中加入掩蔽剂掩蔽少量干扰元素,在pH=5～6的乙酸-乙酸钠缓冲溶液中,以二甲酚橙为指示剂,用EDTA标准滴定溶液滴定。测得结果为锌、镉合量,扣除镉量,即为锌量。方法用于测定再生锌原料中锌,结果的相对标准偏差(RSD,n=11)为0.15%～1.0%。按照实验方法对再生锌原料样品进行加标回收实验,回收率为99.1%～102%。能满足日常对再生锌原料中锌含量的检测要求。